Cited by 116Surface Modification and SuperhydrophobicityIcing and De-icing Technologiesnanoparticles nucleation surface interactions

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Frost formation and anti-icing performance of a hydrophobic coating on aluminum

Wang, Zuo-Jia, Kwon, Dong-Jun, Lawrence DeVries, K., Park, Joung-Man·2015·Experimental Thermal and Fluid Science

DOI 10.1016/j.expthermflusci.2014.09.003

Open this paper in CoChat — free account

Integrity signals

Registry

Crossref · 10.1016/j.expthermflusci.2014.09.003

Cites

0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

A fundamental understanding of factors affecting frost nucleation
Na, B., & Webb, R. L. (2003) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(03)00194-7 · Cited by 225

Show all 0 references

Research works printed but not linked: 33

Kraj, 2010, Ses of icing on wind turbine blades characterized by ice accumulation, Renewable Energy, 35, 966, 10.1016/j.renene.2009.09.013 · DOI
Menini, 2009, Elaboration of Al2O3/PTFE icephobic coatings for protecting aluminum surfaces, Surf. Coat. Technol., 203, 1941, 10.1016/j.surfcoat.2009.01.030 · DOI
Lee, 2004, Frost formation on a plate with different surface hydrophilicity, Int. J. Heat Mass Transf., 47, 4881, 10.1016/j.ijheatmasstransfer.2004.05.021 · DOI
Wang, 2004, Discussions on hydrophobic surface for preventing frosting and speeding defrosting of heat pump, Energy Conserv. Technol., 22, 37
Nikulshina, 1979, The study of the influence of hydrophobic coating on thermal and aerodynamic characteristics of air coolers, Kholodilnaya Technika, 6, 28
Liu, 2007, Influences of surface hydrophilicity on frost formation on a vertical cold plate under natural convection conditions, Exp. Thermal Fluid Sci., 31, 789, 10.1016/j.expthermflusci.2006.08.004 · DOI
Liu, 2008, Frost formation on a super-hydrophobic surface under natural convection conditions, Int. J. Heat Mass Transf., 51, 5975, 10.1016/j.ijheatmasstransfer.2008.03.026 · DOI · Paper page
Farhadi, 2011, Anti-icing performance of superhydrophobic surfaces, Appl. Surf. Sci., 257, 6264, 10.1016/j.apsusc.2011.02.057 · DOI
Antonini, 2011, Understanding the effect of superhydrophobic coatings on energy reduction in anti-icing systems, Cold Reg. Sci. Technol., 67, 58, 10.1016/j.coldregions.2011.02.006 · DOI
Shin, 2003, Experimental study on frost structure on surfaces with different hydrophilicity: density and thermal conductivity, ASME J. Heat Transf., 125, 84, 10.1115/1.1518496 · DOI · Paper page
Xie, 2004, Facile creation of a bionic super-hydrophobic block copolymer surface, Adv. Mater., 16, 1830, 10.1002/adma.200400074 · DOI
He, 2010, Super-hydrophobic film retards frost formation, Soft Matter, 6, 2396, 10.1039/c0sm00024h · DOI
Wang, 2012, Effects of nano-fluorocarbon coating on icing, Appl. Surf. Sci., 258, 7219, 10.1016/j.apsusc.2012.04.043 · DOI
Su, 2006, A simple way to fabricate multi-dimension bionic superhydrophobic surface, Chin. J. Inorg. Chem., 22, 785
Song, 2006, Experimental research to fabricate super hydrophobic aluminum surface, J. Yangtze Univ., 3, 28
Feng, 2002, Super-hydrophobic surfaces: from natural to artificial, Adv. Mater., 14, 1857, 10.1002/adma.200290020 · DOI
Hsieh, 2006, Influence of fluorine/carbon atomic ratio on superhydrophobic behavior of carbon nanofiber arrays, J. Vac. Sci. Technol. B, 24, 113, 10.1116/1.2150224 · DOI
Jeong, 2001, Preparation of water-repellent glass by sol–gel process using perfluoroalkylsilane and tetraethoxysilane, J. Colloid Interface Sci., 235, 130, 10.1006/jcis.2000.7313 · DOI
Wu, 2002, Thin films with nanotextures for transparent and ultra water-repellent coatings produced from trimethylmethoxysilane by microwave plasma CVD, Chem. Vap. Deposition, 8, 47, 10.1002/1521-3862(20020304)8:2<47::AID-CVDE47>3.0.CO;2-# · DOI
Miwa, 2000, Effects of the surface roughness on sliding angles of water droplets on superhydrophobic surfaces, Langmuir, 16, 5754, 10.1021/la991660o · DOI
Bico, 1999, Pearl drops, Europhys. Lett., 47, 220, 10.1209/epl/i1999-00548-y · DOI
Wu, 2005, Fabrication of superhydrophobic surfaces from microstructured ZnO-based surfaces via a wet-chemical route, Langmuir, 21, 2665, 10.1021/la050275y · DOI
Zhao, 2006, A lotus-leaf-like superhydrophobic surface prepared by solvent-induced crystallization, ChemPhysChem, 7, 824, 10.1002/cphc.200500698 · DOI
Kulinich, 2009, Ice adhesion on super-hydrophobic surfaces, Appl. Surf. Sci., 255, 8153, 10.1016/j.apsusc.2009.05.033 · DOI
Kulinich, 2011, On ice-releasing properties of rough hydrophobic coatings, Cold Reg. Sci. Technol., 65, 60, 10.1016/j.coldregions.2010.01.001 · DOI
Menini, 2011, Highly resistant icephobic coatings on aluminum alloys, Cold Reg. Sci. Technol., 65, 65, 10.1016/j.coldregions.2010.03.004 · DOI
Wang, 2010, Ice accretion on superhydrophobic aluminum surfaces under low-temperature conditions, Cold Reg. Sci. Technol., 62, 29, 10.1016/j.coldregions.2010.02.005 · DOI
Park, 2009, Interfacial and hydrophobic evaluation of glass fiber/CNT–epoxy nanocomposites using electro-micromechanical technique and wettability test, Compos. A, 40, 1722, 10.1016/j.compositesa.2009.08.006 · DOI
Karim, 1998, Phase-separation-induced surface patterns in thin polymer blend films, Macromolecules, 31, 857, 10.1021/ma970687g · DOI
Wang, 2012, Surface control and cryogenic durability of transparent CNT coatings on dip-coated glass substrates, J. Colloid Interface Sci., 386, 415, 10.1016/j.jcis.2012.07.056 · DOI
Good, 1996, Hydrogen bonding and the interfacial component of adhesion: acid/base interactions of corona-treated polypropylene, J. Adhes., 59, 25, 10.1080/00218469608011074 · DOI
Dilsiz, 2000, Effect of acid-base properties of unsized and sized carbon fibers on fiber/epoxy matrix adhesion, Colloids Surf. A, 164, 325, 10.1016/S0927-7757(99)00400-8 · DOI
Owen, 1969, Estimation of the surface free energy of polymer, J. Appl. Polym. Sci., 13, 1741, 10.1002/app.1969.070130815 · DOI

