The DOI matches its Crossref record; 878 of the 878 references it cites were found in a registry or an index.
The past and future of sustainable concrete: A critical review and new strategies on cement-based materials
Abstract
The negative impacts of cement-based material (CBM) production are way bigger than ever expected. To illustrate the scale of this phenomenon, all the forests in the world, regardless of the fact that they are disappearing at an alarming rate, are not enough to offset even half the environmental impact (EI) of global aggregates and cement production. Thus, it is necessary to promote scientific research and guide more researchers and professionals in the construction industry to investigate the undiscovered sustainability paths, namely for concrete before and after end-of-life. For that purpose, a global and extensive review is made here to provide an overall view of concrete sustainability in all possible paths. Then, each path is organized as follows: (i) brief introduction, (ii) presentation of non-traditional materials and techniques that can be used for the selected strategy, (iii) their limitations and (iv) future trends. The study also identifies what is already known to avoid putting valuable research resources into redundant scientific studies. The following paths of concrete production sustainability were identified: mix composition (e.g. reduce the EI and resources use of binders, aggregates, water and reinforcement), materials manufacturing (e.g. new production techniques of cement, aggregates and steel bars), concrete mixing (e.g. mixer type and mixing method), on-site application (e.g. regular casting and digital concrete/3D printing), and in-service performance (e.g. increase the durability of reinforced concrete and carbon capture and thermal conductivity). On most of these paths, many studies have been made on the same non-traditional materials and techniques and similar outputs were obtained. Yet, many other non-traditional materials and techniques have not been explored before, or are incomplete in terms of the characteristics analysed. More than providing definite solutions, this contribution intends to open the minds of the readers to the vastly unexplored world of “green concrete”.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Items 601–800 of 878
Effects of POFA replaced with FA on durability properties of GBFS included alkali activated mortars
Huseien, G. F., Tahir, M. M., Mirza, J., Ismail, M., Shah, K. W., & Asaad, M. A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.166 · Cited by 119
Nanomaterials and Nanotechnology for High-Performance Cement Composites
Соболев, К., Flores, I., Hermosillo, R., et al. (2008) · Cited by 119
Khoathane, M. C., Vorster, O. C., & Sadiku, E. R. (2008) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684407086325 · Cited by 118
Li, Z., Han, B., Yu, X., Dong, S., Zhang, L., Dong, X., & Ou, J. (2017) · Materials Research Express · doi:10.1088/2053-1591/aa87db · Cited by 118
The influence of moisture content on the thermal conductivity of external thermal mortars
Gomes, M. G., Flores‐Colen, I., Manga, L. M., Soares, A., & de Brito, J. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.166 · Cited by 116
Hooton, R. D. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105827 · Cited by 116
Kurda, R., de Brito, J., & Silvestre, J. D. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101173 · Cited by 116
Self-citationA review on bricks and stabilized compressed earth blocks
Deboucha, S., & Hashim, R. (2011) · The University of Malaya Research Repository (University of Malaya) · doi:10.5897/sre09.356 · Cited by 115
Wall, T. F., Stanger, R. J., & Santos, S. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.03.014 · Cited by 114
Waste management issues for the UK ready-mixed concrete industry
Sealey, B. J., Phillips, P. S., & Hill, G. (2001) · Resources Conservation and Recycling · doi:10.1016/s0921-3449(01)00069-6 · Cited by 114
Carbonation of concrete structures and decomposition of CSH
Kobayashi, K., Suzuki, K., & Uno, Y. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90082-5 · Cited by 113
Weil, M., Jeske, U., & Schebek, L. (2006) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x06063686 · Cited by 113
Gesoğlu, M., Güneyisi, E., Mahmood, S. F., et al. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.08.013 · Cited by 113
Superhydrophobic rice husk ash coating on concrete
Husni, H., Nazari, M. R., Yee, H. M., Rohim, R., Yusuff, A., Ariff, M. A. M., Ahmad, N. N. R., Leo, C. P., & Junaidi, M. U. M. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.078 · Cited by 113
Environmental evaluation of concrete with sewage sludge ash based on LCA
