The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Pyrolysis of plastic waste: Opportunities and challenges
Abstract
Abstract With current low recycling rates and exponentially increasing production of plastics there is an increase in plastic material wastage, and thus new technologies are needed for waste refining. Presently in Europe, only about 10% of plastic waste is recycled, most of which is achieved through mechanical recycling. Chemical recycling methods like pyrolysis could significantly increase these recycling rates, as it can utilize mixtures of waste plastics unlike mechanical recycling. It can also be used to treat waste of many novel materials, such as composites, especially in the emerging phase when the volumes of the new materials in markets are low making separate collection of waste not a cost-efficient option. Pyrolysis offers an environmentally sound alternative to incineration and inefficient landfilling. Currently, main challenges for pyrolysis of plastic waste are unavailability and inconsistent quality of feedstock, inefficient and hence costly sorting, non-existent markets citing lack for standardized products, and unclear regulations around plastic waste management. Possible solutions could include tight cooperation between feedstock providers and converters for securing steady quantity and quality of feedstock. Advanced pre-treatment would provide the basis for cost-effective recycling. The classification of pyrolysis liquid as a product instead of waste is needed, and the REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) registration should be carried out to standardise the liquid oil as a product. In addition, sustainability impacts need to be clearly positive.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
The ecoinvent database version 3 (part I): overview and methodology
Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., & Weidema, B. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1087-8 · Cited by 5,564
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Chemical recycling of waste plastics for new materials production
Rahimi, A., & García, J. M. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0046 · Cited by 2,121
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Thermal degradation of PVC: A review
Yu, J., Sun, L., Ma, C., Qiao, Y., & Yao, H. (2016) · Waste Management · doi:10.1016/j.wasman.2015.11.041 · Cited by 1,049
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Panda, A. K., Singh, R. K., & Mishra, D. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.005 · Cited by 956
Lopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Thermal Degradation of Organic Polymers
Madorsky, S. L. (1964) · Medical Entomology and Zoology · Cited by 869
Recycling of Polymer-Based Multilayer Packaging: A Review
Kaiser, K., Schmid, M., & Schlummer, M. (2017) · Recycling · doi:10.3390/recycling3010001 · Cited by 549
(2006) · Wiley eBooks · doi:10.1002/0470021543 · Cited by 482
Serrano, D. P., Aguado, J., & Escola, J. M. (2012) · ACS Catalysis · doi:10.1021/cs3003403 · Cited by 457
Recycling potential of post-consumer plastic packaging waste in Finland
Dahlbo, H., Poliakova, V., Mylläri, V., Sahimaa, O., & Anderson, R. (2018) · Waste Management · doi:10.1016/j.wasman.2017.10.033 · Cited by 364
Catalytic pyrolysis of polyethylene
Bagri, R., & Williams, P. T. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00139-5 · Cited by 362
Feedstock recycling of polymers by pyrolysis in a fluidised bed
Kaminsky, W., Predel, M., & Sadiki, A. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.05.002 · Cited by 354
Life cycle assessment of thermal Waste-to-Energy technologies: Review and recommendations
Astrup, T. F., Tonini, D., Turconi, R., & Boldrin, A. (2015) · Waste Management · doi:10.1016/j.wasman.2014.06.011 · Cited by 350
Perugini, F., Mastellone, M. L., & Arena, U. (2005) · Environmental Progress · doi:10.1002/ep.10078 · Cited by 347
A study of the products of PVC thermal degradation
McNeill, I. C., Memetea, L., & Cole, W. J. (1995) · Polymer Degradation and Stability · doi:10.1016/0141-3910(95)00064-s · Cited by 337
The vacuum pyrolysis of used tires
Roy, C., Chaala, A., & Darmstadt, H. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00017-0 · Cited by 328
Fuels from Waste Plastics by Thermal and Catalytic Processes: A Review
Aguado, J., Serrano, D. P., & Escola, J. M. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800393w · Cited by 311
Pyrolysis of plastic waste for production of heavy fuel substitute: A techno-economic assessment
Fivga, A., & Dimitriou, I. (2018) · Energy · doi:10.1016/j.energy.2018.02.094 · Cited by 305
Fast pyrolysis of plastic wastes
Scott, D. S., Czernik, S. R., Piskorz, J., & Radlein, D. S. A. G. (1990) · Energy & Fuels · doi:10.1021/ef00022a013 · Cited by 301
State-of-the-art of fast pyrolysis in IEA bioenergy member countries
Meier, D., van de Beld, B., Bridgwater, A. V., Elliott, D. C., Oasmaa, A., & Preto, F. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.11.061 · Cited by 295
