The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: Mean stress and defect sensitivity
Open accessAbstract
Abstract Selective laser melting (SLM) is a net-shape AM technology to produce metal parts also for load-carrying applications. The present work is aimed at investigating the fatigue performance of the biomedical titanium Grade 23 (aka Ti-6Al-4V ELI) AMed via SLM. Low and high cycle fatigue tests are carried out on samples that received a low temperature stress-relief treatment. In addition, the effect of selected post processing treatments on the high cycle fatigue response is assessed. Material characterization is complemented with residual stress and microhardness measurements, computed tomography scans, metallographic and fractographic inspections. These experimental analyses served to elaborate an interpretative model accounting for the modifications produced by the post-processing treatments. The results denote the important role exerted by mean and residual stresses as well as defects on the fatigue performance. The relatively low fatigue strength of SLM manufactured parts indicates that further developments in this fabrication route are still necessary to make their mechanical properties competitive with those of traditionally processed components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
An overview on the use of titanium in the aerospace industry
Boyer, R. R. (1996) · Materials Science and Engineering: A · doi:10.1016/0921-5093(96)10233-1 · Cited by 2,442
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys
Lütjering, G. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00778-8 · Cited by 1,461
Metal fatigue : effects of small defects and nonmetallic inclusions
村上, 敬. (2002) · Elsevier eBooks · Cited by 1,457
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., & Qian, M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.028 · Cited by 1,245
Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions
MURAKAMI, Y. (2002) · Cited by 1,150
Levy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Vandenbroucke, B., & Kruth, J. (2007) · Rapid Prototyping Journal · doi:10.1108/13552540710776142 · Cited by 981
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Kasperovich, G., & Hausmann, J. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.025 · Cited by 735
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Beretta, S., & Romano, S. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.020 · Cited by 635
Li, P., Warner, D. H., Fatemi, A., & Phan, N. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2015.12.003 · Cited by 546
Effects of Defects in Laser Additive Manufactured Ti-6Al-4V on Fatigue Properties
Wycisk, E., Solbach, A., Siddique, S., Herzog, D., Walther, F., & Emmelmann, C. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.120 · Cited by 509
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
Günther, J., Krewerth, D., Lippmann, T., Leuders, S., Tröster, T., Weidner, A., Biermann, H., & Niendorf, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.018 · Cited by 475
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
Edwards, P., O'Conner, A., & Ramulu, M. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025773 · Cited by 450
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
Campoli, G., Borleffs, M. S., Amin Yavari, S., Wauthle, R., Weinans, H., & Zadpoor, A. A. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.01.071 · Cited by 404
Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Greitemeier, D., Palm, F., Syassen, F., & Melz, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.001 · Cited by 385
On the fatigue properties of metals manufactured by selective laser melting – The role of ductility
Leuders, S., Lieneke, T., Lammers, S., Tröster, T., & Niendorf, T. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.157 · Cited by 309
Benedetti, M., Torresani, E., Leoni, M., Fontanari, V., Bandini, M., Pederzolli, C., & Potrich, C. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.03.024 · Cited by 248
Self-citationSTATISTICAL ANALYSIS OF DEFECTS FOR FATIGUE STRENGTH PREDICTION AND QUALITY CONTROL OF MATERIALS
Beretta, S., & MURAKAMI, Y. (1998) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1046/j.1460-2695.1998.00104.x · Cited by 216
Gorny, B., Niendorf, T., Lackmann, J., Thoene, M., Troester, T., & Maier, H. J. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.07.026 · Cited by 213
Liu, Q. C., Elambasseril, J., Sun, S. J., Leary, M., Brandt, M., & Sharp, P. K. (2014) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.891-892.1519 · Cited by 201
Porosity testing methods for the quality assessment of selective laser melted parts
Wits, W. W., Carmignato, S., Zanini, F., & Vaneker, T. H. J. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.04.054 · Cited by 190
Self-citationAnalytical modelling of residual stress in additive manufacturing
Fergani, O., Berto, F., Welo, T., & Liang, S. Y. (2017) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12560 · Cited by 169
The Additive Manufacturing (AM) of Titanium Alloys
Froes, F. H., & Dutta, B. (2014) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.1019.19 · Cited by 158
Anisotropic high cycle fatigue behavior of Ti–6Al–4V obtained by powder bed laser fusion
Nicoletto, G. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.032 · Cited by 146
Electropolishing of CP Titanium and Its Alloys in an Alcoholic Solution-based Electrolyte
Tajima, K., HIRONAKA, M., Chen, K.-K., Nagamatsu, Y., Kakigawa, H., & Kozono, Y. (2008) · Dental Materials Journal · doi:10.4012/dmj.27.258 · Cited by 87
Experimental analysis of selective laser melting process for Ti-6Al-4V turbine blade manufacturing
Caiazzo, F., Cardaropoli, F., Alfieri, V., et al. (2013) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2010577 · Cited by 35
Cited by
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Self-citationdu Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
du Plessis, A., Yadroitsev, I., Yadroitsava, I., & Le Roux, S. G. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0060 · Cited by 550
Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
Maleki, E., Bagherifard, S., Bandini, M., & Guagliano, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101619 · Cited by 528
Self-citation
Metadata
- Authors
- Benedetti, M., Fontanari, V., Bandini, M., Zanini, F., & Carmignato, S.
- Venue
- International Journal of Fatigue
- Publisher
- Elsevier BV
- Published
- 2018-02
- Volume
- 107
- Pages
- 96-109
- ISSN
- 0142-1123 (ISSN-L)
- OpenAlex
- W2767755556
- Cited by
- 297
- References
- 34
- FWCI
- 13.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.