The DOI matches its Crossref record; 878 of the 878 references it cites were found in a registry or an index.
The past and future of sustainable concrete: A critical review and new strategies on cement-based materials
Abstract
The negative impacts of cement-based material (CBM) production are way bigger than ever expected. To illustrate the scale of this phenomenon, all the forests in the world, regardless of the fact that they are disappearing at an alarming rate, are not enough to offset even half the environmental impact (EI) of global aggregates and cement production. Thus, it is necessary to promote scientific research and guide more researchers and professionals in the construction industry to investigate the undiscovered sustainability paths, namely for concrete before and after end-of-life. For that purpose, a global and extensive review is made here to provide an overall view of concrete sustainability in all possible paths. Then, each path is organized as follows: (i) brief introduction, (ii) presentation of non-traditional materials and techniques that can be used for the selected strategy, (iii) their limitations and (iv) future trends. The study also identifies what is already known to avoid putting valuable research resources into redundant scientific studies. The following paths of concrete production sustainability were identified: mix composition (e.g. reduce the EI and resources use of binders, aggregates, water and reinforcement), materials manufacturing (e.g. new production techniques of cement, aggregates and steel bars), concrete mixing (e.g. mixer type and mixing method), on-site application (e.g. regular casting and digital concrete/3D printing), and in-service performance (e.g. increase the durability of reinforced concrete and carbon capture and thermal conductivity). On most of these paths, many studies have been made on the same non-traditional materials and techniques and similar outputs were obtained. Yet, many other non-traditional materials and techniques have not been explored before, or are incomplete in terms of the characteristics analysed. More than providing definite solutions, this contribution intends to open the minds of the readers to the vastly unexplored world of “green concrete”.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Items 201–400 of 878
Kriker, A., Debicki, G., Bali, A., Khenfer, M. M., & Chabannet, M. (2004) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.09.015 · Cited by 374
Qian, S., Zhou, J., de Rooij, M. R., Schlangen, E., Ye, G., & van Breugel, K. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.03.003 · Cited by 373
Factors affecting the thermal properties of concrete and applicability of its prediction models
Khan, M. I. (2002) · Building and Environment · doi:10.1016/s0360-1323(01)00061-0 · Cited by 369
Basalt-based fiber-reinforced materials and structural applications in civil engineering
Monaldo, E., Nerilli, F., & Vairo, G. (2019) · Composite Structures · doi:10.1016/j.compstruct.2019.02.002 · Cited by 368
The influence of the use of recycled aggregates on the compressive strength of concrete: a review
Silva, R. V., de Brito, J., & Dhir, R. K. (2015) · European Journal of Environmental and Civil Engineering · doi:10.1080/19648189.2014.974831 · Cited by 366
Self-citationConcrete with ceramic waste aggregate
Senthamarai, R., & Manoharan, P. D. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2005.04.003 · Cited by 365
Self‐Healing Polymer Coatings Based on Crosslinked Metallosupramolecular Copolymers
Bode, S., Zedler, L., Schacher, F. H., Dietzek, B., Schmitt, M., Popp, J., Hager, M. D., & Schubert, U. S. (2013) · Advanced Materials · doi:10.1002/adma.201203865 · Cited by 364
Influence of the use of recycled concrete aggregates from different sources on structural concrete
Pedro, D., de Brito, J., & Evangelista, L. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.08.030 · Cited by 364
A physico-chemical basis for novel cementitious binders
Gartner, E. M., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.006 · Cited by 363
Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete
Okoye, F. N., Durgaprasad, J., & Singh, N. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.10.084 · Cited by 363
Comprehensive Renewable Energy
(2012) · Elsevier eBooks · doi:10.1016/c2010-1-68983-3 · Cited by 363
Computer simulation of structure and properties of crosslinked polymers: application to epoxy resins
Yarovsky, I. (2002) · Polymer · doi:10.1016/s0032-3861(01)00634-6 · Cited by 361
Akhtar, A., & Sarmah, A. K. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.10.319 · Cited by 361
Silva, R. V., de Brito, J., & Dhir, R. K. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117629 · Cited by 360
Self-citationCorrosion performance of rice husk ash blended concrete
Saraswathy, V., & Song, H.-W. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.05.037 · Cited by 359
Fresh and hardened properties of seawater-mixed concrete
Younis, A., Ebead, U., Suraneni, P., & Nanni, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.126 · Cited by 358
Kurad, R., Silvestre, J. D., de Brito, J., & Ahmed, H. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.236 · Cited by 357
Self-citationAccelerated Curing of Compacted Calcium Silicate Mortars on Exposure to CO 2
YOUNG, J. F., BERGER, R. L., & BREESE, J. (1974) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1974.tb11420.x · Cited by 356
Influence of the pre-saturation of recycled coarse concrete aggregates on concrete properties
Ferreira, L., de Brito, J., & Bizinotto, M. B. (2011) · Magazine of Concrete Research · doi:10.1680/macr.2011.63.8.617 · Cited by 356
Effect of Fly Ash on the Durability Properties of High Strength Concrete
Nath, P., & Sarker, P. (2011) · Procedia Engineering · doi:10.1016/j.proeng.2011.07.144 · Cited by 355
Khaliq, W., & Kodur, V. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.012 · Cited by 354
Evaluation of the durability of concrete made with crushed glass aggregates
de Castro, S., & de Brito, J. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.09.021 · Cited by 351
Self-citationExperimental study of the thermo-mechanical properties of recycled PET fiber-reinforced concrete
Fraternali, F., Ciancia, V., Chechile, R., Rizzano, G., Feo, L., & Incarnato, L. (2011) · Composite Structures · doi:10.1016/j.compstruct.2011.03.025 · Cited by 351
Effect of calcination temperature on the pozzolanic activity of sugar cane bagasse ash
Cordeiro, G. C., Filho, R. D. T., & Fairbairn, E. D. M. R. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.013 · Cited by 350
Use of low CaO unprocessed steel slag in concrete as fine aggregate
Qasrawi, H. Y., Shalabi, F. I., & Asi, I. M. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.06.003 · Cited by 350
Handbook of Environmental Materials Management
(2019) · Springer eBooks · doi:10.1007/978-3-319-73645-7 · Cited by 350
Impact of hydrated magnesium carbonate additives on the carbonation of reactive MgO cements
Unluer, C., & Al-Tabbaa, A. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.08.009 · Cited by 347
Brazilian waste fibres as reinforcement for cement-based composites
Savastano, H., Warden, P. G., & Coutts, R. S. P. (2000) · Cement and Concrete Composites · doi:10.1016/s0958-9465(00)00034-2 · Cited by 346
Page, A. L., Elseewi, A. A., & Straughan, I. R. (1979) · Residue Reviews · doi:10.1007/978-1-4612-6185-8_2 · Cited by 344
Use of recycled waste pet bottles fibers for the reinforcement of concrete
Foti, D. (2012) · Composite Structures · doi:10.1016/j.compstruct.2012.09.019 · Cited by 343
Fonseca, N., de Brito, J., & Evangelista, L. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.04.002 · Cited by 343
Self-citationUse of Brazilian sugarcane bagasse ash in concrete as sand replacement
Sales, A., & Lima, S. A. (2010) · Waste Management · doi:10.1016/j.wasman.2010.01.026 · Cited by 342
Use of recycled fine aggregate in concretes with durable requirements
Zega, C. J., & Di Maio, Á. A. (2011) · Waste Management · doi:10.1016/j.wasman.2011.06.011 · Cited by 341
Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes
Güneyisi, E., Gesoğlu, M., Karaoğlu, S., & Mermerdaş, K. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.017 · Cited by 336
Bravo, M., de Brito, J., Pontes, J., & Evangelista, L. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.12.103 · Cited by 336
Self-citationEffect of ureolytic bacteria on concrete properties
Siddique, R., & Chahal, N. K. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.04.010 · Cited by 334
Dilbas, H., Şimşek, M., & Çakır, Ö. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.02.057 · Cited by 334
Influence of recycled aggregate on fly ash geopolymer concrete properties
Nuaklong, P., Sata, V., & Chindaprasirt, P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.10.109 · Cited by 333
Establishing a sustainable mining operation: an overview
Laurence, D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.08.019 · Cited by 333
Developments on vegetable fibre–cement based materials in São Paulo, Brazil: an overview
Agopyan, V., Savastano, H., John, V. M., & Cincotto, M. A. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.09.004 · Cited by 328
Zhang, D., Zhou, C.-H., Lin, C.-X., Tong, D.-S., & Yu, W.-H. (2010) · Applied Clay Science · doi:10.1016/j.clay.2010.06.019 · Cited by 328
Celik, K., Jackson, M. D., Mancio, M., Meral, C., Emwas, A.-H., Mehta, P. K., & Monteiro, P. J. M. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.003 · Cited by 325
Mehta, A., & Siddique, R. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.08.313 · Cited by 325
Kou, S.-C., & Poon, C.-S. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.009 · Cited by 323
A Review of Sludge-to-Energy Recovery Methods
Oladejo, J., Shi, K., Luo, X., Yang, G., & Wu, T. (2018) · Energies · doi:10.3390/en12010060 · Cited by 322
Ranjbar, N., Mehrali, M., Alengaram, U. J., Metselaar, H. S. C., & Jumaat, M. Z. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.064 · Cited by 321
Gursel, A. P., Maryman, H., & Ostertag, C. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.029 · Cited by 320
Effect of fine aggregate replacement with Class F fly ash on the mechanical properties of concrete
Siddique, R. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)01000-1 · Cited by 317
Ramakrishna, G., & Sundararajan, T. (2004) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.09.008 · Cited by 317
Sewage sludge ash characteristics and potential for use in concrete
Lynn, C. J., Dhir, R. K., Ghataora, G. S., & West, R. P. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.122 · Cited by 316
Shrinkage Cracking of Fiber Reinforced Concrete
Grzybowski, M., & Shah, S. P. (1990) · ACI Materials Journal · doi:10.14359/1951 · Cited by 315
Rana, A. K., Mandal, A., & Bandyopadhyay, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00267-1 · Cited by 314
Recycling of seashell waste in concrete: A review
Mo, K. H., Alengaram, U. J., Jumaat, M. Z., Lee, S. C., Goh, W. I., & Yuen, C. W. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.009 · Cited by 314
Alkali-activated metakaolin: A short guide for civil Engineer – An overview
Rashad, A. M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.12.030 · Cited by 313
Braga, A. M., Silvestre, J. D., & de Brito, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.057 · Cited by 312
Self-citationDaval, D., Martinez, I., Corvisier, J., Findling, N., Goffé, B., & Guyot, F. (2009) · Chemical Geology · doi:10.1016/j.chemgeo.2009.01.022 · Cited by 310
Physical, chemical and mineralogical properties of fine recycled aggregates made from concrete waste
Evangelista, L., Guedes, M., de Brito, J., Ferro, A. C., & Pereira, M. F. C. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.112 · Cited by 309
Tangchirapat, W., Jaturapitakkul, C., & Chindaprasirt, P. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.01.008 · Cited by 308
Blengini, G. A., & Garbarino, E. (2010) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2010.01.027 · Cited by 306
Mechanical and microstructural properties of heat cured alkali-activated slag mortars
Aydın, S., & Baradan, B. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.10.005 · Cited by 305
Tong, T., Fan, Z., Liu, Q., Wang, S., Tan, S., & Yu, Q. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.092 · Cited by 305
Techno-economic evaluation of innovative steel production technologies
Fischedick, M., Marzinkowski, J., Winzer, P., & Weigel, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.063 · Cited by 304
Comparative LCA of recycled and conventional concrete for structural applications
Knoeri, C., Sanyé-Mengual, E., & Althaus, H.-J. (2013) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-012-0544-2 · Cited by 303
Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ash
Huang, C.-H., Lin, S.-K., Chang, C.-S., & Chen, H.-J. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.04.016 · Cited by 302
Asokan, P., Osmani, M., & Price, A. D. F. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2008.12.004 · Cited by 300
X-ray computed tomography proof of bacterial-based self-healing in concrete
Wang, J., Dewanckele, J., Cnudde, V., Vlierberghe, S. V., Verstraete, W., & Belie, N. D. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.014 · Cited by 299
Utilization of bagasse ash in high-strength concrete
Rukzon, S., & Chindaprasirt, P. (2011) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2011.07.045 · Cited by 299
Islam, A. B. M. S., Alengaram, U. J., Jumaat, M. Z., & Bashar, I. I. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.080 · Cited by 298
Life cycle assessment of concrete made with high volume of recycled concrete aggregates and fly ash
Kurda, R., Silvestre, J. D., & de Brito, J. (2018) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2018.07.004 · Cited by 298
Self-citationXu, J., & Yao, W. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.06.003 · Cited by 297
Kurda, R., de Brito, J., & Silvestre, J. D. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.004 · Cited by 292
Self-citationA brief on high-volume Class F fly ash as cement replacement – A guide for Civil Engineer
Rashad, A. M. (2015) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2015.10.002 · Cited by 291
Agricultural wastes as aggregate in concrete mixtures – A review
Shafigh, P., Mahmud, H. B., Jumaat, M. Z., & Zargar, M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.11.074 · Cited by 291
Opc-fly ash cementitious systems: study of gel binders produced during alkaline hydration
Palomo, A., Fernández-Jiménez, A., Kovalchuk, G., Ordoñez, L. M., & Naranjo, M. C. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-0585-7 · Cited by 290
Engineering properties of controlled low-strength materials containing waste oyster shells
Kuo, W.-T., Wang, H.-Y., Shu, C.-Y., & Su, D.-S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.04.020 · Cited by 290
Freeze–thaw resistance of concrete produced with fine recycled concrete aggregates
Bogas, J. A., de Brito, J., & Ramos, D. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.065 · Cited by 290
Zhang, Z., Shi, G., Wang, S., Fang, X., & Liu, X. (2013) · Renewable Energy · doi:10.1016/j.renene.2012.08.024 · Cited by 289
Tests and methods of evaluating the self-healing efficiency of concrete: A review
Muhammad, N. Z., Shafaghat, A., Keyvanfar, A., Majid, M. Z. A., Ghoshal, S. K., Mohammadyan-Yasouj, S. E., Ganiyu, A. A., Kouchaksaraei, M. S., Kamyab, H., Taheri, M. M., et al. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.017 · Cited by 289
Concrete using agro-waste as fine aggregate for sustainable built environment – A review
Prusty, J. K., Patro, S. K., & Basarkar, S. S. (2016) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2016.06.003 · Cited by 289
Ultrahigh Performance Nanoengineered Graphene–Concrete Composites for Multifunctional Applications
Dimov, D., Amit, I., Gorrie, O., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705183 · Cited by 285
Environmental evaluation of green concretes versus conventional concrete by means of LCA
Turk, J., Cotič, Z., Mladenovič, A., & Šajna, A. (2015) · Waste Management · doi:10.1016/j.wasman.2015.06.035 · Cited by 283
Filler cement: The effect of the secondary component on the hydration of Portland cement
Gutteridge, W. A., & Dalziel, J. A. (1990) · Cement and Concrete Research · doi:10.1016/0008-8846(90)90046-z · Cited by 282
Competition of several carbonation reactions in concrete: A parametric study
Peter, M. A., Muntean, A., Meier, S. A., & Böhm, M. (2008) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.09.003 · Cited by 281
Chemistry of corrosion inhibitors
Gaidis, J. M. (2003) · Cement and Concrete Composites · doi:10.1016/s0958-9465(03)00037-4 · Cited by 281
Liu, H., Huang, J., Chen, Z., Chen, G., Zhang, K.-Q., Al-Deyab, S. S., & Lai, Y. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.07.114 · Cited by 280
Filler cement: The effect of the secondary component on the hydration of Portland cement
Gutteridge, W. A., & Dalziel, J. A. (1990) · Cement and Concrete Research · doi:10.1016/0008-8846(90)90011-l · Cited by 278
Durability of recycled aggregate concrete designed with equivalent mortar volume method
Abbas, A., Fathifazl, G., Isgor, O. B., Razaqpur, A. G., Fournier, B., & Foo, S. (2009) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.02.012 · Cited by 278
Development of corn cob ash blended cement
Adesanya, D. A., & Raheem, A. A. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.11.013 · Cited by 276
Optimizing the Use of Fly Ash in Concrete
Thomas, M. D. (2007) · Cited by 275
Singh, M., & Siddique, R. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.026 · Cited by 275
Self-healing of mechanically-loaded self consolidating concretes with high volumes of fly ash
Şahmaran, M., Keskin, S. B., Özerkan, N. G., & Yaman, İ. Ö. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.07.001 · Cited by 274
Sim, J., & Park, C. (2011) · Waste Management · doi:10.1016/j.wasman.2011.06.014 · Cited by 273
Pereira, P., Evangelista, L., & de Brito, J. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.06.009 · Cited by 273
Self-citationSUITABILITY OF RECYCLED CONCRETE AGGREGATE FOR USE IN BS 5328 DESIGNATED MIXES.
DHIR, R. K., LIMBACHIYA, M. C., LEELAWAT, T., 5328, B., & 882, B. (1999) · Proceedings of the Institution of Civil Engineers - Structures and Buildings · doi:10.1680/istbu.1999.31568 · Cited by 273
Sustainable concrete: Building a greener future
Assi, L., Carter, K., Deaver, E. (., Anay, R., & Ziehl, P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.07.123 · Cited by 273
Comparative LCA on using waste materials in the cement industry: A Hong Kong case study
Hossain, M. U., Poon, C. S., Lo, I. M. C., & Cheng, J. C. P. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.12.012 · Cited by 272
Decomposition of synthesized ettringite by carbonation
Nishikawa, T., Suzuki, K., Ito, S., Sato, K., & Takebe, T. (1992) · Cement and Concrete Research · doi:10.1016/0008-8846(92)90130-n · Cited by 272
Corrosion inhibitors for chlorides induced corrosion in reinforced concrete structures
Ormellese, M., Berra, M., Bolzoni, F., & Pastore, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.11.007 · Cited by 271
Teixeira, E. R., Mateus, R., Camões, A. F., Bragança, L., & Branco, F. G. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.124 · Cited by 271
Andreani, M., Luquot, L., Gouze, P., Godard, M., Hoisé, E., & Gibert, B. (2009) · Environmental Science & Technology · doi:10.1021/es8018429 · Cited by 270
Abd Elhakam, A., Mohamed, A. E., & Awad, E. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.013 · Cited by 269
Gomes, M., & de Brito, J. (2008) · Materials and Structures · doi:10.1617/s11527-008-9411-9 · Cited by 269
Tensile strength behaviour of recycled aggregate concrete
Silva, R. V., de Brito, J., & Dhir, R. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.034 · Cited by 268
Self-citationArezoumandi, M., Smith, A., Volz, J. S., & Khayat, K. H. (2015) · Engineering Structures · doi:10.1016/j.engstruct.2015.01.043 · Cited by 268
Duan, P., Yan, C., & Zhou, W. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.009 · Cited by 268
Arrigoni, A., Pelosato, R., Melià, P., Ruggieri, G., Sabbadini, S., & Dotelli, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.02.161 · Cited by 268
Specifications for concrete with recycled aggregates
(1994) · Materials and Structures · doi:10.1007/bf02473217 · Cited by 268
Engineering Properties of Concrete with Waste Recycled Plastic: A Review
Babafemi, A. J., Šavija, B., Paul, S. C., & Anggraini, V. (2018) · Sustainability · doi:10.3390/su10113875 · Cited by 267
Screening of bacteria and concrete compatible protection materials
Erşan, Y. Ç., Da Silva, F. B., Boon, N., Verstraete, W., & De Belie, N. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.04.027 · Cited by 266
6. Supplementary Cementitious Materials
Snellings, R., Mertens, G., & Elsen, J. (2012) · Applied Mineralogy of Cement & Concrete · doi:10.1515/9781501508356-008 · Cited by 266
Mechanical and thermal properties of green lightweight engineered cementitious composites
Huang, X., Ranade, R., Zhang, Q., Ni, W., & Li, V. C. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.07.104 · Cited by 265
Effect of seawater for mixing and curing on structural concrete
Wegian, F. M. (2010) · The IES Journal Part A: Civil & Structural Engineering · doi:10.1080/19373260.2010.521048 · Cited by 265
A review on surface treatment for concrete – Part 2: Performance
Pan, X., Shi, Z., Shi, C., Ling, T.-C., & Li, N. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.11.128 · Cited by 264
Structural performance of nano-silica modified fly-ash based geopolymer concrete
Adak, D., Sarkar, M., & Mandal, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.111 · Cited by 264
Nanoparticles as concrete additives: Review and perspectives
Reches, Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.214 · Cited by 264
Prospective scenarios on energy efficiency and CO2 emissions in the European Iron & Steel industry
Pardo, N., & Moya, J. A. (2013) · Energy · doi:10.1016/j.energy.2013.03.015 · Cited by 262
Influence of mineral admixtures on thermal conductivity and compressive strength of mortar
Demirboǧa, R. (2003) · Energy and Buildings · doi:10.1016/s0378-7788(02)00052-x · Cited by 261
The effects of nano-silica and nano-alumina on frost resistance of normal concrete
Behfarnia, K., & Salemi, N. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.07.088 · Cited by 259
Reactivity and strength development of CO2 activated non-hydraulic calcium silicates
Bukowski, J. M., & Berger, R. L. (1979) · Cement and Concrete Research · doi:10.1016/0008-8846(79)90095-4 · Cited by 258
Elevated-temperature thermal properties of lightweight foamed concrete
Mydin, M. A. O., & Wang, Y. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.07.016 · Cited by 258
Utilization of red mud derived from bauxite in self-compacting concrete
Liu, R.-X., & Poon, C. S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.09.049 · Cited by 258
Luna Galiano, Y., Fernández Pereira, C., & Vale, J. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.08.127 · Cited by 257
Aerogel-incorporated concrete: An experimental study
Gao, T., Jelle, B. P., Gustavsen, A., & Jacobsen, S. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.10.100 · Cited by 256
Coelho, A., & de Brito, J. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.08.024 · Cited by 256
Self-citationPotential of CO 2 sequestration through construction and demolition (C&D) waste—An overview
Kaliyavaradhan, S. K., & Ling, T.-C. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.05.014 · Cited by 255
Ashish, D. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.245 · Cited by 255
Reuse of sanitary ceramic wastes as coarse aggregate in eco-efficient concretes
Medina, C., de Rojas, M. I. S., & Frı́as, M. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.08.015 · Cited by 253
Fillers in cementitious materials — Experience, recent advances and future potential
John, V. M., Damineli, B. L., Quattrone, M., & Pileggi, R. G. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.09.013 · Cited by 251
Performance of mussel shell as aggregate in plain concrete
Martínez-García, C., González-Fonteboa, B., Martínez‐Abella, F., & Carro‐López, D. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.091 · Cited by 250
Effect of glass powders on the mechanical and durability properties of cementitious materials
Kamali, M., & Ghahremaninezhad, A. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.06.010 · Cited by 249
Ultimate load behaviour of bamboo-reinforced lightweight concrete beams
Ghavami, K. (1995) · Cement and Concrete Composites · doi:10.1016/0958-9465(95)00018-8 · Cited by 249
Zheng, Y., Wang, S., Ouyang, Z., Zou, Y., Liu, J., Li, C., Li, X., & Feng, J. (2009) · Advances in Space Research · doi:10.1016/j.asr.2008.07.006 · Cited by 248
Characteristics and properties of lightweight concrete manufactured with cenospheres
Blanco, F., Garcı́a, P., Mateos, P., & Ayala, J. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00357-4 · Cited by 248
Uysal, H., Demirboğa, R., Şahin, R., & Gül, R. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2003.09.018 · Cited by 247
Nuaklong, P., Sata, V., & Chindaprasirt, P. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.11.152 · Cited by 247
An overview on the reuse of waste glasses in alkali-activated materials
Liu, Y., Shi, C., Zhang, Z., & Li, N. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.007 · Cited by 246
Compounding and mechanical properties of biodegradable hemp fibre composites
Keller, A. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00102-7 · Cited by 245
Mastali, M., Dalvand, A., & Sattarifard, A. R. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.02.148 · Cited by 245
Impregnation and encapsulation of lightweight aggregates for self-healing concrete
Alghamri, R., Kanellopoulos, A., & Al‐Tabbaa, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.143 · Cited by 244
Multicriteria optimization of natural and recycled aggregate concrete for structural use
Tošić, N. D., Marinković, S. B., Dašić, T., & Stanić, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.070 · Cited by 243
Tailoring of interfaces in glass fiber reinforced polymer composites: a review
DiBenedetto, A. T. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(00)01357-5 · Cited by 240
Pedro, D., de Brito, J., & Evangelista, L. (2015) · Materials and Structures · doi:10.1617/s11527-014-0456-7 · Cited by 239
Self-citationDurability of Glass Fiber-Reinforced Polymer Reinforcing Bars in Concrete Environment
Benmokrane, B., Wang, P., Ton-That, T. M., et al. (2002) · Journal of Composites for Construction · doi:10.1061/(asce)1090-0268(2002)6:3(143 · Cited by 239
Self healing of high strength concrete after deterioration by freeze/thaw
Jacobsen, S., & Sellevold, E. J. (1996) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00179-4 · Cited by 239
Gupta, S., Kua, H. W., & Pang, S. D. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.11.015 · Cited by 239
Use of silica fume and recycled steel fibers in self-compacting concrete (SCC)
Mastali, M., & Dalvand, A. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.046 · Cited by 238
Environmental assessment of green concretes for structural use
Marinković, S., Dragaš, J., Ignjatović, I., & Tošić, N. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.04.015 · Cited by 237
Sustainable design of pervious concrete using waste glass and recycled concrete aggregate
Lu, J., Yan, X., He, P., & Poon, C. S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.06.260 · Cited by 236
Applications of rice husk ash as green and sustainable biomass
Moayedi, H., Aghel, B., Abdullahi, M. M., Nguyen, H., & Rashid, A. S. A. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117851 · Cited by 236
Chloride Transport in Concrete - Measurement and Prediction
Tang, L. (1996) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 234
Hooton, R. D. (1993) · ACI Materials Journal · doi:10.14359/4009 · Cited by 234
Properties of high performance concrete made with recycled fine ceramic and coarse mixed aggregates
Gonzalez-Corominas, A., & Etxeberria, M. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.07.016 · Cited by 233
Thermal conductivity and compressive strength of concrete incorporation with mineral admixtures
Demirboğa, R. (2006) · Building and Environment · doi:10.1016/j.buildenv.2006.06.010 · Cited by 231
Properties of glass concrete reinforced with short basalt fibre
Borhan, T. M. (2012) · Materials & Design · doi:10.1016/j.matdes.2012.05.062 · Cited by 231
Cartuxo, F., de Brito, J., Evangelista, L., Jiménez, J. R., & Ledesma, E. F. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.03.119 · Cited by 230
Shakor, P., Sanjayan, J., Nazari, A., & Nejadi, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.037 · Cited by 229
The Alkali-Silica Reaction in Concrete
(1991) · CRC Press eBooks · doi:10.4324/9780203036631 · Cited by 228
The role of β-C2S and γ-C2S in carbon capture and strength development
Chang, J., Fang, Y., & Shang, X. (2016) · Materials and Structures · doi:10.1617/s11527-016-0797-5 · Cited by 228
Autonomous healing in concrete by bio-based healing agents – A review
Gupta, S., Pang, S. D., & Kua, H. W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.111 · Cited by 228
Potential of Wood Waste Ash as an Additive in Concrete
Udoeyo, F. F., Inyang, H. I., Young, D. T., & Oparadu, E. E. (2006) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2006)18:4(605 · Cited by 227
Effects on concrete durability of using recycled ceramic aggregates
Correia, J. R., de Brito, J., & Pereira, A. S. (2006) · Materials and Structures · doi:10.1617/s11527-005-9014-7 · Cited by 227
Self-citationSilva, R. V., de Brito, J., & Saikia, N. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.08.017 · Cited by 227
Self-citationWaste energy recovery and energy efficiency improvement in China’s iron and steel industry
Zhang, Q., Zhao, X., Lu, H., Ni, T., & Li, Y. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.072 · Cited by 226
Some Considerations for Applicability of Seawater as Mixing Water in Concrete
Nishida, T., Otsuki, N., Ohara, H., Garba-Say, Z. M., & Nagata, T. (2013) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001006 · Cited by 225
Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer matrix
Wongsa, A., Boonserm, K., Waisurasingha, C., Sata, V., & Chindaprasirt, P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.147 · Cited by 224
Current challenges and future directions for bacterial self-healing concrete
Lee, Y. S., & Park, W. (2018) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-018-8830-y · Cited by 224
Self-Sensing Concrete in Smart Structures
(2014) · Elsevier eBooks · doi:10.1016/c2013-0-14456-x · Cited by 224
Properties of concretes with Black/Oxidizing Electric Arc Furnace slag aggregate
Pellegrino, C., Cavagnis, P., Faleschini, F., & Brunelli, K. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.09.001 · Cited by 223
A comparative cradle-to-gate life cycle assessment of three concrete mix designs
Tait, M. W., & Cheung, W. M. (2016) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-016-1045-5 · Cited by 223
Superhydrophobic Coatings with Edible Materials
Wang, W., Lockwood, K., Boyd, L. M., Davidson, M. D., Movafaghi, S., Vahabi, H., Khetani, S. R., & Kota, A. K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06958 · Cited by 223
Final Setting Time and Compressive Strength of Fly Ash and GGBS-Based Geopolymer Paste and Mortar
Rao, G. M., & Rao, T. D. G. (2015) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-015-1757-z · Cited by 222
Ferreira, L., de Brito, J., & Saikia, N. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.098 · Cited by 222
Self-citationSaxena, S., & Tembhurkar, A. R. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.030 · Cited by 222
Zhong, N., & Post, W. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.11.028 · Cited by 220
Effect of blast furnace slag on self-healing of microcracks in cementitious materials
Huang, H., Ye, G., & Damidot, D. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.03.010 · Cited by 220
Arefi, M. R., & Rezaei-Zarchi, S. (2012) · International Journal of Molecular Sciences · doi:10.3390/ijms13044340 · Cited by 220
Effect of polymer modified cementitious coatings on water and chloride permeability in concrete
