Cited by 814Polymer Surface Interaction Studiesbiodegradable polymer synthesis and propertiesPolymer crystallization and properties

The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.

FTIR study of polycaprolactone chain organization at interfaces

Elzein, Tamara, Nasser-Eddine, Mohamad, Delaite, Christelle, Bistac, Sophie, Dumas, Philippe·2004·Journal of Colloid and Interface Science

DOI 10.1016/j.jcis.2004.02.001

Open this paper in CoChat — free account

Abstract

Polycaprolactone (PCL), extensively known as a biomaterial, is the subject of this paper. Knowing well that some biomaterial applications exhibit specific chain organization, we focused our study on the orientation of PCL chains when this polymer is adsorbed (spin-coated) on inert substrates such as gold-coated glass slides. The main technique allowing adsorbed thin films analysis that we chose is polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS), which permits qualitative and quantitative determination of chain anisotropy in the confined layers at the interface. Based on our spectroscopic results, we achieved an adsorption model of PCL chains and we calculated orientation angles with respect to the substrate normal. Calculated values show a quasi-perpendicular deposition of PCL chains on the gold substrate. Moreover, PCL thin films remain highly crystalline, a fact which could be the basis of the important anisotropy of PCL chains.

Integrity signals

Registry

Crossref · 10.1016/j.jcis.2004.02.001

Cites

24 of 24 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Infrared spectra of complex molecules
Eggers, D. F. (1959) · Journal of Chemical Education · doi:10.1021/ed036p366.4 · Cited by 3,057
Infrared characteristic group frequencies
Goldstein, M. (1981) · Endeavour · doi:10.1016/0160-9327(81)90159-9 · Cited by 2,632
Infrared characteristic group frequencies
Socrates, G. (1980) · Medical Entomology and Zoology · Cited by 2,527
A novel degradable polycaprolactone networks for tissue engineering
Kweon, H. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00370-8 · Cited by 694
Spontaneously organized molecular assemblies. 2. Quantitative infrared spectroscopic determination of equilibrium structures of solution-adsorbed n-alkanoic acids on an oxidized aluminum surface
Allara, D. L., & Nuzzo, R. G. (1985) · Langmuir · doi:10.1021/la00061a008 · Cited by 691
Infrared and raman spectroscopy: Methods and applications
(1996) · Journal of Molecular Structure · doi:10.1016/0022-2860(96)88418-3 · Cited by 467
Anisotropic orientation in molecular monolayers by infrared spectroscopy
Rabolt, J. F., Burns, F. C., Schlotter, N. E., & Swalen, J. D. (1983) · The Journal of Chemical Physics · doi:10.1063/1.444799 · Cited by 353
Biodegradable blends and composites of polycaprolactone and starch derivatives
Koenig, M. F., & Huang, S. J. (1995) · Polymer · doi:10.1016/0032-3861(95)90934-t · Cited by 336
Polarization Modulation FT-IR Spectroscopy of Surfaces and Ultra-Thin Films: Experimental Procedure and Quantitative Analysis
Buffeteau, T., Desbat, B., & Turlet, J. M. (1991) · Applied Spectroscopy · doi:10.1366/0003702914337308 · Cited by 324
Miscibility and morphology in crystalline/amorphous blends of poly(caprolactone)/poly(4-vinylphenol) as studied by DSC, FTIR, and 13 C solid state NMR
Wang, J., Cheung, M. K., & Mi, Y. (2002) · Polymer · doi:10.1016/s0032-3861(01)00673-5 · Cited by 157

Show all 24 references

Research works printed but not linked: 3

Buffeteau, 1997, Mikrochim. Acta, 14, 627
Wunderlich, 1973, vol. 3
Coleman, 1979, J. Polym. Sci. B, 17, 837

