CoChat

Physico-Mechanical and Thermodynamic Properties of Mycelium-Based Biocomposites: A Review

Open access

The DOI matches its Crossref record; 79 of the 81 references it cites were found in a registry or an index.

Abstract

Reducing the use of non-renewable resources is a key strategy of a circular economy. Mycelium-based foams and sandwich composites are an emerging category of biocomposites relying on the valorization of lignocellulosic wastes and the natural growth of the living fungal organism. While growing, the fungus cements the substrate, which is partially replaced by the tenacious biomass of the fungus itself. The final product can be shaped to produce insulating panels, packaging materials, bricks or new-design objects. Only a few pioneer companies in the world retain a significant know-how, as well as the ability to provide the material characterization. Moreover, several technical details are not revealed due to industrial secrecy. According to the available literature, mycelium-based biocomposites show low density and good insulation properties, both related to acoustic and thermal aspects. Mechanical properties are apparently inferior in comparison to expanded polystyrene (EPS), which is the major synthetic competitor. Nevertheless, mycelium-based composites can display an enormous variability on the basis of: fungal species and strain; substrate composition and structure; and incubation conditions. The aim of the present review is to summarize technical aspects and properties of mycelium-based biocomposites focusing on both actual applications and future perspectives.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/su11010281

Cites

79 of 79 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Cultivation bags with mycelial growth in progress ( A ) and final biocomposite ( B , C ). Figure 1. Cultivation bags with mycelial growth in progress ( A ) and final biocomposite ( B , C ). Pictures by C. Girometta and R.M. Baiguera.
Figure 1 Cultivation bags with mycelial growth in progress ( A ) and final biocomposite ( B , C ). Figure 1. Cultivation bags with mycelial growth in progress ( A ) and final biocomposite ( B , C ). Pictures by C. Girometta and R.M. Baiguera.CC-BY · From the PDF
Figure 2 Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 μ m ( H ), 50 μ m ( C , G , K ), 20 μ m ( L ) and 10 μ m ( D ). Reprinted with permission of Apples et al. (2019) [18]. Figure 2. Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 µ m( H ), 50 µ m( C , G , K ), 20 µ m( L ) and 10 µ m( D ). Reprinted with permission of Apples et al. (2019) [18].
Figure 2 Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 μ m ( H ), 50 μ m ( C , G , K ), 20 μ m ( L ) and 10 μ m ( D ). Reprinted with permission of Apples et al. (2019) [18]. Figure 2. Stereomicroscopy and cryo-SEM images of different biocomposites. TRN ( A -D ) = T. multicolor on straw without heat pressing; TRH ( E -H ) = T. multicolor on straw with heat pressing; PCH ( I -L ) = P. ostreatus on cotton with heat pressing. Arrows indicate aerial hyphae (a), mycelium (b), substrate (c), fused hyphae (d) and air-voids (e). Scale bars represent 1 mm ( A , B , E , F , I , J ) 100 µ m( H ), 50 µ m( C , G , K ), 20 µ m( L ) and 10 µ m( D ). Reprinted with permission of Apples et al. (2019) [18].CC-BY · From the PDF
Figure 3 Diagram showing the production and life cycle of mycelium-based materials. The picture also shows how these materials comply with circular thinking. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].
Figure 3 Diagram showing the production and life cycle of mycelium-based materials. The picture also shows how these materials comply with circular thinking. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].CC-BY · From the PDF
Figure 4 Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36] . Figure 4. Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36]. Sustainability 2019 , 11 , x FOR PEER REVIEW 6 of 23
Figure 4 Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36] . Figure 4. Typical structure of mycelium-based foam. Reprinted with permission of Karana et al. (2018) [36]. Sustainability 2019 , 11 , x FOR PEER REVIEW 6 of 23CC-BY · From the PDF
Figure 5 Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22]. Figure 5. Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22].
Figure 5 Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22]. Figure 5. Typical structure scheme of a mycelium-based sandwich composite. Modified from Jiang et al. (2017) [22].CC-BY · From the PDF
Figure 6 Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18]. Figure 6. Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18].
Figure 6 Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18]. Figure 6. Panels from growth of Trametes multicolor and Pleurotus ostreatus on different substrates. TBN = T. multicolor on sawdust; TRH = T. multicolor on straw with heat pressing; TRN = T. multicolor on straw without heat pressing; PCH = P. ostreatus on cotton with heat pressing; PCC = P. ostreatus on cotton with cold pressing; PCN = P. ostreatus without pressing; PRH = P. ostreatus on straw with heat pressing; PRC = P. ostreatus on straw with cold pressing; PRN = P. ostreatus on straw without pressing (PRN). Reprinted with permission of Apples et al. (2019) [18].CC-BY · From the PDF
Figure 7 Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31]. Figure 7. Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].
Figure 7 Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31]. Figure 7. Comprehensive look ( A ) and detail ( B ) of Mogu 3D wave panels for acoustic insulation. Reprinted with permission of ©MOGU, https://www.mogu.bio/ [31].CC-BY · From the PDF
Figure 8 Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. Figure 8. Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. (2019) [18].
Figure 8 Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. Figure 8. Higher resistance of the fungal skin in comparison to the substrate. The top side remains intact under flexural stress whereas the bottom side is broken. ( A ) T. multicolor on straw without heat pressing; ( B ) P. ostreatus on cotton with heat pressing. Reprinted with permission of Apples et al. (2019) [18].CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 79 references