Nakić, D. (2018) · Sustainable Production and Consumption · doi:10.1016/j.spc.2018.08.003 · Cited by 113
Characteristics of the carbonation resistance of recycled fine aggregate concrete
Geng, J., & Sun, J. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.08.090 · Cited by 112
Calcium addition in straw gasification☆
Risnes, H., Fjellerup, J., Henriksen, U. B., Moilanen, A., Norby, P., Papadakis, K., Posselt, D., & Sørensen, L. H. (2003) · Fuel · doi:10.1016/s0016-2361(02)00337-x · Cited by 112
Tripathi, R. D., Vajpayee, P., Singh, N., Rai, U. N., Kumar, A., Ali, M. B., Kumar, B., & Yunus, M. (2003) · Chemosphere · doi:10.1016/j.chemosphere.2003.09.043 · Cited by 112
Said, M., Adam, M. A., Mahmoud, A. A., & Shanour, A. S. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.185 · Cited by 112
Geopolymers and Their Uses: Review
Burduhos-Nergiș, D. D., Abdullah, M. M. A. B., Vizureanu, P., & Tahir, M. F. M. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/374/1/012019 · Cited by 112
Autogenous Self-Healing: A Better Solution for Concrete
Rajczakowska, M., Habermehl-Cwirzen, K., Hedlund, H., et al. (2019) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002764 · Cited by 112
Life Cycle Assessment of a high temperature molten salt concentrated solar power plant
Piemonte, V., Falco, M. D., Tarquini, P., & Giaconia, A. (2011) · Solar Energy · doi:10.1016/j.solener.2011.03.002 · Cited by 111
Baite, E., Messan, A., Hannawi, K., Tsobnang, F., & Prince, W. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.117 · Cited by 111
Bravo, M., de Brito, J., Evangelista, L., & Pacheco, J. N. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.176 · Cited by 111
Properties of lightweight concrete
Newman, J., & Owens, P. (2003) · Elsevier eBooks · doi:10.1016/b978-075065686-3/50288-3 · Cited by 110
Global normalisation factors for the Environmental Footprint and Life Cycle Assessment
Sala, S., Crenna, E., Secchi, M., & Pant, R. (2017) · Joint Research Centre (European Commission) · doi:10.2760/88930 · Cited by 110
Eco-friendly utilization of corncob ash as partial replacement of sand in concrete
Memon, S. A., Javed, U., & Khushnood, R. A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.063 · Cited by 110
A short manual on natural pumice as a lightweight aggregate
Rashad, A. M. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.100802 · Cited by 110
Karthik, S., Rao, P. R. M., & Awoyera, P. O. (2017) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2016.12.003 · Cited by 109
Gomes, M. G., Flores‐Colen, I., da Silva, F., & Pedroso, M. F. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.162 · Cited by 109
Development of robust CaO-based sorbents from blast furnace slag for calcium looping CO2 capture
Yasipourtehrani, S., Tian, S., Strezov, V., Kan, T., & Evans, T. J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124140 · Cited by 109
Deng, L., & Adams II, T. A. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112315 · Cited by 108
Xu, Y., & Chung, D. D. L. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00296-9 · Cited by 108
Ferone, C., Colangelo, F., Messina, F., Santoro, L., & Cioffi, R. (2013) · Materials · doi:10.3390/ma6083420 · Cited by 108
Silva, R. V., de Brito, J., & Dhir, R. K. (2015) · Engineering Structures · doi:10.1016/j.engstruct.2015.06.004 · Cited by 108
Huang, G., Ji, Y., Zhang, L., Li, J., & Hou, Z. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.07.224 · Cited by 108
Life cycle assessment (LCA) and cost (LCC) studies of lightweight composite flooring systems
Ahmed, I. M., & Tsavdaridis, K. D. (2018) · Journal of Building Engineering · doi:10.1016/j.jobe.2018.09.013 · Cited by 108
(2003) · TNO Repository · Cited by 108
High-performance concrete with recycled stone slurry
Almeida, N., Branco, F. A. B., de Brito, J., & dos Santos, J. R. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.11.003 · Cited by 107
Rashad, A. M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.09.018 · Cited by 107
Martinez-Lopez, R., & Escalante-Garcia, J. I. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.064 · Cited by 107
Djobo, J. N. Y., Elimbi, A., Manga, J. D., & Ndjock, I. B. D. L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.104 · Cited by 105
An investigation on thermal conductivity of fly ash concrete after elevated temperature exposure
Wang, W., Lu, C., Li, Y., & Li, Q. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.068 · Cited by 105
New classification of CO2 mineralization processes and economic evaluation
Naraharisetti, P. K., Yeo, T. Y., & Bu, J. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.10.008 · Cited by 105