Sorted by citations

Fabrication and cellular compatibility of aligned chitosan–PCL fibers for nerve tissue regeneration
Cooper, A., Bhattarai, N., & Zhang, M. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.02.008 · Cited by 254
Highly Retina-Permeating and Long-Acting Resveratrol/Metformin Nanotherapeutics for Enhanced Treatment of Macular Degeneration
Dung, N. D., Luo, L., Yang, C.-J., & Lai, J. (2022) · ACS Nano · doi:10.1021/acsnano.2c05824 · Cited by 219
Reclaiming graphite from spent lithium ion batteries ecologically and economically
Wang, H.-R., Huang, Y.-S., Huang, C.-F., Wang, X.-S., Wang, K., Chen, H.-B., Liu, S.-B., Wu, Y., Xu, K., & Li, W.-S. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.05.050 · Cited by 184
Crystalline Morphology of Electrospun Poly(ε-caprolactone) (PCL) Nanofibers
Wang, X., Zhao, H., Turng, L.-S., & Li, Q. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie302185e · Cited by 203
Blending Chitosan with Polycaprolactone: Effects on Physicochemical and Antibacterial Properties
Sarasam, A. R., Krishnaswamy, R., & Madihally, S. V. (2006) · Biomacromolecules · doi:10.1021/bm050935d · Cited by 202
Unidirectional Dimerization and Stacking of Ureidopyrimidinone End Groups in Polycaprolactone Supramolecular Polymers
van Beek, D. J. M., Spiering, A. J. H., Peters, G. G., Nijenhuis, K. T., & Sijbesma, R. P. (2007) · Macromolecules · doi:10.1021/ma0712394 · Cited by 200
Investigating the effect of chitosan on hydrophilicity and bioactivity of conductive electrospun composite scaffold for neural tissue engineering
Sadeghi, A., Moztarzadeh, F., & Mohandesi, J. A. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.10.022 · Cited by 195
3D Printed Polycaprolactone/Gelatin/Bacterial Cellulose/Hydroxyapatite Composite Scaffold for Bone Tissue Engineering
Cakmak, A. M., Ünal, S., Şahin, A., Oktar, F. N., Şengör, M., Ekren, N., Gündüz, O., & Kalaskar, D. M. (2020) · Polymers · doi:10.3390/polym12091962 · Cited by 162
Direct micro-patterning of biodegradable polymers using ultraviolet and femtosecond lasers
Aguilar, C. A., Lu, Y., Mao, S. S., & Chen, S. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.04.053 · Cited by 157
Incorporation of bioactive glass nanoparticles in electrospun PCL/chitosan fibers by using benign solvents
Liverani, L., Lacina, J., Roether, J. A., Boccardi, E., Killian, M. S., Schmuki, P., Schubert, D. W., & Boccaccini, A. R. (2017) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.05.003 · Cited by 147
Fabrication of 3D printed antimicrobial polycaprolactone scaffolds for tissue engineering applications
Radhakrishnan, S., Nagarajan, S., Belaid, H., Farha, C., Iatsunskyi, I., Coy, E. L., Soussan, L., Huon, V., Barés, J., Belkacemi, K., et al. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111525 · Cited by 147
Morphological and Mechanical Properties of Electrospun Polycaprolactone Scaffolds: Effect of Applied Voltage
Can‐Herrera, L. A., Oliva, A. I., Dzul-Cervantes, M. A. A., Pacheco-Salazar, O. F., & Cervantes‐Uc, J. M. (2021) · Polymers · doi:10.3390/polym13040662 · Cited by 152
Shish-Kebab-Structured Poly(ε-Caprolactone) Nanofibers Hierarchically Decorated with Chitosan–Poly(ε-Caprolactone) Copolymers for Bone Tissue Engineering
Jing, X., Mi, H., Wang, X., Peng, X., & Turng, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00900 · Cited by 145
Design and manufacture of neural tissue engineering scaffolds using hyaluronic acid and polycaprolactone nanofibers with controlled porosity
Entekhabi, E., Nazarpak, M. H., Moztarzadeh, F., & Sadeghi, A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.06.078 · Cited by 135
Fabrication of PCL/β‐TCP scaffolds by 3D mini‐screw extrusion printing
Dávila, J. L., de Freitas, M. S., Neto, P. I., Silveira, Z. D. C., da Silva, J. V. L., & d’Ávila, M. A. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43031 · Cited by 130
3D biodegradable scaffolds of polycaprolactone with silicate-containing hydroxyapatite microparticles for bone tissue engineering: high-resolution tomography and in vitro study
Shkarina, S., Shkarin, R., Weinhardt, V., Melnik, E. V., Vacun, G., Kluger, P. J., Loza, K., Epple, M., Ivlev, S. I., Baumbach, T., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-27097-7 · Cited by 131
Polymers from Fatty Acids: Poly(ω-hydroxyl tetradecanoic acid) Synthesis and Physico-Mechanical Studies
Liu, C., Liu, F., Cai, J., Xie, W., Long, T. E., Turner, S. R., Lyons, A., & Gross, R. A. (2011) · Biomacromolecules · doi:10.1021/bm2007554 · Cited by 128
Poly(glycerol sebacate urethane)–cellulose nanocomposites with water-active shape-memory effects