Self-citationButler, E., Devlin, G., & McDonnell, K. (2011) · Waste and Biomass Valorization · doi:10.1007/s12649-011-9067-5 · Cited by 270
Microwave-Induced Pyrolysis of Plastic Wastes
Ludlow-Palafox, C., & Chase, H. A. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010202j · Cited by 261
Kemmlein, S., Herzke, D., & Law, R. J. (2009) · Journal of Chromatography A · doi:10.1016/j.chroma.2008.05.085 · Cited by 233
Pyrolysis of mixed plastics into aromatics
Kaminsky, W., & Kim, J.-S. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00012-1 · Cited by 219
Pyrolysis of polyolefins for increasing the yield of monomers’ recovery
Donaj, P. J., Kaminsky, W., Buzeto, F., & Yang, W. (2012) · Waste Management · doi:10.1016/j.wasman.2011.10.009 · Cited by 202
(2007) · Choice Reviews Online · doi:10.5860/choice.44-6255 · Cited by 174
Feedstock recycling and pyrolysis of waste plastics
(2006) · Focus on Catalysts · doi:10.1016/s1351-4180(06)71853-0 · Cited by 172
Predel, M., & Kaminsky, W. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00131-2 · Cited by 161
Monomer recovery by pyrolysis of poly(methyl methacrylate) (PMMA)
Kaminsky, W., & Franck, J. (1991) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(91)80052-a · Cited by 149
Sajdak, M., & Muzyka, R. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.03.011 · Cited by 123
Serrano, D. P., Aguado, J., Escola, J. M., & Garagorri, E. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00153-4 · Cited by 121
Bio-oil Production from Biomass: Steps toward Demonstration
Solantausta, Y., Oasmaa, A., Sipilä, K., Lindfors, C., Lehto, J., Autio, J., Jokela, P., Alin, J., & Heiskanen, J. (2011) · Energy & Fuels · doi:10.1021/ef201109t · Cited by 106
Self-citationCracking catalysts used as fluidized bed material in the Hamburg pyrolysis process
Mertinkat, J., Kirsten, A., Predel, M., & Kaminsky, W. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00103-x · Cited by 104
Dechlorination of PVC wastes by hydrothermal treatment using alkaline additives
Zhao, P., Li, T., Yan, W., & Yuan, L. (2017) · Environmental Technology · doi:10.1080/09593330.2017.1317841 · Cited by 101
Hazardous substances in plastics
Stenmarck, Å., Belleza, E. L., Fråne, A., Busch, N., Larsen, Å., & Wahlström, M. (2017) · TemaNord · doi:10.6027/tn2017-505 · Cited by 60
Fluidized Bed Pyrolysis of Plastic Wastes
Arena, U., & Mastellone, M. L. (2006) · doi:10.1002/0470021543.ch16 · Cited by 56
Use of plastic waste as a fuel in the co-pyrolysis of biomass
Sajdak, M., Muzyka, R., Hrabak, J., & Słowik, K. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.01.008 · Cited by 55
Fukushima, M., Wu, B., Ibe, H., Wakai, K., Sugiyama, E., Abe, H., Kitagawa, K., Tsuruga, S., Shimura, K., & Ōno, E. (2010) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-010-0279-8 · Cited by 48
Grouping of mixed waste plastics according to chlorine content
Kikuchi, R., Kukačka, J., & Raschman, R. (2007) · Separation and Purification Technology · doi:10.1016/j.seppur.2007.10.001 · Cited by 38
Application of Subcritical Water to Dechlorinate Polyvinyl Chloride Electric Wires
Soler, A., Conesa, J. A., & Ortuño, N. (2018) · Energies · doi:10.3390/en11102612 · Cited by 33
Role of power to liquids and biomass to liquids in a nearly renewable energy system
Ikäheimo, J., Pursiheimo, E., Kiviluoma, J., & Holttinen, H. (2019) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2018.5007 · Cited by 28
Yoshioka, T., Grause, G., Otani, S., & Okuwaki, A. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.08.010 · Cited by 20
Investigation of Performance Analysis and Emission Characteristics of Waste Plastic Fuel
Ruban, M., Ramasubramanian, S., Pugazhenthi, R., & Sivaganesan, S. (2017) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/183/1/012037 · Cited by 20
Promotional effect of copper(II) chloride on the thermal degradation of poly(ethylene terephthalate)
Chiu, S.-J., & Cheng, W.-H. (2000) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00087-5 · Cited by 14
Cited by
Plastic waste and its management strategies for environmental sustainability
Evode, N., Qamar, S. A., Bilal, M., Barceló, D., & Iqbal, H. M. N. (2021) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2021.100142 · Cited by 800
Dogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 698
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Plastic futures and their CO2 emissions
Stegmann, P., Daioglou, V., Londo, M., van Vuuren, D. P., & Junginger, M. (2022) · Nature · doi:10.1038/s41586-022-05422-5 · Cited by 572
Solar-driven reforming of solid waste for a sustainable future
Uekert, T., Pichler, C. M., Schubert, T., & Reisner, E. (2020) · Nature Sustainability · doi:10.1038/s41893-020-00650-x · Cited by 354
Metadata
- Authors
- Qureshi, M. S., Oasmaa, A., Pihkola, H., Deviatkin, I., Tenhunen, A., Mannila, J., Minkkinen, H., Pohjakallio, M., & Laine-Ylijoki, J.
- Venue
- Journal of Analytical and Applied Pyrolysis
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 152
- Pages
- 104804
- ISSN
- 0165-2370 (ISSN-L)
- OpenAlex
- W2963754836
- Cited by
- 778
- References
- 51
- FWCI
- 24.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.