Flexural analysis and design of stainless steel reinforced concrete beams
Rabi, M., Cashell, K. A., & Shamass, R. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.109432 · Cited by 105
Virgin volcanic rocks: Kinetics and equilibrium studies for the adsorption of cadmium from water
Alemayehu, E., & Lennartz, B. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.03.109 · Cited by 104
Thermal conductivity of newspaper sandwiched aerated lightweight concrete panel
Ng, S.-C., & Low, K.-S. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.08.026 · Cited by 104
Development of novel absorbents for CO2 capture from blast furnace gas
Goto, K., Okabe, H., Chowdhury, F. A., Shimizu, S., Fujioka, Y., & Onoda, M. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.06.006 · Cited by 104
Bui, N. K., Satomi, T., & Takahashi, H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.325 · Cited by 104
Development of a CO2 solidification method for recycling autoclaved lightweight concrete waste
Liu, L., Ha, J., Hashida, T., & Teramura, S. (2001) · Journal of Materials Science Letters · doi:10.1023/a:1012591318077 · Cited by 103
Belhadj, B., Bédérina, M., Montrelay, N., Houessou, K. J., & Queneudec, M. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.090 · Cited by 103
Energy and mining – the home truths
Levesque, M., Millar, D. L., & Paraszczak, J. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.12.088 · Cited by 103
Kurda, R., de Brito, J., & Silvestre, J. D. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.11.004 · Cited by 103
Self-citationA carbonation prediction model for accelerated carbonation testing of concrete
Loo, Y. H., Chin, M. S., Tam, C. T., & Ong, K. C. G. (1994) · Magazine of Concrete Research · doi:10.1680/macr.1994.46.168.191 · Cited by 102
Self-Healing Coatings for Steel-Reinforced Concrete
Chen, Y., Xia, C., Shepard, Z. J., Smith, N., Rice, N. P., Peterson, A. M., & Sakulich, A. R. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03142 · Cited by 102
Valorisation of wood fly ash on concrete
Teixeira, E., Camões, A. F., & Branco, F. G. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.028 · Cited by 102
Concrete carbonation as influenced by curing regime
Fattuhi, N. I. (1988) · Cement and Concrete Research · doi:10.1016/0008-8846(88)90076-2 · Cited by 101
Separability studies of construction and demolition waste recycled sand
Ulsen, C., Kahn, H., Hawlitschek, G., Masini, E. A., & Angulo, S. C. (2012) · Waste Management · doi:10.1016/j.wasman.2012.06.018 · Cited by 101
The effect of self-healing hollow fibres on the mechanical properties of polymer composites
Kousourakis, A., & Mouritz, A. P. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/8/085021 · Cited by 101
Hygrothermal performance of hempcrete for Ontario (Canada) buildings
Dhakal, U., Berardi, U., Gorgolewski, M., & Richman, R. C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.102 · Cited by 101
Li, B., Shi, B., Zhao, X., Ma, K., Xie, D., Zhao, D., & Li, J. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2017.09.001 · Cited by 101
Chloride ion penetration into fly ash modified concrete during wetting–drying cycles
Simčič, T., Pejovnik, S., Schutter, G. D., & Bosiljkov, V. B. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.04.033 · Cited by 100
Prediction of Chloride Ion Penetration of Recycled Aggregate Concrete
Silva, R. V., de Brito, J., Neves, R. D., & Dhir, R. K. (2015) · Materials Research · doi:10.1590/1516-1439.000214 · Cited by 100
Sarkar, M., Adak, D., Tamang, A., Chattopadhyay, B., & Mandal, S. (2015) · RSC Advances · doi:10.1039/c5ra20858k · Cited by 100
Mo, L., Zhang, F., Deng, M., & Panesar, D. K. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.03.013 · Cited by 100
Building Research Establishment, BRE
Crump, D. (2005) · Cited by 100
de Larrard, T., Benboudjema, F., Colliat, J. B., Torrenti, J., & Deleruyelle, F. (2010) · Computational Materials Science · doi:10.1016/j.commatsci.2010.04.017 · Cited by 99
Joseph, G., & Ramamurthy, K. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.09.018 · Cited by 98
Ramachandran, R., Кожухова, М., Соболев, К., & Nosonovsky, M. (2016) · Entropy · doi:10.3390/e18040132 · Cited by 98
Environmentally Friendly Utilization of Wheat Straw Ash in Cement-Based Composites
Memon, S. A., Wahid, I., Khan, M. K., Tanoli, M. A., & Bimaganbetova, M. (2018) · Sustainability · doi:10.3390/su10051322 · Cited by 98
Optimal Use of MSWI Bottom Ash in Concrete
Zhang, T., & Zhao, Z. (2014) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-014-0073-4 · Cited by 97
Design and properties of a new sustainable construction material based on date palm fibers and lime