Wu, T., Frydrych, M., O’Kelly, K., & Chen, B. (2014) · Biomacromolecules · doi:10.1021/bm500507z · Cited by 126
Self‐Healing Shape Memory PUPCL Copolymer with High Cycle Life
Rehman, H. U., Chen, Y., Hedenqvist, M. S., Li, H., Xue, W., Guo, Y., Guo, Y., Duan, H., & Liu, H. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201704109 · Cited by 126
Interpenetrating network gelatin methacryloyl (GelMA) and pectin-g-PCL hydrogels with tunable properties for tissue engineering
Fares, M. M., Sani, E. S., Lara, R. P., Oliveira, R. B., Khademhosseini, A., & Annabi, N. (2018) · Biomaterials Science · doi:10.1039/c8bm00474a · Cited by 127
An advanced analytical approach to assess the long-term degradation of microplastics in the marine environment
Carbery, M., Sathish, C., Lakshmi, D. S., O’Connor, W. A., & Thavamani, P. (2023) · npj Materials Degradation · doi:10.1038/s41529-023-00377-y · Cited by 138
Preparation of a “sliding graft copolymer”, an organic solvent-soluble polyrotaxane containing mobile side chains, and its application for a crosslinked elastomeric supramolecular film
Araki, J., Kataoka, T., & Ito, K. (2007) · Soft Matter · doi:10.1039/b715231k · Cited by 125
Mechanical properties of short flax fibre bundle/poly(ε-caprolactone) composites: Influence of matrix modification and fibre content
Arbelaiz, A., Fernández, B., Valea, A., & Mondragòn, I. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.11.030 · Cited by 124
Polycaprolactone- and polycaprolactone/ceramic-based 3D-bioplotted porous scaffolds for bone regeneration: A comparative study
Gómez-Lizárraga, K. K., Flores-Morales, C., Prado-Audelo, M. L. D., Álvarez-Pérez, M. A., Piña-Barba, M. C., & Escobedo, C. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.05.003 · Cited by 121
Cocoa Shell Waste Biofilaments for 3D Printing Applications
Tran, T. N., Bayer, I. S., Heredia‐Guerrero, J. A., Frugone, M., Lagomarsino, M., Maggio, F., & Athanassiou, A. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700219 · Cited by 119
Highly efficient flame retardant, flexible, and strong adhesive intumescent coating on polypropylene using hyperbranched polyamide
Li, X., Zhao, Z., Wang, Y., Yan, H. X., Zhang, X., & Xu, B. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.05.037 · Cited by 117
Isolation and characterization of different promising fungi for biological waste management of polyurethanes
Magnin, A., Hoornaert, L., Pollet, É., Laurichesse, S., Phalip, V., & Avérous, L. (2018) · Microbial Biotechnology · doi:10.1111/1751-7915.13346 · Cited by 117
Biodegradation of Poly(ε-caprolactone) (PCL) Film by Alcaligenes faecalis
Khatiwala, V. K., Shekhar, N., Aggarwal, S., & Mandal, U. K. (2008) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0104-9 · Cited by 118
Hybrid nanofibers based on poly-caprolactone/gelatin/hydroxyapatite nanoparticles-loaded Doxycycline: Effective anti-tumoral and antibacterial activity
Ramírez-Agudelo, R., Scheuermann, K., Gala-García, A., Monteiro, A. P. F., Pinzón-García, A. D., Cortés, M. E., & Sinisterra, R. D. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.08.012 · Cited by 115
Coaxial and emulsion electrospinning of extracted hyaluronic acid and keratin based nanofibers for wound healing applications
Su, S., Bedir, T., Kalkandelen, C., Başar, A. O., Şaşmazel, H. T., Üstündağ, C. B., Şengör, M., & Gündüz, O. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.110158 · Cited by 110
Graphite oxide as a carbocatalyst for the preparation of fullerene-reinforced polyester and polyamide nanocomposites
Dreyer, D. R., Jarvis, K. A., Ferreira, P. J., & Bielawski, C. W. (2012) · Polymer Chemistry · doi:10.1039/c2py00545j · Cited by 109
Highly toughened polylactide with novel sliding graft copolymer by in situ reactive compatibilization, crosslinking and chain extension
Li, X., Kang, H., Shen, J., Zhang, L., Nishi, T., Ito, K., Zhao, C., & Coates, P. D. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.045 · Cited by 108
A comparative study of oregano (Origanum vulgare L.) essential oil-based polycaprolactone nanocapsules/ microspheres: Preparation, physicochemical characterization, and storage stability
Fraj, A., Jaâfar, F., Martı́, M., Coderch, L., & Ladhari, N. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111669 · Cited by 112
Electrospun polycaprolactone/silk fibroin nanofibrous bioactive scaffolds for tissue engineering applications
Nazeer, M. A., Yılgör, E., & Yılgör, İ. (2019) · Polymer · doi:10.1016/j.polymer.2019.02.023 · Cited by 105
Surface controlled biomimetic coating of polycaprolactone nanofiber meshes to be used as bone extracellular matrix analogues
