The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress
Open accessAbstract
Abstract Uniaxial compression stress–strain tests were carried out on three commercial amorphous polymers: polycarbonate (PC), polymethylmethacrylate (PMMA), and polyamideimide (PAI). The experiments were conducted under a wide range of temperatures (−40 °C to 180 °C) and strain rates (0.0001 s −1 up to 5000 s −1 ). A modified split-Hopkinson pressure bar was used for high strain rate tests. Temperature and strain rate greatly influence the mechanical response of the three polymers. In particular, the yield stress is found to increase with decreasing temperature and with increasing strain rate. The experimental data for the compressive yield stress were modeled for a wide range of strain rates and temperatures according to a new formulation of the cooperative model based on a strain rate/temperature superposition principle. The modeling results of the cooperative model provide evidence on the secondary transition by linking the yield behavior to the energy associated to the β mechanical loss peak. The effect of hydrostatic pressure is also addressed from a modeling perspective.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Viscoelastic Properties of Polymers
Ferry, J. D., & Myers, H. S. (1961) · Journal of The Electrochemical Society · doi:10.1149/1.2428174 · Cited by 13,487
Viscoelastic Properties of Polymers
Jones, W. M. (1981) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/0377-0257(81)80036-5 · Cited by 11,092
Viscosity, Plasticity, and Diffusion as Examples of Absolute Reaction Rates
Eyring, H. (1936) · The Journal of Chemical Physics · doi:10.1063/1.1749836 · Cited by 3,218
Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model
Boyce, M. C., Parks, D. M., & Argon, A. S. (1988) · Mechanics of Materials · doi:10.1016/0167-6636(88)90003-8 · Cited by 1,110
Mechanical Testing and Evaluation
(2000) · ASM International eBooks · doi:10.31399/asm.hb.v08.9781627081764 · Cited by 841
A theory for the low-temperature plastic deformation of glassy polymers
Argon, A. S. (1973) · Philosophical Magazine · doi:10.1080/14786437308220987 · Cited by 801
The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics
Haward, R. N., & Thackray, G. (1968) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1968.0029 · Cited by 646
Arruda, E. M., Boyce, M. C., & Jayachandran, R. (1995) · Mechanics of Materials · doi:10.1016/0167-6636(94)00034-e · Cited by 630
Theory for the Plasticity of Glassy Polymers
Robertson, R. E. (1966) · The Journal of Chemical Physics · doi:10.1063/1.1726558 · Cited by 365
Tensile yield‐stress behavior of glassy polymers
Bauwens‐Crowet, C., Bauwens, J. C., & Homès, G. (1969) · Journal of Polymer Science Part A-2: Polymer Physics · doi:10.1002/pol.1969.160070411 · Cited by 323
Richeton, J., Ahzi, S., Daridon, L., & Rémond, Y. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.079 · Cited by 272
Self-citationBoyce, M. C., & Arruda, E. M. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760302005 · Cited by 253
Bauwens-Crowet, C. (1973) · Journal of Materials Science · doi:10.1007/bf00756628 · Cited by 235
The temperature dependence of yield of polycarbonate in uniaxial compression and tensile tests
Bauwens-Crowet, C., Bauwens, J. C., & Hom�s, G. (1972) · Journal of Materials Science · doi:10.1007/bf00554178 · Cited by 230
Spitzig, W. A., & Richmond, O. (1979) · Polymer Engineering & Science · doi:10.1002/pen.760191602 · Cited by 220
Yield criteria for amorphous glassy polymers
QUINSON, R., PEREZ, J., RINK, M., & PAVAN, A. (1997) · Journal of Materials Science · doi:10.1023/a:1018525127466 · Cited by 207
Split-Hopkinson Pressure Bar Testing of Soft Materials
(2000) · ASM International eBooks · doi:10.31399/asm.hb.v08.a0003298 · Cited by 198
The effect of hydrostatic pressure on the shear yield behaviour of polymers
Rabinowitz, S., Ward, I. M., & Parry, J. S. C. (1970) · Journal of Materials Science · doi:10.1007/pl00020253 · Cited by 187
