Cited by 814Polymer Surface Interaction Studiesbiodegradable polymer synthesis and propertiesPolymer crystallization and properties

The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.

FTIR study of polycaprolactone chain organization at interfaces

Elzein, Tamara, Nasser-Eddine, Mohamad, Delaite, Christelle, Bistac, Sophie, Dumas, Philippe·2004·Journal of Colloid and Interface Science

DOI 10.1016/j.jcis.2004.02.001

Open this paper in CoChat — free account

Abstract

Polycaprolactone (PCL), extensively known as a biomaterial, is the subject of this paper. Knowing well that some biomaterial applications exhibit specific chain organization, we focused our study on the orientation of PCL chains when this polymer is adsorbed (spin-coated) on inert substrates such as gold-coated glass slides. The main technique allowing adsorbed thin films analysis that we chose is polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS), which permits qualitative and quantitative determination of chain anisotropy in the confined layers at the interface. Based on our spectroscopic results, we achieved an adsorption model of PCL chains and we calculated orientation angles with respect to the substrate normal. Calculated values show a quasi-perpendicular deposition of PCL chains on the gold substrate. Moreover, PCL thin films remain highly crystalline, a fact which could be the basis of the important anisotropy of PCL chains.

Integrity signals

Registry

Crossref · 10.1016/j.jcis.2004.02.001

Cites

24 of 24 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Infrared spectra of complex molecules
Eggers, D. F. (1959) · Journal of Chemical Education · doi:10.1021/ed036p366.4 · Cited by 3,057
Infrared characteristic group frequencies
Goldstein, M. (1981) · Endeavour · doi:10.1016/0160-9327(81)90159-9 · Cited by 2,632
Infrared characteristic group frequencies
Socrates, G. (1980) · Medical Entomology and Zoology · Cited by 2,527
A novel degradable polycaprolactone networks for tissue engineering
Kweon, H. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00370-8 · Cited by 694
Spontaneously organized molecular assemblies. 2. Quantitative infrared spectroscopic determination of equilibrium structures of solution-adsorbed n-alkanoic acids on an oxidized aluminum surface
Allara, D. L., & Nuzzo, R. G. (1985) · Langmuir · doi:10.1021/la00061a008 · Cited by 691
Infrared and raman spectroscopy: Methods and applications
(1996) · Journal of Molecular Structure · doi:10.1016/0022-2860(96)88418-3 · Cited by 467
Anisotropic orientation in molecular monolayers by infrared spectroscopy
Rabolt, J. F., Burns, F. C., Schlotter, N. E., & Swalen, J. D. (1983) · The Journal of Chemical Physics · doi:10.1063/1.444799 · Cited by 353
Biodegradable blends and composites of polycaprolactone and starch derivatives
Koenig, M. F., & Huang, S. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90934-t · Cited by 336
Polarization Modulation FT-IR Spectroscopy of Surfaces and Ultra-Thin Films: Experimental Procedure and Quantitative Analysis
Buffeteau, T., Desbat, B., & Turlet, J. M. (1991) · Applied Spectroscopy · doi:10.1366/0003702914337308 · Cited by 324
Miscibility and morphology in crystalline/amorphous blends of poly(caprolactone)/poly(4-vinylphenol) as studied by DSC, FTIR, and 13 C solid state NMR
Wang, J., Cheung, M. K., & Mi, Y. (2002) · Polymer · doi:10.1016/s0032-3861(01)00673-5 · Cited by 157

Show all 24 references

Research works printed but not linked: 3

Buffeteau, 1997, Mikrochim. Acta, 14, 627
Wunderlich, 1973, vol. 3
Coleman, 1979, J. Polym. Sci. B, 17, 837

