Cited by 814Polymer Surface Interaction Studiesbiodegradable polymer synthesis and propertiesPolymer crystallization and properties

The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.

FTIR study of polycaprolactone chain organization at interfaces

Elzein, Tamara, Nasser-Eddine, Mohamad, Delaite, Christelle, Bistac, Sophie, Dumas, Philippe·2004·Journal of Colloid and Interface Science

DOI 10.1016/j.jcis.2004.02.001

Open this paper in CoChat — free account

Abstract

Polycaprolactone (PCL), extensively known as a biomaterial, is the subject of this paper. Knowing well that some biomaterial applications exhibit specific chain organization, we focused our study on the orientation of PCL chains when this polymer is adsorbed (spin-coated) on inert substrates such as gold-coated glass slides. The main technique allowing adsorbed thin films analysis that we chose is polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS), which permits qualitative and quantitative determination of chain anisotropy in the confined layers at the interface. Based on our spectroscopic results, we achieved an adsorption model of PCL chains and we calculated orientation angles with respect to the substrate normal. Calculated values show a quasi-perpendicular deposition of PCL chains on the gold substrate. Moreover, PCL thin films remain highly crystalline, a fact which could be the basis of the important anisotropy of PCL chains.

Integrity signals

Registry

Crossref · 10.1016/j.jcis.2004.02.001

Cites

24 of 24 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Infrared spectra of complex molecules
Eggers, D. F. (1959) · Journal of Chemical Education · doi:10.1021/ed036p366.4 · Cited by 3,057
Infrared characteristic group frequencies
Goldstein, M. (1981) · Endeavour · doi:10.1016/0160-9327(81)90159-9 · Cited by 2,632
Infrared characteristic group frequencies
Socrates, G. (1980) · Medical Entomology and Zoology · Cited by 2,527
A novel degradable polycaprolactone networks for tissue engineering
Kweon, H. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00370-8 · Cited by 694
Spontaneously organized molecular assemblies. 2. Quantitative infrared spectroscopic determination of equilibrium structures of solution-adsorbed n-alkanoic acids on an oxidized aluminum surface
Allara, D. L., & Nuzzo, R. G. (1985) · Langmuir · doi:10.1021/la00061a008 · Cited by 691
Infrared and raman spectroscopy: Methods and applications
(1996) · Journal of Molecular Structure · doi:10.1016/0022-2860(96)88418-3 · Cited by 467
Anisotropic orientation in molecular monolayers by infrared spectroscopy
Rabolt, J. F., Burns, F. C., Schlotter, N. E., & Swalen, J. D. (1983) · The Journal of Chemical Physics · doi:10.1063/1.444799 · Cited by 353
Biodegradable blends and composites of polycaprolactone and starch derivatives
Koenig, M. F., & Huang, S. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90934-t · Cited by 336
Polarization Modulation FT-IR Spectroscopy of Surfaces and Ultra-Thin Films: Experimental Procedure and Quantitative Analysis
Buffeteau, T., Desbat, B., & Turlet, J. M. (1991) · Applied Spectroscopy · doi:10.1366/0003702914337308 · Cited by 324
Miscibility and morphology in crystalline/amorphous blends of poly(caprolactone)/poly(4-vinylphenol) as studied by DSC, FTIR, and 13 C solid state NMR
Wang, J., Cheung, M. K., & Mi, Y. (2002) · Polymer · doi:10.1016/s0032-3861(01)00673-5 · Cited by 157

Show all 24 references

Research works printed but not linked: 3

Buffeteau, 1997, Mikrochim. Acta, 14, 627
Wunderlich, 1973, vol. 3
Coleman, 1979, J. Polym. Sci. B, 17, 837

