The DOI matches its Crossref record; 126 of the 126 references it cites were found in a registry or an index.
Clean production and properties of geopolymer concrete; A review
Abstract
The incessant production of cement has increased the amount of CO2 being released into the atmosphere; thus, aggravating the issue of global warming which has an adverse effect on the environment. Therefore, a more sustainable approach and a careful review of the existing admixtures used to replace conventional concrete have become highly imperative. To this end, many investigations on geopolymer concrete (GeoPC), which exhibit similar or better durability and high strength when compared to conventional concrete, have been carried out by various researchers. GeoPC concrete has the advantage of cement replacement with supplementary cementitious materials that are combined with alkali activated solutions. GeoPC is a relatively new, innovative and sustainable engineering material with many advantages over ordinary concrete. For example, it exhibits higher early strength, lower natural resource consumption, low cost and ability to form various structural shapes. GeoPC is an essential material that can be used for concrete building repairs, maintenance of road transport infrastructure and reducing the negative environmental effects. Therefore, this paper presents a comprehensive review of GeoPC material, its constituents, production techniques, curing regimes, properties and its potential applications in the construction industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Theoretical Stress‐Strain Model for Confined Concrete
Mander, J. B., Priestley, M. J. N., & Park, R. (1988) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1988)114:8(1804 · Cited by 8,454
Neville, A. M. (1968) · Virtual Defense Library (Ministerio de Defensa) · Cited by 5,444
Etxeberria, M., Vázquez, E., Marí, A., & Barra, M. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.02.002 · Cited by 1,774
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Geopolymer concrete: A review of some recent developments
Singh, B., Ishwarya, G., Gupta, M., & Bhattacharyya, S. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.036 · Cited by 1,484
Mechanism of geopolymerization and factors influencing its development: a review
Khale, D., & Chaudhary, R. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0401-4 · Cited by 1,463
Nanoscale Materials in Chemistry
(2001) · Wiley eBooks · doi:10.1002/0471220620 · Cited by 1,397
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Resistance of geopolymer materials to acid attack
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.005 · Cited by 1,109
Fly ash-based geopolymer: clean production, properties and applications
Zhuang, X. Y., Chen, L., Komarneni, S., Zhou, C. H., Tong, D. S., Yang, H. M., Yu, W. H., & Wang, H. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.03.019 · Cited by 1,020
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
Geopolymerisation: A review and prospects for the minerals industry
Komnitsas, K., & Zaharaki, D. (2007) · Minerals Engineering · doi:10.1016/j.mineng.2007.07.011 · Cited by 955
The mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
Fly Ash-Based Geopolymer Concrete
Hardjito, D., Wallah, S. E., Sumajouw, D. M. J., & Rangan, B. V. (2005) · Australian Journal of Structural Engineering · doi:10.1080/13287982.2005.11464946 · Cited by 885
Assessment of CO2 reduction of alkali-activated concrete
Yang, K.-H., Song, J.-K., & Song, K.-I. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.08.001 · Cited by 832
Urban energy use and carbon emissions from cities in China and policy implications
Dhakal, S. (2009) · Energy Policy · doi:10.1016/j.enpol.2009.05.020 · Cited by 824
Do Geopolymers Actually Contain Nanocrystalline Zeolites? A Reexamination of Existing Results
Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2005) · Chemistry of Materials · doi:10.1021/cm050230i · Cited by 818
Kong, D. L. Y., Sanjayan, J. G., & Sagoe-Crentsil, K. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.021 · Cited by 806
Hemalatha, T., & Ramaswamy, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.114 · Cited by 800
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
He, J., Jie, Y., Zhang, J., Yu, Y., & Zhang, G. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.010 · Cited by 770
Effect of silica fume on mechanical properties of high-strength concrete
Mazloom, M., Ramezanianpour, A. A., & Brooks, J. J. (2004) · Cement and Concrete Composites · doi:10.1016/s0958-9465(03)00017-9 · Cited by 752