Sorted by citations

Items 101–200 of 813

Mimicking nature: Fabrication of 3D anisotropic electrospun polycaprolactone scaffolds for cartilage tissue engineering applications
Girão, A. F., Semitela, Â., Ramalho, G., Completo, A., & Marques, P. A. A. P. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.08.001 · Cited by 66
Identification and toxicity towards aquatic primary producers of the smallest fractions released from hydrolytic degradation of polycaprolactone microplastics
Tamayo-Belda, M., Pulido‐Reyes, G., González-Pleiter, M., Martín-Betancor, K., Leganés, F., Rosal, R., & Fernández‐Piñas, F. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.134966 · Cited by 69
Nanoceria Can Act as the Cues for Angiogenesis in Tissue-Engineering Scaffolds: Toward Next-Generation in Situ Tissue Engineering
Augustine, R., Dalvi, Y. B., Dan, P., George, N., Helle, D. U., Varghese, R., Thomas, S., Menu, P., & Sandhyarani, N. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01102 · Cited by 67
Three‐dimensional printed polycaprolactone‐microcrystalline cellulose scaffolds
Alemán‐Domínguez, M. E., Giusto, E., Ortega, Z., Tamaddon, M., Benítez, A. N., & Liu, C. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34142 · Cited by 65
Emulsion electrospinning of sodium alginate/poly(ε-caprolactone) core/shell nanofibers for biomedical applications
Norouzi, M., Ghasemi‐Mobarakeh, L., Itel, F., Schoeller, J., Fashandi, H., Borzì, A., Neels, A., Fortunato, G., & Rossi, R. M. (2022) · Nanoscale Advances · doi:10.1039/d2na00201a · Cited by 65
Fabrication of polylactic acid/paclitaxel nano fibers by electrospinning for cancer therapeutics
Y., H., Chan, V., Li, C., Hsieh, J. H., Lin, P. H., Tsai, Y., & Chen, Y. (2020) · BMC Chemistry · doi:10.1186/s13065-020-00711-4 · Cited by 64
Degradation of poly(ε-caprolactone) by a thermophilic bacterium Ralstonia sp. strain MRL-TL isolated from hot spring
Shah, A. A., Nawaz, A., Kanwal, L., Hasan, F., Khan, S., & Badshah, M. (2014) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2014.11.017 · Cited by 65
Chemical surface modification of poly-ε-caprolactone improves Schwann cell proliferation for peripheral nerve repair
de Luca, A. C., Terenghi, G., & Downes, S. (2012) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1509 · Cited by 64
Development of bacterial cellulose and polycaprolactone (PCL) based composite for medical material
Kotcharat, P., Chuysinuan, P., Thanyacharoen, T., Techasakul, S., & Ummartyotin, S. (2021) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2021.100404 · Cited by 63
Bio-reduction and synchronous removal of hexavalent chromium from aqueous solutions using novel microbial cell/algal-derived biochar particles: Turning an environmental problem into an opportunity
Huang, S., Chen, X., Wang, D., Jia, H., & Wu, L. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123304 · Cited by 63
Cilostazol-Loaded Poly(ε-Caprolactone) Electrospun Drug Delivery System for Cardiovascular Applications
Rychter, M., Baranowska‐Korczyc, A., Milanowski, B., Jarek, M., Maciejewska, B. M., Coy, E. L., & Lulek, J. (2018) · Pharmaceutical Research · doi:10.1007/s11095-017-2314-0 · Cited by 63
Antibacterial performance of solvent cast polycaprolactone (PCL) films containing essential oils
Martínez‐Abad, A., Sánchez, G., Fuster, V., Lagaron, J. M., & Ocio, M. J. (2013) · Food Control · doi:10.1016/j.foodcont.2013.04.025 · Cited by 62
Three different kinds of weak C-H⋯O=C inter- and intramolecular interactions in poly(ε-caprolactone) studied by using terahertz spectroscopy, infrared spectroscopy and quantum chemical calculations
Funaki, C., Yamamoto, S., Hoshina, H., Ozaki, Y., & Sato, H. (2018) · Polymer · doi:10.1016/j.polymer.2018.01.025 · Cited by 62
Regulation Effects of Biomimetic Hybrid Scaffolds on Vascular Endothelium Remodeling
Zhao, Q., Cui, H., Wang, J., Chen, H., Wang, Y., Zhang, L., Du, X., & Wang, M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06205 · Cited by 62
An in situ photopolymerized composite solid electrolyte from halloysite nanotubes and comb-like polycaprolactone for high voltage lithium metal batteries