Sorted by citations

Review of defrosting methods
Amer, M., & Wang, C.-C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.120 · Cited by 218
Fundamentals of icing and common strategies for designing biomimetic anti-icing surfaces
Li, Q., & Guo, Z. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03259a · Cited by 293
Review on the measurement and calculation of frost characteristics
Song, M., & Dang, C. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.03.094 · Cited by 212
Modus Operandi of Protective and Anti-icing Mechanisms Underlying the Design of Longstanding Outdoor Icephobic Coatings
Boinovich, L. B., Emelyanenko, A. M., Emelyanenko, K. A., & Modin, E. B. (2019) · ACS Nano · doi:10.1021/acsnano.8b09549 · Cited by 215
Managing water on heat transfer surfaces: A critical review of techniques to modify surface wettability for applications with condensation or evaporation
Edalatpour, M., Liu, L.-P., Jacobi, A., Eid, K., & Sommers, A. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.178 · Cited by 145
Research of anti-frosting technology in refrigeration and air conditioning fields: A review
Feng, W., Liang, C.-H., & Zhang, X. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.08.046 · Cited by 142
A hybrid strategy combining minimized leading-edge electric-heating and superhydro-/ice-phobic surface coating for wind turbine icing mitigation
Gao, L.-Y., Liu, Y., Ma, L., & Hu, H. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.03.112 · Cited by 110
Anti-frosting performance of superhydrophobic surface with ZnO nanorods
Zuo, Z.-P., Liao, R.-J., Zhao, X.-T., Song, X.-Y., Qiao, Z.-W., Guo, C., Zhuang, A.-Y., & Yuan, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.145 · Cited by 109
Suppression of Frost Nucleation Achieved Using the Nanoengineered Integral Humidity Sink Effect
Sun, X., & Rykaczewski, K. (2017) · ACS Nano · doi:10.1021/acsnano.6b07505 · Cited by 67
Interfacial properties and water resistance of epoxy and CNT-epoxy adhesives on GFRP composites
Shin, P., Kwon, D., Kim, J.-H., Lee, S.-I., Devries, K., & Park, J.-M. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.01.026 · Cited by 65
Self-citation
Anti-frosting performance of sprayable superhydrophobic coating suitable for outdoor coil of air source heat pump
Wang, F., Zhou, Y., Yang, W., Ni, M., Zhang, X., & Liang, C. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.114967 · Cited by 60
Anti-icing/frosting and self-cleaning performance of superhydrophobic aluminum alloys
Feng, L., Yan, Z., Shi, X.-T., & Sultonzoda, F. (2018) · Applied Physics A · doi:10.1007/s00339-017-1509-x · Cited by 59
Anti-icing performance and durability of suspension plasma sprayed TiO2 coatings
Sharifi, N., Dolatabadi, A., Pugh, M., & Moreau, C. (2019) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2018.11.018 · Cited by 58
“[31,32] that do not necessarily represent in-flight icing conditions which involves water microdroplets impinging on the surface with relatively high velocity.”
Background
An experimental study on the detrimental effects of deicing fluids on the performance of icephobic coatings for aircraft icing mitigation
Zhang, Z.-C., Lusi, A., Hu, H.-Y., Bai, X.-J., & Hu, H. (2021) · Aerospace Science and Technology · doi:10.1016/j.ast.2021.107090 · Cited by 55
Experimental study of cyclic frosting and defrosting on microchannel heat exchangers with different coatings
Pu, L., Liu, R., Huang, H., Zhang, S., Qi, Z., Xu, W., & Zhou, J. (2020) · Energy and Buildings · doi:10.1016/j.enbuild.2020.110382 · Cited by 50
Zwitterionic polymer brush coatings with excellent anti-fog and anti-frost properties
Ezzat, M., & Huang, C.-J. (2016) · RSC Advances · doi:10.1039/c6ra12399f · Cited by 50
Effect of Graphene Coating on the Heat Transfer Performance of a Composite Anti-/Deicing Component
Chen, L., Zhang, Y.-D., & Wu, Q. (2017) · doi:10.3390/coatings7100158 · Cited by 47
Defrosting performance of superhydrophobic fin-tube heat exchanger
Feng, W., Liang, C.-H., Zhang, Y., & Zhang, X. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.028 · Cited by 47
Feasible fabrication of a wear-resistant hydrophobic surface
