Performance assessment of a new hydrogen cooled prismatic battery pack arrangement for hydrogen hybrid electric vehicles
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
This paper proposes a new novel battery cooling system for hydrogen fueled HEVs that achieves more efficient cooling and driving, which increases vehicle driving range and enhances vehicle safety by maintaining the batteries at optimum operating conditions. The proposed system offers a novel use of the vehicle fuel and a novel cooling plate design. The cooling plate design is optimized in terms of battery's temperature uniformity and battery's maximum temperature. The optimum performance of the design is then investigated through a 600 s high intensity discharging and charging cycle of 4C. The results show that when hydrogen is at a temperature of 10 °C and has an inlet velocity of 0.01 m/s, the maximum temperature is maintained at lower than 30.5 °C. The lowest difference through the battery obtained by the proposed system is less than 7 °C. The performance of the proposed system is compared with the performance of liquid, air and evaporative cooling based systems. The comparison shows that the proposed system is able to perform better than liquid, air and evaporative cooling based cooling systems. The performance of the proposed cooling system demonstrates the advantage of integrating the hybrid vehicle fuel system with the battery cooling system.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Simulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057
Karimi, G., & Li, X. (2013) · International Journal of Energy Research · doi:10.1002/er.1956 · Cited by 411
Cited by
Akinlabi, A. A. H., & Solyali, D. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109815 · Cited by 428
Developments in battery thermal management systems for electric vehicles: A technical review
Tete, P. R., Gupta, M. M., & Joshi, S. S. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102255 · Cited by 388
A comparative study on battery thermal management using phase change material (PCM)
Verma, A., Shashidhara, S., & Rakshit, D. (2019) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2019.03.003 · Cited by 315
A review of thermal runaway prevention and mitigation strategies for lithium-ion batteries
Shahid, S., & Agelin-Chaab, M. (2022) · Energy Conversion and Management: X · doi:10.1016/j.ecmx.2022.100310 · Cited by 267
Temperature field and temperature difference of a battery package for a hybrid car
Ni, P., & Wang, X. (2020) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2020.100646 · Cited by 14
Metadata
- Authors
- Al-Zareer, M., Dincer, I., & Rosen, M. A.
- Venue
- Energy Conversion and Management
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 173
- Pages
- 303-319
- ISSN
- 0196-8904 (ISSN-L)
- OpenAlex
- W2887828494
- Cited by
- 45
- References
- 3
- FWCI
- 3.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.