The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress
Open accessAbstract
Abstract Uniaxial compression stress–strain tests were carried out on three commercial amorphous polymers: polycarbonate (PC), polymethylmethacrylate (PMMA), and polyamideimide (PAI). The experiments were conducted under a wide range of temperatures (−40 °C to 180 °C) and strain rates (0.0001 s −1 up to 5000 s −1 ). A modified split-Hopkinson pressure bar was used for high strain rate tests. Temperature and strain rate greatly influence the mechanical response of the three polymers. In particular, the yield stress is found to increase with decreasing temperature and with increasing strain rate. The experimental data for the compressive yield stress were modeled for a wide range of strain rates and temperatures according to a new formulation of the cooperative model based on a strain rate/temperature superposition principle. The modeling results of the cooperative model provide evidence on the secondary transition by linking the yield behavior to the energy associated to the β mechanical loss peak. The effect of hydrostatic pressure is also addressed from a modeling perspective.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Viscoelastic Properties of Polymers
Ferry, J. D., & Myers, H. S. (1961) · Journal of The Electrochemical Society · doi:10.1149/1.2428174 · Cited by 13,487
Viscoelastic Properties of Polymers
Jones, W. M. (1981) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(81)80036-5 · Cited by 11,092
Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates
Eyring, H. (1936) · The Journal of Chemical Physics · doi:10.1063/1.1749836 · Cited by 3,218
Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model
Boyce, M. C., Parks, D. M., & Argon, A. S. (1988) · Mechanics of Materials · doi:10.1016/0167-6636(88)90003-8 · Cited by 1,110
Mechanical Testing and Evaluation
(2000) · ASM International eBooks · doi:10.31399/asm.hb.v08.9781627081764 · Cited by 841
A theory for the low-temperature plastic deformation of glassy polymers
Argon, A. S. (1973) · Philosophical Magazine · doi:10.1080/14786437308220987 · Cited by 801
The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics
Haward, R. N., & Thackray, G. (1968) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1968.0029 · Cited by 646
Arruda, E. M., Boyce, M. C., & Jayachandran, R. (1995) · Mechanics of Materials · doi:10.1016/0167-6636(94)00034-e · Cited by 630
Theory for the Plasticity of Glassy Polymers
Robertson, R. E. (1966) · The Journal of Chemical Physics · doi:10.1063/1.1726558 · Cited by 365
Tensile yield‐stress behavior of glassy polymers
Bauwens‐Crowet, C., Bauwens, J. C., & Homès, G. (1969) · Journal of Polymer Science Part A-2: Polymer Physics · doi:10.1002/pol.1969.160070411 · Cited by 323
Cited by
High Strain Rate Mechanics of Polymers: A Review
Siviour, C. R., & Jordan, J. L. (2016) · Journal of Dynamic Behavior of Materials · doi:10.1007/s40870-016-0052-8 · Cited by 397
Adhesion to tooth structure: A critical review of “macro” test methods
Braga, R. R., Meira, J. B. C., Boaro, L. C. C., & Xavier, T. A. (2010) · Dental Materials · doi:10.1016/j.dental.2009.11.150 · Cited by 390
Anand, L., Ames, N. M., Srivastava, V., & Chester, S. A. (2009) · International Journal of Plasticity · doi:10.1016/j.ijplas.2008.11.004 · Cited by 337
Srivastava, V., Chester, S. A., Ames, N. M., & Anand, L. (2010) · International Journal of Plasticity · doi:10.1016/j.ijplas.2010.01.004 · Cited by 269
Ames, N. M., Srivastava, V., Chester, S. A., & Anand, L. (2009) · International Journal of Plasticity · doi:10.1016/j.ijplas.2008.11.005 · Cited by 257
Richeton, J., Ahzi, S., Vecchio, K. S., Jiang, F. C., & Makradi, A. (2007) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2007.05.018 · Cited by 255
Self-citationYeh, I.-C., Andzelm, J. W., & Rutledge, G. C. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00697 · Cited by 146
Furmanski, J., Cady, C. M., & Brown, E. N. (2013) · Polymer · doi:10.1016/j.polymer.2012.11.010 · Cited by 73
Metadata
- Authors
- Richeton, J., Ahzi, S., Vecchio, K. S., Jiang, F. C., & Adharapurapu, R. R.
- Venue
- International Journal of Solids and Structures
- Publisher
- Elsevier BV
- Published
- 2006-04
- Volume
- 43
- Issue
- 7-8
- Pages
- 2318-2335
- ISSN
- 0020-7683 (ISSN-L)
- OpenAlex
- W2038095707
- Cited by
- 570
- References
- 34
- FWCI
- 4.23
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.