Belakroum, R., Gherfi, A., Kadja, M., et al. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.196 · Cited by 97
Rathnayake, M., Julnipitawong, P., Tangtermsirikul, S., & Toochinda, P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.204 · Cited by 97
Effect of moisture and porosity on the thermal properties of a conventional refractory concrete
dos Santos, W. N. (2002) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(02)00158-9 · Cited by 96
Blengini, G. A., Garbarino, E., Šolar, S. V., Shields, D. J., Hámor, T., Vinai, R., & Agioutantis, Z. G. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.01.020 · Cited by 96
Influence of grey water on physical and mechanical properties of mortar and concrete mixes
Ghrair, A. M., Al‐Mashaqbeh, O., Sarireh, M., Al-Kouz, N., Farfoura, M. E., & Megdal, S. B. (2016) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2016.11.005 · Cited by 96
Kurda, R., Silvestre, J. D., de Brito, J., & Ahmed, H. H. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.177 · Cited by 95
Self-citationShakor, P., Nejadi, S., Paul, G., & Sanjayan, J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.102964 · Cited by 95
Chemically and Thermally Treated Vegetable Fibers for Reinforcement of Cement-Based Composites
Arsène, M.-A., Okwo, A., Bilba, K., Soboyejo, A. B. O., & Soboyejo, W. O. (2007) · Materials and Manufacturing Processes · doi:10.1080/10426910601063386 · Cited by 94
Enhancing process kinetics for mineral carbon sequestration
Krevor, S. C., & Lackner, K. S. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.02.315 · Cited by 94
Chloride penetration and carbonation in concrete with rice husk ash and chemical activators
Gastaldini, A. L. G., Isaia, G. C., Gomes, N. S., & Sperb, J. E. K. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.11.010 · Cited by 94
Bio-reinforced self-healing concrete using magnetic iron oxide nanoparticles
Seifan, M., Sarmah, A. K., Ebrahiminezhad, A., Ghasemi, Y., Samani, A. K., & Berenjian, A. (2018) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-018-8782-2 · Cited by 94
Fang, X., Zhan, B., & Poon, C. S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.117810 · Cited by 93
Göswein, V., Gonçalves, A. B., Silvestre, J. D., Freire, F. M. C. S., Habert, G., & Kurda, R. (2018) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2018.05.021 · Cited by 92
Self-citationRole of Carbonation in Transient Leaching of Cementitious Wasteforms
Walton, J. C., Bin‐Shafique, S., Smith, R. W., Gutierrez, N., & Tarquin, A. J. (1997) · Environmental Science & Technology · doi:10.1021/es960964j · Cited by 89
Freeze‐Thaw Durability of Air‐Entrained Concrete
Shang, H., & Yi, T. (2013) · The Scientific World JOURNAL · doi:10.1155/2013/650791 · Cited by 87
Bond of GFRP Bars in Concrete: Experimental Study and Analytical Interpretation
Tastani, S. P., & Pantazopoulou, S. J. (2006) · Journal of Composites for Construction · doi:10.1061/(asce)1090-0268(2006)10:5(381 · Cited by 87
The incorporation of oil palm ash in concrete as a means of recycling: A review
Al-Mulali, M. Z., Awang, H., Khalil, H. P. S. A., & Aljoumaily, Z. S. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.007 · Cited by 86
Chung, S.-Y., Han, T., Kim, S. Y., Kim, J.-H. J., Youm, K. S., & Lim, J.-H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2015.10.011 · Cited by 85
Coclite, A. M., Shi, Y. J., & Gleason, K. K. (2012) · Advanced Materials · doi:10.1002/adma.201200682 · Cited by 85
Ramezanianpour, A. A., Kazemian, A., Sarvari, M., & Ahmadi, B. (2012) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000621 · Cited by 85
Microstructure and mechanical performance of modified mortar using hemp fibres and carbon nanotubes
Hamzaoui, R., Guessasma, S., Mecheri, B., Eshtiaghi, A. M., & Bennabi, A. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.10.084 · Cited by 85
Hu, X., Tang, C., He, Z., Shao, H., Xu, K., Mei, J., & Lau, W. (2017) · Small · doi:10.1002/smll.201602353 · Cited by 85
Corn stalk from agricultural residue used as reinforcement fiber in fiber-cement production
Jarabo, R., Monte, M. C., Fuente, E., dos Santos, S. F., & Negro, C. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.08.034 · Cited by 84
A review of self-healing concrete research development
Hussin, M. W., Majid, M. Z. A., Zin, R. M., Fulazzaky, M. A., Shafaghat, A., Lee, C. T., Keyvanfar, A., Talaiekhozani, A., Andalib, R., Hamzah, N., et al. (2014) · Journal of Environmental Treatment Techniques · Cited by 84
Clinkering and hydration of belite-alite-ye´elimite cement
Londoño-Zuluaga, D., Tobón, J. I., Aranda, M. Á. G., Santacruz, I., & la Torre, Á. G. D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.04.002 · Cited by 83
