The DOI matches its Crossref record; 56 of the 56 references it cites were found in a registry or an index.
Measuring the circular economy - A Multiple Correspondence Analysis of 63 metrics
Abstract
Abstract Considerable efforts are undertaken to make the transition towards a more Circular Economy (CE). At the same time there is no generally accepted monitoring framework. Rather, what exists is a large variety of measurement approaches that aim to assess the progress. The different assessment methodologies cover different and varied aspects of the CE transition and are seemingly unrelated to each other. Therefore, the main contribution of this paper is the provision of a structured picture of the current stock of CE metrics, including the identification of methodology clusters and the related assessment perspectives. The method of Multiple Correspondence Analysis (MCA) was used to assess 63 CE metrics and 24 features relevant to CE, such as recycling efficiency, longevity and stock availability. The MCA was used to assess how the different CE features are associated to each other and how they are related with each of the 63 metrics. Also, it was determined which combinations of CE features are frequently assessed together. The analysis identified three main clusters of metrics, (1) a resource-efficiency cluster, (2) a materials stocks and flows cluster, (3) a product-centric cluster. The results of the analysis show poor integration of resource-efficiency and product-centric perspectives, while the product-centric and system-dynamic perspectives are least frequently assessed. Further, the analysis provides the most prevailing CE perspectives and it is shown that only a few CE metrics assess CE features that are related to the maintenance of value. The MCA provides a guidance for further metrics development, as it identifies areas with a lower metrics density. For a detailed analysis, a standardized visualisation framework for CE metrics is derived, which allows to compare individual metrics in a simple and illustrative way. The goal of the visualisation framework is to provide guidance for (i) the integration of the most complementary CE metrics and (ii) facilitate further metrics development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The qualitative content analysis process
Elo, S., & Kyngäs, H. (2008) · Journal of Advanced Nursing · doi:10.1111/j.1365-2648.2007.04569.x · Cited by 22,617
The Circular Economy–A new sustainability paradigm?
Geissdoerfer, M., Savaget, P., Bocken, N. M. P., & Hultink, E. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.12.048 · Cited by 9,360
Conceptualizing the circular economy: An analysis of 114 definitions
Kirchherr, J., Reike, D., & Hekkert, M. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.09.005 · Cited by 8,550
Ghisellini, P., Cialani, C., & Ulgiati, S. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.007 · Cited by 6,536
Product design and business model strategies for a circular economy
Bocken, N. M. P., de Pauw, I., Bakker, C., & van der Grinten, B. (2016) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2016.1172124 · Cited by 4,002
Towards circular economy implementation: A comprehensive review in context of manufacturing industry
Lieder, M., & Rashid, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.042 · Cited by 2,762
Correspondence Analysis in Practice
Greenacre, M. (2007) · Chapman & Hall/CRC eBooks · doi:10.1201/9781420011234 · Cited by 2,040
The emergence of circular economy: a new framing around prolonging resource productivity
Blomsma, F., & Brennan, G. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12603 · Cited by 1,383
Haas, W., Krausmann, F., Wiedenhofer, D., & Heinz, M. (2015) · Journal of Industrial Ecology · doi:10.1111/jiec.12244 · Cited by 1,154
Correspondence Analysis in Practice
Greenacre, M. (2017) · Chapman & Hall/CRC eBooks · doi:10.1201/9781315369983 · Cited by 1,108
The history and current applications of the circular economy concept
Winans, K., Kendall, A., & Deng, H. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.09.123 · Cited by 1,024
Measuring circular economy strategies through index methods: A critical analysis
Elia, V., Gnoni, M. G., & Tornese, F. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.196 · Cited by 892
Ranta, V., Aarikka-Stenroos, L., Ritala, P., & Mäkinen, S. J. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.08.017 · Cited by 674
Indicators of Sustainable Development for Industry
Azapagic, A., & Perdan, S. (2000) · Process Safety and Environmental Protection · doi:10.1205/095758200530763 · Cited by 567
Pauliuk, S. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.10.019 · Cited by 554
Towards a Circular Economy– a Zero Waste Programme for Europe
DESELNICU, D. C., MILITARU, G., DESELNICU, V., ZĂINESCU, G., & ALBU, L. (2018) · The International Conference on Advanced Materials and Systems · doi:10.24264/icams-2018.xi.4 · Cited by 533
Correspondence Analysis: Graphical Representation of Categorical Data in Marketing Research
Hoffman, D. L., & Franke, G. R. (1986) · Journal of Marketing Research · doi:10.1177/002224378602300302 · Cited by 517
Multiple Correspondence Analysis
(2021) · Wiley Series in Probability and Statistics · doi:10.1002/9781119044482.ch6 · Cited by 493
Taking Stock of Industrial Ecology
(2016) · Springer eBooks · doi:10.1007/978-3-319-20571-7 · Cited by 481
A Metric for Quantifying Product‐Level Circularity
Linder, M., Sarasini, S., & van Loon, P. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12552 · Cited by 475
Resource recovery from post-consumer waste: important lessons for the upcoming circular economy
Singh, J., & Ordoñez, I. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.020 · Cited by 467
Zaman, A. U., & Lehmann, S. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.11.041 · Cited by 423
Enhanced Landfill Mining in view of multiple resource recovery: a critical review
Jones, P. T., Geysen, D., Tielemans, Y., Van Passel, S., Pontikes, Y., Blanpain, B., Quaghebeur, M., & Hoekstra, N. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.05.021 · Cited by 394
Resource duration as a managerial indicator for Circular Economy performance
Franklin-Johnson, E., Figge, F., & Canning, L. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.023 · Cited by 377
Haupt, M., Vadenbo, C., & Hellweg, S. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12506 · Cited by 345
Dewulf, J., Bösch, M. E., Meester, B. D., Vorst, G. V. D., Langenhove, H. V., Hellweg, S., & Huijbregts, M. A. J. (2007) · Environmental Science & Technology · doi:10.1021/es0711415 · Cited by 330
Subramoniam, R., Huisingh, D., & Chinnam, R. B. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.03.004 · Cited by 317
The Circular Economy: A review of definitions, processes and impactsPreprint
Rizos, V., Tuokko, K., & Behrens, A. (2017) · RePEc: Research Papers in Economics · Cited by 303
Material Flow Analysis with Software STAN
Cencic, O., & Rechberger, H. (2008) · EnviroInfo · Cited by 299
Self-citationSaidani, M., Yannou, B., Leroy, Y., & Cluzel, F. (2017) · Recycling · doi:10.3390/recycling2010006 · Cited by 293
Circular economy indicators in relation to eco-innovation in European regions
Smol, M., Kulczycka, J., & Avdiushchenko, A. (2017) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-016-1323-8 · Cited by 285
Applied correspondence analysis : an introduction
Clausen, S.-E. (1998) · Cited by 282
Wu, H.-Q., Shi, Y., Xia, Q., & Zhu, W.-D. (2014) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.10.003 · Cited by 277
Establishing and testing the “reuse potential” indicator for managing wastes as resources
Park, J. Y., & Chertow, M. R. (2014) · Journal of Environmental Management · doi:10.1016/j.jenvman.2013.11.053 · Cited by 262
Longevity and Circularity as Indicators of Eco-Efficient Resource Use in the Circular Economy
Figge, F., Thorpe, A. S., Givry, P., Canning, L., & Franklin-Johnson, E. (2018) · Ecological Economics · doi:10.1016/j.ecolecon.2018.04.030 · Cited by 241
Wen, Z., & Meng, X. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.03.041 · Cited by 227
A review of the circular economy and its implementation
Heshmati, A. (2017) · International Journal of Green Economics · doi:10.1504/ijge.2017.089856 · Cited by 218
Mode of circular economy in China's iron and steel industry: a case study in Wu'an city
Ma, S.-H., Wen, Z.-G., Chen, J.-N., & Wen, Z.-C. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.10.008 · Cited by 181
In search of standards to support circularity in product policies: A systematic approach
Tecchio, P., McAlister, C., Mathieux, F., & Ardente, F. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.198 · Cited by 177
Assessment of the National Eco‐Industrial Park Standard for Promoting Industrial Symbiosis in China
Geng, Y., Zhang, P., Côté, R. P., & Fujita, T. (2009) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2008.00071.x · Cited by 176
Emergy analysis of an industrial park: The case of Dalian, China
Geng, Y., Zhang, P., Ulgiati, S., & Sarkis, J. (2010) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2010.07.081 · Cited by 176
What Gets Recycled: An Information Theory Based Model for Product Recycling
Dahmus, J. B., & Gutowski, T. G. (2007) · Environmental Science & Technology · doi:10.1021/es062254b · Cited by 165
Valenzuela-Venegas, G., Salgado, J. C., & Díaz-Alvarado, F. A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.113 · Cited by 152
Golińska-Dawson, P., Kosacka-Olejnik, M., Mierzwiak, R., & Werner-Lewandowska, K. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.11.040 · Cited by 149
A multidimensional indicator set to assess the benefits of WEEE material recycling
Nelen, D., Manshoven, S., Peeters, J. R., Vanegas, P., D’Haese, N., & Vrancken, K. C. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.06.094 · Cited by 121
Self-citationMa, S., Hu, S., Chen, D., et al. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.059 · Cited by 105
Material Resources, Productivity and the Environment
OECD (2015) · OECD green growth studies · doi:10.1787/9789264190504-en · Cited by 105
Managing Critical Materials with a Technology-Specific Stocks and Flows Model
Busch, J., Steinberger, J. K., Dawson, D., Purnell, P., & Roelich, K. E. (2013) · Environmental Science & Technology · doi:10.1021/es404877u · Cited by 100
A Review of the Circular Economy and its ImplementationPreprint
Heshmati, A. (2016) · SSRN Electronic Journal · doi:10.2139/ssrn.2713032 · Cited by 94
Liu, Z., Li, T., Jiang, Q., & Zhang, H. (2014) · Journal of Industrial Ecology · doi:10.1111/jiec.12137 · Cited by 88
An analysis of E-waste flows in China
Veenstra, A. W., Wang, C., Fan, W., & Ru, Y. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2356-5 · Cited by 66
Reutilisation-extended material flows and circular economy in China
Li, N., Zhang, T., & Liang, S. (2013) · Waste Management · doi:10.1016/j.wasman.2013.01.029 · Cited by 44
Design of Indicators for Measuring Product Performance in the Circular Economy
Griffiths, P. I. J., & Cayzer, S. (2016) · Smart innovation, systems and technologies · doi:10.1007/978-3-319-32098-4_27 · Cited by 44
Multiple Correspondence Analysis
Gower, J., Lubbe, S., & le Roux, N. (2010) · Wiley eBooks · doi:10.1002/9780470973196.ch8 · Cited by 43
System dynamics models for decision making in product multiple lifecycles
Asif, F. M. A., Rashid, A., Bianchi, C., & Nicolescu, C. M. (2015) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2015.05.002 · Cited by 37
Cited by
Kristensen, H. S., & Mosgaard, M. A. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118531 · Cited by 794
Schöggl, J.-P., Stumpf, L., & Baumgartner, R. J. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.105073 · Cited by 434
Harris, S., Martin, M., & Diener, D. (2021) · Sustainable Production and Consumption · doi:10.1016/j.spc.2020.09.018 · Cited by 391
Berger, K., Schöggl, J.-P., & Baumgartner, R. J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.131492 · Cited by 216
Synergies and gaps between circularity assessment and Life Cycle Assessment (LCA)
Samani, P. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.166611 · Cited by 81
Metadata
- Authors
- Parchomenko, A., Nelen, D., Gillabel, J., & Rechberger, H.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 210
- Pages
- 200-216
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2899872742
- Cited by
- 374
- References
- 56
- FWCI
- 48.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.