Sorted by citations

Items 501–600 of 813

Encapsulation of nitrogen fertilizers in mixtures with organoclays for controlled release
Silva, I. A., Silva, D. S., Sousa, M. U., Menezes, R. R., Ferreira, H. S., & Neves, G. D. A. (2020) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-020-01967-z · Cited by 11
Long-term anticoagulation and selective cells adhesion surface via combination of covalent grafting and layer by layer assembly
Li, C., Mao, J., Li, Q., Wang, F., Jiao, Y., Zhang, Z., Guidoin, R., & Wang, L. (2019) · Biomedical Materials · doi:10.1088/1748-605x/ab452b · Cited by 11
Influence of semi‐crystalline poly(ε‐caprolactone) and non‐crystalline polylactide blocks on the thermal properties of polydimethylsiloxane‐based block copolymers
Brogly, M., Bistac, S., Delaite, C., & Alzina, C. (2020) · Polymer International · doi:10.1002/pi.5964 · Cited by 10
Self-citation
Uridine-Loaded Polycaprolactone Nanofiber Mats as a Novel Wound Dressing
MERGEN, H. Ş., Gebizli, Ş. D., Ermiş, E., Cansev, M., Dokuzoglu, S. I., & Göktalay, G. (2024) · Fibers and Polymers · doi:10.1007/s12221-024-00615-3 · Cited by 12
Multifunctional hernia repair biopatch: Development, characterization, in vitro and in vivo evaluation
Deveci, M. Z. Y., Enguven, G., Eğe, H., Alakuş, İ., Ağtürk, G., Dal, F., Yilmaz, S., Kırgız, Ö., Akçakavak, G., Kazak, F., et al. (2024) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2024.106132 · Cited by 10
Electrospun poly(ε‐caprolactone)/poly(glycerol sebacate) aligned fibers fabricated with benign solvents for tendon tissue engineering
Iorio, F., Khatib, M. E., Wöltinger, N., Turriani, M., Giacinto, O. D., Mauro, A., Russo, V., Barboni, B., & Boccaccini, A. R. (2024) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37794 · Cited by 12
The additive manufacturing NiTi alloy surface modification scheme can be used for photothermal treatment and overcoming implant infection
Yang, Y., Xu, Z., Sha, P., Li, P., Yu, Z., Guo, Y., Yu, Z., Zhang, Z., & Ren, L. (2025) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-025-01326-w · Cited by 10
Phase-Inversion In Situ Systems: Problems and Prospects of Biomedical Application
Бахрушина, Е. О., Titova, S. A., Sakharova, P. S., Plakhotnaya, O. N., Grikh, V. V., Patalova, A. R., Gorbacheva, A. V., Krasnyuk, I. I., & Krasnyuk, I. I. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17060750 · Cited by 10
Effect of composite coating with poly-dopamine/PCL on the corrosion resistance of magnesium
Choi, J.-B., Jang, Y. S., Byeon, S.-M., Jang, J., Kim, Y., Bae, T., & Lee, M. (2018) · International Journal of Polymeric Materials · doi:10.1080/00914037.2018.1455678 · Cited by 10
Development of polycaprolactone biodegradable films reinforced with silver‐doped organoclay and effect on the microbiological quality of ground beef meat
İlaslan, K., Törnük, F., & Durak, M. Z. (2022) · Journal of Food Processing and Preservation · doi:10.1111/jfpp.16862 · Cited by 10
Evaluation of Human Osteoblasts on NIPS Micro-Patterned PCL Carriers Containing Nanohydroxyapatite and Reduced Graphene Oxide Using PSµM
Tüzün-Antepli, B., Şeker, Ş., Elçin, A. E., Khang, G., & Elçin, Y. M. (2022) · Molecules · doi:10.3390/molecules27207091 · Cited by 10
Solvent-free ring-opening polymerization of ε-caprolactone initiated by Mg(II), Sn(II), Zn(II), Al(III), and Sn(IV) derivatives: a comparative study
Limwanich, W., Rakbamrung, N., Meepowpan, P., Funfuenha, W., Kongsuk, J., & Punyodom, W. (2023) · Reaction Kinetics Mechanisms and Catalysis · doi:10.1007/s11144-023-02354-7 · Cited by 10
High‐throughput fabrication, structural characterization, and cellular interaction of compositionally diverse fish gelatin/polycaprolactone ( PCL ) nanofibrous materials
Lacy, H. A., Jenčová, V., HAUZEROVÁ, Š., & Stanishevsky, A. V. (2023) · Journal of Applied Polymer Science · doi:10.1002/app.54376 · Cited by 10
Development of Polycaprolactone/Poly(Vinyl Alcohol)/Clay Microparticles by Spray Drying
Monteiro, M. S. D. S. D. B., Rodrigues, C. L., Miguez, E. C., & Tavares, M. I. B. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.710048 · Cited by 10