Xu, H., Wei, Y., Wang, Q., Han, B., Wang, J., Wang, C., & Deng, Y. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00745a · Cited by 61
Functionalized Polymeric Membrane with Enhanced Mechanical and Biological Properties to Control the Degradation of Magnesium Alloy
Wong, H. M., Zhao, Y., Leung, F. K. L., Xi, T., Zhang, Z., Zheng, Y., Wu, S., Luk, K. D. K., Cheung, K., Chu, P. K.-H., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601269 · Cited by 59
Cell studies on Electrohydrodynamic (EHD)-3D-bioprinted Bacterial Cellulose\Polycaprolactone scaffolds for tissue engineering
Altun, E., Ekren, N., Kuruca, S. E., & Gündüz, O. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.09.085 · Cited by 59
Scalable synthesis of 2D hydrogen-substituted graphdiyne on Zn substrate for high-yield N2 fixation
Yang, Q., Guo, Y., Gu, J., Li, N., Wang, C., Liu, Z., Li, X., Huang, Z., Wei, S., Xu, S., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105283 · Cited by 59
Incorporation of growth factor loaded microspheres into polymeric electrospun nanofibers for tissue engineering applications
Gungor‐Ozkerim, P. S., Balkan, T., Köse, G. T., Saraç, A. S., & Kök, F. N. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34857 · Cited by 59
Melt Crystallization and Crystal Transition of Poly(butylene adipate) Revealed by Infrared Spectroscopy
Yan, C., Zhang, Y., Hu, Y., Ozaki, Y., Shen, D., Gan, Z., Yan, S., & Takahashi, I. (2008) · The Journal of Physical Chemistry B · doi:10.1021/jp077195i · Cited by 58
Preparation and characterization of bioactive composite scaffolds from polycaprolactone nanofibers-chitosan-oxidized starch for bone regeneration
Nourmohammadi, J., Ghaee, A., & Liavali, S. H. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.11.055 · Cited by 57
Injectable methotrexate loaded polycaprolactone microspheres: Physicochemical characterization, biocompatibility, and hemocompatibility evaluation
Dhanka, M., Shetty, C., & Srivastava, R. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.08.055 · Cited by 59
Injectable biodegradable bi-layered capsule for sustained delivery of bevacizumab in treating wet age-related macular degeneration
Jiang, P., Chaparro, F. J., Cuddington, C. T., Palmer, A. F., Ohr, M. P., Lannutti, J. J., & Swindle‐Reilly, K. E. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.01.036 · Cited by 57
Nanocellulose and Polycaprolactone Nanospun Composite Membranes and Their Potential for the Removal of Pollutants from Water
Palacios-Hinestroza, H., Ureña-Saborío, H., Zurita, F., de León, A. A. G., Gunasekaran, S., & Sulbarán-Rangel, B. (2020) · Molecules · doi:10.3390/molecules25030683 · Cited by 57
Composition-dependent sensing mechanism of electrospun conductive polymer composite nanofibers
Low, K., Horner, C. B., Li, C., Ico, G., Bosze, W., Myung, N. V., & Nam, J. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.09.121 · Cited by 56
Ultrasound assisted lipase catalyzed synthesis of poly-6-hydroxyhexanoate
Gumel, A. M., Annuar, M. S. M., Yusuf Chisti, B., & Heidelberg, T. (2011) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2011.10.016 · Cited by 56
Dexamethasone-loaded poly(ɛ-caprolactone)/silica nanoparticles composites prepared by supercritical CO2 foaming/mixing and deposition
de Matos, M. B. C., Piedade, A. P., Alvarez‐Lorenzo, C., Concheiro, Á., Braga, M. E. M., & de Sousa, H. C. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.08.042 · Cited by 56
Non-mulberry silk fibroin grafted poly (Є-caprolactone)/nano hydroxyapatite nanofibrous scaffold for dual growth factor delivery to promote bone regeneration
Bhattacharjee, P., Naskar, D., Maiti, T. K., Bhattacharya, D., & Kundu, S. C. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.03.020 · Cited by 57
The development of an alginate/polycaprolactone composite scaffold for in situ transfection application
Hu, W., Wu, Y.-C., & Hu, Z.-C. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.030 · Cited by 56
