Effects of excessive impregnation, magnesium content, and pyrolysis temperature on MgO-coated watermelon rind biochar and its lead removal capacity
Open accessThe DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
MgO-coated watermelon rind biochar (MWRB) is a potentially highly-effective waste-derived material in environmental applications. This research aims to provide valuable insights into the optimization of the production of MWRB for superior environmental performance. It was found that the Mg content of the MWRB could be easily controlled by adjusting the Mg/feedstock mass ratio during excessive impregnation. The BET surface area was found to first increase and then decrease as the Mg content of the MWRB (produced at 600 °C) increased from 1.52% to 10.1%, with an optimal surface area of 293 m2/g observed at 2.51%. Similarly, an optimum pyrolysis temperature of 600 °C was observed in the range of 400-800 °C for a maximum surface area of the MWRB at a fixed Mg/feedstock ratio of 0.48% (resulting in MWRBs with Mg contents of 1.89-2.51%). The Pb removal capacity of the MWRB (produced at 600 °C) increased with increasing Mg content, with a greatest Pb removal capacity of 558 mg/g found for the MWRB with the highest Mg content (10.1%), an improvement of 208% over the 181 mg/g Pb removal capacity of unmodified WRB produced at 600 °C. The Pb removal capacity of the MWRB (produced with 1.89-2.51% Mg) was also discovered to increase from 81.7 mg/g (at 400 °C) to 742 mg/g (at 700 °C), before dropping to 368 mg/g at 800 °C. These findings suggest that the MWRB can be more efficiently utilized in soil and water remediation by optimizing its synthesis conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biochar as a sorbent for contaminant management in soil and water: A review
Ahmad, M., Rajapaksha, A. U., Lim, J. E., Zhang, M., Bolan, N., Mohan, D., Vithanage, M., Lee, S. S., & Ok, Y. S. (2014) · Chemosphere · doi:10.1016/j.chemosphere.2013.10.071 · Cited by 4,662
Self-citationDynamic Molecular Structure of Plant Biomass-Derived Black Carbon (Biochar)
Keiluweit, M., Nico, P. S., Johnson, M. G., & Kleber, M. (2010) · Environmental Science & Technology · doi:10.1021/es9031419 · Cited by 3,230 · cited 4×
“Similarly, the peaks representing substituted aromatic C-H (1040 cm -1 ) (Keiluweit et al., 2010) was greatly enhanced after modification.”
InfluentialThe Art, Science, and Technology of Charcoal Production
Antal, M. J., & Grønli, M. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0207919 · Cited by 1,623 · cited 2×
“It slightly decreased to 250 m 2 /g at 700°C and then dropped to 59.8 m 2 /g at the final pyrolysis temperature of 800°C. Optimal pyrolysis temperatures for maximum surface area have also been observed in the range of 500-900°C in previous studies (Antal et al., 2003).”
InfluentialA review of biochar as a low-cost adsorbent for aqueous heavy metal removal
Inyang, M. I., Gao, B., Yao, Y., Xue, Y., Zimmerman, A., Mosa, A., Pullammanappallil, P., Ok, Y. S., & Cao, X. (2016) · Critical Reviews in Environmental Science and Technology · doi:10.1080/10643389.2015.1096880 · Cited by 1,397
Self-citationRajapaksha, A. U., Chen, S. S., Tsang, D. C. W., Zhang, M., Vithanage, M., Mandal, S., Gao, B., Bolan, N. S., & Ok, Y. S. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.01.043 · Cited by 1,322
Self-citationEffect of pyrolysis temperature, heating rate, and residence time on rapeseed stem derived biochar
Zhao, B., O'Connor, D., Zhang, J., Peng, T., Shen, Z., Tsang, D. C. W., & Hou, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.11.013 · Cited by 843 · cited 2×
“At relatively low temperatures ( 600°C), an increase of pyrolysis temperature facilitates the volatilization of organics and therefore increases the porosity of the formed biochar (Zhao et al., 2018).”