Xiao, S., Hao, X., Yang, Y.-F., Li, L., He, N., & Li, H. (2019) · Applications of Surface Science · doi:10.1016/j.apsusc.2018.09.030 · Cited by 46
Delayed condensation and frost formation on superhydrophobic carbon soot coatings by controlling the presence of hydrophilic active sites
Esmeryan, K., Castano, C., Mohammadi, R., Lazarov, Y., & Radeva, E. (2018) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aaa188 · Cited by 45
Frosting and defrosting behavior of slippery surfaces and utilization of mechanical vibration to enhance defrosting performance
Heu, C. S., Kim, S. W., Kim, J., Lee, S., Kim, J. M., Lee, K.-S., & Kim, D. R. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.04.146 · Cited by 45
A study of frost build-up on hydrophilic and hydrophobic surfaces under forced convection conditions
Hermes, C. J. L., Nascimento, V. S., Loyola, F. R., Cardoso, R. P., & Sommers, A. D. (2019) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2018.08.009 · Cited by 44
Frosting Phenomenon and Frost-Free Technology of Outdoor Air Heat Exchanger for an Air-Source Heat Pump System in China: An Analysis and Review
Zhang, Y., Zhang, G.-M., Zhang, A., Jin, Y., Ru, R.-R., & Tian, M.-C. (2018) · Energies · doi:10.3390/en11102642 · Cited by 37
Combating Frosting with Joule-Heated Liquid-Infused Superhydrophobic Coatings.
Elsharkawy, M., Tortorella, D., Kapatral, S., & Megaridis, C. (2016) · Langmuir · doi:10.1021/acs.langmuir.6b00064 · Cited by 37
Technological advancements for anti-icing and de-icing offshore wind turbine blades
Quayson-Sackey, E., Nyantekyi-Kwakye, B., & Ayetor, G. K. (2024) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2024.104400 · Cited by 36
Trilaminar structure hydrophobic graphene oxide decorated organosilane composite coatings for corrosion protection
Liang, J., Wu, X.-W., Ling, Y.-H., Yu, S., & Zhang, Z.-J. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.02.002 · Cited by 36
Effect of surface characteristics on condensate droplets growth
Sheng, W., Pei, Y., Li, X., Ming, P., & Zhao, W.-L. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115260 · Cited by 35
Assessment of direct image processing methods to measure the apparent contact angle of liquid drops
Biolè, D., Wang, M., & Bertola, V. (2016) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.04.006 · Cited by 34
“The contact angle of a drop deposited on a solid surface, defined as the angle between the solid surface and liquid–air interface on the side of the liquid phase, is probably the most important quantity of surface science, which is used to characterize the wettability of solid surfaces [1–4], drop condensation or evap…”
Background
Experimental and theoretical study of frost melting water retention on fin surfaces with different surface characteristics
Liang, C.-H., Feng, W., Lu, Y., Yang, M.-T., & Zhang, X. (2016) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2015.10.015 · Cited by 33
A numerical study on frosting and its early stage under forced convection conditions with surface and environmental factors considered
Lei, S., Song, M., Pekař, L., & Shen, J. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101202 · Cited by 32
A semi-empirical correlation for predicting the frost density on hydrophilic and hydrophobic substrates
Sommers, A., Napora, A., Truster, N., Caraballo, E., & Hermes, C. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.10.025 · Cited by 32
Sessile droplet freezing on polished and micro-micro-hierarchical silicon surfaces
Wang, Y., & Wang, Z.-G. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.068 · Cited by 31
Self-citation
A review of recent progress in active frost prevention/control techniques in refrigeration and HVAC systems
Sarmiento, A. P., de Sá Sarmiento, F. I. P., Shooshtari, A., & Ohadi, M. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123680 · Cited by 29
Durability and Degradation Mechanisms of Antifrosting Surfaces.
Hoque, M. J., Yan, X., Qiu, H.-Y., Qin, Y., Du, X.-Z., Stermer, J., & Miljković, N. (2023) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.2c21928 · Cited by 29
Delayed Frost Growth on Nanoporous Microstructured Surfaces Utilizing Jumping and Sweeping Condensates
Mohammadian, B., Annavarapu, R. K., Raiyan, A., Nemani, S. K., Kim, S., Wang, M., & Sojoudi, H. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c00413 · Cited by 29
Preparation and Performance Test of the Super-Hydrophobic Polyurethane Coating Based on Waste Cooking Oil
Cheng, Y., Miao, D.-J., Kong, L.-X., Jiang, J., & Guo, Z.-X. (2019) · doi:10.3390/coatings9120861 · Cited by 27
Fabrication of micro-patterned aluminum surfaces for low ice adhesion strength
Jeon, J., Jang, H., Chang, J., Lee, K.-S., & Kim, D. R. (2018) · doi:10.1016/j.apsusc.2018.01.099 · Cited by 27
Visualization study of the effect of surface contact angle on frost melting process under different frosting conditions
Feng, W., Liang, C.-H., & Zhang, X. (2016) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2016.01.008 · Cited by 27
Evaporator Frosting in Refrigerating Appliances: Fundamentals and Applications
Hermes, C. J. L., Boeng, J., Silva, D. L. D., Knabben, F. T., & Sommers, A. D. (2021) · Energies · doi:10.3390/en14185991 · Cited by 31
Droplet evaporation dynamics on microstructured biphilic, hydrophobic, and smooth surfaces
Günay, A. A., Kim, M.-K., Yan, X., Miljkovic, N., & Sett, S. (2021) · Experiments in Fluids · doi:10.1007/s00348-021-03242-3 · Cited by 30
Interfacial and wetting properties between glass fiber and epoxy resins with different pot lifes
Shin, P., Baek, Y., Kim, J.-H., Park, H.-S., Kwon, D., Lee, J.-H., Kim, M., Devries, K., & Park, J.-M. (2018) · doi:10.1016/j.colsurfa.2018.02.017 · Cited by 26
Self-citation
A Review on Research Progress in Plasma-Controlled Superwetting Surface Structure and Properties
Li, D.-Y., Xu, K., & Zhang, Y.-J. (2022) · Polymers · doi:10.3390/polym14183759 · Cited by 25
“[109] used an aluminate coupling agent to produce hydrophobic surface on aluminum surface.”
Method
Experimental investigation of condensation and freezing phenomena on hydrophilic and hydrophobic graphene coating
Haque, M. R., Das, S. R., & Betz, A. R. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113987 · Cited by 25
Image processing for frost thickness measurement in fin-and-tube heat exchangers
Lee, W.-J., & Kyung Kwon, O. (2021) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2021.100937 · Cited by 25
Smooth and Transparent Films Showing Paradoxical Surface Properties: The Lower the Static Contact Angle, the Better the Water Sliding Performance.
Kaneko, S., Urata, C., Sato, T., Hönes, R., & Hozumi, A. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b00206 · Cited by 24
Frosting behavior of louvered-fin and tube heat exchanger after surface treatment: Experimental analysis
Ye, Z., Shi, J., & Chen, J. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117066 · Cited by 23
Facile preparation of a slippery oil-infused polymer surface for robust icephobicity
Zhao, L., He, L., Liang, J.-Y., Chen, Y., Jia, M.-J., & Huang, J.-Z. (2020) · doi:10.1016/j.porgcoat.2020.105849 · Cited by 22
Effect of hydrophobic surfaces on frost retardation in fin-tube heat exchangers with various fin pitches
Lee, W.-J., Bae, K. J., & Kwon, O. K. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115424 · Cited by 22
Early stage condensation frosting characteristics on plain and nano Al2O3-epoxy mixture-coated brass
Wang, Y., & Cheng, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.113971 · Cited by 19
An Experimental Study on Icing Physics for Wind Turbine Icing Mitigation
Guo, H., Zhang, K., Waldman, R. M., & Hu, H. (2017) · doi:10.2514/6.2017-0918 · Cited by 18
A Review: Mechanical and Interfacial Properties of Composites after Diverse Types of Aging Using Micromechanical Evaluation
Shin, P., Kim, J.-H., Park, H.-S., Baek, Y., Lee, S.-I., Devries, K., & Park, J.-M. (2020) · Fibers And Polymers · doi:10.1007/s12221-020-9700-7 · Cited by 17
Self-citation
Defrosting performance on hydrophilic, hydrophobic, and micro-patterned gradient heat transfer surfaces
Schmiesing, N. C., & Sommers, A. (2017) · Science and Technology for the Built Environment · doi:10.1080/23744731.2017.1333876 · Cited by 17
“Interestingly, recent articles, such as Liu et al. (2008), Wang et al. (2015), Fang and Amirfazli (2014), and Cai et al. (2011) have shown that super-hydrophobic surfaces may be able to restrain frost growth on the surface due to the high energy barrier for frost crystal nucleation on these…”
Background
The impact of high humidity on the ice-phobicity of copper-based superhydrophobic surfaces
Zheng, L.-Q., Shafack, R., Walker, B. R., & Chan, K.-C. (2017) · doi:10.1177/1847980417707174 · Cited by 17
An experimental study on frosting and hybrid defrosting of a cold flat plate under natural convection
Amer, M., & Wang, C. (2020) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120560 · Cited by 16
Thermal-hydraulic performance enhancement of fin-and-tube heat exchangers using carbon nanotube coatings under dry and wet conditions
Seok, H., Han, C.-H., Lee, D.-C., & Kim, Y. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120938 · Cited by 16
Antifrosting Performance of a Superhydrophobic Surface by Optimizing the Surface Morphology.
Jiang, S., Zhang, H., Jiang, C.-Y., & Liu, X.-W. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c01618 · Cited by 16
An Experimental Study on Mitigating Dynamic Ice Accretion Process on Bridge Cables with a Superhydrophobic Coating
Peng, Y., Veerakumar, R., Zhang, Z.-C., Hu, H.-Y., Liu, Y., He, X.-H., & Hu, H. (2021) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2021.110573 · Cited by 15
An Experimental Investigation on the Dynamic Ice Accretion Process over the Surface of a Wind Turbine Blade Model
Gao, L.-Y., Liu, Y., & Hu, H. (2017) · doi:10.2514/6.2017-3582 · Cited by 15
Temperature Dependent Anti-Icing Performance of the Microstructure Surface: Wettability Change and Ice Nucleation
Lu, Y. (2023) · Coatings · doi:10.3390/coatings13091485 · Cited by 14
Effects of molecular weight of urea–formaldehyde resins on wettability and adhesion at wood surface, interphase, and plywood
Kim, M., & Park, B.-D. (2022) · Wood Science and Technology · doi:10.1007/s00226-022-01420-y · Cited by 14
“The contact angle is formed at an equilibrium of the surface energy ( L ) of the liquid, the interfacial energy ( SL) between the solid and the liquid, and the surface energy ( S ) of the solid substrate (Wang et al. 2015; Shin et al. 2018).”
Background
Observation of sessile droplet freezing on textured micropillar surfaces via visualization and thermography
Wang, Y., & Wang, Z.-G. (2019) · Journal of Coatings Technology and Research · doi:10.1007/s11998-018-00163-5 · Cited by 14
Self-citation
A new method for measuring the contact angles from digital images of liquid drops.
Mirzaei, M. (2017) · Micron · doi:10.1016/j.micron.2017.09.001 · Cited by 13
Performance improvement of vapor compression heat pump with superhydrophobic finned-tube evaporator
Li, R., Wang, Z.-S., Zhang, Y., Li, Z., Luo, X.-W., Lu, W.-Z., & Gu, Z. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109013 · Cited by 11
Self-citation
Predictions on frost growth over a flat plate using surface characteristics: Machine learning methods
Han, J. M., Park, S. H., Park, Y. G., Pandey, S., & Ha, M. Y. (2022) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2022.12.017 · Cited by 10
A framework for classification of snow- and icephobicity
Borrebæk, P.-O. A., Rønneberg, S., Jelle, B. P., Klein-Paste, A., Zhang, Z.-L., & He, J.-Y. (2020) · doi:10.1080/01694243.2020.1834286 · Cited by 11
“Such an approach has been utilized previously [25], though, not always in a standardized quantitative manner required for the present purposes [26].”
Background
Multi-stage heat pump with two-phase injection for cold climate applications implementing natural refrigerants
Fix, A., Kang, D., Siam, M. M. H., Hwang, Y., & Radermacher, R. (2025) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2025.125474 · Cited by 10
Performance comparison of refrigerators integrated with superhydrophobic and superhydrophilic freezer evaporators
Ghaddar, D., Boyina, K., Chettiar, K., Hoque, M. J., Baker, M., Bhalerao, P., Reagen, S., & Miljković, N. (2023) · Applied Physics Letters · doi:10.1063/5.0157647 · Cited by 10
Characterization of Methyl-Functionalized Silica Nanosprings for Superhydrophobic and Defrosting Coatings.
Corti, G., Schmiesing, N. C., Barrington, G. T., Humphreys, M. G., & Sommers, A. (2019) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.8b18873 · Cited by 10