Araujo, J. V., Martins, A. M., Leonor, I. B., Pinho, E. D., Reis, R. L., & Neves, N. M. (2008) · Journal of Biomaterials Science Polymer Edition · doi:10.1163/156856208786052335 · Cited by 104
Antimicrobial and biodegradable food packaging applications of polycaprolactone/organo nanoclay/chitosan polymeric composite films
Cesur, S., Köroğlu, C., & Yalçın, H. T. (2017) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21607 · Cited by 101
An in vitro and in vivo study of PCL/chitosan electrospun mat on polyurethane/propolis foam as a bilayer wound dressing
Karizmeh, M. S., Poursamar, S. A., Kefayat, A., Farahbakhsh, Z. T., & Rafienia, M. (2022) · Biomaterials Advances · doi:10.1016/j.msec.2022.112667 · Cited by 101
Preparation and characterization of starch-poly-ε-caprolactone microparticles incorporating bioactive agents for drug delivery and tissue engineering applications
Balmayor, E. R., Tuzlakoğlu, K., Azevedo, H. S., & Reis, R. L. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.11.006 · Cited by 99
3D-printed biphasic calcium phosphate scaffolds coated with an oxygen generating system for enhancing engineered tissue survival.
Touri, M., Moztarzadeh, F., Osman, N., Dehghan, M., & Mozafari, M. (2018) · Materials Science and Engineering C: Materials for Biological Applications · doi:10.1016/j.msec.2017.11.037 · Cited by 89
Alignment and composition of laminin–polycaprolactone nanofiber blends enhance peripheral nerve regeneration
Neal, R. A., Tholpady, S. S., Foley, P. L., Swami, N. S., Ogle, R. C., & Botchwey, E. A. (2011) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33204 · Cited by 98
Polymeric Nanoparticles Encapsulating White Tea Extract for Nutraceutical Application
Sanna, V., Lubinu, G., Madau, P., Pala, N., Nurra, S., Mariani, A., & Sechi, M. (2015) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf505850q · Cited by 95
Conduction and thermal properties of a proton conducting polymer electrolyte based on poly (ε-caprolactone)
Woo, H. J., Majid, S. R., & Arof, A. K. (2011) · Solid State Ionics · doi:10.1016/j.ssi.2011.07.007 · Cited by 95
Electrospun polycaprolactone/chitosan scaffolds for nerve tissue engineering: physicochemical characterization and Schwann cell biocompatibility
Bolaina-Lorenzo, E. D., Martínez‐Ramos, C., Pradas, M. M., Herrera-Kao, W. A., Cauich‐Rodríguez, J. V., & Cervantes‐Uc, J. M. (2016) · Biomedical Materials · doi:10.1088/1748-605x/12/1/015008 · Cited by 95
Fabrication and Characterization of Core-Shell Electrospun Fibrous Mats Containing Medicinal Herbs for Wound Healing and Skin Tissue Engineering
Zahedi, E., Esmaeili, A., Eslahi, N., Shokrgozar, M. A., & Simchi, A. (2019) · Marine Drugs · doi:10.3390/md17010027 · Cited by 92
Angiogenesis in Bone Regeneration: Tailored Calcium Release in Hybrid Fibrous Scaffolds
Castaño, Ó., Sachot, N., Xuriguera, E., Engel, E., Planell, J. A., Park, J.-H., Jin, G., Kim, T.-H., Kim, J.-H., & Kim, H. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am500885v · Cited by 91
Generation of PGS / PCL Blend Nanofibrous Scaffolds Mimicking Corneal Stroma Structure
Salehi, S., Fathi, M., Javanmard, S. H., Bahners, T., Gutmann, J. S., Ergün, S., Steuhl, K. P., & Fuchsluger, T. M. A. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300187 · Cited by 91
Bilayered nanofibrous 3D hierarchy as skin rudiment by emulsion electrospinning for burn wound management
Pal, P., Dadhich, P., Srivas, P. K., Das, B., Maulik, D., & Dhara, S. (2017) · Biomaterials Science · doi:10.1039/c7bm00174f · Cited by 90
Electrochemical investigations of magnesium in DMEM with biodegradable polycaprolactone coating as corrosion barrier
Degner, J., Singer, F., Cordero-Arias, L., Boccaccini, A. R., & Virtanen, S. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.05.115 · Cited by 89
Grafting polycaprolactone diol onto cellulose nanocrystals via click chemistry: Enhancing thermal stability and hydrophobic property
Zhou, L., He, H., Li, M., Huang, S., Mei, C., & Wu, Q. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.02.039 · Cited by 95
Yttrium oxide nanoparticle loaded scaffolds with enhanced cell adhesion and vascularization for tissue engineering applications
Augustine, R., Dalvi, Y. B., Nath, V., Varghese, R., Raghuveeran, V., Hasan, A., Thomas, S., & Sandhyarani, N. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.109801 · Cited by 89
Electroactive calcium-alginate/polycaprolactone/reduced graphene oxide nanohybrid hydrogels for skeletal muscle tissue engineering
Aparicio-Collado, J. L., García-San-Martín, N., Molina‐Mateo, J., Cabanilles, C. T., Quiles, V. D., Serrano‐Aroca, Á., & Serra, R. S. I. (2022) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2022.112455 · Cited by 90