Self-citationCharacteristics of biochar and its application in remediation of contaminated soil
Tang, J., Zhu, W., Kookana, R., & Katayama, A. (2013) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2013.05.035 · Cited by 604
Li, R., Wang, J. J., Zhou, B., Awasthi, M. K., Ali, A., Zhang, Z., Lahori, A. H., & Mahar, A. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.02.125 · Cited by 406 · cited 4×
“The enhancement of MgO coating for biochar mainly involves enhanced surface area and pore structure fashioned by MgCl 2 activation, and increased buffering capacity owing to the MgO content (Li et al., 2016; Shen et al., 2018a).”
InfluentialSong, Y., Kirkwood, N., Maksimović, Č., Zheng, X., O'Connor, D., Jin, Y., & Hou, D. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.01.347 · Cited by 325 · cited 2×
“Therefore, biochar is increasingly regarded as a sustainable solution for water and soil remediation (Hou et al., 2018; O'Connor et al., 2018c; Song et al., 2019).”
Self-citationWan, S., Wu, J., Zhou, S., Wang, R., Gao, B., & He, F. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.10.188 · Cited by 243
Cited by
Sun, Y., Xiong, X., He, M., Xu, Z., Hou, D., Zhang, W., Ok, Y. S., Rinklebe, J., Wang, L., & Tsang, D. C. W. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130387 · Cited by 385
Self-citationSustainable soil use and management: An interdisciplinary and systematic approach
Hou, D., Bolan, N. S., Tsang, D. C. W., Kirkham, M. B., & O'Connor, D. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138961 · Cited by 378
Self-citationGupta, K., Joshi, P., Gusain, R., & Khatri, O. P. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.214100 · Cited by 331
Akhil, D., Lakshmi, D., Kartik, A., Vo, D.-V. N., Arun, J., & Gopinath, K. P. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01167-7 · Cited by 296
He, M., Xiong, X., Wang, L., Hou, D., Bolan, N. S., Ok, Y. S., Rinklebe, J., & Tsang, D. C. W. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125378 · Cited by 294
Self-citationLi, Y., Yu, H., Liu, L., & Yu, H. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.126655 · Cited by 287
Biomass-derived Biochar: From Production to Application in Removing Heavy Metal-Contaminated Water
Chen, W.-H., Hoang, A. T., Nižetić, S., Pandey, A., Cheng, C. K., Luque, R., Ong, H. C., Thomas, S., & Nguyen, X. P. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.02.061 · Cited by 201
Jeyasubramanian, K., Thangagiri, B., Sakthivel, A., Dhaveethu Raja, J., Seenivasan, S., Vallinayagam, P., Madhavan, D., Malathi Devi, S., & Rathika, B. (2021) · Fuel · doi:10.1016/j.fuel.2021.120243 · Cited by 197
Hou, R., Wang, L., O'Connor, D., Tsang, D. C. W., Rinklebe, J., & Hou, D. (2020) · Environment International · doi:10.1016/j.envint.2020.106040 · Cited by 110
Self-citationZhang, X., Cao, L., Xiang, W., Xu, Y., & Gao, B. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121295 · Cited by 110
Zhao, B., O’Connor, D., Shen, Z., Tsang, D. C. W., Rinklebe, J., & Hou, D. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.114687 · Cited by 95
Self-citationHou, R., Wang, L., Shen, Z., Alessi, D. S., & Hou, D. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125650 · Cited by 71
Self-citationUllah, M. H., & Rahman, M. J. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e36869 · Cited by 46
“It stands out among other available adsorbents due to its cost-effectiveness, large-scale applicability, environmental advantages, and high sorption capacity [41].”
Background
Metadata
- Authors
- Zhang, J., Hou, D., Shen, Z., Jin, F., O'Connor, D., Pan, S., Ok, Y. S., Tsang, D. C. W., Bolan, N. S., & Alessi, D. S.
- Venue
- Environmental Research
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 183
- Pages
- 109152
- ISSN
- 0013-9351 (ISSN-L)
- OpenAlex
- W3003084732
- Cited by
- 85
- References
- 16
- FWCI
- 4.17
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.