The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Spinel-structured high entropy oxide (FeCoNiCrMn)3O4 as anode towards superior lithium storage performance
Abstract
Abstract High entropy oxide (HEO) is a new-type inorganic material composed of multiple principle metal elements with a single-phase structure and is proved to display many potential unexpected properties such as high structural stability and superionic conductivity. Herein, a novel spinel-structured high entropy oxide (FeCoNiCrMn)3O4 is prepared by high-temperature solid state reaction and evaluated as anode for lithium-ion batteries (LIBs). In-situ high-temperature X-ray diffraction (HT-XRD) is used to reveal structure evolution of mixed oxides with the calcination temperature increase and a single-phase spinel-structured (FeCoNiCrMn)3O4 is obtained at 900 °C. The effect of temperature on structure and electrochemical performance of HEO were investigated, and the HEO-900 anode with commercial mass loading exerts higher capacity (discharge/charge, 1034/680 mAh g−1) and better rate capability (182 mAh g−1 at 2 Ag-1) than HEO-950 and HEO-1000 for its moderate particle size, and all the three samples show excellent cycling stability. Ex-situ XRD and transmission electron microscope are applied to unravel the lithium-storage mechanism of (FeCoNiCrMn)3O4, an amorphization reaction process occurs during the initial discharging and the amorphous structure is maintained in subsequent cycles. The synergetic effect of multiple metal cations with different radius, valence states and reaction potentials and entropy stabilization effect make the HEO display a superior electrochemical performance in LIBs. This work provides a new concept to design multi-element transition metal oxide anode materials by high entropy strategy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Biesinger, M. C., Payne, B. P., Grosvenor, A. P., Lau, L. W. M., Gerson, A. R., & Smart, R. S. C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2010.10.051 · Cited by 11,640
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
Pseudocapacitive oxide materials for high-rate electrochemical energy storage
Augustyn, V., Simon, P., & Dunn, B. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44164d · Cited by 5,575
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
Mixed Transition‐Metal Oxides: Design, Synthesis, and Energy‐Related Applications
Yuan, C., Wu, H. B., Xie, Y., & Lou, X. W. (. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201303971 · Cited by 2,304
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
Definitions of Pseudocapacitive Materials: A Brief Review
Jiang, Y., & Liu, J. (2019) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12028 · Cited by 1,698
Temperature effect and thermal impact in lithium-ion batteries: A review
Ma, S., Jiang, M., Tao, P., Song, C., Wu, J., Wang, J., Deng, T., & Shang, W. (2018) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2018.11.002 · Cited by 1,674
High entropy oxides for reversible energy storage
Sarkar, A., Velasco, L., Wang, D., Wang, Q., Talasila, G., de Biasi, L., Kübel, C., Brezesinski, T., Bhattacharya, S. S., Hahn, H., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-05774-5 · Cited by 1,351
Self-citationHigh‐Entropy Oxides: Fundamental Aspects and Electrochemical Properties
Sarkar, A., Wang, Q., Schiele, A., Chellali, M. R., Bhattacharya, S. S., Wang, D., Brezesinski, T., Hahn, H., Velasco, L., & Breitung, B. (2019) · Advanced Materials · doi:10.1002/adma.201806236 · Cited by 1,234
Self-citationA new class of high-entropy perovskite oxides
Jiang, S., Hu, T., Gild, J., Zhou, N., Nie, J., Qin, M., Harrington, T., Vecchio, K., & Luo, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.08.040 · Cited by 962
Self-citationZhao, Y., Li, X., Yan, B., Xiong, D., Li, D., Lawes, S., & Sun, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502175 · Cited by 910
Room temperature lithium superionic conductivity in high entropy oxides
Bérardan, D., Franger, S., Meena, A. K., & Dragoe, N. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03249d · Cited by 766
Gild, J., Samiee, M., Braun, J. L., Harrington, T., Vega, H., Hopkins, P. E., Vecchio, K., & Luo, J. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.04.010 · Cited by 636
Dąbrowa, J., Stygar, M., Mikuła, A., Knapik, A., Mroczka, K., Tejchman, W., Danielewski, M., & Martin, M. (2018) · Materials Letters · doi:10.1016/j.matlet.2017.12.148 · Cited by 628