Hydrolytic Degradation of PCL–PLLA Semi-IPNs Exhibiting Rapid, Tunable Degradation
Woodard, L. N., & Grunlan, M. A. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01135 · Cited by 55
Synthesis of a hyperbranched polyamide charring agent and its flame-retarding and toughening behavior in epoxy resin
Wang, W., Liu, Y., Wen, H., & Wang, Q. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109479 · Cited by 55
Poly(ε‐caprolactone) Biomaterial Sterilized by E‐Beam Irradiation
Filipczak, K., Wozniak, M., Ulanski, P., Olah, L., Przybytniak, G., Olkowski, R. M., Lewandowska‐Szumiel, M., & Rosiak, J. M. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200500215 · Cited by 54
In vitro degradation behaviour of hybrid electrospun scaffolds of polycaprolactone and strontium-containing hydroxyapatite microparticles
Melnik, E. V., Shkarina, S., Ivlev, S. I., Weinhardt, V., Baumbach, T., Chaikina, M. V., Surmeneva, M. A., & Анатольевич, С. Р. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.06.017 · Cited by 54
Hydrolytic Degradation of Porous Crosslinked Poly(ε-Caprolactone) Synthesized by High Internal Phase Emulsion Templating
Erdal, N. B., Lando, G. A., Yadav, A. L., Srivastava, R. K., & Hakkarainen, M. (2020) · Polymers · doi:10.3390/polym12081849 · Cited by 54
Crystallization kinetics and crystalline structure of biodegradable Poly(ethylene adipate)
Yang, J., Pan, P., Dong, T., & Inoue, Y. (2009) · Polymer · doi:10.1016/j.polymer.2009.11.065 · Cited by 55
Synthesis and characterization of chitosan-grafted-polycaprolactone micelles for modulate intestinal paclitaxel delivery
Almeida, A., Silva, D., Gonçalves, V. M. F., & Sarmento, B. F. C. C. (2017) · Drug Delivery and Translational Research · doi:10.1007/s13346-017-0357-8 · Cited by 55
Biomimetic design of bone substitutes based on cuttlefish bone‐derived hydroxyapatite and biodegradable polymers
Rogina, A., Antunović, M., & Milovac, D. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34111 · Cited by 57
Poly (ε-caprolactone) nanoparticles loaded with indomethacin and Nigella Sativa L. essential oil for the topical treatment of inflammation
Badri, W., Asbahani, A. E., Miladi, K., Baraket, A., Agusti, G., Nazari, Q. A., Errachid, A., Fessi, H., & Elaı̈ssari, A. (2018) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2018.05.022 · Cited by 54
Encapsulation of geranyl cinnamate in polycaprolactone nanoparticles
Zanetti, M., Mazon, L. R., de Meneses, A. C., Silva, L. L., de Araújo, P. H. H., Fiori, M. A., & de Olíveira, D. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.12.005 · Cited by 54
Potential of inherent RGD containing silk fibroin–poly (Є-caprolactone) nanofibrous matrix for bone tissue engineering
Bhattacharjee, P., Kundu, B., Naskar, D., Kim, H., Bhattacharya, D., Maiti, T. K., & Kundu, S. C. (2015) · Cell and Tissue Research · doi:10.1007/s00441-015-2232-6 · Cited by 54
Polymer hydrogel functionalized with biodegradable nanoparticles as composite system for controlled drug delivery
Rossi, F., Ferrari, R., Castiglione, F., Mele, A., Perale, G., & Moscatelli, D. (2014) · Nanotechnology · doi:10.1088/0957-4484/26/1/015602 · Cited by 53
Synthesis and characterization of polycaprolactone for anterior cruciate ligament regeneration
Cansu, G. A., Sevinc, B., Bayrak, E., & Erişken, C. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.071 · Cited by 53
Co-nanoencapsulation of antimalarial drugs increases their in vitro efficacy against Plasmodium falciparum and decreases their toxicity to Caenorhabditis elegans
Pereira, K. V., Maciel, T. R., Forno, A. H. D., Teixeira, F. E. G., da Fonseca, A. L., Varotti, F. D. P., Fajardo, A. R., Ávila, D. S., & Haas, S. E. (2018) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2018.03.014 · Cited by 53
Amine-functionalized Single-walled Carbon Nanotube/Polycaprolactone Electrospun Scaffold for Bone Tissue Engineering: in vitro Study
Tohidlou, H., Shafiei, S. S., Abbasi, S., Asadi‐Eydivand, M., & Fathi‐Roudsari, M. (2019) · Fibers and Polymers · doi:10.1007/s12221-019-1262-1 · Cited by 53