Smart Crack Control in Concrete through Use of Phase Change Materials (PCMs): A Review
Šavija, B. (2018) · Materials · doi:10.3390/ma11050654 · Cited by 83
Recycled polycarbonate from electronic waste and its use in concrete: Effect of irradiation
Martínez, A. L. D. L. C., Martínez‐Barrera, G., Barrera-Díaz, C., Córdoba, L. I. Á., Ureña‐Núñez, F., & Delgado-Hernández, D. J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.147 · Cited by 83
Effects on Mechanical Properties of Recycled PET in Cement-Based Composites
Córdoba, L. I. Á., Martínez‐Barrera, G., Barrera-Díaz, C., Ureña‐Núñez, F., & Yáñez, A. L. (2013) · International Journal of Polymer Science · doi:10.1155/2013/763276 · Cited by 82
Enhancement of high temperature performance of cement blocks via CO2 curing
Meng, Y., Ling, T., Mo, K. H., & Tian, W. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.03.411 · Cited by 82
Vijayaraghavan, J., Jude, A., & Thivya, J. (2017) · Resources Policy · doi:10.1016/j.resourpol.2017.06.012 · Cited by 81
Aguayo, M., Das, S., Castro, C. M. J., Kabay, N., Sant, G., & Neithalath, N. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.185 · Cited by 80
Pulp and Paper Mill Fly Ash: A Review
Cherian, C., & Siddiqua, S. (2019) · Sustainability · doi:10.3390/su11164394 · Cited by 80
Thermal analysis of a new modular system for green walls
Manso, M., & Castro-Gomes, J. P. (2016) · Journal of Building Engineering · doi:10.1016/j.jobe.2016.03.006 · Cited by 79
Mora, E., González, G., Romero, P., et al. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.06.086 · Cited by 79
Dynamics of the internal reaction layer arising during carbonation of concrete
Meier, S., Peter, M. A., Muntean, A., & Böhm, M. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.11.014 · Cited by 78
Eggshell as a partial cement replacement in concrete development
Tan, Y. Y., Doh, S. I., & Chin, S. C. (2018) · Magazine of Concrete Research · doi:10.1680/jmacr.17.00003 · Cited by 78
Sigvardsen, N. M., Kirkelund, G. M., Jensen, P. E., Geiker, M. R., & Ottosen, L. M. (2019) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.034 · Cited by 78
Maravelaki-Kalaitzaki, P., Agioutantis, Z. G., Lionakis, E., Stavroulaki, M. E., & Perdikatsis, V. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.07.002 · Cited by 77
Pehlivanlı, Z. O., Üzün, I., Yücel, Z. P., et al. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.223 · Cited by 77
Potential for energy savings by heat recovery in an integrated steel supply chain
McBrien, M., Serrenho, A. C., & Allwood, J. M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.04.099 · Cited by 77
Thermal And Mechanical Properties Of Basalt Fibre Reinforced Concrete
Tumadhir, M., & Borhan (2013) · Zenodo (CERN European Organization for Nuclear Research) · doi:10.5281/zenodo.1058276 · Cited by 77
Sorptivity of fly ash concretes
Gopalan, M. K. (1996) · Cement and Concrete Research · doi:10.1016/0008-8846(96)00105-6 · Cited by 76
Concrete containing ternary blended binders: Resistance to chloride ingress and carbonation
Jones, M. R., Dhir, R. K., & Magee, B. (1997) · Cement and Concrete Research · doi:10.1016/s0008-8846(97)00075-6 · Cited by 76
Huang, G., Ji, Y., Li, J., Zhang, L., Liu, X., & Liu, B. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.125 · Cited by 75
Hafez, H., Kurda, R., Cheung, W. M., & Nagaratnam, B. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118722 · Cited by 75
Self-citationPressed lightweight concrete containing calcined diatomite aggregate
Posi, P., Lertnimoolchai, S., Sata, V., & Chindaprasirt, P. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.094 · Cited by 74
Multi-scale composite models for the effective thermal conductivity of PCM-concrete
Meshgin, P., & Xi, Y. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.06.068 · Cited by 73
Yang, D., Fan, L., Shi, F., Liu, Q., & Wang, Y. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.06.017 · Cited by 73
Nguyen, L. H., Beaucour, A., Ortola, S., & Noumowe, A. N. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.06.087 · Cited by 73
Stability of ternesite and the production at scale of ternesite-based clinkers
Hanein, T., Galán, I., Glasser, F. P., Skalamprinos, S., Elhoweris, A., Imbabi, M. S., & Bannerman, M. N. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.04.010 · Cited by 72
Life‐Cycle Assessment of High‐Strength Concrete Mixtures with Copper Slag as Sand Replacement
Gursel, A. P., & Ostertag, C. P. (2019) · Advances in Civil Engineering · doi:10.1155/2019/6815348 · Cited by 72
Thermal conductivity of ternary mixtures for concrete pavements
Shin, A. H.-C., & Kodide, U. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.11.009 · Cited by 71