Conversion Reaction‐Based Oxide Nanomaterials for Lithium Ion Battery Anodes
Yu, S., Lee, S. H., Lee, D. J., Sung, Y., & Hyeon, T. (2016) · Small · doi:10.1002/smll.201502299 · Cited by 499
Multi-anionic and -cationic compounds: new high entropy materials for advanced Li-ion batteries
Wang, Q., Sarkar, A., Wang, D., Velasco, L., Azmi, R., Bhattacharya, S. S., Bergfeldt, T., Düvel, A., Heitjans, P., Brezesinski, T., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00368a · Cited by 447
Self-citationA high entropy oxide (Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O) with superior lithium storage performance
Qiu, N., Chen, H., Yang, Z., Sun, S., Wang, Y., & Cui, Y. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.11.049 · Cited by 370
Nanocrystalline multicomponent entropy stabilised transition metal oxides
Sarkar, A., Djenadic, R., Usharani, N. J., Sanghvi, K. P., Chakravadhanula, V. S. K., Gandhi, A. S., Hahn, H., & Bhattacharya, S. S. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.09.018 · Cited by 365
Zhu, Y., Zhang, L., Zhao, B., Chen, H., Liu, X., Zhao, R., Wang, X., Liu, J., Chen, Y., & Liu, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901783 · Cited by 314
Phase stability and distortion in high-entropy oxides
Anand, G., Wynn, A. P., Handley, C. M., & Freeman, C. L. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.12.037 · Cited by 285
Lithium alloys and metal oxides as high-capacity anode materials for lithium-ion batteries
Liang, C., Gao, M., Pan, H., Liu, Y., & Yan, M. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.04.001 · Cited by 270
Self-citationZhang, G., & Lou, X. W. (. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201404604 · Cited by 266
A brief review: Past, present and future of lithium ion batteries
Schipper, F., & Aurbach, D. (2016) · Russian Journal of Electrochemistry · doi:10.1134/s1023193516120120 · Cited by 210
Li, Y., Sun, Z., Liu, D., Gao, Y., Wang, Y., Bu, H., Li, M., Zhang, Y., Gao, G., & Ding, S. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta11542k · Cited by 200
Biesuz, M., Spiridigliozzi, L., Dell’Agli, G., Bortolotti, M., & Sglavo, V. M. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2168-9 · Cited by 182
Mao, A., Quan, F., Xiang, H.-Z., Zhang, Z.-G., Kuramoto, K., & Xia, A.-L. (2019) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2019.05.073 · Cited by 176
Batteries Safety: Recent Progress and Current Challenges
Ould Ely, T., Kamzabek, D., & Chakraborty, D. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00071 · Cited by 158
Li, G., Huang, Z., Chen, J., Fu, Y., Liu, J., Li, O. L., Sun, S., & Shi, Z. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta11985j · Cited by 135
Entropic phase transformation in nanocrystalline high entropy oxides
Dupuy, A. D., Wang, X., & Schoenung, J. M. (2018) · Materials Research Letters · doi:10.1080/21663831.2018.1554605 · Cited by 113
Yu, X., Qu, B., Zhao, Y., Li, C., Chen, Y., Sun, C., Gao, P., & Zhu, C. (2015) · Chemistry - A European Journal · doi:10.1002/chem.201503897 · Cited by 63
Zhang, C., Wang, L., Zhao, Y., Tian, Y., & Liang, J. (2016) · Carbon · doi:10.1016/j.carbon.2016.05.057 · Cited by 54
Shi, M., Huang, Z., Liu, H., He, J., Zeng, W., Wu, Q., Zhao, Y., Tian, M., & Mu, S. C. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.135059 · Cited by 30
Cited by
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
Self-citationHigh-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Zhao, B., Du, Y., Yan, Z., Rao, L., Chen, G., Yuan, M., Yang, L., Zhang, J., & Che, R. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202209924 · Cited by 493
High entropy oxides-exploring a paradigm of promising catalysts: A review
Albedwawi, S. H., AlJaberi, A., Haidemenopoulos, G. N., & Polychronopoulou, K. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109534 · Cited by 343
Triolo, C., Moulaee, K., Ponti, A., Pagot, G., Di Noto, V., Pinna, N., Neri, G., & Santangelo, S. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202306375 · Cited by 111
Metadata
- Authors
- Wang, D., Jiang, S., Duan, C., Mao, J., Dong, Y., Dong, K., Wang, Z., Luo, S., Liu, Y., & Qi, X.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 844
- Pages
- 156158
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W3037572863
- Cited by
- 383
- References
- 36
- FWCI
- 14.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.