3D printed milk protein food simulant: Improving the printing performance of milk protein concentration by incorporating whey protein isolate
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This paper aimed to establish a milk protein based 3D printing food simulant and investigated the effect of whey protein isolate (WPI) concentration on the printing performance of milk protein concentrate (MPC). WPI and MPC powders at different ratios were prepared in paste (35 wt%, total dry matter content). The rheological properties and water distribution of protein matrix prepared with different MPC/WPI ratios were characterized with a rheometer and low field nuclear magnetic resonance (LF-NMR), respectively. Moreover, the variations in the microstructure of printed objects were observed with a scanning electron microscope (SEM). The printed objects showed different appearance and physical properties; the printing fidelity was also evaluated by measuring the geometric accuracy of printed objects. The rheological and texture data showed that the presence of WPI could reduce the apparent viscosity and soften the MPC paste, benefiting the printing process. The results showed that the milk powder paste mixture prepared with MPC/WPI at a ratio of 5/2 was the most desirable material for extrusion-based 3D printing, which could be successfully printed and matched the designed 3D model best. Industrial relevance: 3D printing in food sector has been an attractive and emerging technology owing to its potential advantages, such as customized food designs, personalized and digitalized nutrition, simplifying supply chain and so on. This paper established a high protein food simulant for 3D printing, optimized its printing performance with whey protein isolate, and studied the physicochemical property of prepared protein pastes. The overall results indicated that milk protein powders could be the promising materials for the application in food 3D printing. In flowing studies or practical production, the glycerol could be replaced by ingredients such as syrup, honey etc. This study may give more insights into 3D printing applied in food sector and facilitate the further developments of 3D food printing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing: Printing precision and application in food sector
Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858
Self-citationAn Overview of 3D Printing Technologies for Food Fabrication
Sun, J., Zhou, W., Huang, D., Fuh, J. Y. H., & Hong, G. S. (2015) · Food and Bioprocess Technology · doi:10.1007/s11947-015-1528-6 · Cited by 549
Yang, F., Zhang, M., Bhandari, B., & Liu, Y. (2018) · LWT · doi:10.1016/j.lwt.2017.08.054 · Cited by 479
Self-citationExtrusion-based food printing for digitalized food design and nutrition control
Sun, J., Zhou, W., Yan, L., Huang, D., & Lin, L.-Y. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.02.028 · Cited by 410
Derossi, A., Caporizzi, R., Azzollini, D., & Severini, C. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.05.015 · Cited by 399
Cited by
Baiano, A. (2022) · Food Reviews International · doi:10.1080/87559129.2020.1762091 · Cited by 245
3D food printing: a categorised review of inks and their development
Voon, S. L., An, J., Wong, G., Zhang, Y., & Chua, C. K. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1603508 · Cited by 175
3D printing to innovate biopolymer materials for demanding applications: A review
Li, N., Qiao, D., Zhao, S., Lin, Q., Zhang, B., & Xie, F. (2021) · Materials Today Chemistry · doi:10.1016/j.mtchem.2021.100459 · Cited by 142
Abedini, A., Sohrabvandi, S., Sadighara, P., Hosseini, H., Farhoodi, M., Assadpour, E., Alizadeh Sani, M., Zhang, F., Seyyedi-Mansour, S., & Jafari, S. M. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103181 · Cited by 71
Three-Dimensional Printing Applications in Food Industry
Leontiou, A., Georgopoulos, S., Karabagias, V., Kehayias, G., Karakassides, A., Salmas, C., & Giannakas, A. (2023) · Nanomanufacturing · doi:10.3390/nanomanufacturing3010006 · Cited by 66
“prepared whey protein isolate (WPI) and milk protein concentrate (MPC) powders at different ratios in paste using an extrusion-based 3D printing system [42].”
Method
Metadata
- Authors
- Liu, Y., Liu, D., Wei, G., Ma, Y., Bhandari, B., & Zhou, P.
- Venue
- Innovative Food Science & Emerging Technologies
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 49
- Pages
- 116-126
- ISSN
- 1466-8564 (ISSN-L)
- OpenAlex
- W2886364939
- Cited by
- 180
- References
- 5
- FWCI
- 7.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.