Bowden, P. B., & Raha, S. (1974) · The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786437408213560 · Cited by 173
The role of recovery forces in the deformation of linear polyethylene
Fotheringham, D., & Cherry, B. W. (1978) · Journal of Materials Science · doi:10.1007/bf00544690 · Cited by 139
A study of the rapid deformation behaviour of a range of polymers
Walley, S. M., Field, J. E., Pope, P. H., & Safford, N. A. (1989) · Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences · doi:10.1098/rsta.1989.0020 · Cited by 137
Chen, L. P., Yee, A. F., & Moskala, E. J. (1999) · Macromolecules · doi:10.1021/ma981363a · Cited by 132
Bauwens, J. C., Bauwens‐Crowet, C., & Homès, G. (1969) · Journal of Polymer Science Part A-2: Polymer Physics · doi:10.1002/pol.1969.160071010 · Cited by 105
The effect of hydrostatic pressure on the shear yield behaviour of polymers
Rabinowitz, S., Ward, I. M., & Parry, J. S. C. (1970) · Journal of Materials Science · doi:10.1007/bf02427181 · Cited by 101
Xiao, C., Jho, J. Y., & Yee, A. F. (1994) · Macromolecules · doi:10.1021/ma00088a017 · Cited by 79
Molecular analysis of yielding in pure and antiplasticized epoxy-amine thermosets
Rana, D. K., Sauvant, V., & Halary, J. L. (2002) · Journal of Materials Science · doi:10.1023/a:1021012721619 · Cited by 75
Yield stress behaviour of poly(ethyl methacrylate) in the glass transition region
Roetling, J. A. (1965) · Polymer · doi:10.1016/0032-3861(65)90056-x · Cited by 75
Fotheringham, D., Cherry, B. W., & Bauwens‐Crowet, C. (1976) · Journal of Materials Science · doi:10.1007/bf00545162 · Cited by 69
The compression yield behaviour of polycarbonate over a wide range of strain rates and temperatures
Rietsch, F., & Bouette, B. (1990) · European Polymer Journal · doi:10.1016/0014-3057(90)90005-o · Cited by 66
Cady, C., Blumenthal, W. R., Gray, G. T., et al. (2003) · Journal de Physique IV (Proceedings) · doi:10.1051/jp4:20020665 · Cited by 43
Temperature and strain rate dependence of the tensile yield stress of PVC
Povolo, F., Schwartz, G. A., & Hermida, É. B. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960705)61:1<109::aid-app12>3.0.co;2-2 · Cited by 37
Phenomenological description of strain rate and temperature‐dependent yield stress of PMMA
Povolo, F., & Hermida, É. B. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070580106 · Cited by 34
Modeling of strain rates and temperature effects on the yield behavior of amorphous polymers
Richeton, J., Ahzi, S., Daridon, L., et al. (2003) · Journal de Physique IV (Proceedings) · doi:10.1051/jp4:20020667 · Cited by 27
Self-citationMolecular analysis of the plastic deformation of amorphous semi-aromatic polyamides
Brulé, B., Halary, J. L., & MONNERIE, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00371-8 · Cited by 26
Cited by
High Strain Rate Mechanics of Polymers: A Review
Siviour, C. R., & Jordan, J. L. (2016) · Journal of Dynamic Behavior of Materials · doi:10.1007/s40870-016-0052-8 · Cited by 397
Adhesion to tooth structure: A critical review of “macro” test methods
Braga, R. R., Meira, J. B. C., Boaro, L. C. C., & Xavier, T. A. (2010) · Dental Materials · doi:10.1016/j.dental.2009.11.150 · Cited by 390
Anand, L., Ames, N. M., Srivastava, V., & Chester, S. A. (2009) · International Journal of Plasticity · doi:10.1016/j.ijplas.2008.11.004 · Cited by 337
Srivastava, V., Chester, S. A., Ames, N. M., & Anand, L. (2010) · International Journal of Plasticity · doi:10.1016/j.ijplas.2010.01.004 · Cited by 269
Ames, N. M., Srivastava, V., Chester, S. A., & Anand, L. (2009) · International Journal of Plasticity · doi:10.1016/j.ijplas.2008.11.005 · Cited by 257
Metadata
- Authors
- Richeton, J., Ahzi, S., Vecchio, K. S., Jiang, F. C., & Adharapurapu, R. R.
- Venue
- International Journal of Solids and Structures
- Publisher
- Elsevier BV
- Published
- 2006-04
- Volume
- 43
- Issue
- 7-8
- Pages
- 2318-2335
- ISSN
- 0020-7683 (ISSN-L)
- OpenAlex
- W2038095707
- Cited by
- 570
- References
- 34
- FWCI
- 4.23
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.