Developing active poly(vinyl alcohol)-based membranes with encapsulated antimicrobial enzymes via electrospinning for food packaging
Alonso‐González, M., Corral-González, A., Félix, M., Romero, A., & Martín‐Alfonso, J. E. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.217 · Cited by 53
Structural relaxation behavior of strain hardened shape memory polymer fibers for self‐healing applications
Zhang, P., & Li, G. (2013) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23295 · Cited by 52
Fabrication and Characterization of Core–Shell Nanofibers Using a Next-Generation Airbrush for Biomedical Applications
Singh, R., Ahmed, F., Polley, P., & Giri, J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13809 · Cited by 52
Ocular biocompatibility of dexamethasone acetate loaded poly(ɛ-caprolactone) nanofibers
da Silva, G. R., de Lima, T. H., Fernandes-Cunha, G. M., Oréfice, R. L., Silva‐Cunha, A., Zhao, M., & Béhar‐Cohen, F. (2019) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2019.05.010 · Cited by 52
Physical, Thermal, and Antibacterial Effects of Active Essential Oils with Potential for Biomedical Applications Loaded onto Cellulose Acetate/Polycaprolactone Wet-Spun Microfibers
Felgueiras, H. P., Homem, N. C., Teixeira, M. A., Ribeiro, A. R. M., Antunes, J. C., & de Amorim, M. T. P. (2020) · Biomolecules · doi:10.3390/biom10081129 · Cited by 52
Structural and Thermo-Mechanical Properties of Poly(ε-Caprolactone) Modified by Various Peroxide Initiators
Przybysz-Romatowska, M., Hejna, A., Haponiuk, J. T., & Formela, K. (2019) · Polymers · doi:10.3390/polym11071101 · Cited by 54
Bioactive glass microspheres as reinforcement for improving the mechanical properties and biological performance of poly(ε‐caprolactone) polymer for bone tissue regeneration
Lei, B., Shin, K.-H., Noh, D., Koh, Y., Choi, W., & Kim, H. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.32659 · Cited by 51
Investigating the potential of combined growth factors delivery, from non-mulberry silk fibroin grafted poly(ɛ-caprolactone)/hydroxyapatite nanofibrous scaffold, in bone tissue engineering
Bhattacharjee, P., Naskar, D., Maiti, T. K., Bhattacharya, D., & Kundu, S. C. (2016) · Applied Materials Today · doi:10.1016/j.apmt.2016.09.007 · Cited by 51
Photodegradation of polymer-CNT nanocomposites: effect of CNT loading and CNT release characteristics
Lankone, R. S., Wang, J., Ranville, J. F., & Fairbrother, D. H. (2017) · Environmental Science Nano · doi:10.1039/c6en00669h · Cited by 51
Characterization of biomimetic silicate- and strontium-containing hydroxyapatite microparticles embedded in biodegradable electrospun polycaprolactone scaffolds for bone regeneration
Анатольевич, С. Р., Shkarina, S., Syromotina, D. S., Melnik, E. V., Shkarin, R., Selezneva, I. I., Ermakov, A. M., Ivlev, S. I., Cecilia, A., Weinhardt, V., et al. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.01.042 · Cited by 51
A bio-friendly, green route to processable, biocompatible graphene/polymer composites
Murray, E., Sayyar, S., Thompson, B. C., Gorkin, R. A., III, Officer, D. L., & Wallace, G. G. (2015) · RSC Advances · doi:10.1039/c5ra07210g · Cited by 50
Nanoparticle formulation of poly(ɛ-caprolactone-co-lactide)-d-α-tocopheryl polyethylene glycol 1000 succinate random copolymer for cervical cancer treatment
Ma, Y., Huang, L., Song, C. X., Zeng, X., Liu, G., & Mei, L. (2010) · Polymer · doi:10.1016/j.polymer.2010.10.029 · Cited by 50
Chlorhexidine Nanocapsule Drug Delivery Approach to the Resin-Dentin Interface
Priyadarshini, B. M., Selvan, S. T., Lu, T. B., Xie, H., Neo, J. E., & Fawzy, A. (2016) · Journal of Dental Research · doi:10.1177/0022034516656135 · Cited by 50
Substrate‐Dependent Molecular and Nanostructural Orientation of Nafion Thin Films
Kushner, D. I., Kusoglu, A., Podraza, N. J., & Hickner, M. A. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902699 · Cited by 50
Flotation separation of bastnaesite and fluorite using styrylphosphonic acid and cinnamohydroxamic acid as collectors