Diamanti, M. V., Brenna, A., Bolzoni, F., Berra, M., Pastore, T., & Ormellese, M. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.08.050 · Cited by 218
Mounanga, P., Gbongbon, W., Poullain, P., & Turcry, P. (2008) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2008.06.007 · Cited by 218
Effects of nano-silica on the strength development of geopolymer cured at room temperature
Deb, P. S., Sarker, P. K., & Barbhuiya, S. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.044 · Cited by 218
Self-healing cementitious materials based on bacteria and nutrients immobilized respectively
Chen, H., Qian, C., & Huang, H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.023 · Cited by 218
Utilization of wood ash in concrete manufacturing
Siddique, R. (2012) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2012.07.004 · Cited by 217
Calcium silicate carbonation products
Goto, S., Suenaga, K., Kado, T., & Fukuhara, M. (1995) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1995.tb09057.x · Cited by 217
Rashad, A. M. (2016) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2015.11.003 · Cited by 216
Bond strength of glass fiber reinforced polymer ribbed rebars in normal strength concrete
Hao, Q., Wang, Y., He, Z., & Ou, J. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.04.011 · Cited by 214
Fracture energy of natural fibre reinforced concrete
Merta, I., & Tschegg, E. K. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.11.060 · Cited by 214
UTILIZATION OF ALUMINA RED MUD FOR SYNTHESIS OF INORGANIC POLYMERIC MATERIALS
Dimas, D. D., Giannopoulou, I. P., & Panias, D. (2009) · Mineral Processing and Extractive Metallurgy Review · doi:10.1080/08827500802498199 · Cited by 214
Shehata, M. H., & Thomas, M. D. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00680-9 · Cited by 213
Fernández-Olmo, I., Chacón, E., & Irabien, Á. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00545-2 · Cited by 213
Construction and demolition waste indicators
Mália, M., de Brito, J., Pinheiro, M. D., & Bravo, M. (2013) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x12471707 · Cited by 213
Self-citationReuse of woody biomass fly ash in cement-based materials
Berra, M., Mangialardi, T., & Paolini, A. E. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.11.052 · Cited by 211
A review of the current environmental challenges of the steel industry and its value chain
Conejo, A. N., Birat, J.-P., & Dutta, A. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.109782 · Cited by 211
Eddhahak, A., Drissi, S., Colin, J., Néji, J., & Caré, S. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.050 · Cited by 210
Sustainability of nanomaterials based self-healing concrete: An all-inclusive insight
Huseien, G. F., Shah, K. W., & Sam, A. R. M. (2019) · Journal of Building Engineering · doi:10.1016/j.jobe.2019.01.032 · Cited by 210
Rahla, K. M., Mateus, R., & Bragança, L. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.02.010 · Cited by 210
Properties of geopolymer with seeded fly ash and rice husk bark ash
Nazari, A., Bagheri, A., & Riahi, S. (2011) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.06.027 · Cited by 207
Sawdust Ash as Concrete Material
Udoeyo, F. F., & Dashibil, P. U. (2002) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2002)14:2(173 · Cited by 207
Mesoscale model for thermal conductivity of concrete
Zhang, W., Min, H., Gu, X., Xi, Y., & Xing, Y. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.106 · Cited by 206
Supplementary cementing materials in concrete
Papadakis, V. G., Antiohos, S. K., & Tsimas, S. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00829-3 · Cited by 206
Enhanced crack closure performance of microbial mortar through nitrate reduction
Erşan, Y. Ç., Hernandez-Sanabria, E., Boon, N., & de Belie, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.04.001 · Cited by 206
Moon, H. Y., Shin, D. G., & Choi, D. S. (2005) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.08.012 · Cited by 205
Cited by
Miller, S. A., Habert, G., Myers, R. J., & Harvey, J. T. (2021) · One Earth · doi:10.1016/j.oneear.2021.09.011 · Cited by 308
Pathways towards sustainable concrete
Coffetti, D., Crotti, E., Gazzaniga, G., Carrara, M., Pastore, T., & Coppola, L. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106718 · Cited by 274
Scope, C., Guenther, E., Schütz, J., Mielecke, T., Mündecke, E., Schultze, K., & Saling, P. (2020) · Civil Engineering Design · doi:10.1002/cend.202000024 · Cited by 22
Metadata
- Authors
- de Brito, J., & Kurda, R.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 281
- Pages
- 123558
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3086090482
- Cited by
- 436
- References
- 878
- FWCI
- 30.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.