The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Cellulose, xylan and lignin interactions during pyrolysis of lignocellulosic biomass
Open accessAbstract
The three primary lignocellulosic biomass components (cellulose, xylan and lignin), synthetic biomass samples (prepared by mixing the three primary components) and lignocellulosic biomass (oak, spruce and pine) were pyrolysed in a thermogravimetric analyser and a wire mesh reactor. Different reactivities were observed between the three biomass components. Cellulose mainly produced condensables and was less dependent on heating rate, while xylan and lignin contributed most char yields and were significantly affected by heating rate. While xylan and lignin pyrolysed over a large temperature range and showed the behaviour characteristic of solid fuels, cellulose decomposition is sharp in a narrow temperature range, a behaviour typical of linear polymers. Comparison of the pyrolysis behaviour of individual components with that of their synthetic mixtures showed that interactions between cellulose and the other two components take place, but no interaction was found between xylan and lignin. No obvious interaction occurred for synthetic mixtures and lignocellulosic biomass at 325 °C, before the beginning of cellulose pyrolysis, in slow and high heating rate. At higher pyrolysis temperatures, more char was obtained for synthetic mixtures containing cellulose compared to the estimated value based on the individual components and their proportions in the mixture. For lignocellulosic biomass, less char and more tar were obtained than predicted from the components, which may be associated with the morphology of samples. The porous structure of lignocellulosic biomass provided a release route for pyrolysis vapours.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Determination of Structural Carbohydrates and Lignin in Biomass
Sluiter, A. D., Hames, B. R., Ruiz, R. O., Scarlata, C. J., Sluiter, J. B., Templeton, D. W., & Crocker, D. P. (2012) · Cited by 5,261
Collard, F.-X., & Blin, J. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.06.013 · Cited by 1,905
Handbook of Wood Chemistry and Wood Composites
(2005) · CRC Press eBooks · doi:10.1201/9780203492437 · Cited by 1,480
Limayem, A., & Ricke, S. C. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.002 · Cited by 1,416
Yang, H., Yan, R., Chen, H., Zheng, C., Lee, D. H., & Liang, D. T. (2006) · Energy & Fuels · doi:10.1021/ef0580117 · Cited by 1,171
Handbook of Wood Chemistry and Wood Composites
(2012) · CRC Press eBooks · doi:10.1201/b12487 · Cited by 917
Literature review of physical and chemical pretreatment processes for lignocellulosic biomass
Harmsen, P. F. H., Huijgen, W. J. J., Bermúdez, L. A., & Bakker, R. (2010) · Data Archiving and Networked Services (DANS) · Cited by 743
Conversion of Lignocellulosic Biomass to Nanocellulose: Structure and Chemical Process
Lee, H. V., Hamid, S. B. A., & Zain, S. K. (2014) · The Scientific World Journal · doi:10.1155/2014/631013 · Cited by 700
Pyrolysis characteristics of biomass and biomass components
Raveendran, K. (1996) · Fuel · doi:10.1016/0016-2361(96)00030-0 · Cited by 693
Cited by
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
Wang, S., Dai, G., Yang, H., & Luo, Z. (2017) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2017.05.004 · Cited by 2,595
A comprehensive review on the pyrolysis of lignocellulosic biomass
Dhyani, V., & Bhaskar, T. (2018) · Renewable Energy · doi:10.1016/j.renene.2017.04.035 · Cited by 1,545
Emerging technologies for the pretreatment of lignocellulosic biomass
Hassan, S. S., Williams, G. A., & Jaiswal, A. K. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.04.099 · Cited by 835
Kumar, B., Bhardwaj, N., Agrawal, K., Chaturvedi, V., & Verma, P. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106244 · Cited by 743
A Review of Recent Advances in Biomass Pyrolysis
Wang, G., Dai, Y., Yang, H., Xiong, Q., Wang, K., Zhou, J., Li, Y., & Wang, S. (2020) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03107 · Cited by 597
Kumar, R., Strezov, V., Weldekidan, H., He, J., Singh, S., Kan, T., & Dastjerdi, B. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109763 · Cited by 542