Accelerated freezing due to droplet pinning on a nanopillared surface
Bohm, R., Haque, M. R., Qu, C., Kinzel, E., & Betz, A. R. (2018) · AIP Advances · doi:10.1063/1.5048933 · Cited by 10
The effect of surface wettability on frost melting
Liu, Y., & Kulacki, F. A. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.104 · Cited by 10
Per-fluorinated chemical free robust superhydrophobic copper surface using a scalable technique
Chaitanya, B., Gunjan, M., Sarangi, R., Raj, R., & Thakur, A. D. (2021) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2021.125667 · Cited by 9
The theoretical analysis and experimental study on anti-frosting performance of surface characteristics
Li, L., Liu, Z., Zhao, L., & Li, Y. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.12.001 · Cited by 10
Evaluation of surface roughness and frost retardancy of a glass fiber/unsaturated polyester composite
Kim, J.-H., Kwon, D., Shin, P., Baek, Y., Park, H.-S., Devries, K., & Park, J.-M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.094 · Cited by 8
Self-citation
Guiding Ambient Vapor to Condense at the Fixed Pattern on Micronano Hierarchically Aluminum Substrate for Antifrost Application
Cui, G., Yin, H., Zhou, W., Yang, C. C., Xu, Z., & Wang, G. (2024) · ACS Applied Nano Materials · doi:10.1021/acsanm.4c00703 · Cited by 8
Preparation and performance of nanoparticles-based anti-frosting transparent hydrophobic surfaces
Fan, P., Li, Y., Liu, Z., Yu, F., Chen, Y., & Li, Y. (2021) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.05.024 · Cited by 9
Fabrication of an Anti-Icing Aluminum Alloy Surface by Combining Wet Etching and Laser Machining
Xia, A., He, L., Qie, S., Zhang, J., Li, H., He, N., & Hao, X. (2022) · Applied Sciences · doi:10.3390/app12042119 · Cited by 6
Development Of Anti-Reflective And Self-Cleaning Sio2Nanoparticles Coatings For Photovoltaic Panels
Alam, K., Fareed, S., Khan, U. A., Khan, S., Farooq, M., Abdul-Shakoor, & Saher, S. (2019) · 2019 International Conference on Electrical, Communication, and Computer Engineering (ICECCE) · doi:10.1109/icecce47252.2019.8940647 · Cited by 6
Physical mechanisms for delaying condensation freezing on grooved and sintered wicking surfaces
Stallbaumer-Cyr, E. M., Derby, M., & Betz, A. R. (2022) · Applied Physics Letters · doi:10.1063/5.0105412 · Cited by 5
Evaluation of Interfacial and Mechanical Properties of Glass Fiber/Poly-Dicyclopentadiene Composites with Different Post Curing at Ambient and Low Temperatures
Park, H.-S., Shin, P., Kim, J.-H., Baek, Y., Kwon, D., Lee, W., Devries, K., & Park, J.-M. (2018) · Fibers And Polymers · doi:10.1007/s12221-018-8491-6 · Cited by 5
Self-citation
An Experimental Investigation on an Electric-Thermal Strategy for Wind Turbines Icing Mitigation
Gao, L.-Y., Liu, Y., Kolbakir, C., & Hu, H. (2018) · 2018 Atmospheric and Space Environments Conference · doi:10.2514/6.2018-3658 · Cited by 5
Experimental investigation of coupled thermal-flow mechanisms of plasma actuation for anti-icing on finite wings
Chen, Z., Ma, J., Hui, W., Meng, X., & Yi, X. (2026) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2026.111748 · Cited by 4
Evaluation method for anti-/de-icing properties of topcoat surfaces treated with deicing fluid
Lee, D., Yang, S. B., Kim, J.-H., Lim, H. M., Park, J., & Kwon, D.-J. (2025) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2025.109763 · Cited by 1
Self-citation
Freeze-resistant wearable strain sensors based on hyperbranched cellulose nanofiber hydrogels
Tao, H., Yu, X., Li, L., Angeles, M. D. L., & Wang, N. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.106731 · Cited by 4
Advances in hydrophobic thin film coatings: A review on anti-icing surface technologies
Vyas, V., Chauhan, K. V., & Rawal, S. (2024) · Materials Today: Proceedings · doi:10.1016/j.matpr.2024.05.078 · Cited by 4
The Glaze Icing Performance of a Robust Superhydrophobic Film Composed of Epoxy Resin and Polydimethylsiloxane
Zhuang, A.-Y., Li, C., Yu, J., & Lu, Y. (2023) · Coatings · doi:10.3390/coatings13071271 · Cited by 4
Visualization of cold surface frosting
Xia, P., Fan, L., Xu, C., Diao, Y., Lin, Y., & Lai, F.-Y. (2023) · Journal of Physics, Conference Series · doi:10.1088/1742-6596/2422/1/012013 · Cited by 4