Novel docetaxel-loaded nanoparticles based on PCL-Tween 80 copolymer for cancer treatment
Mei, L., Zeng, Cheng, Zheng, Z., Song, Huang, & -, M. (2011) · International Journal of Nanomedicine · doi:10.2147/ijn.s25251 · Cited by 90
Starch-hydroxyapatite composite bone scaffold fabrication utilizing a slurry extrusion-based solid freeform fabricator
Koski, C., Onuike, B., Bandyopadhyay, A. K., & Bose, S. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.08.030 · Cited by 88
Highly Compliant Vascular Grafts with Gelatin-Sheathed Coaxially Structured Nanofibers
Nagiah, N., Johnson, R., Anderson, R., Elliott, W. H., & Tan, W. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b03177 · Cited by 86
Preparation and characterization of hybrid polycaprolactone/cellulose ultrafine fibers via electrospinning
Ali, S., Khatri, Z., Oh, K. W., Kim, I. S., & Kim, S. H. (2014) · Macromolecular Research · doi:10.1007/s13233-014-2078-x · Cited by 85
New Materials for 3D-Printing Based on Polycaprolactone with Gum Rosin and Beeswax as Additives
Pavón, C., Aldás, M., López, J., & Bou, S. F. (2020) · Polymers · doi:10.3390/polym12020334 · Cited by 88
Coaxial electrospun PCL/Gelatin-MA fibers as scaffolds for vascular tissue engineering
Coimbra, P., dos Santos, P. G. P., Alves, P., Miguel, S. P., Carvalho, M. P., de Sá, K. D., Correia, I. J., & Ferreira, P. C. N. (2017) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2017.07.065 · Cited by 85
Egg shell-derived calcium phosphate/carbon dot nanofibrous scaffolds for bone tissue engineering: Fabrication and characterization
Shafiei, S., Omidi, M., Nasehi, F., Golzar, H., Mohammadrezaei, D., Rad, M. R., & Khojasteh, A. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.03.003 · Cited by 85
Enhancing Chemical Stability and Suppressing Ion Migration in CH3NH3PbI3 Perovskite Solar Cells via Direct Backbone Attachment of Polyesters on Grain Boundaries
Zhou, Y., Yin, Y., Zuo, X., Wang, L., Li, T., Zhou, Y., Padture, N. P., Yang, Z., Guo, Y., Xue, Y., et al. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c00995 · Cited by 82
Effect of UV and Gamma Irradiation Sterilization Processes in the Properties of Different Polymeric Nanoparticles for Biomedical Applications
Tapia-Guerrero, Y. S., Prado-Audelo, M. L. D., Borbolla‐Jiménez, F. V., Giraldo‐Gómez, D. M., García‐Aguirre, I., Colín‐Castro, C. A., Morales‐González, J. A., Leyva‐Gómez, G., & Magaña, J. J. (2020) · Materials · doi:10.3390/ma13051090 · Cited by 84
The green synthesis of carbon quantum dots (CQDs) and characterization of polycaprolactone (PCL/CQDs) films
Mindivan, F., & Göktaş, M. (2023) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2023.132446 · Cited by 81
Enhanced mechanical strength and biocompatibility of electrospun polycaprolactone-gelatin scaffold with surface deposited nano-hydroxyapatite
Jaiswal, A. K., Chhabra, H., Soni, V., & Bellare, J. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.02.003 · Cited by 81
Nanostructured Fibrous Membranes with Rose Spike-Like Architecture
Nasajpour, A., Mandla, S., Shree, S., Mostafavi, E., Sharifi, R., Khalilpour, A., Saghazadeh, S., Hassan, S., Mitchell, M. J., Leijten, J., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02929 · Cited by 80
Electrospun poly-caprolactone/graphene oxide/quercetin nanofibrous scaffold for wound dressing: Evaluation of biological and structural properties
Faraji, S., Nowroozi, N., Nouralishahi, A., & Shayeh, J. S. (2020) · Life Sciences · doi:10.1016/j.lfs.2020.118062 · Cited by 80
3D Printed High‐Strength Supramolecular Polymer Hydrogel‐Cushioned Radially and Circumferentially Oriented Meniscus Substitute
Zhang, Q., Xu, Z., Zhang, X., Liu, C., Yang, R., Sun, Y., Zhang, Y., & Liu, W. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202200360 · Cited by 80
Nano/Micro Hybrid Scaffold of PCL or P3HB Nanofibers Combined with Silk Fibroin for Tendon and Ligament Tissue Engineering
Naghashzargar, E., Farè, S., Catto, V., Bertoldi, S., Semnani, D., Karbasi, S., & Tanzi, M. C. (2015) · Journal of Applied Biomaterials & Functional Materials · doi:10.5301/jabfm.5000216 · Cited by 81
Fabrication and characterisation of melt-extruded chitosan/keratin/PCL/PEG drug-eluting sutures designed for wound healing
Deng, X., Gould, M. L., & Ali, M. A. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111696 · Cited by 79
Fabrication and in vitro evaluation of 3D composite scaffold based on collagen/hyaluronic acid sponge and electrospun polycaprolactone nanofibers for peripheral nerve regeneration