Geopolymers : structure, processing, properties and industrial applications
Provis, J. L., & van Deventer, J. S. J. (2009) · Cited by 674
Hassan, A., Arif, M., & Shariq, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.051 · Cited by 639
Görhan, G., & Kürklü, G. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.10.082 · Cited by 637
Yan, L., Kasal, B., & Huang, L. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.02.002 · Cited by 635
Treatment of chlorinated organic contaminants with nanoscale bimetallic particles
Zhang, W.-X., Wang, C.-B., & Lien, H.-L. (1998) · Catalysis Today · doi:10.1016/s0920-5861(98)00067-4 · Cited by 577
X-ray microtomography shows pore structure and tortuosity in alkali-activated binders
Provis, J. L., Myers, R. J., White, C. E., Rose, V., & van Deventer, J. S. J. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.03.004 · Cited by 572
Influence of mineral additions on the performance of 100% recycled aggregate concrete
Corinaldesi, V., & Moriconi, G. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.004 · Cited by 529
Factors affecting the suitability of fly ash as source material for geopolymers
Díaz, E., Allouche, E. N., & Eklund, S. E. (2009) · Fuel · doi:10.1016/j.fuel.2009.09.012 · Cited by 521
Nath, P., & Sarker, P. K. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.08.008 · Cited by 518
Production of eco-friendly bricks from copper mine tailings through geopolymerization
Ahmari, S., & Zhang, L. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.10.048 · Cited by 510
Sustainability of Concrete Construction
Naik, T. R. (2008) · Practice Periodical on Structural Design and Construction · doi:10.1061/(asce)1084-0680(2008)13:2(98 · Cited by 488
Development of vegetable fibre–mortar composites of improved durability
Tolêdo Filho, R. D., Ghavami, K., England, G. L., & Scrivener, K. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00018-5 · Cited by 482
Engineering Properties of Alkali-Activated Fly Ash Concrete
(2006) · ACI Materials Journal · doi:10.14359/15261 · Cited by 476
Bernal, S. A., Mejía de Gutiérrez, R., & Provis, J. L. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.01.017 · Cited by 455
Phoo-ngernkham, T., Chindaprasirt, P., Sata, V., Hanjitsuwan, S., & Hatanaka, S. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.09.049 · Cited by 452
Nematollahi, B., & Sanjayan, J. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.01.064 · Cited by 442
Effect of the Alkali Metal Activator on the Properties of Fly Ash-Based Geopolymers
van Jaarsveld, J. G. S., & van Deventer, J. S. J. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980804b · Cited by 432
Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization
Kumar, A., & Kumar, S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.013 · Cited by 425
Study on properties of rice husk ash and its use as cement replacement material
Habeeb, G. A., & Mahmud, H. B. (2010) · Materials Research · doi:10.1590/s1516-14392010000200011 · Cited by 421
He, J. X., Zhang, J., Yu, Y., & Zhang, G. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.011 · Cited by 376
Influence of aggregate content on the behavior of fly ash based geopolymer concrete
Joseph, B., & Mathew, G. (2012) · Scientia Iranica · doi:10.1016/j.scient.2012.07.006 · Cited by 374
Properties of concrete incorporating fly ash and ground granulated blast-furnace slag
Li, G., & Zhao, X. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00058-6 · Cited by 372
TRENDS IN RED MUD UTILIZATION – A REVIEW
PARAMGURU, R. K., RATH, P. C., & MISRA, V. N. (2004) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500490477603 · Cited by 370
Polymerization in sodium silicate solutions: a fundamental process in geopolymerization technology
Dimas, D., Giannopoulou, I., & Panias, D. (2009) · Journal of Materials Science · doi:10.1007/s10853-009-3497-5 · Cited by 367
High-Strength Geopolymer Using Fine High-Calcium Fly Ash
Chindaprasirt, P., Chareerat, T., Hatanaka, S., & Cao, T. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000161 · Cited by 365
Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack
Sata, V., Sathonsaowaphak, A., & Chindaprasirt, P. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.01.010 · Cited by 363
Synthesis and strength optimization of one-part geopolymer based on red mud
Ye, N., Yang, J., Liang, S., Hu, Y., Hu, J., Xiao, B., & Huang, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.099 · Cited by 363
Shaikh, F. U. A. (2016) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2016.05.009 · Cited by 362
High-Volume Fly Ash System: Concrete Solution for Sustainable Development
(2000) · ACI Materials Journal · doi:10.14359/804 · Cited by 356
Influence of recycled aggregate on fly ash geopolymer concrete properties
Nuaklong, P., Sata, V., & Chindaprasirt, P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.10.109 · Cited by 333
Setting Time, Strength, and Bond of High-Calcium Fly Ash Geopolymer Concrete
Topark-Ngarm, P., Chindaprasirt, P., & Sata, V. (2014) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001157 · Cited by 330
Factors influencing the compressive strength of fly ash based geopolymers
Soutsos, M. N., Boyle, A. P., Vinai, R., Hadjierakleous, A., & Barnett, S. J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.045 · Cited by 326
Gursel, A. P., Maryman, H., & Ostertag, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.029 · Cited by 320
Mazaheripour, H., Ghanbarpour, S., Mirmoradi, S. H., & Hosseinpour, I. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.06.018 · Cited by 320
Compressive strength, modulus of elasticity, and water permeability of inorganic polymer concrete
Wongpa, J., Kiattikomol, K., Jaturapitakkul, C., & Chindaprasirt, P. (2010) · Materials & Design · doi:10.1016/j.matdes.2010.05.012 · Cited by 310
The pore structure and permeability of alkali activated fly ash
Ma, Y., Hu, J., & Ye, G. (2013) · Fuel · doi:10.1016/j.fuel.2012.05.034 · Cited by 308
Bond strength between blended slag and Class F fly ash geopolymer concrete with steel reinforcement
Castel, A., & Foster, S. J. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.02.016 · Cited by 304
How Nanotechnology Can Change the Concrete World
Sobolev, K., & Ferrada Gutiérrez, M. (2009) · Progress in Nanotechnology · doi:10.1002/9780470588260.ch16 · Cited by 303
Islam, A. B. M. S., Alengaram, U. J., Jumaat, M. Z., & Bashar, I. I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.080 · Cited by 298
Long term durability properties of class F fly ash geopolymer concrete
Law, D. W., Adam, A. A., Molyneaux, T. K., Patnaikuni, I., & Wardhono, A. (2015) · Materials and Structures · doi:10.1617/s11527-014-0268-9 · Cited by 296
Review on treatment and utilization of bauxite residues in China
Liu, W., Yang, J., & Xiao, B. (2009) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2009.08.005 · Cited by 293
Alkali-activated concrete: Engineering properties and stress–strain behavior
Thomas, R. J., & Peethamparan, S. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.04.039 · Cited by 277
Efficiency of GGBS in concrete
Ganesh Babu, K., & Sree Rama Kumar, V (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00271-4 · Cited by 277
Comparison of long term performance between alkali activated slag and fly ash geopolymer concretes
Wardhono, A., Gunasekara, C., Law, D. W., & Setunge, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.153 · Cited by 270
Assessment of the surface permeation properties of recycled aggregate concrete
Zaharieva, R., Buyle-Bodin, F., Skoczylas, F., & Wirquin, É. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(02)00010-0 · Cited by 269
Nanoscale Materials in Chemistry
(2009) · Wiley eBooks · doi:10.1002/9780470523674 · Cited by 264
Noushini, A., Aslani, F., Castel, A., Gilbert, R. I., Uy, B., & Foster, S. J. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.07.004 · Cited by 259
Synthesis and Characterization of Geopolymer from Bayer Red Mud with Thermal Pretreatment
Ye, N., Yang, J., Ke, X., Zhu, J., Li, Y., Xiang, C., Wang, H., Li, L., & Xiao, B. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12840 · Cited by 257
Sorptivity and acid resistance of ambient-cured geopolymer mortars containing nano-silica
Deb, P. S., Sarker, P. K., & Barbhuiya, S. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.06.017 · Cited by 256
Duan, P., Yan, C., Luo, W., & Zhou, W. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.095 · Cited by 252
Strength and Setting Times of Low Calcium Fly Ash-based Geopolymer Mortar
Hardjito, D., Cheak, C. C., & Lee Ing, C. H. (2008) · Modern Applied Science · doi:10.5539/mas.v2n4p3 · Cited by 248
Reinforced geopolymer composites for enhanced material greenness and durability
Sakulich, A. R. (2011) · Sustainable Cities and Society · doi:10.1016/j.scs.2011.07.009 · Cited by 223
Properties of geopolymer with seeded fly ash and rice husk bark ash
Nazari, A., Bagheri, A., & Riahi, S. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.06.027 · Cited by 207
Poudenx, P. (2008) · Transportation Research Part A Policy and Practice · doi:10.1016/j.tra.2008.01.013 · Cited by 197
Lightweight geopolymer concrete containing aggregate from recycle lightweight block
Posi, P., Teerachanwit, C., Tanutong, C., Limkamoltip, S., Lertnimoolchai, S., Sata, V., & Chindaprasirt, P. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.06.001 · Cited by 196
Characteristics and applications of flash metakaolins
San Nicolas, R., Cyr, M., & Escadeillas, G. (2013) · Applied Clay Science · doi:10.1016/j.clay.2013.08.036 · Cited by 191
Ukwattage, N. L., Ranjith, P. G., & Bouazza, M. (2013) · Fuel · doi:10.1016/j.fuel.2013.02.016 · Cited by 191
Synthesis and mechanical properties of cotton fabric reinforced geopolymer composites
Alomayri, T. S., Shaikh, F. U. A., & Low, I. M. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.12.036 · Cited by 184
GEOPOLYMER: Chemistry & Applications
Davidovits, J. (2011) · Cited by 183
Preparation of fly ash and rice husk ash geopolymer
Sata, V., & Chindaprasirt, P. (2009) · International Journal of Minerals Metallurgy and Materials · doi:10.1016/s1674-4799(10)60019-2 · Cited by 182
Almeida, A. E. F. S., Tonoli, G. H. D., Santos, S. F., & Savastano, H. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.05.001 · Cited by 182
Resistance to acid and sulfate solutions of microwave-assisted high calcium fly ash geopolymer
Chindaprasirt, P., Rattanasak, U., & Taebuanhuad, S. (2013) · Materials and Structures · doi:10.1617/s11527-012-9907-1 · Cited by 181
Long term permeation properties of different fly ash geopolymer concretes
Gunasekara, C., Law, D. W., & Setunge, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.121 · Cited by 181
Strength and durability properties of alkali activated slag and fly ash-based geopolymer concrete
Adam, A. A. (2010) · RMIT Research Repository (RMIT University Library) · doi:10.25439/rmt.27351330 · Cited by 177
Salih, M. A., Ali, A. A. A., & Farzadnia, N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.031 · Cited by 175
Concrete Technology for a Sustainable Development in the 21st Century
(1999) · CRC Press eBooks · doi:10.1201/9781482272215 · Cited by 170
Islam, A., Alengaram, U. J., Jumaat, M. Z., Bashar, I. I., & Kabir, S. M. A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.026 · Cited by 170
Memon, F. A., Nuruddin, M. F., Khan, S. U., Shafiq, N., & Ayub, T. (2013) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 170
(2012) · ACI Materials Journal · doi:10.14359/51684080 · Cited by 168
Factors affecting the shrinkage of fly ash geopolymers
Ridtirud, C., Chindaprasirt, P., & Pimraksa, K. (2011) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-011-0407-z · Cited by 165
Utilization of sweet sorghum fiber to reinforce fly ash-based geopolymer
Chen, R., Ahmari, S., & Zhang, L. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7950-0 · Cited by 164
Toward an indexing approach to evaluate fly ashes for geopolymer manufacture
Zhang, Z., Provis, J. L., Zou, J., Reid, A., & Wang, H. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.04.007 · Cited by 161
Saraya, M. E.-S. I. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.08.071 · Cited by 157
Liu, M. Y. J., Alengaram, U. J., Santhanam, M., Jumaat, M. Z., & Mo, K. H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.076 · Cited by 154
Mechanism and Chemical Reaction of Fly Ash Geopolymer Cement- A Review
Abdullah, M. M. A. B., Kamarudin, H., Hussain, R. R., Ismail, K. N., Ibrahim, W. M. W., & Besar, P. (2011) · Journal of Asian Scientific Research · Cited by 152
Effect of types of curing on strength of geopolymer concrete
Vijai, K., Rathinam, K., & Vishnuram, B. G. (2010) · International Journal of the Physical Sciences · doi:10.5897/ijps.9000200 · Cited by 152
Formulation and performance of flash metakaolin geopolymer concretes
Pouhet, R., & Cyr, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.061 · Cited by 147
Non-destructive evaluation (NDE) of polymer matrix composites
Karbhari, V. M. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857093554 · Cited by 134
Review on fly ash-based geopolymer concrete without portland cement
Abdullah, M. M. A. B., Najm, . M., Kamarudin, H., Niza, I. K., & Yahya, Z. G. (2011) · Journal of Engineering and Technology · doi:10.5897/jetr.9000070 · Cited by 129
The stability of phase change materials in concrete
Hawes, D. W., Banu, D., & Feldman, D. (1992) · Solar Energy Materials and Solar Cells · doi:10.1016/0927-0248(92)90113-4 · Cited by 126
Al-Majidi, M. H., Lampropoulos, A. P., & Cundy, A. B. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.01.085 · Cited by 126
Geopolymer concrete for ambient curing condition
Nath, P., & Sarker, P. K. (2012) · eSpace (Curtin University) · Cited by 116
Strain sensing of carbon fiber reinforced geopolymer concrete
Vaidya, S., & Allouche, E. N. (2011) · Materials and Structures · doi:10.1617/s11527-011-9711-3 · Cited by 111