Hoang, A. T., Ong, H. C., Fattah, I. M. R., Chong, C. T., Cheng, C. K., Sakthivel, R., & Ok, Y. S. (2021) · Fuel Processing Technology · doi:10.1016/j.fuproc.2021.106997 · Cited by 512
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Escalante, J., Chen, W.-H., Tabatabaei, M., Hoang, A. T., Kwon, E. E., Andrew Lin, K.-Y., & Saravanakumar, A. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112914 · Cited by 414
Ionic liquid based pretreatment of lignocellulosic biomass for enhanced bioconversion
Usmani, Z., Sharma, M., Gupta, P., Karpichev, Y., Gathergood, N., Bhat, R., & Gupta, V. K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123003 · Cited by 404
S, R., & P, B. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.11.041 · Cited by 346
Ge, S., Yek, P. N. Y., Cheng, Y. W., Xia, C., Wan Mahari, W. A., Liew, R. K., Peng, W., Yuan, T.-Q., Tabatabaei, M., Aghbashlo, M., et al. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110148 · Cited by 329
Yeo, J. Y., Chin, B. L. F., Tan, J. K., & Loh, Y. S. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2017.12.003 · Cited by 304
Leng, E., Guo, Y., Chen, J., Liu, S., E, J., & Xue, Y. (2022) · Fuel · doi:10.1016/j.fuel.2021.122102 · Cited by 286
Hoang, A. T., Nižetić, S., Ong, H. C., Mofijur, M., Ahmed, S. F., Ashok, B., Bui, V. T. V., & Chau, M. Q. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130878 · Cited by 278
Physico-mechanical and thermodynamic properties of mycelium-based biocomposites: a review
Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E. (2019) · Sustainability · doi:10.3390/su11010281 · Cited by 276
Díez, D., Urueña, A., Piñero, R., Barrio, A., & Tamminen, T. (2020) · Processes · doi:10.3390/pr8091048 · Cited by 275
Biomass pyrolysis technologies for value-added products: a state-of-the-art review
Amenaghawon, A. N., Anyalewechi, C. L., Okieimen, C. O., & Kusuma, H. S. (2021) · Environment, Development and Sustainability · doi:10.1007/s10668-021-01276-5 · Cited by 260
Catalytic pyrolysis of lignocellulosic biomass for bio-oil production: A review
Wang, Y., Akbarzadeh, A., Chong, L., Du, J., Tahir, N., & Awasthi, M. K. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134181 · Cited by 247
Yu, J., Sun, L., Berrueco, C., Fidalgo, B., Paterson, N., & Millan, M. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.01.018 · Cited by 155
Self-citationQiao, Y., Wang, B., Ji, Y., Xu, F., Zong, P., Zhang, J., & Tian, Y. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.102 · Cited by 149
Zhang, C., Hu, X., Guo, H., Wei, T., Dong, D., Hu, G., Hu, S., Xiang, J., Liu, Q., & Wang, Y. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.08.009 · Cited by 138
The pyrolysis of lignin: Pathway and interaction studies
Yu, J., Wang, D., & Sun, L. (2021) · Fuel · doi:10.1016/j.fuel.2020.120078 · Cited by 108
Self-citationChen, Y., Fang, Y., Yang, H., Xin, S., Zhang, X., Wang, X., & Chen, H. (2019) · Fuel · doi:10.1016/j.fuel.2019.03.070 · Cited by 103
Co-liquefaction of mixed biomass feedstocks for bio-oil production: A critical review
Li, Q., Yuan, X., Hu, X., Meers, E., Ong, H. C., Chen, W.-H., Duan, P., Zhang, S., Lee, K. B., & Ok, Y. S. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111814 · Cited by 73
Py-GC/MS analysis on product distribution of two-staged biomass pyrolysis
Cai, W., Liu, Q., Shen, D., & Wang, J. (2019) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.12.007 · Cited by 66
Chua, Y. W., Wu, H., & Yu, Y. (2021) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2020.08.014 · Cited by 51
Han, Z., Li, J., Gu, T., Yan, B., & Chen, G. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.113237 · Cited by 34
Kululo, W. W., Habtu, N. G., Abera, M. K., Sendekie, Z. B., Fanta, S. W., & Yemata, T. A. (2025) · Green Energy and Technology · doi:10.1007/978-3-031-81730-4_15 · Cited by 3
Metadata
- Authors
- Yu, J., Paterson, N., Blamey, J., & Millan, M.
- Venue
- Fuel
- Publisher
- Elsevier BV
- Published
- 2017-03
- Volume
- 191
- Pages
- 140-149
- ISSN
- 0016-2361 (ISSN-L)
- OpenAlex
- W2552265359
- Cited by
- 452
- References
- 36
- FWCI
- 13.53
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.