Entekhabi, E., Nazarpak, M. H., Shafieian, M., Mohammadi, H., Firouzi, M., & Hassannejad, Z. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37023 · Cited by 78
Tuning Size Scale and Crystallinity of PCL Electrospun Fibres via Solvent Permittivity to Address hMSC Response
Guarino, V., Cirillo, V., Taddei, P., Álvarez-Pérez, M. A., & Ambrosio, L. (2011) · Macromolecular Bioscience · doi:10.1002/mabi.201100204 · Cited by 78
Synthesis of magnesium phosphate nanoflakes and its PCL composite electrospun nanofiber scaffolds for bone tissue regeneration
Perumal, G., Sivakumar, P. M., Nandkumar, A. M., & Doble, M. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110527 · Cited by 77
Surface-Induced Anisotropic Chain Ordering of Polycarprolactone on Oriented Polyethylene Substrate: Epitaxy and Soft Epitaxy
Yan, C., Li, H., Zhang, J., Ozaki, Y., Shen, D., Yan, D., Shi, A., & Yan, S. (2006) · Macromolecules · doi:10.1021/ma061188v · Cited by 77
Biodegradable nanocomposites developed from PLA/PCL blends and silk fibroin nanoparticles: Study on the microstructure, thermal behavior, crystallinity and performance
Dadras Chomachayi, M., Jalali-arani, A., Beltrán, F. R., de la Orden, M. U., & Martínez Urreaga, J. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01684-0 · Cited by 76
Mechanical, material, and biological study of a PCL/bioactive glass bone scaffold: Importance of viscoelasticity
Shahin‐Shamsabadi, A., Hashemi, A., Tahriri, M., Bastami, F., Salehi, M., & Abbas, F. M. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.04.080 · Cited by 76
In situ bone regeneration with sequential delivery of aptamer and BMP2 from an ECM-based scaffold fabricated by cryogenic free-form extrusion
Sun, T., Meng, C., Ding, Q., Yu, K., Zhang, X., Zhang, W., Tian, W., Zhang, Q., Guo, X., Wu, B., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.04.013 · Cited by 76
Kinetic Release Studies of Antibiotic Patches for Local Transdermal Delivery
Altun, E., Yuca, E., Ekren, N., Kalaskar, D. M., Ficai, D., Dolete, G., Ficai, A., & Gündüz, O. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13050613 · Cited by 81
Biodegradation of blend films PVA/PVC, PVA/PCL in soil and soil with landfill leachate
de Campos, A., Marconato, J. C., & Martins-Franchetti, S. M. (2011) · Brazilian Archives of Biology and Technology · doi:10.1590/s1516-89132011000600024 · Cited by 75
Improvement of properties of glycerol plasticized starch films by blending with a low ratio of polycaprolactone and/or polyethylene glycol
Ortega‐Toro, R., Muñoz, A., Talens, P., & Chiralt, A. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.11.029 · Cited by 75
Non-mulberry silk fibroin grafted PCL nanofibrous scaffold: Promising ECM for bone tissue engineering
Bhattacharjee, P., Naskar, D., Kim, H., Maiti, T. K., Bhattacharya, D., & Kundu, S. C. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.08.025 · Cited by 74
Surface modification of electrospun polycaprolactone microfibers by air plasma treatment: Effect of plasma power and treatment time
Can‐Herrera, L. A., Ávila‐Ortega, A., la Rosa‐García, S. D., Oliva, A. I., Cauich-Rodríguez, J. V., & Cervantes‐Uc, J. M. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.060 · Cited by 74
Polycaprolactone Based Nanoparticles Loaded with Indomethacin for Anti-Inflammatory Therapy: From Preparation to Ex Vivo Study
Badri, W., Miladi, K., Robin, S., Viennet, C., Nazari, Q. A., Agusti, G., Fessi, H., & Elaı̈ssari, A. (2017) · Pharmaceutical Research · doi:10.1007/s11095-017-2166-7 · Cited by 74
3D Reduced Graphene Oxide Scaffolds with a Combinatorial Fibrous-Porous Architecture for Neural Tissue Engineering
Girão, A. F., Sousa, J. P. M., Domínguez-Bajo, A., González‐Mayorga, A., Bdikin, I. K., Pujades, E., Casañ-Pastor, N., Hortigüela, M. J., Otero‐Irurueta, G., Completo, A., et al. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c10599 · Cited by 73
Hardystonite improves biocompatibility and strength of electrospun polycaprolactone nanofibers over hydroxyapatite: A comparative study
Jaiswal, A. K., Chhabra, H., Kadam, S. S., Londhe, K., Soni, V., & Bellare, J. R. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.03.020 · Cited by 73
Electrospun poly(ε-caprolactone)/Ca-deficient hydroxyapatite nanohybrids: Microstructure, mechanical properties and cell response by murine embryonic stem cells
Bianco, A., Federico, E. D., Moscatelli, I., Camaioni, A., Armentano, I., Campagnolo, L., Dottori, M., Kenny, J. M., Siracusa, G., & Gusmano, G. (2009) · Materials Science and Engineering C · doi:10.1016/j.msec.2009.04.004 · Cited by 73
3D printing of silver-doped polycaprolactone-poly(propylene succinate) composite scaffolds for skin tissue engineering
Afghah, F., Ullah, M., Zanjani, J. S. M., Süt, P. A., Şen, Ö., Emanet, M., Okan, B. S., Çulha, M., Menceloǵlu, Y. Z., Yıldız, M., et al. (2020) · Biomedical Materials · doi:10.1088/1748-605x/ab7417 · Cited by 71
pH and light‐responsive polycaprolactone/curcumin@zif‐8 composite films with enhanced antibacterial activity
Cai, Y., Guan, J., Wang, W., Wang, L., Su, J., & Fang, L. (2021) · Journal of Food Science · doi:10.1111/1750-3841.15839 · Cited by 71
Nano-/Microfibrous Cotton-Wool-Like 3D Scaffold with Core–Shell Architecture by Emulsion Electrospinning for Skin Tissue Regeneration
Pal, P., Srivas, P. K., Dadhich, P., Das, B., Maulik, D., & Dhara, S. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00681 · Cited by 71
On the Correlation of Lignocellulosic Filler Composition with the Performance Properties of Poly(ε-Caprolactone) Based Biocomposites
Hejna, A., Sulyman, M. O., Przybysz-Romatowska, M., Saeb, M. R., Klein, M., & Formela, K. (2018) · Waste and Biomass Valorization · doi:10.1007/s12649-018-0485-5 · Cited by 71
Electrospinning of bioactive polycaprolactone-gelatin nanofibres with increased pore size for cartilage tissue engineering applications
Semitela, Â., Girão, A. F., Fernandes, C., Ramalho, G., Bdikin, I. K., Completo, A., & Marques, P. A. A. P. (2020) · Journal of Biomaterials Applications · doi:10.1177/0885328220940194 · Cited by 71
Optimizing the nanostructure of graphene oxide/silver/arginine for effective wound healing
Shahmoradi, S., Golzar, H., Hashemi, M., Mansouri, V., Omidi, M., Yazdian, F. A., Yadegari, A., & Tayebi, L. (2018) · Nanotechnology · doi:10.1088/1361-6528/aadedc · Cited by 70
Bioactive starch-based scaffolds and human adipose stem cells are a good combination for bone tissue engineering
Rodrigues, A. I., Gomes, M. E., Leonor, I. B., & Reis, R. L. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.05.025 · Cited by 70
Fabrication of a poly(ɛ‐caprolactone)/starch nanocomposite scaffold with a solvent‐casting/salt‐leaching technique for bone tissue engineering applications
Taherkhani, S., & Moztarzadeh, F. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43523 · Cited by 70
Nano/microscale topographically designed alginate/PCL scaffolds for inducing myoblast alignment and myogenic differentiation
Yeo, M., & Kim, G. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115041 · Cited by 70
3D bio-printing of levan/polycaprolactone/gelatin blends for bone tissue engineering: Characterization of the cellular behavior
Duymaz, B. T., Erdiler, F. B., Alan, T., Aydoğdu, M. O., İnan, A. T., Ekren, N., Uzun, M., Şahin, Y. M., Buluş, E., Oktar, F. N., et al. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.08.015 · Cited by 69
Electrospun nanofibers of poly(ε-caprolactone)/depolymerized chitosan for respiratory tissue engineering applications
Mahoney, C. H., Conklin, D. R., Waterman, J. T., Sankar, J., & Bhattarai, N. (2016) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2016.1144454 · Cited by 69
Heterogeneous electrospun polycaprolactone/polyethylene glycol membranes with improved wettability, biocompatibility, and mineralization
Tiwari, A. P., Joshi, M. K., Lee, J. E.-Y., Maharjan, B., Ko, S. W., Park, C. H., & Kim, C. S. (2017) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2017.01.054 · Cited by 70
Titanium Nanorods Loaded PCL Meshes with Enhanced Blood Vessel Formation and Cell Migration for Wound Dressing Applications
Augustine, R., Hasan, A., KHANAM, P. N., Augustine, A., Dalvi, Y. B., Varghese, R., Unni, R. N., Kalarikkal, N., Moustafa, A. A., & Thomas, S. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900058 · Cited by 69
Biodegradable poly(ε-caprolactone) as a controlled drug delivery vehicle of vancomycin for the treatment of MRSA infection
Rai, A., Senapati, S., Saraf, S. K., & Maiti, P. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01623e · Cited by 70
Nanoencapsulation of natural triterpenoid celastrol for prostate cancer treatment
Sanna, V., Chamcheu, J. C., Pala, N., Mukhtar, H., Sechi, M., & Siddiqui, I. A. (2015) · International Journal of Nanomedicine · doi:10.2147/ijn.s93752 · Cited by 67
Degradation of poly(ɛ-caprolactone) (PCL) by a newly isolated Brevundimonas sp. strain MRL-AN1 from soil
Nawaz, A., Hasan, F., & Shah, A. A. (2015) · FEMS Microbiology Letters · doi:10.1093/femsle/fnu004 · Cited by 67
Supramolecular Copolyesters with Tunable Properties
van Beek, D. J. M., Gillissen, M. A. J., van As, B. A. C., Palmans, A. R. A., & Sijbesma, R. P. (2007) · Macromolecules · doi:10.1021/ma0705927 · Cited by 67