Enhancing Defrosting Efficiency Through Hierarchical Superhydrophobic Surface
Zhang, J., Shang, Y., Li, D., & Tang, P. (2025) · Heat Transfer Engineering · doi:10.1080/01457632.2025.2489704 · Cited by 3
Polytetrafluoroethylene coating effects on the ice formation rate over the submerged tubes with various materials and roughness: An experimental study
Siahtiri, M., Jannesari, H., & Chini, S. F. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111081 · Cited by 3
An Experimental Study on Ice Accretion and Anti-/De-Icing of a Pitot Tube
Hu, H.-Y., Al-Masri, F., & Hu, H. (2022) · AIAA SCITECH 2022 Forum · doi:10.2514/6.2022-1913 · Cited by 3
Advances in frosting suppression air source heat pump device: definition and classification
Lin, Y., Wang, W., Luo, J., Wang, S.-Q., Wei, W.-Z., Luo, Q., Sun, Y.-Y., & Dai, C.-M. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116455 · Cited by 2
Advances in defrosting: exploring the use of surface treatment to promote frost layer delamination.
Sommers, A. D., Schmiesing, N. C., & Corti, G. (2025) · Philosophical transactions. Series A, Mathematical, physical, and engineering sciences · doi:10.1098/rsta.2024.0359 · Cited by 2
Critical insights into anti-icing mechanisms of superhydrophobic coatings & impact of surface features and material engineering: a comprehensive review
Mehta, A., Vasudev, H., Singh, J., Ranakoti, L., Singh, S., Kumar, M., & Agarwal, A. (2026) · Journal of Materials Science: Materials in Engineering · doi:10.1186/s40712-026-00512-y · Cited by 1
“Therefore, the durability and mechanical properties of the transparent solid coating were analyzed using nano-indentation, and the environmental impact of the coatings was also analyzed (Wang et al. 2015).”
An Experimental Study on Pitot Probe Icing Protection with an Electro-Thermal/Superhydrophobic Hybrid Strategy
Hu, H.-Y., Al-Masri, F., & Hu, H. (2025) · Aerospace · doi:10.3390/aerospace12100862 · Cited by 1
“Because of the benefits of cheap installation costs and minimal energy consumption, passive anti-/de-icing techniques employing hydro-/ice-phobic coatings/materials are being developed for usage as practical options for aircraft icing mitigation in recent decades [31,32].”
An Experimental Study to Explore the Feasibility of Using Graphene for Aircraft Anti-/De-icing
Eluchie, C., Hu, H.-Y., Johnson, Z. T., Gomes, C. L., Claussen, J., & Hu, H. (2023) · AIAA AVIATION 2023 Forum · doi:10.2514/6.2023-4277 · Cited by 1
Spontaneous peeling of ice accretion: A novel expansion force de-icing unit based on phase transition time lag
Hao, T.-H., Zhang, X.-Y., Lei, Y., Guo, H.-T., & Zhang, J. (2023) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2023.103801 · Cited by 1
Mesoscopic investigation of frost crystal nucleation on cold surface based on the lattice-Boltzmann method
Gong, J., Hou, J., Yang, L., Wu, W.-F., Li, G., & Gao, T.-Y. (2019) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-019-0343-9
Deep learning-based defrosting control strategy for air-source heat pumps utilizing electronic expansion valve opening patterns
Choi, J., Kim, J., Roh, J., & Kim, Y. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.132460
Process simplification for digital inkjet pretreatment enhances color performance, flame retardancy, and eco-economic benefits of abaca window shades
Kim, H., Song, S.-H., Kim, S.-Y., Han, M.-W., Ji, H., Yang, S., & Kwon, D. (2026) · Applications of Surface Science · doi:10.1016/j.apsusc.2026.167291
Self-citation
Plasma-Enhanced Chemical Vapor Deposition Fabrication of Organosilicon Superhydrophilic Antifogging Coatings: The Effect of Deposition Voltage.
Li, X., Zhang, S.-H., Liu, Z., & Yan, K. (2026) · Langmuir · doi:10.1021/acs.langmuir.6c00162
Preliminary Assessment of Thermal and Mechanical Properties of a Graphene-Rich Carbon Coating on 3003-H14 Aluminum Alloy for Potential Anti-Icing Applications
Almomani, A. M., Alkhasawneh, M., Almomani, M., & Bani-Hani, M. A. (2026) · Materials · doi:10.3390/ma19061150
“Wang et al. [62] demonstrated that graphene-infused silicone rubber surfaces effectively resisted oil penetration and chemical pollution, maintaining surface functionality in aggressive environments.”