Porosity, gas permeability, carbonation and their interaction in high-volume fly ash concrete
Lammertijn, S., & Belie, N. D. (2008) · Magazine of Concrete Research · doi:10.1680/macr.2008.60.7.535 · Cited by 71
Sludge Ash as Fine Aggregate for Concrete Mix
Khanbilvardi, R. M., & Afshari, S. (1995) · Journal of Environmental Engineering · doi:10.1061/(asce)0733-9372(1995)121:9(633 · Cited by 71
Utilization of sludge from ready-mixed concrete plants as a substitute for limestone fillers
Audo, M., Mahieux, P.-Y., & Turcry, P. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.044 · Cited by 71
Seifan, M., Ebrahiminezhad, A., Ghasemi, Y., Samani, A. K., & Berenjian, A. (2017) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-017-8611-z · Cited by 71
Effects of mineral powders on hydration process and hydration products in normal strength concrete
Tikkanen, J., Ćwirzeń, A., & Penttala, V. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.08.066 · Cited by 70
Electrolysis and heat pretreatment methods to promote CO2 sequestration by mineral carbonation
Li, W., Li, B., Li, B., & Bai, Z. (2008) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2008.08.001 · Cited by 70
Statistical evaluation of the mechanical properties of high-volume class F fly ash concretes
Yoon, S., Monteiro, P. J. M., Macphee, D. E., Glasser, F. P., & Imbabi, M. S. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.12.077 · Cited by 70
Natural fibres as construction materials
Ali, M. (2012) · Journal of Civil Engineering and Construction Technology · doi:10.5897/jcect11.100 · Cited by 70
One-part alkali activated cement based volcanic pumice
Almalkawi, A. T., Hamadna, S., & Soroushian, P. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.06.139 · Cited by 70
Mechanical Characterization of Concrete Reinforced with Different Types of Carbon Nanotubes
Hawreen, A., Bogas, J. A., & Kurda, R. (2019) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-019-04096-y · Cited by 70
Self-citationEnvironmental Effects on the Mechanical Properties of E-Glass FRP Rebars
Tannous, F. E., & Saadatmanesh, H. (1998) · ACI Materials Journal · doi:10.14359/354 · Cited by 69
Tiruta-Barna, L., Benetto, E., & Perrodin, Y. (2007) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2007.01.009 · Cited by 69
Strength Characteristics of High-Volume Fly Ash–Based Recycled Aggregate Concrete
Saravanakumar, P., & Dhinakaran, G. (2012) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000645 · Cited by 69
Zhao, J. S., Li, G., Wang, Z., & Zhao, X. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.111427 · Cited by 69
Brunauer, S., & Copeland, L. E. (1964) · Scientific American · doi:10.1038/scientificamerican0464-80 · Cited by 69
Research on autogenous volume deformation of concrete with MgO
Gao, P., Xu, S., Xiong, C., Li, J., & Lu, X.-L. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.11.025 · Cited by 68
(2017) · doi:10.1007/978-3-319-48281-1 · Cited by 68
Separation studies of concrete and brick from construction and demolition waste
Hu, K., Chen, Y., Naz, F., Zeng, C., & Cao, S. (2019) · Waste Management · doi:10.1016/j.wasman.2019.01.007 · Cited by 68
Celitement - a sustainable prospect for the cement industry
Stemmermann, P., Schweike, U., Garbev, K., Beuchle, G., & Møller, H. (2010) · Cited by 68
Yellishetty, M., Ranjith, P. G., Tharumarajah, A., & Bhosale, S. V. (2009) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-009-0060-1 · Cited by 67
Characterization of heavy metals in fly ash from municipal solid waste incinerators in Shanghai
Haiying, Z., Youcai, Z., & Jingyu, Q. (2010) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2010.01.001 · Cited by 67
Influence of pretreatment of rice straw on hydration of straw fiber filled cement based composites
Xie, X., Gou, G., Wei, X., Zhou, Z., Jiang, M., Xu, X., Wang, Z., & Hui, D. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.088 · Cited by 67
Williams, S. L., Kirisits, M. J., & Ferron, R. D. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.155 · Cited by 67
Life cycle analysis of a new modular greening system
Manso, M., Castro-Gomes, J. P., Paulo, B., Bentes, I., & Teixeira, C. A. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.01.198 · Cited by 67
Ahmed, H. H., Bogas, J. A., & Guedes, M. (2018) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0002470 · Cited by 67
Combining hydration and carbonation of cement using super-saturated aqueous CO2 solution
Lippiatt, N. R., Ling, T., & Eggermont, S. G. F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116825 · Cited by 67
A Systematic Review of the Discrepancies in Life Cycle Assessments of Green Concrete
