The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approach
Abstract
The purpose of this study is to perform a comparative study of economic cost, environmental impacts, and productivity associated with manufacturing a prefabricated bathroom unit (PBU, L: 1620 mm; W: 1500 mm; H: 2800 mm) via extrusion-based 3D concrete printing (3DCP) and a precast approach, respectively. The scope of this study includes material consumption, electricity expenditure, labor cost/productivity, and installation cycle. The results reveal that a PBU fabricated by 3DCP achieves a reduction of 25.4% in overall cost, 85.9% in CO2 emission, and 87.1% in energy consumption compared to the precast one. 3DCP also realizes a PBU with reduced self-weight (i.e., 26.2% lighter) and higher productivity (i.e., 48.1% improved) compared to the precast one. The above enhancements were found to be ascribed to the formwork-free fabrication in 3DCP. Finally, sensitivity analysis reveals the significance of formwork re-usage to the outcomes and demonstrates the potentials of 3DCP for small batches or customized manufacturing of PBUs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sustainability in the construction industry: A review of recent developments based on LCA
Ortiz, O., Castells, F., & Sonnemann, G. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.11.012 · Cited by 1,340
Zabalza Bribián, I., Valero Capilla, A., & Aranda Usón, A. (2011) · Building and Environment · doi:10.1016/j.buildenv.2010.12.002 · Cited by 1,287
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Vision of 3D printing with concrete — Technical, economic and environmental potentials
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.001 · Cited by 1,072
Chen, C., Habert, G., Bouzidi, Y., & Jullien, A. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.12.014 · Cited by 718
Miller, F. P., Vandome, A. F., & McBrewster, J. (2009) · Alphascript Pub. eBooks · Cited by 706
The cost of additive manufacturing: machine productivity, economies of scale and technology-push
Baumers, M., Dickens, P., Tuck, C., & Hague, R. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.02.015 · Cited by 658
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
Chen, C., Habert, G., Bouzidi, Y., Jullien, A., & Ventura, A. (2010) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2010.04.001 · Cited by 566
García de Soto, B., Agustí-Juan, I., Hunhevicz, J., Joss, S., Graser, K., Habert, G., & Adey, B. T. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.04.004 · Cited by 474
Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2013-0067 · Cited by 431
Understanding effects of BIM on collaborative design and construction: An empirical study in China
Liu, Y., van Nederveen, S., & Hertogh, M. (2017) · International Journal of Project Management · doi:10.1016/j.ijproman.2016.06.007 · Cited by 411
Comparative life cycle assessment of reactive MgO and Portland cement production
Ruan, S., & Unluer, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.07.071 · Cited by 383
Self-citationMethod of formulating geopolymer for 3D printing for construction applications
Xia, M., & Sanjayan, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.136 · Cited by 359
Ghaffar, S. H., Corker, J., & Fan, M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.05.005 · Cited by 358
Interdependence in supply chains and projects in construction
Bankvall, L., Bygballe, L. E., Dubois, A., & Jahre, M. (2010) · Supply Chain Management: An International Journal · doi:10.1108/13598541011068314 · Cited by 253
Ma, C., Long, G., Shi, Y., & Xie, Y. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.060 · Cited by 253
Agustí-Juan, I., Müller, F., Hack, N., Wangler, T., & Habert, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.002 · Cited by 246
Construction productivity: Issues encountered by contractors in Singapore
Lim, E., & Alum, J. (1995) · International Journal of Project Management · doi:10.1016/0263-7863(95)95704-h · Cited by 241
Implementation of best available techniques in cement manufacturing: a life-cycle assessment study
Valderrama, C., Granados, R., Cortina, J. L., Gasol, C. M., Guillem, M., & Josa, A. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.11.055 · Cited by 220
Pan, M., Linner, T., Pan, W., Cheng, H., & Bock, T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.02.053 · Cited by 187
Weng, Y., Lu, B. H., Li, M., Liu, Z., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.039 · Cited by 158
Self-citationRuffo, M., & Hague, R. (2007) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/09544054jem894 · Cited by 152
Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
Weng, Y., Ruan, S., Li, M., Mo, L., Unluer, C., Tan, M. J., & Qian, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.053 · Cited by 141
Self-citationKastiukas, G., Ruan, S., Liang, S., & Zhou, X. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120290 · Cited by 122
Self-citationLiu, H., Sydora, C., Altaf, M. S., Han, S., & Al‐Hussein, M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.07.055 · Cited by 114
Ma, G., Li, Y. F., Li, W., Zhang, J., & Li, Z. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117982 · Cited by 91
A neural network-based build time estimator for layer manufactured objects
Angelo, L. D., & Stefano, P. D. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3284-8 · Cited by 87
Wu, P., Low, S. P., & Jin, X. (2013) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2013.09.013 · Cited by 72
Comparative life cycle assessment of conventional and new fused magnesia production
Li, J., Zhang, Y., Shao, S., & Zhang, S. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.12.043 · Cited by 61
Cited by
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Rapid digital light 3D printing enabled by a soft and deformable hydrogel separation interface
Wu, J., Guo, J., Linghu, C., Lu, Y., Song, J., Xie, T., & Zhao, Q. (2021) · Nature Communications · doi:10.1038/s41467-021-26386-6 · Cited by 109
Metadata
- Authors
- Weng, Y., Li, M., Ruan, S., Wong, T. N., Tan, M. J., Ow Yeong, K. L., & Qian, S.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 261
- Pages
- 121245
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3012977463
- Cited by
- 305
- References
- 30
- FWCI
- 15.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.