The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture
Abstract
Activated carbons (AC) were prepared by carbonization and KOH activation using rice husk as feedstock. The effects of impregnation ratios and activation temperatures on the properties of AC were investigated. Under optimum conditions, BET surface area, total pore volume and micropore volume of AC are as high as 1495.52 m2/g, 0.786 cm3/g and 0.447 cm3/g, respectively. Surface modification with chitosan as nitrogen source was performed simultaneously during KOH activation process. XPS and FT-IR analyses show that N-species was successfully incorporate into AC. Compared with AC-5 (general AC), CAC-5 (modified AC) exhibits better CO2 adsorption performance, reaching 5.83 mmol/g at 273 K and 1 bar, which can be attributed to the formation of the CO2-philic active sites on AC surface by N-species. The linear correlations between CO2 uptake, micropore volume within specific size section and N-content was investigated. The isosteric heat of CO2 adsorption for CAC-5 (average 30.21 kJ/mol) is much higher than that of AC-5 (average 14.48 kJ/mol). The adsorption behavior of CAC-5 can be well described by Freundlich model. The high IAST selectivity factor for N-doped ACs indicates their excellent adsorption selectivity for CO2 over N2. Both physisorption and chemisorption are present in CO2 adsorption process of N-doped ACs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Sheng, Z.-H., Shao, L., Chen, J.-J., Bao, W.-J., Wang, F.-B., & Xia, X.-H. (2011) · ACS Nano · doi:10.1021/nn103584t · Cited by 2,573
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
Hou, J., Cao, C., Idrees, F., & Ma, X. (2015) · ACS Nano · doi:10.1021/nn506394r · Cited by 1,529
Lillo-Ródenas, M. A., Cazorla-Amorós, D., & Linares-Solano, A. (2005) · Carbon · doi:10.1016/j.carbon.2005.02.023 · Cited by 543
Fang, J., Fan, H., Li, M., & Long, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02257f · Cited by 521
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Cited by
Recent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
A review of carbon materials for supercapacitors
Zhai, Z., Zhang, L., Du, T., Ren, B., Xu, Y., Wang, S., Miao, J., & Liu, Z. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111017 · Cited by 647
Chakraborty, R., K, V., Pradhan, M., & Nayak, A. K. (2022) · Journal of Materials Chemistry A · doi:10.1039/d1ta10269a · Cited by 314
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
In-situ immobilization of ZIF-67 on wood aerogel for effective removal of tetracycline from water
Chen, G., He, S., Shi, G., Ma, Y., Ruan, C., Jin, X., Chen, Q., Liu, X., Dai, H., Chen, X., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130184 · Cited by 289
Self-citationBiomass-based carbon materials for CO2 capture: A review
Quan, C., Zhou, Y., Wang, J., Wu, C., & Gao, N. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102373 · Cited by 200
Kundu, S., Khandaker, T., Anik, M. A.-A. M., Hasan, M. K., Dhar, P. K., Dutta, S. K., Latif, M. A., & Hossain, M. S. (2024) · RSC Advances · doi:10.1039/d4ra04537h · Cited by 181
Functional Biochar Synergistic Solid/Liquid-Phase CO2 Capture: A Review
Zhang, Y., Wang, S., Feng, D., Gao, J., Dong, L., Zhao, Y., Sun, S., Huang, Y., & Qin, Y. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c04372 · Cited by 91
Kamran, U., Rhee, K. Y., Lee, S.-Y., & Park, S.-J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133367 · Cited by 67
Zhou, S., Xu, H., Wang, S., Feng, H., Hu, Y., & Zhang, S. (2024) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.169856 · Cited by 52
PVA-assisted CNCs/SiO2 composite aerogel for efficient sorption of ciprofloxacin
Ruan, C., Chen, G., Ma, Y., Du, C., He, C., Liu, X., Jin, X., Chen, Q., He, S., & Huang, Y. (2023) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.10.020 · Cited by 49
Self-citationFeizi-Afshar, B., Vafajoo, L., & Farzi, A. (2026) · Results in Chemistry · doi:10.1016/j.rechem.2025.102921 · Cited by 4
Metadata
- Authors
- He, S., Chen, G., Xiao, H., Shi, G., Ruan, C., Ma, Y., Dai, H., Yuan, B., Chen, X., & Yang, X.
- Venue
- Journal of Colloid and Interface Science
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 582
- Issue
- Pt A
- Pages
- 90-101
- ISSN
- 0021-9797 (ISSN-L)
- OpenAlex
- W3048174427
- Cited by
- 375
- References
- 59
- FWCI
- 19.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.