Guo, Z., Tian, M., Qian, G., Zhou, Y., Gao, Z., & Sun, W. (2022) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2022.119766 · Cited by 49
Structural and morphological changes in Poly(caprolactone)/poly(vinyl chloride) blends caused by UV irradiation
Martins-Franchetti, S. M., de Campos, A., Egerton, T. A., & White, J. R. (2007) · Journal of Materials Science · doi:10.1007/s10853-007-2210-9 · Cited by 49
In situ functionalization of wet-spun fibre meshes for bone tissue engineering
Leonor, I. B., Rodrigues, M. T., Gomes, M. E., & Reis, R. L. (2010) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.294 · Cited by 48
In vitro cell uptake evaluation of curcumin-loaded PCL/F68 nanoparticles for potential application in neuronal diseases
Prado-Audelo, M. L. D., Magaña, J. J., Mejía-Contreras, B. A., Borbolla‐Jiménez, F. V., Giraldo‐Gómez, D. M., Piña-Barba, M. C., Quintanar‐Guerrero, D., & Leyva‐Gómez, G. (2019) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2019.05.042 · Cited by 48
Bioglass®/chitosan-polycaprolactone bilayered composite scaffolds intended for osteochondral tissue engineering
Yao, Q., Nooeaid, P., Detsch, R., Roether, J. A., Dong, Y., Goudouri, O., Schubert, D. W., & Boccaccini, A. R. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35125 · Cited by 47
Hybrid cardiovascular sourced extracellular matrix scaffolds as possible platforms for vascular tissue engineering
Reid, J. A., & Callanan, A. (2019) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34444 · Cited by 47
Facile fabrication of eco-friendly polycaprolactone (PCL)/Poly-D, L-Lactic acid (PDLLA) modified melamine sorbent for oil-spill cleaning and water/oil (W/O) emulsion separation
Arunagiri, V., Prasannan, A., Udomsin, J., Lai, J., Wang, C., Hong, P., & Tsai, H. (2020) · Separation and Purification Technology · doi:10.1016/j.seppur.2020.118081 · Cited by 47
In situ synthesis of bacterial cellulose/polycaprolactone blends for hot pressing nanocomposite films production
Figueiredo, A. R. P., Silvestre, A. J. D., Neto, C. P., & Freire, C. S. R. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.06.001 · Cited by 47
Effect of hydroxyapatite nano-particles on morphology, rheology and thermal behavior of poly(caprolactone)/chitosan blends
Ghorbani, F., Kaffashi, B., Shokrollahi, P., Akhlaghi, S., & Hedenqvist, M. S. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.10.076 · Cited by 46
Novel hybrid scaffolds for the cultivation of osteoblast cells
Şaşmazel, H. T. (2011) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2011.07.022 · Cited by 46
Crystalline Phase of Isomorphic Poly(hexamethylene sebacate-co-hexamethylene adipate) Copolyester: Effects of Comonomer Composition and Crystallization Temperature
Liang, Z., Pan, P., Zhu, B., Dong, T., Hua, L., & Inoue, Y. (2010) · Macromolecules · doi:10.1021/ma1000546 · Cited by 46
Solvent-free bulk polymerization of lignin-polycaprolactone (PCL) copolymer and its thermoplastic characteristics
Park, I., Sun, H., Kim, S., Kim, Y., Kim, G. E., Lee, Y., Kim, T., Choi, H. R., Suhr, J., & Nam, J. (2019) · Scientific Reports · doi:10.1038/s41598-019-43296-2 · Cited by 46
Crystallization of Poly(ethylene)s with Regular Phosphoester Defects Studied at the Air–Water Interface
Hasan, N., Busse, K., Haider, T. P., Wurm, F. R., & Kreßler, J. (2020) · Polymers · doi:10.3390/polym12102408 · Cited by 45
Polyaniline/poly(ε-caprolactone) composite electrospun nanofiber-based gas sensors: optimization of sensing properties by dopants and doping concentration
Low, K., Chartuprayoon, N., Echeverria, C., Li, C., Bosze, W., Myung, N. V., & Nam, J. (2014) · Nanotechnology · doi:10.1088/0957-4484/25/11/115501 · Cited by 45
Stability studies of plasma modification effects of polylactide and polycaprolactone surface layers
Moraczewski, K., Stepczyńska, M., Malinowski, R., Rytlewski, P., Jagodziński, B., & Zenkiewicz, M. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.03.171 · Cited by 45
Development of UV cross-linked gelatin coated electrospun poly(caprolactone) fibrous scaffolds for tissue engineering