Hafez, H., Kurda, R., Cheung, W. M., & Nagaratnam, B. (2019) · Applied Sciences · doi:10.3390/app9224803 · Cited by 67
Self-citationDigging the backyard: Mining and quarrying in the UK and their impact on future land use
Bloodworth, A. J., Scott, P. W., & McEvoy, F. (2009) · Land Use Policy · doi:10.1016/j.landusepol.2009.08.022 · Cited by 66
Chabannes, M., Nozahic, V., & Amziane, S. (2014) · Materials and Structures · doi:10.1617/s11527-014-0276-9 · Cited by 65
Link, T., Bellmann, F., Ludwig, H., & Haha, M. B. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.08.009 · Cited by 65
Kurda, R., de Brito, J., & Silvestre, J. D. (2017) · Magazine of Concrete Research · doi:10.1680/jmacr.17.00216 · Cited by 65
Self-citationA shape memory polymer concrete crack closure system activated by electrical current
Teall, O., Pilegis, M., Davies, R., Sweeney, J., Jefferson, T., Lark, R. J., & Gardner, D. R. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aac28a · Cited by 64
Strength of Lightweight Glass Aggregate Concrete
Nemes, R., & Józsa, Z. (2006) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2006)18:5(710 · Cited by 63
Li, R., Zhang, B., Wang, Y., Zhao, Y., & Li, F. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.11.036 · Cited by 63
A Study of Concrete Made with Fine and Coarse Aggregates Recycled from Fresh Concrete Waste
Serifou, M. A., Sbartaï, Z. M., Yotte, S., et al. (2013) · Journal of Construction Engineering · doi:10.1155/2013/317182 · Cited by 61
Maria, F. D., Bianconi, F., Micale, C., Baglioni, S., & Marionni, M. (2015) · Waste Management · doi:10.1016/j.wasman.2015.12.005 · Cited by 61
Sustainable Construction: Use of recycled concrete aggregate
Dhir, R. K., Henderson, N., & Limbachiya, M. (1998) · Research Repository (Kingston University London) · Cited by 60
Permeability study on the cement based solidification process for the disposal of hazardous wastes
Poon, C. S., Clark, A. I., Perry, R., Barker, A. P., & Barnes, P. (1986) · Cement and Concrete Research · doi:10.1016/0008-8846(86)90132-8 · Cited by 60
Pastor, J. M., García, L. D., Quintana, S., & Peña, J. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.12.040 · Cited by 60
Alite-belite-ye'elimite cements: Effect of dopants on the clinker phase composition and properties
Zea-García, J. D., Santacruz, I., Aranda, M. Á. G., & la Torre, Á. G. D. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.019 · Cited by 60
Mineral CO2 sequestration by environmental biotechnological processes
Salek, S. S., Kleerebezem, R., Jonkers, H. M., Witkamp, G.-J., & van Loosdrecht, M. C. M. (2013) · Trends in biotechnology · doi:10.1016/j.tibtech.2013.01.005 · Cited by 59
Reducing the drying shrinkage of cement paste by admixture surface treatments
Xu, Y., & Chung, D. D. L. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(99)00239-2 · Cited by 59
Ozbakkaloglu, T., Gu, L., & Pour, A. F. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.015 · Cited by 59
Bundur, Z. B., Bae, S., Kirisits, M. J., & Ferron, R. D. (2017) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001838 · Cited by 59
Khushnood, R. A., Rizwan, S. A., Memon, S. A., Tulliani, J., & Ferro, G. A. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/832508 · Cited by 58
Use of Heat‐Treated Water Treatment Residuals in Fly Ash‐Based Geopolymers
Guo, X., Shi, H., & Dick, W. A. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03331.x · Cited by 58
Mors, R. M., & Jonkers, H. M. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.10.037 · Cited by 58
Study of a hempcrete wall exposed to outdoor climate: Effects of the coating
Piot, A., Béjat, T., Jay, A., Bessette, L., Wurtz, É., & Barnes-Davin, L. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.143 · Cited by 58
Thermo-mechanical properties of fiber reinforced raw perlite concrete
Gül, R., Okuyucu, E., Türkmen, İ., & Aydın, A. C. (2007) · Materials Letters · doi:10.1016/j.matlet.2007.04.050 · Cited by 57
The performance of a 12% chromium steel in concrete in severe marine environments
Callaghan, B. G. (1993) · Corrosion Science · doi:10.1016/0010-938x(93)90381-p · Cited by 57
Properties of masonry blocks produced with waste limestone sawdust and glass powder
Turğut, P. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.04.008 · Cited by 57
Corrosion behaviour of stainless steel reinforcement in concrete
Lollini, F., Carsana, M., Gastaldi, M., & Redaelli, E. (2018) · Corrosion Reviews · doi:10.1515/corrrev-2017-0088 · Cited by 57
Use of non-wood biomass combustion ash in development of alkali-activated concrete
Matalkah, F., Soroushian, P., Abideen, S. U., & Peyvandi, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.023 · Cited by 55
Corrosion of Steel in Concrete
Bentur, A. (1997) · CRC Press eBooks · doi:10.1201/9781482271898-7 · Cited by 55
Blustein, G., Romagnoli, R., Jaén, J. A., Sarli, A. R. D., & del Amo, B. (2006) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.04.043 · Cited by 54
Sanit-in, P. K., Abdulmatin, A., Tangchirapat, W., & Jaturapitakkul, C. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.145 · Cited by 54
Cantero, B., del Bosque, I. F. S., Matías, A., de Rojas, M. I. S., & Medina, C. (2019) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2019.08.004 · Cited by 54
Yoo, S.-W., Ryu, G.-S., & 추진교Choo, J. F. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.021 · Cited by 53
The influence of sodium hydrogen carbonate on the hydration of cement
Jang, J. G., Kim, H.-J., Park, S., et al. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.121 · Cited by 53
Synthesis and hydration of alite-calcium sulfoaluminate cement
Chitvoranund, N., Winnefeld, F., Hargis, C. W., Sinthupinyo, S., & Lothenbach, B. (2016) · Advances in Cement Research · doi:10.1680/jadcr.16.00071 · Cited by 53
Zhu, W., Chen, X., Zhao, A., Struble, L. J., & Yang, E. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.295 · Cited by 53
Dry powder alkali-activated slag cements
Kovtun, M., Kearsley, E. P., & Shekhovtsova, J. (2015) · Advances in Cement Research · doi:10.1680/jadcr.14.00078 · Cited by 51
Donatello, S., Maltseva, O., Fernández‐Jiménez, A., & Palomo, A. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12751 · Cited by 51
Application of SSA as partial replacement of aggregate in concrete
Kosior‐Kazberuk, M. (2011) · Polish Journal of Environmental Studies · Cited by 51
Bundur, Z. B., Kirisits, M. J., & Ferron, R. D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.09.003 · Cited by 50
He, J., & Shi, X. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.041 · Cited by 50
Application of alkali-activated industrial waste
Payá, J., Agrela, F., Rosales, J., Martín-Morales, M., & Borrachero, M. V. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102480-5.00013-0 · Cited by 50
Shi, J., Chen, Z., Shao, S., & Zheng, J. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.02.012 · Cited by 49
Criado, M., Monticelli, C., Fajardo, S., Gelli, D., Grassi, V., & Bastidas, J. M. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.078 · Cited by 49
Performance‐based durability design, carbonation part 2 – Classification of concrete
von Greve‐Dierfeld, S., & Gehlen, C. (2016) · Structural Concrete · doi:10.1002/suco.201600067 · Cited by 49
Pore Structure and Influence of Recycled Aggregate Concrete on Drying Shrinkage
Guo, Y.-C., Qian, J., & Wang, X. (2013) · Mathematical Problems in Engineering · doi:10.1155/2013/912412 · Cited by 48
Usage of air jigging for multi-component separation of construction and demolition waste
Ambrós, W. M., Sampaio, C. H., Cazacliu, B. G., Miltzarek, G. L., & Miranda, L. R. (2016) · Waste Management · doi:10.1016/j.wasman.2016.11.029 · Cited by 48
Suitability of Ambient-Cured Alccofine added Low-Calcium Fly Ash-based Geopolymer Concrete
Jindal, B. B., Jindal, B. B., Singhal, D., Sharma, S. K., & Parveen (2017) · Indian Journal of Science and Technology · doi:10.17485/ijst/2017/v10i12/110428 · Cited by 47
Łach, M., Mierzwiński, D., Korniejenko, K., Mikuła, J., & Hebda, M. (2018) · Journal of the Air & Waste Management Association · doi:10.1080/10962247.2018.1488772 · Cited by 47
Maslehuddin, M., Al-Mana, A. I., Shamim, M., & Saricimen, H. (1989) · ACI Materials Journal · doi:10.14359/1856 · Cited by 46
Jamshidi, A., Kurumisawa, K., Toyoharu, N. A. W. A., & Hamzah, M. O. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.11.046 · Cited by 46
Analysis of corrosion resistance behavior of inhibitors in concrete using electrochemical techniques
Song, H.-W., & Saraswathy, V. (2006) · Metals and Materials International · doi:10.1007/bf03027549 · Cited by 44
Cited by
Miller, S. A., Habert, G., Myers, R. J., & Harvey, J. T. (2021) · One Earth · doi:10.1016/j.oneear.2021.09.011 · Cited by 308
Pathways towards sustainable concrete
Coffetti, D., Crotti, E., Gazzaniga, G., Carrara, M., Pastore, T., & Coppola, L. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106718 · Cited by 274
Scope, C., Guenther, E., Schütz, J., Mielecke, T., Mündecke, E., Schultze, K., & Saling, P. (2020) · Civil Engineering Design · doi:10.1002/cend.202000024 · Cited by 22
Metadata
- Authors
- de Brito, J., & Kurda, R.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 281
- Pages
- 123558
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3086090482
- Cited by
- 436
- References
- 878
- FWCI
- 30.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.