The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture
Abstract
Activated carbons (AC) were prepared by carbonization and KOH activation using rice husk as feedstock. The effects of impregnation ratios and activation temperatures on the properties of AC were investigated. Under optimum conditions, BET surface area, total pore volume and micropore volume of AC are as high as 1495.52 m2/g, 0.786 cm3/g and 0.447 cm3/g, respectively. Surface modification with chitosan as nitrogen source was performed simultaneously during KOH activation process. XPS and FT-IR analyses show that N-species was successfully incorporate into AC. Compared with AC-5 (general AC), CAC-5 (modified AC) exhibits better CO2 adsorption performance, reaching 5.83 mmol/g at 273 K and 1 bar, which can be attributed to the formation of the CO2-philic active sites on AC surface by N-species. The linear correlations between CO2 uptake, micropore volume within specific size section and N-content was investigated. The isosteric heat of CO2 adsorption for CAC-5 (average 30.21 kJ/mol) is much higher than that of AC-5 (average 14.48 kJ/mol). The adsorption behavior of CAC-5 can be well described by Freundlich model. The high IAST selectivity factor for N-doped ACs indicates their excellent adsorption selectivity for CO2 over N2. Both physisorption and chemisorption are present in CO2 adsorption process of N-doped ACs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Sheng, Z.-H., Shao, L., Chen, J.-J., Bao, W.-J., Wang, F.-B., & Xia, X.-H. (2011) · ACS Nano · doi:10.1021/nn103584t · Cited by 2,573
Carbon capture and storage: how green can black be
Haszeldine, R. S. (2009) · Science · doi:10.1126/science.1172246 · Cited by 2,021
Hou, J., Cao, C., Idrees, F., & Ma, X. (2015) · ACS Nano · doi:10.1021/nn506394r · Cited by 1,529
Lillo-Ródenas, M. A., Cazorla-Amorós, D., & Linares-Solano, A. (2005) · Carbon · doi:10.1016/j.carbon.2005.02.023 · Cited by 543
Fang, J., Fan, H., Li, M., & Long, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02257f · Cited by 521
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Enhanced CO2 Capture Capacity of Nitrogen-Doped Biomass-Derived Porous Carbons
Chen, J., Yang, J., Hu, G., Hu, X., Li, Z., Shen, S., Radosz, M., & Fan, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01425 · Cited by 419
Importance of small micropores in CO 2 capture by phenolic resin-based activated carbon spheres
Wickramaratne, N. P., & Jaroniec, M. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00388k · Cited by 415
Nanda, S., Dalai, A. K., Berruti, F., & Kozinski, J. A. (2016) · Waste and Biomass Valorization · doi:10.1007/s12649-015-9459-z · Cited by 401
Reed, B. E., & Matsumoto, M. R. (1993) · Separation Science and Technology · doi:10.1080/01496399308016742 · Cited by 346
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Comprehensive study of ultra-microporous nitrogen-doped activated carbon for CO2 capture
Sethia, G., & Sayari, A. (2015) · Carbon · doi:10.1016/j.carbon.2015.05.017 · Cited by 319
Preparation and characterization of super activated carbon produced from gulfweed by KOH activation
Li, S., Han, K., Li, J., Li, M., & Lu, C. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.02.052 · Cited by 305
Biomass derived low-cost microporous adsorbents for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2015) · Fuel · doi:10.1016/j.fuel.2015.01.032 · Cited by 300
Effect of heat treatment on hydrophobic silica aerogel
He, S., Huang, Y., Chen, G., Feng, M., Dai, H., Yuan, B., & Chen, X. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.08.087 · Cited by 269
Self-citationSilva, T. L., Ronix, A., Pezoti, O., Souza, L. S., Leandro, P. K. T., Bedin, K. C., Beltrame, K. K., Cazetta, A. L., & Almeida, V. C. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.06.009 · Cited by 267
Torrellas, S. Á., García Lovera, R., Escalona, N., Sepúlveda, C., Sotelo, J. L., & García, J. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.05.104 · Cited by 257
A dual-site Langmuir equation for accurate estimation of high pressure deep shale gas resources
Tang, X., Ripepi, N., Stadie, N. P., Yu, L., & Hall, M. R. (2016) · Fuel · doi:10.1016/j.fuel.2016.07.088 · Cited by 240
Zhao, C., Chen, X., Anthony, E. J., Jiang, X., Duan, L., Wu, Y., Dong, W. G., & Zhao, C. (2013) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2013.05.001 · Cited by 209
Self-citationHuang, Y., Ma, E., & Zhao, G. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.002 · Cited by 201
Li, M., & Xiao, R. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.12.015 · Cited by 198
Xiao, K., Liu, H., Li, Y., Yang, G., Wang, Y., & Yao, H. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122997 · Cited by 198
Zhao, N., Fan, H., Zhang, M., Wang, C., Ren, X., Peng, H., Li, H., Jiang, X., & Cao, X. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.05.023 · Cited by 179
Monazam, E. R., Shadle, L. J., Miller, D. C., Pennline, H. W., Fauth, D. J., Hoffman, J. S., & Gray, M. L. (2012) · AIChE Journal · doi:10.1002/aic.13870 · Cited by 168
Zeng, S., Duan, S., Tang, R., Li, L., Liu, C., & Sun, D. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.07.093 · Cited by 168
Nitrogen‐doping activated biomass carbon from tea seed shell for CO 2 capture and supercapacitor
Quan, C., Jia, X., & Gao, N. (2020) · International Journal of Energy Research · doi:10.1002/er.5017 · Cited by 167
Zhang, P., Zhong, Y., Ding, J., Wang, J., Xu, M., Deng, Q., Zeng, Z., & Deng, S. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.08.219 · Cited by 165
Rehman, A., & Park, S.-J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.063 · Cited by 164
El-Hendawy, A.-N. A., Alexander, A. J., Andrews, R. J., & Forrest, G. A. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.04.006 · Cited by 157
Kim, J., Lin, L., Swisher, J. A., Harańczyk, M., & Smit, B. (2012) · Journal of the American Chemical Society · doi:10.1021/ja309818u · Cited by 143
Tran, H. N., Chao, H., & You, S. (2017) · Adsorption Science & Technology · doi:10.1177/0263617416684837 · Cited by 141
Liu, S., Ma, R., Hu, X. D., Wang, L., Wang, X., Radosz, M., & Fan, M. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02127 · Cited by 135
Dilokekunakul, W., Teerachawanwong, P., Klomkliang, N., Supasitmongkol, S., & Chaemchuen, S. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124413 · Cited by 135
Investigation of rice husk derived activated carbon for removal of nitrate contamination from water
Satayeva, A., Howell, C. A., Korobeinyk, A. V., Jandosov, J., Inglezakis, V. J., Mansurov, Z. A., & Mikhalovsky, S. V. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.02.329 · Cited by 133
Cuong, D. V., Liu, N.-L., Nguyen, V. A., & Hou, C.-H. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.07.125 · Cited by 119
Zhang, X., Zhang, S., Yang, H., Shao, J., Chen, Y., Feng, Y., Wang, X., & Chen, H. (2015) · Energy · doi:10.1016/j.energy.2015.08.028 · Cited by 109
Singh, G., Ismail, I. S., Bilen, C., Shanbhag, D., Sathish, C., Ramadass, K., & Vinu, A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113831 · Cited by 105
Gao, X., Jiang, L., & Xu, Q. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121645 · Cited by 105
A direct synthesis of mesoporous carbon supported MgO sorbent for CO2 capture
Bhagiyalakshmi, M., Hemalatha, P., Ganesh, M., Mei, P., & Jang, H. T. (2010) · Fuel · doi:10.1016/j.fuel.2010.10.050 · Cited by 103
Chitosan-based zeolite-Y and ZSM-5 porous biocomposites for H2 and CO2 storage
Kumar, S., Bera, R., Das, N., & Koh, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115808 · Cited by 91
A low cost and highly efficient adsorbent (activated carbon) prepared from waste potato residue
Zhang, Z., Luo, X., Liu, Y., Zhou, P., Ma, G., Lei, Z., & Lei, L. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2014.11.024 · Cited by 88
Highly selective CO2 capture by nitrogen enriched porous carbons
Cong, H., Zhang, M., Chen, Y., Chen, K., Hao, Y., Zhao, Y., & Feng, L. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.052 · Cited by 79
Facile synthesis of carbon self-doped g-C3N4 for enhanced photocatalytic hydrogen evolution
Cao, J., Fan, H., Wang, C., Ma, J., Dong, G., & Zhang, M. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.12.008 · Cited by 77
CO2 capture by modified porous carbon adsorbents: Effect of various activating agents
Singh, J., Basu, S., & Bhunia, H. (2019) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2019.06.011 · Cited by 73
Reusable nitrogen-doped mesoporous carbon adsorbent for carbon dioxide adsorption in fixed-bed
Yaumi, A. L., Bakar, M. Z. A., & Hameed, B. H. (2017) · Energy · doi:10.1016/j.energy.2017.07.130 · Cited by 66
Nowruzi, R., Heydari, M., & Javanbakht, V. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.044 · Cited by 65
Erdoğan, F. O. (2018) · International Journal of Chemical Reactor Engineering · doi:10.1515/ijcre-2018-0134 · Cited by 64
Facile Preparation of Nitrogen-Doped Activated Carbon for Carbon Dioxide Adsorption
Chen, L., Peng, P.-Y., Lin, L.-F., Yang, T. C. ‐., & Huang, C.-M. (2014) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2013.03.0089 · Cited by 63
Suo, X., Xia, L., Yang, Q., Zhang, Z., Bao, Z., Ren, Q., Yang, Y., & Xing, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01986f · Cited by 58
Wang, J., Han, L., Wu, N., Zhang, Z., Liao, C., Wang, J., Kan, Y., & Hu, Y. Z. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227789 · Cited by 56
Ferraz, F. M., & Yuan, Q. (2019) · Sustainable materials and technologies · doi:10.1016/j.susmat.2019.e00141 · Cited by 54
Hierarchical porous carbon activated by CaCO3 from pigskin collagen for CO2 and H2 adsorption
Gao, A., Guo, N., Yan, M., Li, M., Wang, F., & Yang, R. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.08.048 · Cited by 49
Cooperative CO 2 adsorption promotes high CO 2 adsorption density over wide optimal nanopore range
Chen, L., Watanabe, T., Kanoh, H., Hata, K., & Ohba, T. (2017) · Adsorption Science & Technology · doi:10.1177/0263617417713573 · Cited by 48
Dong, L., Liu, W., Yu, Y. F., Hou, L., Gu, P. D., & Chen, G. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.07.280 · Cited by 45
Self-citationWang, L., Zou, R., Guo, W., Gao, S. W., Meng, W., Yang, J., Chen, X., & Zou, R. (2019) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2019.03.029 · Cited by 32
Self-citationKwac, K., Lee, J. H., Choi, J. W., & Jung, Y. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b12404 · Cited by 22
Template-free synthesis of nitrogen-doped hierarchical porous carbon for supercapacitor electrodes
Feng, X., Xie, G., Wang, Z., Cao, J., Hu, P., & Tian, S. (2018) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-018-9004-5 · Cited by 5
Cited by
Recent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
A review of carbon materials for supercapacitors
Zhai, Z., Zhang, L., Du, T., Ren, B., Xu, Y., Wang, S., Miao, J., & Liu, Z. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111017 · Cited by 647
Chakraborty, R., K, V., Pradhan, M., & Nayak, A. K. (2022) · Journal of Materials Chemistry A · doi:10.1039/d1ta10269a · Cited by 314
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Raganati, F., & Ammendola, P. (2024) · Energy & Fuels · doi:10.1021/acs.energyfuels.4c02513 · Cited by 296
In-situ immobilization of ZIF-67 on wood aerogel for effective removal of tetracycline from water
Chen, G., He, S., Shi, G., Ma, Y., Ruan, C., Jin, X., Chen, Q., Liu, X., Dai, H., Chen, X., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130184 · Cited by 289
Self-citation
Metadata
- Authors
- He, S., Chen, G., Xiao, H., Shi, G., Ruan, C., Ma, Y., Dai, H., Yuan, B., Chen, X., & Yang, X.
- Venue
- Journal of Colloid and Interface Science
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 582
- Issue
- Pt A
- Pages
- 90-101
- ISSN
- 0021-9797 (ISSN-L)
- OpenAlex
- W3048174427
- Cited by
- 375
- References
- 59
- FWCI
- 19.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.