Correia, T. R., Ferreira, P. C. N., Vaz, R., Alves, P., Figueiredo, M. M., Correia, I. J., & Coimbra, P. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.05.045 · Cited by 45
Preparation of PCL/lecithin/bacteriocin CAMT6 antimicrobial and antioxidant nanofiber films using emulsion electrospinning: Characteristics and application in chilled salmon preservation
Li, Q., Liang, W., Lv, L., Fang, Z., Xu, D., Liao, J., & Liu, Y. (2023) · Food Research International · doi:10.1016/j.foodres.2023.113747 · Cited by 44
Two-Dimensional Self-Assembly of Linear Poly(ethylene oxide)- b -poly(ε-caprolactone) Copolymers at the Air−Water Interface
Joncheray, T. J., Denoncourt, K. M., Meier, M. A. R., Schubert, U. S., & Duran, R. S. (2007) · Langmuir · doi:10.1021/la062626u · Cited by 44
[Stress and distress in infertility among women].
Damti, O. B., Sarid, O., Sheiner, E., Zilberstein, T., & Cwikel, J. (2008) · PubMed · Cited by 44
Synthesis of PLLA-b-PCL-b-PLLA linear tri-block copolymers and their corresponding poly(ester-urethane)s: effect of the molecular weight on their crystallisation and mechanical properties
Navarro-Baena, I., Marcos-Fernández, A., Fernández-Torres, A., Kenny, J. M., & Peponi, L. (2014) · RSC Advances · doi:10.1039/c3ra44786c · Cited by 43
Mechanical behaviour of electrospun fibre-reinforced hydrogels
Strange, D. G. T., Tonsomboon, K., & Oyen, M. L. (2014) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-5123-y · Cited by 43
Synthesis, characterizations,in vitroandin vivoevaluation of Etoricoxib-loaded Poly (Caprolactone) microparticles – a potential Intra-articular drug delivery system for the treatment of Osteoarthritis
Palaniappan, A., Indulekha, S., Vijayalakshmi, S., & Srivastava, R. (2015) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2015.1125564 · Cited by 43
Lipase-mediated degradation of poly-ε-caprolactone in toluene: Behavior and its action mechanism
Aris, M. H., Annuar, M. S. M., & Ling, T. C. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.08.015 · Cited by 43
Photodegradation Mechanisms on Poly(ε-caprolactone) (PCL)
França, D. C., Morais, D. D., Bezerra, E. B., Araújo, E. M., & Wellen, R. M. R. (2018) · Materials Research · doi:10.1590/1980-5373-mr-2017-0837 · Cited by 43
Melt electrospinning of daunorubicin hydrochloride-loaded poly (ε-caprolactone) fibrous membrane for tumor therapy
Lian, H., & Meng, Z. (2017) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.03.003 · Cited by 42
Influence of PCL on the epoxy workability, insights from thermal and spectroscopic analyses
Barros, J. J. P., Silva, I. D. D. S., Jaques, N. G., Fook, M. V. L., & Wellen, R. M. R. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106679 · Cited by 42
Temperature‐dependent polymorphic crystalline structure and melting behavior of poly(butylene adipate) investigated by time‐resolved FTIR spectroscopy
Yang, J., Li, Z., Pan, P., Zhu, B., Dong, T., & Inoue, Y. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21798 · Cited by 41
Microfibrous silver-coated polymeric scaffolds with tunable mechanical properties
Kalakonda, P., Aldhahri, M. M., Abdel-wahab, M. S., Tamayol, A., Mollazadeh‐Moghaddam, K., Rached, F. B., Pain, A., Khademhosseini, A., Memić, A., & Chaı̈eb, S. (2017) · RSC Advances · doi:10.1039/c6ra25151j · Cited by 41
Molecular mobility, crystallization and melt-memory investigation of molar mass effects on linear and hydroxyl-terminated Poly(ε-caprolactone)
Klonos, P. Α., Bikiaris, N. D., Christodoulou, E., Zamboulis, A., Papageorgiou, G. Z., & Kyritsis, A. (2022) · Polymer · doi:10.1016/j.polymer.2022.124603 · Cited by 42
Multi-Stimuli-Responsive Tadpole-like Polymer/Lipid Janus Microrobots for Advanced Smart Material Applications
Altas, B. O., Goktas, C., Topcu, G., & Aydoğan, N. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c18826 · Cited by 43
Surface modification of poly(lactide-co-glycolide) nanoparticles by d-α-tocopheryl polyethylene glycol 1000 succinate as potential carrier for the delivery of drugs to the brain