Effect of curing condition on strength of geopolymer concrete
Patil, A. A., Chore, H. S., & Dodeb, P. A. (2014) · Advances in concrete construction · doi:10.12989/acc.2014.2.1.029 · Cited by 102
Phosphate removal from water by fly ash using crossflow microfiltration
Yildız, E. (2003) · Separation and Purification Technology · doi:10.1016/s1383-5866(03)00145-x · Cited by 101
Lee, N. K., Kim, E. M., & Lee, H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.055 · Cited by 98
Latent heat storage in concrete. II
Hawes, D. W., Banu, D., & Feldman, D. G. (1990) · Solar Energy Materials · doi:10.1016/0165-1633(90)90043-z · Cited by 98
Vickers, L., van Riessen, A., & Rickard, W. D. A. (2014) · SpringerBriefs in materials · doi:10.1007/978-981-287-311-8 · Cited by 91
Sivaraja, M., Kandasamy, Velmani, N., & Pillai, M. S. (2010) · Bulletin of Materials Science · doi:10.1007/s12034-011-0149-6 · Cited by 89
Aspects of the deformational behaviour of alkali activated fly ash concrete at elevated temperatures
Junaid, M. T., Khennane, A., Kayali, O., Sadaoui, A., Picard, D., & Fafard, M. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.01.026 · Cited by 88
Brough, A. R., & Atkinson, A. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00254-4 · Cited by 84
Effect of superplasticisers on the behaviour and properties of alkaline cements
Puertas, F., Palomo, A., Fernández‐Jiménez, A., Izquierdo, J. D., & Granizo, M. L. (2003) · Advances in Cement Research · doi:10.1680/adcr.2003.15.1.23 · Cited by 83
Li, H., Liu, G., & Cao, Y. F. (2014) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2013.06.0216 · Cited by 80
Leong, H. Y., Ong, D. E. L., Sanjayan, J., & Nazari, A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.046 · Cited by 77
Su, H., Xu, J., & Ren, W. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.11.055 · Cited by 74
Red mud as a carbon sink: Variability, affecting factors and environmental significance
Si, C., Ma, Y., & Lin, C. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.11.024 · Cited by 67
Volcano-related materials in concretes: a comprehensive review
Cai, G., Noguchi, T., Degée, H., Zhao, J., & Kitagaki, R. (2016) · Environmental Science and Pollution Research · doi:10.1007/s11356-016-6161-z · Cited by 60
Memon, F. A., Nuruddin, F., Demie, S., & Shafiq, N. (2012) · Cited by 53
INTRODUCING FLY ASH-BASED GEOPOLYMER CONCRETE: MANUFACTURE AND ENGINEERING PROPERTIES
Hardjito, D., & Sumajouw, D. M. J. (2005) · Cited by 50
FEA modelling of fracture toughness of steel fibre-reinforced geopolymer composites
Sanjayan, J., Nazari, A., & Pouraliakbar, H. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.03.029 · Cited by 45
Adsorption of Hg and NO on coal by-products
Rubel, A. M., Andrews, R. J., Gonzalez, R., Groppo, J., & Robl, T. L. (2005) · Fuel · doi:10.1016/j.fuel.2005.01.006 · Cited by 40
Use of silicon carbide sludge to form porous alkali-activated materials for insulating application
Prud’homme, É., Joussein, E., & Rossignol, S. (2015) · The European Physical Journal Special Topics · doi:10.1140/epjst/e2015-02494-7 · Cited by 37
Effect of High-Speed Mixing on Properties of High Calcium Fly Ash Geopolymer Paste
Chindaprasirt, P., Silva, P. D., & Hanjitsuwan, S. (2014) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-014-1217-1 · Cited by 36
Self-compacting geopolymer concretes: Effects of addition of aluminosilicate-rich fines
Kamseu, E., Ponzoni, C., Tippayasam, C., Taurino, R., Chaysuwan, D., Sglavo, V. M., Thavorniti, P., & Leonelli, C. (2016) · Journal of Building Engineering · doi:10.1016/j.jobe.2016.01.004 · Cited by 32
Cited by
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Amran, M., Debbarma, S., & Ozbakkaloglu, T. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.121857 · Cited by 532
Advances in geopolymer materials: A comprehensive review
Cong, P., & Cheng, Y. (2021) · Journal of Traffic and Transportation Engineering (English Edition) · doi:10.1016/j.jtte.2021.03.004 · Cited by 481
Potential applications of geopolymer concrete in construction: A review
Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., & Zeyad, A. M. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00733 · Cited by 481
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Metadata
- Authors
- Amran, Y. H. M., Alyousef, R., Alabduljabbar, H., & El-Zeadani, M.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 251
- Pages
- 119679
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W2996255907
- Cited by
- 901
- References
- 126
- FWCI
- 54.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.