The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys
Open accessAbstract
The microstructures, mechanical, corrosion, and wear behaviors of the TixZrNbTaMo (x = 0.5, 1, 1.5, and 2, molar ratio) high entropy alloys (HEAs) were studied. It was found that the Ti-Zr-Nb-Ta-Mo HEAs showed a dendrite structure with two body-centered-cubic (BCC) solid solution phases. The Ti0.5ZrNbTaMo HEA exhibited a high hardness of about 500 HV, high compressive strength approaching 2,600 MPa, and large plastic strain of over 30%. Furthermore, the highly-protective oxide films formed on the surface of Ti-Zr-Nb-Ta-Mo HEAs in the phosphate buffer saline (PBS) solution, which resulted in the high corrosion resistance of the HEAs. The Ti-Zr-Nb-Ta-Mo HEAs exhibited the greater dry- and wet-wear resistance than that of the traditional biomedical Ti6Al4V alloy. The results also indicated that with the decrease in the Ti content, the wear resistance of the Ti-Zr-Nb-Ta-Mo HEAs in the PBS solution improved. Finally, the Ti0.5ZrNbTaMo alloy presented the highest corrosive wear resistance among the four HEAs owing to its combination of good mechanical properties and high chemical stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Self-citationA critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Contact and Rubbing of Flat Surfaces
Archard, J. F. (1953) · Journal of Applied Physics · doi:10.1063/1.1721448 · Cited by 7,892
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Wang, W. H., Dong, C., & Shek, C. H. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.03.001 · Cited by 2,803
Self-citationChen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
He, J. Y., Liu, W. H., Wang, H., Wu, Y., Liu, X. J., Nieh, T. G., & Lu, Z. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.09.037 · Cited by 1,529
Corrosion-Resistant High-Entropy Alloys: A Review
Shi, Y., Yang, B., & Liaw, P. (2017) · Metals · doi:10.3390/met7020043 · Cited by 1,038
Self-citationGao, X., Lu, Y., Zhang, B., Liang, N., Wu, G., Sha, G., Liu, J., & Zhao, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.041 · Cited by 887
Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys
Juan, C.-C., Tsai, M.-H., Tsai, C.-W., Lin, C.-M., Wang, W.-R., Yang, C.-C., Chen, S.-K., Lin, S.-J., & Yeh, J.-W. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.03.013 · Cited by 633
Self-citationWu, Y. D., Cai, Y. H., Wang, T., Si, J. J., Zhu, J., Wang, Y. D., & Hui, X. D. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.05.134 · Cited by 610
Cytotoxicity evaluation of 43 metal salts using murine fibroblasts and osteoblastic cells
Yamamoto, A., Honma, R., & Sumita, M. (1998) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(199802)39:2<331::aid-jbm22>3.0.co;2-e · Cited by 569
Microstructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy
Guo, N. N., Wang, L., Luo, L. S., Li, X. Z., Su, Y. Q., Guo, J. J., & Fu, H. Z. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.019 · Cited by 426
Wang, S.-P., & Xu, J. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.12.057 · Cited by 402
Ibrahim, M. Z., Sarhan, A. A. D., Yusuf, F., & Hamdi, M. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.04.231 · Cited by 344
Ye, Y. X., Liu, C. Z., Wang, H., & Nieh, T. G. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.01.014 · Cited by 295
Self-citationWear Characteristics of Metallic Biomaterials: A Review
Hussein, M., Mohammed, A., & Al-Aqeeli, N. (2015) · Materials · doi:10.3390/ma8052749 · Cited by 286
Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy
Wang, Y., Yang, Y., Yang, H., Zhang, M., Ma, S., & Qiao, J. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.05.029 · Cited by 280
Formation, structure and properties of biocompatible TiZrHfNbTa high-entropy alloys
Yuan, Y., Wu, Y., Yang, Z., Liang, X., Lei, Z., Huang, H., Wang, H., Liu, X., An, K., Wu, W., et al. (2019) · Materials Research Letters · doi:10.1080/21663831.2019.1584592 · Cited by 257
The role of fracture toughness in the wear of metals
Hornbogen, E. (1975) · Wear · doi:10.1016/0043-1648(75)90280-x · Cited by 231
Bio-corrosion behavior and in vitro biocompatibility of equimolar TiZrHfNbTa high-entropy alloy
Yang, W., Liu, Y., Pang, S., Liaw, P. K., & Zhang, T. (2020) · Intermetallics · doi:10.1016/j.intermet.2020.106845 · Cited by 167
Self-citationTribo-electrochemical characterization of metallic biomaterials for total joint replacement
Diomidis, N., Mischler, S., More, N. S., & Roy, M. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.09.034 · Cited by 139
Fundamental electronic structure and multiatomic bonding in 13 biocompatible high-entropy alloys
Ching, W. Y., San, S., Brechtl, J. M., Sakidja, R., Zhang, M., & Liaw, P. K. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0321-x · Cited by 116
Self-citationWear behavior of high entropy alloys containing soft dispersoids (Pb, Bi)
Yadav, S., Kumar, A., & Biswas, K. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.06.020 · Cited by 56
Cited by
Refractory high-entropy alloys: A focused review of preparation methods and properties
Xiong, W., Guo, A. X. Y., Zhan, S., Liu, C.-T., & Cao, S. C. (2023) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.08.046 · Cited by 429
Recent advances in tribology of high entropy alloys: A critical review
Kumar, D. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101106 · Cited by 310
Bhardwaj, V., Zhou, Q., Zhang, F., Han, W., Du, Y., Hua, K., & Wang, H. (2021) · Tribology International · doi:10.1016/j.triboint.2021.107031 · Cited by 260
Xiao, G., Yang, W., Zhu, Q., Song, S., Cao, G.-H., & Ren, Z. (2023) · Scripta Materialia · doi:10.1016/j.scriptamat.2022.115099 · Cited by 33
Extremely strong coupling s-wave superconductivity in the medium-entropy alloy TiHfNbTa
Zeng, L., Hu, X., Boubeche, M., Li, K., Li, L., Yu, P., Wang, K., Zhang, C., Jin, K., Yao, D.-X., et al. (2023) · Science China Physics, Mechanics & Astronomy · doi:10.1007/s11433-023-2113-6 · Cited by 29
Metadata
- Authors
- Hua, N., Wang, W., Wang, Q., Ye, Y., Lin, S., Zhang, L., Guo, Q., Brechtl, J., & Liaw, P. K.
- Venue
- Journal of Alloys and Compounds
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 861
- Pages
- 157997
- ISSN
- 0925-8388 (ISSN-L)
- OpenAlex
- W3108011493
- Cited by
- 326
- References
- 28
- FWCI
- 18.12
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.