Authors: Wang, Z.-J., Kwon, D.-J., Lawrence DeVries, K., & Park, J.-M.
Affiliations: Gyeongsang National University (KR)
Corresponding author: Park, Joung-Man
ORCID: Kwon, Dong-Jun
Park, Joung-Man
Venue: Experimental Thermal and Fluid Science
Publisher: Elsevier BV
Published: 2015-01
Volume: 60
Pages: 132-137
ISSN: 0894-1777 (ISSN-L)
DOI: 10.1016/j.expthermflusci.2014.09.003
OpenAlex: W1982062205
Cited by: 116
References: 0
Citations by year: 2026: 6 · 2025: 11 · 2024: 8 · 2023: 9 · 2022: 8 · 2021: 10 · 2020: 11 · 2019: 10 · 2018: 20 · 2017: 12 · 2016: 9 · 2015: 2
FWCI: 3.02
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Experimental Thermal and Fluid Science (publishedVersion)
Topics: Physical Sciences › Materials Science › Surfaces, Coatings and Films › Surface Modification and Superhydrophobicity
Physical Sciences › Engineering › Aerospace Engineering › Icing and De-icing Technologies
Physical Sciences › Chemistry › Physical and Theoretical Chemistry › nanoparticles nucleation surface interactions
Keywords: hydrophobic coatings, frost formation, anti-icing, aluminum surfaces, aluminate coupling agent, contact angle, surface energy, interfacial adhesion, coating durability, fatigue testing

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Frost formation and anti-icing performance of a hydrophobic coating on aluminum

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Metadata

Record

About these checks