Research works printed but not linked: 11

  1. Sitte, P., Weiler, E., Kadereit, H.J., Bresinsky, A., and Körner, C. (2002). Strasburger, Lehrbuch der Botanik für Hochschulen, Springer. [35th ed.].
  2. Callister, W.M., and Rethwisch, D.G. (2007). Materials Science and Engineering, John Wiley & Sons. [8th ed.].
  3. Schwarze, F.W.M.R., Engels, J., and Mattheck, C. (2013). Fungal Strategies of Wood Decay in Trees, Springer-Verlag.
  4. Drzal, 2001, Bio-composite materials as alternatives to petroleum-based composites for automotive applications, Magnesium, 40, 1
  5. Travaglini, S., Noble, J., Ross, P.G., and Dharan, C.K.H. (2013, January 9–11). Mycology matrix composites. Proceedings of the American Society for Composites, 28th Technical Conference, State College, PA, USA.
  6. Santhosh, 2018, Mycelium composites: An emerging green building material, Int. Res. J. Eng. Technol., 5, 3066
  7. Mouritz, A.P., and Gibson, A.G. (2007). Fire Properties of Polymer Composite Materials, Springer Science & Business Media.
  8. Solomon, 2017, Inspecting the behavior of insulated concrete form (icf) blocks with polypropylene sheet, Indian J. Sci. Res., 14, 114
  9. Stamets, P. (2011). Growing Gourmet and Medicinal Mushrooms, Ten Speed Press. [3rd ed.].
  10. The Ellen Mc Arthur Foundation (2018, November 27). Towards the Circular Economy. Economic and Business Rationale for an Accelerated Transition. Available online: https://www.ellenmacarthurfoundation.org/assets/downloads/publications/Ellen-MacArthur-Foundation-Towards-the-Circular-Economy-vol.1.pdf.
  11. Stamets, P., and Chilton, J.S. (1983). The Mushroom Cultivator, Agarikon Press, Olympia. [1st ed.].

Cited by

See all 289

Metadata

Authors
Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E.
Affiliations
  • University of Pavia (IT)
  • MOGU S.r.l., Via S. Francesco, 61, 21020 Inarzo, VA, Italy
Corresponding author
Picco, Anna Maria
Venue
Sustainability
Publisher
MDPI AG
Published
2019-01-08
Volume
11
Issue
1
Pages
281
ISSN
2071-1050 (ISSN-L)
OpenAlex
W2897497425
Cited by
276
References
81
Citations by year
2026: 39 · 2025: 40 · 2024: 47 · 2023: 53 · 2022: 44 · 2021: 31 · 2020: 14 · 2019: 8
FWCI
10.36
Type
journal article
Language
en
Open access
Locations
  • Sustainability (publishedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer Foaming and Composites
  • Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
Keywords
sandwich composites, lignocellulosic waste valorization, fungal growth, thermal insulation, sound insulation, mechanical properties, physico-mechanical properties, thermodynamic properties, circular economy, packaging materials, insulating panels

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Physico-Mechanical and Thermodynamic Properties of Mycelium-Based Biocomposites: A Review. https://app.cochat.ai/papers/10.3390/su11010281
The paper
Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E. (2019). Physico-Mechanical and Thermodynamic Properties of Mycelium-Based Biocomposites: A Review. Sustainability. https://doi.org/10.3390/su11010281

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.