Development of nano-tricalcium phosphate/polycaprolactone/platelet-rich plasma biocomposite for bone defect regeneration
Wang, F., Guo, Y., Lv, R., Xu, W., & Wang, W. (2020) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2020.07.021 · Cited by 10
Ultrathin single and multiple layer electrospun fibrous membranes of polycaprolactone and polysaccharides
Rodríguez-Sánchez, I. J., Vergara-Villa, N. F., Clavijo‐Grimaldo, D., Fuenmayor, C. A., & Zuluaga‐Domínguez, C. M. (2020) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911520944422 · Cited by 11
Nanostructural organization of thin films prepared by sequential dip-coating deposition of poly(butylene succinate), poly(ε-caprolactone) and their copolyesters (PBS-ran-PCL)
Peñas, M. I., Ocando, C., Penott-Chang, E. K., Safari, M., Ezquerra, T. A., Rebollar, E., Nogales, A., Hernández, R., & Müller, A. J. (2021) · Polymer · doi:10.1016/j.polymer.2021.123812 · Cited by 10
Fabrication and characterization of a semi-rigid shell barrier system made of polycaprolactone and biphasic calcium phosphate: A novel barrier system for bone regeneration
Tunthasen, R., Pripatnanont, P., & Meesane, J. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104841 · Cited by 10
Low-Energy Plasma Spray (LEPS) Deposition of Hydroxyapatite/Poly-ε-Caprolactone Biocomposite Coatings
Garcia‐Alonso, D., Parco, M., Stokes, J. T., & Looney, L. (2011) · Journal of Thermal Spray Technology · doi:10.1007/s11666-011-9695-0 · Cited by 10
Ultrasound-Assisted Enzymatic Synthesis of Poly-ε-Caprolactone: Kinetic Behavior and ReactorDesign
Gumel, A. M., Annuar, M. S. M., & Yusuf Chisti, B. (2014) · International Journal of Chemical Reactor Engineering · doi:10.1515/ijcre-2013-0115 · Cited by 10
Electrospun nanofibrous membranes for solid‐phase extraction of estriol from aqueous solution
Nectoux, A. D. S., Medeiros, L. F., Bussamara, R., Soares, R. M. D., & Fernandes, A. N. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47189 · Cited by 10
Layered Double Hydroxides as Nano Additives in Poly(ϵ-caprolactone)
Manhique, A., Focke, W. W., Leuteritz, A., & Madivate, C. (2012) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421406.2012.635925 · Cited by 10
Natural bone inspired core–shell triple-layered gel/PCL/gel 3D printed scaffolds for bone tissue engineering
Gupta, D., Singh, A. K., & Bellare, J. R. (2023) · Biomedical Materials · doi:10.1088/1748-605x/ad06c2 · Cited by 9
Morphological Evolution and Structural Orientation of Poly(ε-caprolactone)/Poly(lactic acid) Biodegradable Blend Films under Complex Coupling Flow
Wang, Y., Li, G., Zhu, H., Wan, Z., Zhang, X., Ma, Y., & Xie, L. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c00133 · Cited by 9
Comparative analysis of solvent-based and solvent-free (melting) methods for fabricating 3D-printed polycaprolactone-hydroxyapatite composite bone scaffolds: physicochemical/mechanical analyses and in vitro cytocompatibility
Vega, B. D., Dutta, A., Mumtaz, A. M., Schroeder, B. C., Gerrand, C., Boyd, A. S., & Kalaskar, D. M. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1473777 · Cited by 9
Wet-electrospun porous freeform scaffold enhances colonisation of cells
Wang, H., Xu, X., Qin, Y., Chen, H., Wang, Y., Turner, J., Zhang, J., Tamaddon, M., Zhou, F., Williams, G. R., et al. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101997 · Cited by 9
Effect of post-drawing and tension on enzymatic degradation of electrospun polycaprolactone nanofibers
Brennan, D. A., Flamini, M. D., Posselt, J. D., Wagner, C. T., & Beachley, V. Z. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104990 · Cited by 9
Biodegradability of Poly (Ɛ-Caprolactone) Modified Wood by Decaying Fungi
Tomak, E. D., Can, A., & Ermeydan, M. A. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02839-5 · Cited by 9
Development of biomimetic co-culture and tri-culture models to mimic the complex structure of the alveolar-capillary barrier
Licciardello, M., Sgarminato, V., Ciardelli, G., & Tonda‐Turo, C. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213620 · Cited by 9
Melissa officinalis essential oil loaded polycaprolactone membranes: evaluation of antimicrobial activities and cytocompatibility for tissue engineering applications
İyigündoğdu, Z., Petek, B. S., Yurtsever, M. Ç., & Ceylan, S. (2023) · Biomedical Materials · doi:10.1088/1748-605x/acfc9d · Cited by 9
Rapid attainment of full wettability through surface PEGylation of hydrophobic polyvinylidene fluoride membranes via spray-coating for enhanced anti-biofouling performances
Venault, A., Wu, Y., Maggay, I. V., & Chang, Y. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.127917 · Cited by 9
Development, characterization, and in vitro assessment of multilayer mucoadhesive system containing dexamethasone sodium phosphate
Pérez-González, G. L., Villarreal-Gómez, L. J., Olivas, A., Valdez, R., & Cornejo‐Bravo, J. M. (2020) · International Journal of Polymeric Materials · doi:10.1080/00914037.2020.1798433 · Cited by 9
Preparation and Characterization of Poly( l -lactide-co-glycolide-co-ε-caprolactone) Porous Microspheres
Zhang, C., Zhou, Z., Liu, W., Huang, T., Zhao, Y., Chen, P., Zhou, Z., Wang, D., Yi, M., & Fang, J. (2020) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2020.1847407 · Cited by 9
Development of Polycaprolactone–Zeolite Nanoporous Composite Films for Topical Therapeutic Release of Different Gasotransmitters
Pinto, R. V., Carvalho, S., Antunes, F., Pires, J., & Pinto, M. L. (2022) · ACS Applied Nano Materials · doi:10.1021/acsanm.2c01591 · Cited by 9
Nano-fluorcanasite-fluorapatite Reinforced Poly-ε-caprolactone Based Biomimetic Scaffold: A Synergistic Approach Towards Generation of Conducive Environment for Cell Survival
Kumawat, V. S., Saini, R. K., Agrawal, A. K., Khare, D., Dubey, A. K., Ghosh, S. B., & Bandyopadhyay‐Ghosh, S. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02977-w · Cited by 9
Repetitive Gly-Leu-Lys-Gly-Glu-Asn-Arg-Gly-Asp Peptide Derived from Collagen and Fibronectin for Improving Cell–Scaffold Interaction
Chaisri, P., Chingsungnoen, A., & Siri, S. (2014) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-014-1388-y · Cited by 9
Synthesis and characterization of polycyanurate networks modified by oligo(ϵ‐caprolactone) as precursors of porous thermosets
Fainleib, A. M., Grigoryeva, О., Garda, M., Saiter, J., Laupretre, F., Lorthioir, C., & Grande, D. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27039 · Cited by 9
Comportamento reológico do Bio-PE e do PCL na presença do PEgAA e PEgMA
Bezerra, E. B., França, D. C., Morais, D. D. D. S., Ferreira, E. D. S. B., Araújo, E. M., & Wellen, R. M. R. (2017) · Matéria (Rio de Janeiro) · doi:10.1590/s1517-707620170001.0130 · Cited by 9
Core-shell Nanofibers of Silk Fibroin/Polycaprolactone-Clindamycin: Study on Nanofibers Structure and Controlled Release Behavior
Tanha, N. R., & Nouri, M. (2019) · Polymer Science Series A · doi:10.1134/s0965545x19010085 · Cited by 9
Coaxial Electrospun Fibermat of Poly(AM/DAAM)/ADH and PCL: Versatile Platform for Functioning Active Enzymes
Tanikawa, Y., Ido, Y., Ando, R., Obata, A., Nagata, K., Kasuga, T., & Mizuno, T. (2020) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.20200131 · Cited by 9
In vitro and in vivo study of aspirin loaded, electrospun polycaprolactone–maltodextrin membrane for enhanced skin tissue regeneration
Movahedi, M., Salehi, A. O. M., Moezi, D., & Yarahmadian, R. (2021) · International Journal of Polymeric Materials · doi:10.1080/00914037.2021.1962877 · Cited by 9
Activation of the TrkA/Ras-MAPK/ERK Signaling Pathway via Carbon Quantum Dot Mimetics for Enhanced Peripheral Nerve Regeneration
Hasanpour, F., Zahri, S., Abdolmaleki, A., & Asadi, A. (2025) · Neurochemical Research · doi:10.1007/s11064-025-04470-3 · Cited by 8
Evaluation of Medical-Grade Polycaprolactone for 3D Printing: Mechanical, Chemical, and Biodegradation Characteristics
Kim, E. C., Kim, J.-S., Yu, Y. J., Yu, S.-G., Lee, D.-Y., Lee, D.-M., Gwak, S., Seo, K. D., & Lee, S.-J. (2025) · Polymers · doi:10.3390/polym17202730 · Cited by 8
A study of the electrophoretic deposition of polycaprolactone-chitosan-bioglass nanocomposite coating on stainless steel (316L) substrates
Sadeghinia, Z., Emadi, R., & Shamoradi, F. (2021) · Journal of Bioactive and Compatible Polymers · doi:10.1177/08839115211063506 · Cited by 8
Microfluidic-Assisted Formulation of ε-Polycaprolactone Nanoparticles and Evaluation of Their Properties and In Vitro Cell Uptake
Rybak, E., Kowalczyk, P., Czarnocka‐Śniadała, S., Wojasiński, M., Trzciński, J., & Ciach, T. (2023) · Polymers · doi:10.3390/polym15224375 · Cited by 8
Simultaneous improvement of tensile strength and toughness of polylactic acid by incorporating a biodegradable core‐shell nanofiller with double polymer layers
Gao, Y., Peng, Z., Deng, T., Zhang, L., & Li, C. (2024) · Polymer Composites · doi:10.1002/pc.28658 · Cited by 8
Crystallizability of poly(ɛ-caprolactone) blends with poly(vinylphenol) under different conditions
Yang, T.-B., Sun, X., Ren, Z., Li, H., & Yan, S. (2014) · Chinese Journal of Polymer Science · doi:10.1007/s10118-014-1492-z · Cited by 8
Designing biomaterials based on biomineralization for bone repair and regeneration
Leonor, I. B., Rodrigues, A. I., & Reis, R. L. (2016) · Elsevier eBooks · doi:10.1016/b978-1-78242-338-6.00014-4 · Cited by 8
Tuning the release of the pineal hormone melatonin via poly(ε-caprolactone)-based copolymers matrix tablets
Vlachou, M., Siamidi, A., Anagnostopoulou, D., Protopapa, C., Christodoulou, E., Malletzidou, L., Delli, E., Siamidis, I., & Bikiaris, N. D. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.104051 · Cited by 8
Degradation and Mechanical Behavior of Fish Gelatin/Polycaprolactone AC Electrospun Nanofibrous Meshes
Lacy, H. A., Nealy, S. L., & Stanishevsky, A. V. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300106 · Cited by 8
Optimized lipopolymers with curcumin to enhance AZD5582 and GDC0152 activity and downregulate inhibitors of apoptosis proteins in glioblastoma multiforme
Kuo, Y., Yen, M.-H., De, S., Rajesh, R., & Tai, C.-K. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213639 · Cited by 8
Polarization Modulation-Infrared Reflection Absorption Spectroscopic Mapping
Steiner, G. R., Šablinskas, V., Kitsche, M., & Salzer, R. (2006) · Analytical Chemistry · doi:10.1021/ac050481a · Cited by 8
Temperature-dependent IR-transition moment orientational analysis applied to thin supported films of poly-ε-caprolactone
Kossack, W., Schulz, M., Thurn‐Albrecht, T., Reinmuth, J., Skokow, V., & Kremer, F. (2017) · Soft Matter · doi:10.1039/c7sm01988b · Cited by 8
Microparticles of Lamivudine—Poly-ε-Caprolactone Conjugate for Drug Delivery via Internalization by Macrophages
Urbaniak, T., Machová, D., Janoušková, O., & Musiał, W. (2019) · Molecules · doi:10.3390/molecules24040723 · Cited by 8
Recapitulating pathophysiology of skeletal muscle diseases in vitro using primary mouse myoblasts on a nanofibrous platform
Jain, A., Behera, M., Ravi, V., Mishra, S., Sundaresan, N. R., & Chatterjee, K. (2020) · Nanomedicine Nanotechnology Biology and Medicine · doi:10.1016/j.nano.2020.102341 · Cited by 8
Polymers from Fatty Acids: Poly(ω-hydroxyl tetradecanoic acid) Synthesis and Physico-Mechanical Studies
Liu, C., Liu, F., Cai, J., Xie, W., Long, T. E., Turner, S. R., Lyons, A. M., & Gross, R. A. (2012) · ACS symposium series · doi:10.1021/bk-2012-1105.ch009 · Cited by 9
Formulation, Development, and Characterization of AMB-Based Subcutaneous Implants using PCL and PLGA via Hot-Melt Extrusion
Chitnis, K., Narala, N., Vemula, S. K., Narala, S., Munnangi, S. R., & Repka, M. A. (2024) · AAPS PharmSciTech · doi:10.1208/s12249-024-03004-4 · Cited by 7
Personalized drug-loaded 3D-printed scaffolds for periodontal bone repair: Structural, mechanical, and controlled release properties
Pantazos, I., Kapourani, A., Chortis, A. G., Cholevas, C., Verykokou, S., Ioannidis, C., Katakalos, K. V., & Barmpalexis, P. (2025) · Journal of Pharmaceutical Sciences · doi:10.1016/j.xphs.2025.103807 · Cited by 7
High Thermoelectric Performance Carbon Nanotube/Polycaprolactone Composites for Sustainable Energy Harvesting
Liu, S., Li, H., Wang, H., Kong, J., Koh, J. J., & He, C. (2025) · Small · doi:10.1002/smll.202506983 · Cited by 7
An enhanced continuous one-way rotation multi-layered triboelectric nanogenerator with high power density for exploiting ocean wave energy
Han, J., Liu, Y., Liu, S., Jiang, Y., Jiang, T., & Wang, Z. L. (2025) · Nano Research · doi:10.26599/nr.2025.94908160 · Cited by 7
In Silico Study of Novel Cyclodextrin Inclusion Complexes of Polycaprolactone and Its Correlation with Skin Regeneration
Escobedo-González, R. G., Moyers-Montoya, E. D., Perez, C. A., García‐Casillas, P. E., Miranda, R., & Nicolás‐Vázquez, M. I. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24108932 · Cited by 7
Hybrid Nano-Micro Scaffolds for Cartilage Tissue Engineering: Integrating PCL-DWJM-MWCNTs on Chemically Modified Silk Fibroin
Zadehnajar, P., Akbari, B., Karbasi, S., & Mirmusavi, M. H. (2025) · Journal of Polymers and the Environment · doi:10.1007/s10924-025-03534-3 · Cited by 7
Structural, thermal, and electrical studies on gel polymer electrolytes containing 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide
Sownthari, K., & Suthanthiraraj, S. A. (2014) · Ionics · doi:10.1007/s11581-014-1324-8 · Cited by 7
Preparation and Characterization of Electrospun PCL/Silk Fibroin Scaffolds
Bajsić, E. G., Grgurić, T. H., Mijović, B., Zimić, I. V., Dolenec, T., Kuzmić, S., Mrkonjić, N., Trcin, M. T., Slivac, I., & Zdraveva, E. (2021) · Chemical and Biochemical Engineering Quarterly · doi:10.15255/cabeq.2020.1834 · Cited by 7
Cold Atmosphere Plasma Modification on Beta-Carotene-Loaded Nanofibers to Enhance Osteogenic Differentiation
Moradi, Y., Atyabi, S. A., Ghiassadin, A., Bakhshi, H., Irani, S., Atyabi, S. M., & Dadgar, N. (2021) · Fibers and Polymers · doi:10.1007/s12221-021-0033-y · Cited by 10
Biomimicking tendon by electrospinning tissue‐derived decellularized extracellular matrix for tendon tissue engineering
Ruhela, A., Bhatt, A., Rath, S. N., & Sharma, C. S. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.53368 · Cited by 7
Silymarin-loaded electrospun polycaprolactone nanofibers as wound dressing
Sali, A., Gebizli, Ş. D., & Göktalay, G. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-00959-1 · Cited by 7
Optimization of whole-cell bacterial bioreporter immobilization on electrospun cellulose acetate (CA) and polycaprolactone (PCL) fibers for arsenic detection
Arik, N., Elçin, E., Tezcaner, A., & Öktem, H. A. (2023) · Environmental Monitoring and Assessment · doi:10.1007/s10661-023-11227-4 · Cited by 7
Advantages of FDM and gamma irradiation to manufacture personalized medical devices for airway obstructions
Aráoz, B., Bellía-Munzón, G., Bousquet, J. I., & Hermida, É. B. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1148295 · Cited by 7
Deposition of Polymer Thin Film Using an Atmospheric Pressure Micro-Plasma Driven by Dual-Frequency Excitation
Wang, X., Yuan, Q., Zhou, Y., Yin, G., & Dong, C. (2014) · Plasma Science and Technology · doi:10.1088/1009-0630/16/1/15 · Cited by 7
Microfabrication of gelatin–polycaprolactone composites for customized drug delivery
Kanungo, I., Chellappa, N., & Fathima, N. N. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.01.058 · Cited by 7
Effect of testosterone incorporation on cell proliferation and differentiation for polymer–bioceramic composites
da Costa, K. J. R., Passos, J. J., Gomes, A. D. M., Sinisterra, R. D., Lanza, C. R. M., & Cortés, M. E. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4733-0 · Cited by 7
Correlations of crystal shape and lateral orientation in bioinspired CaCO 3 mineralization
Liu, M.-F., Lu, Z., Zhang, Z., Xiao, C., Li, M., Huang, Y., Liu, X. Y., & Jiang, Y. Y. (2018) · CrystEngComm · doi:10.1039/c8ce00491a · Cited by 7
Polymorphism and crystallization in poly(vinylidene fluoride)/ poly(ϵ‐caprolactone)–block–poly(dimethylsiloxane)–block–poly(ϵ‐caprolactone) blends
Seraji, S. M., & Guo, Q. (2019) · Polymer International · doi:10.1002/pi.5933 · Cited by 7
Influence of the Solidification Process on the Mechanical Properties of Solid-State Drawn PCL/Sepiolite Nanocomposite Tapes
Eriksson, M., Goossens, H., & Peijs, T. (2020) · Fibers · doi:10.3390/fib8110070 · Cited by 7
Self‐Assembled Star‐Shaped sPCL–PEG Copolymer Nanomicelles with pH‐Sensitivity for Anticancer Drug Delivery
Li, H., Cheng, Z., Wang, Y., Zhou, D., Su, M., Wang, X., He, P., & Zhang, Y. (2020) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202000379 · Cited by 7
Encapsulation of Nerol Oil in Polycaprolactone Polymer and Stability Evaluation
Fagundes, P., Carniel, T. K., Hall, M. C., Colpani, G. L., Silva, L. L., Zanetti, M., de Mello, J. M. M., Dalcanton, F., & Fiori, M. A. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02176-5 · Cited by 7
Molecular docking studies of YKT tripeptide and drug delivery system with poly(ε‐caprolactone) nanoparticles
Bıçak, B., Kecel‐Gunduz, S., Budama‐Kilinc, Y., & Özdemir, B. (2022) · Archiv der Pharmazie · doi:10.1002/ardp.202100437 · Cited by 7
Infrared Polarimetry: Anisotropy of Polymer Nanofibers
Hinrichs, K., Blevins, B., Furchner, A., Yadavalli, N. S., & Minko, S. (2022) · Micro and Nano Engineering · doi:10.1016/j.mne.2022.100116 · Cited by 7
Polycaprolactone/Chlorophyllin Sodium Copper Salt Nanofibrous Mats Prepared by Electrospinning for Soft Tissue Engineering
Zulkifli, M. Z. A., Kamarudin, N. H. N., & Nordin, D. (2019) · Jurnal Kejuruteraan · doi:10.17576/jkukm-2019-si2(1)-09 · Cited by 7
Differentiation Capacity of Monocyte-Derived Multipotential Cells on Nanocomposite Poly(e-caprolactone)-Based Thin Films
Koliakou, I. G., Gounari, E., Nerantzaki, M., Pavlidou, E., Bikiaris, D. Ν., Kaloyianni, M. G., & Koliakos, G. (2019) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-019-00185-z · Cited by 7
Surface‐induced Polymer Crystallization
Sun, X., & Yan, S. (2016) · Wiley eBooks · doi:10.1002/9781118892756.ch12 · Cited by 7
Inhibition of Enzyme and Bacteria Activities in Diabetic Ulcer-like Scenarios via WAAPV-Loaded Electrospun Fibers
Ribeiro, A. R. M., Miranda, C. S., da Silva, A. F. G., Mendes, F. D. P., Silva, B., Oliveira, B. A. S., Paiva, E. D., Gonçalves, S. P., Lima, S. M. M. A. P., Costa, S. P. G., et al. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16070911 · Cited by 6
Thermal, Molecular Dynamics, and Mechanical Properties of Poly(Ethylene Furanoate)/Poly(ε-Caprolactone) Block Copolymers
Stanley, J., Klonos, P. Α., Teknetzi, A., Rekounas, N., Kyritsis, A., Zemljič, L. F., Lambropoulou, D. A., & Bikiaris, D. Ν. (2024) · Molecules · doi:10.3390/molecules29245943 · Cited by 6
Polycaprolactone/sodium alginate coaxial wet-spun fibers modified with carbon nanofibers and ceftazidime for improved clotting and infection control in wounds
Marinho, E. R., Silva, B., Miranda, C. S., Pinho, S. L. C., & Felgueiras, H. P. (2025) · Biomaterials Science · doi:10.1039/d4bm01667j · Cited by 6
Sustainable poly-ε-caprolactone-based nanocomposite polymer electrolytes with SnO2 nanofiller for next generation solid-state zinc-ion batteries
Suresh, B., Thirumoorthy, M. S., Pandian, M. K., Mareeswaran, V., Ponnaiah, A., Samuel, A. S., & Bhagavathiachari, M. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.238020 · Cited by 6
Recyclable near-body temperature eutectic system with double positive temperature coefficient effect for personalised thermal regulation
Guo, H., Lu, L., Zhao, K., Yang, H., Willcock, H., Mele, E., Bao, X., Yu, E. H., Zhang, H., & Liu, Y. (2025) · Materials Horizons · doi:10.1039/d5mh01491c · Cited by 6
Itraconazole-Loaded Polycaprolactone Nanoparticle Gel for Enhanced Transdermal Delivery: Development, Characterization, and ex vivo Evaluation
Hussain, S., Malik, N. S., Tulain, U. R., Erum, A., Mahmood, A., Akram, S., Javaid, A., Jabeen, A., Shao, C., Wang, S., et al. (2025) · International Journal of Nanomedicine · doi:10.2147/ijn.s560741 · Cited by 6
Mesoporous silica nanoparticles accommodating electrospun nanofibers as implantable local drug delivery system processed by cold atmospheric plasma and spin coating approaches
Erdoğan, N., Karaman, D. Ş., Yıldız, Ö., Özdemir, G. D., & Ercan, U. K. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad1bb1 · Cited by 6
Equisetum arvense and nano zinc oxide‐infused polycaprolactone scaffolds: A multifaceted approach for antibacterial, antioxidant, and hemocompatible wound dressing
Chinijani, T. H., Afza, S., Yousefiasl, S., Manoochehri, H., Pourmotabed, S., Arabestani, M. R., Makvandi, P., Sharifi, E., & Esfahani, H. (2024) · Polymer Engineering and Science · doi:10.1002/pen.26754 · Cited by 6
Electrospun nonwoven fabric of poly(ε-caprolactone)/n-phosphonium chitosan for antiviral applications: Fabrication, characterization, and potential efficacy
de Moura, C. F., Ochi, D., Calais, G. B., Neto, J. B. M. R., d’Ávila, M. A., & Beppu, M. M. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.134861 · Cited by 6
Fibrin-Polycaprolactone Scaffolds for the Differentiation of Human Neural Progenitor Cells into Dopaminergic Neurons
Ramirez, S. P., Hernandez, I., Dorado, Z. N., Loyola, C. D., Roberson, D. A., & Joddar, B. (2024) · ACS Omega · doi:10.1021/acsomega.4c03952 · Cited by 6
Effect of treatment time and radio frequency power on roughness and wettability of oxygen plasma-etched Cadmium Telluride thin films
Hasani, E. (2022) · Thin Solid Films · doi:10.1016/j.tsf.2022.139499 · Cited by 6
Natural weathering of spruce wood chemically modified by re‐used ε‐caprolactone solution
Cambazoğlu, M., Tomak, E. D., & Ermeydan, M. A. (2022) · Coloration Technology · doi:10.1111/cote.12645 · Cited by 6
Development of Novel Pharmaceutical Forms of the Marine Bioactive Pigment Echinochrome A Enabling Alternative Routes of Administration
Kikionis, S., Papakyriakopoulou, P., Mavrogiorgis, P., Васильева, Е. А., Mishchenko, N. P., Fedoreyev, S. A., Valsami, G. N., Ioannou, E., & Roussis, V. (2023) · Marine Drugs · doi:10.3390/md21040250 · Cited by 6
Development of a micro-patterned membrane consisting of a PCL/Keratin/PEGDE ternary blend using PSµM for potential biotechnological applications
Sezer, S., Tüzün-Antepli, B., Parmaksız, M., Bayramli-Öner, B., Elçin, A. E., & Elçin, Y. M. (2023) · Journal of Polymer Research · doi:10.1007/s10965-023-03671-0 · Cited by 5
Novel tri-biopolymer thin film with superior antimicrobial efficacy
Al-Goraee, A. M., Alshami, A. S., Al-Shami, A., Power, J., Guidinger, J., Buelke, C., Talukder, M. J., & Hou, X. (2023) · Journal of Materials Science · doi:10.1007/s10853-023-09132-9 · Cited by 6
Synthesis and Properties of Modified Biodegradable Polymers Based on Caprolactone
Fortună, M. E., Ungureanu, E. L., Rotaru, R., Bargan, A., Ungureanu, O. C., Brezuleanu, C. O., & Harabagiu, V. (2023) · Polymers · doi:10.3390/polym15244731 · Cited by 6
Solvent‐cast 3D printing with molecular weight polymer blends to decouple effects of scaffold architecture and mechanical properties on mesenchymal stromal cell fate
Tolbert, J. W., French, T., Kitson, A., Okpara, C., Hammerstone, D. E., Lazarte, S., Babuska, T. F., Gonzalez‐Fernandez, T., Krick, B. A., & Chow, L. W. (2024) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37674 · Cited by 6
Hydrogel‐Reactive‐Microenvironment Powering Reconfiguration of Polymer Architectures
Liu, P., Mao, Z., Zhao, Y., Yin, J., Chu, C., Chen, X., & Lü, J. (2024) · Advanced Science · doi:10.1002/advs.202307830 · Cited by 6

Authors: Elzein, T., Nasser-Eddine, M., Delaite, C., Bistac, S., & Dumas, P.
Corresponding author: Elzein, Tamara
ORCID: Elzein, Tamara
Delaite, Christelle
Bistac, Sophie
Venue: Journal of Colloid and Interface Science
Publisher: Elsevier BV
Published: 2004-05
Volume: 273
Issue: 2
Pages: 381-387
ISSN: 0021-9797 (ISSN-L)
DOI: 10.1016/j.jcis.2004.02.001
OpenAlex: W2086588103
Cited by: 814
References: 24
Citations by year: 2026: 42 · 2025: 77 · 2024: 56 · 2023: 64 · 2022: 63 · 2021: 61 · 2020: 68 · 2019: 64 · 2018: 72 · 2017: 45 · 2016: 39 · 2015: 34 · 2014: 25 · 2013: 23 · 2012: 15
FWCI: 3.38
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Colloid and Interface Science (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords: polycaprolactone, polymer chain orientation, interfacial adsorption, polymer thin films, gold substrate, spin-coated films, PM-IRRAS, crystallinity, adsorption modeling, biomaterials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

FTIR study of polycaprolactone chain organization at interfaces

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks