The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Economic impact of integrating PCM as passive system in buildings using Fanger comfort model
Open accessAbstract
In buildings, HVAC systems consume a high amount of energy to provide thermal comfort for occupants. A methodology is presented in this paper to control thermostat operation of the buildings considering the effects of indoor and outdoor boundary conditions and phase change material (PCM) characteristics. EnergyPlus v8.1 building energy simulation software was used to analyze the energy performance of the PCM incorporated building models and to implement Fanger model to control HVAC thermostat operation according to BS EN 15251:2007 thermal comfort categories. Three types of building HVAC schedule, PCM with different melting points and layer thicknesses were studied for Madrid climate zone. Moreover, the impact of occupants clothing on the energy consumption was investigated. Furthermore, payback analysis was conducted to find out the economic benefits of PCM integration into the building envelopes. Application of PCM improved the cooling and heating energy performances except for the office model in winter (heating period). Additionally, higher energy savings and lower payback periods were observed when PCM with higher melting point was applied to the buildings. Eventually, energy savings in PCM incorporated models were found to improve further when occupants changed their clothing behavior in winter.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
World map of the Köppen-Geiger climate classification updated
Kottek, M., Grieser, J., Beck, C., Rudolf, B., & Rubel, F. (2006) · Meteorologische Zeitschrift · doi:10.1127/0941-2948/2006/0130 · Cited by 11,456
Review of thermal energy storage technologies based on PCM application in buildings
Pomianowski, M., Heiselberg, P., & Zhang, Y. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.08.006 · Cited by 474
Energy saving potential of phase change materials in major Australian cities
Alam, M., Jamil, H., Sanjayan, J., & Wilson, J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.04.027 · Cited by 238
Sage-Lauck, J. S., & Sailor, D. J. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.04.028 · Cited by 166
Cited by
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Du, K., Calautit, J., Wang, Z., Wu, Y., & Liu, H. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.005 · Cited by 688
Javadi, F. S., Metselaar, H. S. C., & Ganesan, P. (2020) · Solar Energy · doi:10.1016/j.solener.2020.05.106 · Cited by 386
Saffari, M., de Gracia, A., Fernández, C., & Cabeza, L. F. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.107 · Cited by 343
Self-citationKuczyński, T., & Staszczuk, A. (2020) · Energy · doi:10.1016/j.energy.2020.116984 · Cited by 131
Metadata
- Authors
- Saffari, M., de Gracia, A., Ushak, S., & Cabeza, L. F.
- Venue
- Energy and Buildings
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 112
- Pages
- 159-172
- ISSN
- 0378-7788 (ISSN-L)
- OpenAlex
- W2194280906
- Cited by
- 179
- References
- 4
- FWCI
- 17.13
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.