Authors: Elzein, T., Nasser-Eddine, M., Delaite, C., Bistac, S., & Dumas, P.
Corresponding author: Elzein, Tamara
ORCID: Elzein, Tamara
Delaite, Christelle
Bistac, Sophie
Venue: Journal of Colloid and Interface Science
Publisher: Elsevier BV
Published: 2004-05
Volume: 273
Issue: 2
Pages: 381-387
ISSN: 0021-9797 (ISSN-L)
DOI: 10.1016/j.jcis.2004.02.001
OpenAlex: W2086588103
Cited by: 814
References: 24
Citations by year: 2026: 42 · 2025: 77 · 2024: 56 · 2023: 64 · 2022: 63 · 2021: 61 · 2020: 68 · 2019: 64 · 2018: 72 · 2017: 45 · 2016: 39 · 2015: 34 · 2014: 25 · 2013: 23 · 2012: 15
FWCI: 3.38
Type: journal article
Language: en
Open access: closed
Licence: www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations: Journal of Colloid and Interface Science (publishedVersion)
PubMed (publishedVersion)
Topics: Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords: polycaprolactone, polymer chain orientation, interfacial adsorption, polymer thin films, gold substrate, spin-coated films, PM-IRRAS, crystallinity, adsorption modeling, biomaterials

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

FTIR study of polycaprolactone chain organization at interfaces

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Citations

Cites

Cited by

Related

Metadata

Record

About these checks