Jalali, N., Moztarzadeh, F., Mozafari, M., Asgari, S., Motevalian, M., & Alhosseini, S. N. (2011) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2011.10.012 · Cited by 40
Fabrication of Cell-Loaded Two-Phase 3D Constructs for Tissue Engineering
Zehnder, T., Freund, T., Demir, M., Detsch, R., & Boccaccini, A. R. (2016) · Materials · doi:10.3390/ma9110887 · Cited by 40
A UV-cured nanofibrous membrane of vinylbenzylated gelatin-poly(ɛ-caprolactone) dimethacrylate co-network by scalable free surface electrospinning
Bazbouz, M. B., He, L., & Tronci, G. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.05.076 · Cited by 38
A 3D nanostructured calcium-aluminum-silicate scaffold with hierarchical meso-macroporosity for bone tissue regeneration: Fabrication, sintering behavior, surface modification and in vitro studies
Bigham, A., Aghajanian, A. H., Movahedi, M., Sattary, M., Rafienia, M., & Tayebi, L. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.07.073 · Cited by 40
Effects of polydopamine coatings on nucleation modes of surface mineralization from simulated body fluid
Murari, G., Bock, N., Zhou, H., Yang, L., Liew, T., Fox, K. E., & Tran, P. A. (2020) · Scientific Reports · doi:10.1038/s41598-020-71900-3 · Cited by 43
Viscoelastic, Thermal, and Mechanical Properties of Melt-Processed Poly (ε-Caprolactone) (PCL)/Hydroxyapatite (HAP) Composites
Motloung, M. P., Mofokeng, T. G., & Ray, S. S. (2021) · Materials · doi:10.3390/ma15010104 · Cited by 39
Development of a decellularized human amniotic membrane-based electrospun vascular graft capable of rapid remodeling for small-diameter vascular applications
Liu, J., Chen, D., Zhu, X., Liu, N., Zhang, H., Tang, R., & Liu, Z. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.09.009 · Cited by 39
Aligned lovastatin-loaded electrospun nanofibers regulate collagen organization and reduce scar formation
Chen, Z., Xiao, L., Hu, C., Shen, Z., Zhou, E., Zhang, S., & Wang, Y. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.04.015 · Cited by 43
Electrically conductive MEH-PPV:PCL electrospun nanofibres for electrical stimulation of rat PC12 pheochromocytoma cells
Borah, R., Ingavle, G. C., Sandeman, S. R., Kumar, A., & Mikhalovsky, S. V. (2018) · Biomaterials Science · doi:10.1039/c8bm00559a · Cited by 39
The effect of PLGA doping of polycaprolactone films on the control of osteoblast adhesion and proliferation in vitro
Tang, Z. G., & Hunt, J. A. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.04.009 · Cited by 39
Development of Biodegradable Composites Using Polycaprolactone and Bamboo Powder
Nukala, S. G., Kong, I., Patel, V. I., Kakarla, A. B., Kong, W., & Buddrick, O. (2022) · Polymers · doi:10.3390/polym14194169 · Cited by 38
Effect of starch content on the biodegradation of polycaprolactone/starch composite for fabricating in situ pore-forming scaffolds
Ghavimi, S. A. A., Ebrahimzadeh, M. A., Shokrgozar, M. A., Solati‐Hashjin, M., & Osman, N. A. A. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.02.012 · Cited by 38

Authors: Elzein, T., Nasser-Eddine, M., Delaite, C., Bistac, S., & Dumas, P.
Corresponding author: Elzein, Tamara
ORCID: Elzein, Tamara
Delaite, Christelle
Bistac, Sophie
Venue: Journal of Colloid and Interface Science
Publisher: Elsevier BV
Published: 2004-05
Volume: 273
Issue: 2
Pages: 381-387
ISSN: 0021-9797 (ISSN-L)
DOI: 10.1016/j.jcis.2004.02.001
OpenAlex: W2086588103
Cited by: 814
References: 24
Citations by year: 2026: 42 · 2025: 77 · 2024: 56 · 2023: 64 · 2022: 63 · 2021: 61 · 2020: 68 · 2019: 64 · 2018: 72 · 2017: 45 · 2016: 39 · 2015: 34 · 2014: 25 · 2013: 23 · 2012: 15
FWCI: 3.38
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Colloid and Interface Science (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords: polycaprolactone, polymer chain orientation, interfacial adsorption, polymer thin films, gold substrate, spin-coated films, PM-IRRAS, crystallinity, adsorption modeling, biomaterials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

FTIR study of polycaprolactone chain organization at interfaces

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks