The DOI matches its Crossref record; 878 of the 878 references it cites were found in a registry or an index.
The past and future of sustainable concrete: A critical review and new strategies on cement-based materials
Abstract
The negative impacts of cement-based material (CBM) production are way bigger than ever expected. To illustrate the scale of this phenomenon, all the forests in the world, regardless of the fact that they are disappearing at an alarming rate, are not enough to offset even half the environmental impact (EI) of global aggregates and cement production. Thus, it is necessary to promote scientific research and guide more researchers and professionals in the construction industry to investigate the undiscovered sustainability paths, namely for concrete before and after end-of-life. For that purpose, a global and extensive review is made here to provide an overall view of concrete sustainability in all possible paths. Then, each path is organized as follows: (i) brief introduction, (ii) presentation of non-traditional materials and techniques that can be used for the selected strategy, (iii) their limitations and (iv) future trends. The study also identifies what is already known to avoid putting valuable research resources into redundant scientific studies. The following paths of concrete production sustainability were identified: mix composition (e.g. reduce the EI and resources use of binders, aggregates, water and reinforcement), materials manufacturing (e.g. new production techniques of cement, aggregates and steel bars), concrete mixing (e.g. mixer type and mixing method), on-site application (e.g. regular casting and digital concrete/3D printing), and in-service performance (e.g. increase the durability of reinforced concrete and carbon capture and thermal conductivity). On most of these paths, many studies have been made on the same non-traditional materials and techniques and similar outputs were obtained. Yet, many other non-traditional materials and techniques have not been explored before, or are incomplete in terms of the characteristics analysed. More than providing definite solutions, this contribution intends to open the minds of the readers to the vastly unexplored world of “green concrete”.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Items 801–878 of 878
Mechanism of natural zeolite powder in preventing alkali—silica reaction in concrete
Naiqian, F., & Tingyu, H. (1998) · Advances in Cement Research · doi:10.1680/adcr.1998.10.3.101 · Cited by 44
Possibilities of municipal solid waste incinerator fly ash utilisation
Hartmann, S., Koval, L., Škrobánková, H., Matýsek, D., Winter, F., & Purgar, A. (2015) · Waste Management & Research The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x15587545 · Cited by 44
Properties of Concrete Incorporating Recycled Post-Consumer Environmental Wastes
Eisa, A. S. (2014) · International Journal of Concrete Structures and Materials · doi:10.1007/s40069-013-0065-9 · Cited by 43
Na, S.-H., Hama, Y., Taniguchi, M., Katsura, O., Sagawa, T., & Zakaria, M. (2012) · Journal of Advanced Concrete Technology · doi:10.3151/jact.10.240 · Cited by 43
Living concrete: Democratizing living walls
Riley, B., Larrard, F. D., Malécot, V., Dubois-Brugger, I., Lequay, H., & Lecomte, G. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.04.065 · Cited by 43
Stacked autoencoder for operation prediction of coke dry quenching process
Wang, J., Wang, Y., Yao, Y., Yang, B., & Ma, S. (2019) · Control Engineering Practice · doi:10.1016/j.conengprac.2019.04.007 · Cited by 43
Utilization of carbon dioxide by chemically accelerated mineral carbonation
Bałdyga, J., Henczka, M., & Sokolnicka, K. (2010) · Materials Letters · doi:10.1016/j.matlet.2009.12.043 · Cited by 41
Lo, T. Y., Nadeem, A., Tang, W., & Yu, P. C. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.07.026 · Cited by 41
An alternative mechanism for accelerated carbon sequestration in concrete
Haselbach, L. M., & Thomle, J. (2014) · Sustainable Cities and Society · doi:10.1016/j.scs.2014.01.001 · Cited by 41
Tian, H., Zhang, Y. X., Yang, C., & Ding, Y. (2016) · Structural Concrete · doi:10.1002/suco.201500177 · Cited by 41
CFD modelling and performance increase of a pusher type reheating furnace using oxy-fuel burners
Mayr, B., Prieler, R., Demuth, M., Moderer, L., & Hochenauer, C. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.07.222 · Cited by 41
Specifications of concrete with recycled aggregates
Pillard, W., Sedran, T., & Rougeau, P. (2019) · CRC Press eBooks · doi:10.1201/9781351052825-20 · Cited by 41
Artificial weathering pools of calcium-rich industrial waste for CO2 sequestration
Morales‐Flórez, V., Santos, A., Lemus, A. A., & Esquivias, L. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.10.039 · Cited by 40
Comparison of CO2 emission between COREX and blast furnace iron-making system
Hu, C., Han, X., Li, Z., et al. (2009) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(09)60052-8 · Cited by 40
Mechanical performance of date palm fibre-reinforced gypsums
Al-Rifaie, W. N., & Al-Niami, M. (2016) · Innovative Infrastructure Solutions · doi:10.1007/s41062-016-0022-y · Cited by 40
Toxicological risk assessment in CO2 capture and storage technology
Hillebrand, M., Pflugmacher, S., & Hahn, A. (2016) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2016.10.014 · Cited by 40
Allalou, S., Kheribet, R., & Benmounah, A. (2018) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2018.e00213 · Cited by 40
Dong, M., Elchalakani, M., Karrech, A., Pham, T. M., & Yang, B. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2019.109598 · Cited by 40
The environmental impacts of an innovative modular lightweight steel system: The Elissa case
Iuorio, O., Napolano, L., Fiorino, L., & Landolfo, R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117905 · Cited by 39
A study on thermal self-diagnostic and self-adaptive smart concrete structures
Sun, M., Zhuo-qiu, L., Liu, Q., Tang, Z., & Darong, S. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00284-2 · Cited by 38
Near superhydrophobic coating synthesized from rice husk ash: Anti-fouling evaluation
Junaidi, M. U. M., Ahmad, N. N. R., Leo, C. P., & Yee, H. M. (2016) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2016.05.018 · Cited by 38
Hu, Y., Tan, C., Niska, J. V., Chowdhury, J. I., Balta‐Ozkan, N., Varga, L., Roach, P. A., & Wang, C. (2019) · Energy · doi:10.1016/j.energy.2019.07.054 · Cited by 38
Durability Design of Concrete Hydropower Structures
Jianxia, S. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-087872-0.00619-3 · Cited by 37
Properties of Belite-Rich Portland Cement and Concrete in China
Sui, T., Fan, L., Wen, Z., & Wang, J. (2015) · Journal of Civil Engineering and Architecture · doi:10.17265/1934-7359/2015.04.002 · Cited by 37
Sequestration of CO2 in magnesium silicates, in Western Macedonia, Greece
Koukouzas, N., Gemeni, V., & Ziock, H.-J. (2009) · International Journal of Mineral Processing · doi:10.1016/j.minpro.2009.07.013 · Cited by 37
Alkali-silica reaction in concrete
Barnes, P., & Bensted, J. (2002) · CRC Press eBooks · doi:10.1201/9781482295016-15 · Cited by 37
Taylor-Lange, S. C., Rajabali, F., Holsomback, N. A., Riding, K. A., & Juenger, M. C. G. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.06.008 · Cited by 36
Aggregate Made from Incinerated Sludge Residue
Yip, W. K., & Tay, J. (1990) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(1990)2:2(84 · Cited by 36
Valorization of mussel and oyster shells toward metakaolin-based alkaline activated material
Monneron-Gyurits, M., Joussein, E., Soubrand, M., Fondanèche, P., & Rossignol, S. (2018) · Applied Clay Science · doi:10.1016/j.clay.2018.05.027 · Cited by 36
İlbaş, M., Bektaş, A., & Karyeyen, S. (2019) · Fuel · doi:10.1016/j.fuel.2019.115990 · Cited by 36
Fly ash in landfill top covers – a review
Brännvall, E., & Kumpienė, J. (2015) · Environmental Science Processes & Impacts · doi:10.1039/c5em00419e · Cited by 34
EFFECT OF NANOPARTICLES ON FROST DURABILITY OF CONCRETE
Salemi, N., Behfarnia, K., & Zaree, S. A. (2014) · Cited by 34
Yang, W., Luo, Z., Ying-jie, G., Liu, Z., & Zou, Z. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.11.044 · Cited by 34
Avaliação do Rendimento Escolar ou Punição?
Jarilkanov, B., & Asanov, S. (2007) · Потомки Аль-Фаргани · Cited by 33
Durability of concrete mixed with fine recycled aggregates
Levy, S. M., & Helène, P. (2008) · Exacta · doi:10.5585/exacta.v5i1.1027 · Cited by 32
The Possibilities of Using Tobacco Wastes in Producing Lightweight Concrete
Öztürk, T., Bayrakl, M., & Turkey, H. S. (2005) · eCommons (Cornell University) · Cited by 31
The performance of a self-cleaning cool cementitious surface
Werle, A. P., de Souza, M. L., Loh, K., Ando, R. A., & John, V. M. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.06.025 · Cited by 31
Calculations of U-Values of HollowConcrete Masonry
Valore, R. C. (1980) · ACI Concrete International · Cited by 30
Cationic oligomeric surfactants as novel air entraining agents for concrete
Chen, J., Qiao, M., Gao, N., Ran, Q., Wu, J., Shan, G., Qi, S., & Wu, S. (2017) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2017.11.065 · Cited by 30
Juan-Valdés, A., García-González, J., Rodríguez-Robles, D., Guerra‐Romero, M. I., Gayarre, F. L., Belie, N. D., & Pozo, J. M. M.-D. (2018) · Materials · doi:10.3390/ma12010024 · Cited by 30
Wang, K., & Hu, J. (2005) · Journal of Advanced Concrete Technology · doi:10.3151/jact.3.371 · Cited by 29
Rossen, J. E. (2014) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.5075/epfl-thesis-6294 · Cited by 28
Newlands, K. C., & Macphee, D. E. (2017) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1080/17436753.2017.1299986 · Cited by 28
Energy Use in Premanufacture (Mining)
Jeswiet, J., Archibald, J. F., Thorley, U., & Souza, E. D. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.01.071 · Cited by 27
İlbaş, M., Bektaş, A., & Karyeyen, S. (2018) · Fuel · doi:10.1016/j.fuel.2018.04.023 · Cited by 27
Polarization Resistance of Stainless Steel-Coated Rebars
Gu, P., Arsenault, B., Beaudoin, J. J., Legoux, J. G., Harvey, B., & Fournier, J. (1998) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00008-8 · Cited by 26
Synthesis of CO 2 -adsorbing ZSM-5 zeolite from rice husk ash via the colloidal pretreatment method
Wang, Y., Du, T., Fang, X., Jia, H., Qiu, Z., & Song, Y. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.04.090 · Cited by 26
Influence of Humidity on the Apparent Thermal Conductivity of Concrete Pozzolan
Bessenouci, M. Z., Bibi-Triki, N., Bendimerad, S., Nakoul, Z., Khelladi, S., & Hakem, A. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.07.022 · Cited by 24
Thermal stability and dynamic mechanical behavior of acrylic resin and acrylic melamine coatings
Chattopadhyay, D. K., Kumar, D., Sreedhar, B., & Raju, K. V. S. N. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.13145 · Cited by 24
Lightweight Concrete Masonry with Recycled Wood Aggregate
Stahl, D. C., Skoraczewski, G., Arena, P., & Stempski, B. (2002) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2002)14:2(116 · Cited by 24
Sočo, E., & Kalembkiewicz, J. (2006) · Chemosphere · doi:10.1016/j.chemosphere.2006.09.077 · Cited by 23
Carbon dioxide (CO2) capture and storage technology in the cement and concrete industry
Ghoshal, S., & Zeman, F. (2010) · Elsevier eBooks · doi:10.1533/9781845699574.5.469 · Cited by 22
Construction Materials Reinforced with Natural Products
Şanal, İ., & Verma, D. (2017) · Springer eBooks · doi:10.1007/978-3-319-48281-1_75-1 · Cited by 22
Adsorbents/catalysts from forest biomass fly ash. Influence of alkaline activating agent
Girón, R. P., Gil, R. R., Suárez‐Ruíz, I., Fuente, E., & Ruíz, B. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.01.051 · Cited by 21
Suitability and practicality of using coarse RCA in normal and high-strength concrete
Dhir, R. K., & Paine, K. A. (2004) · Cited by 19
Kim, H. G., Rehman, A. U., Qudoos, A., & Ryou, J.-S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.08.092 · Cited by 19
Sustainable development and physical infrastructure materials
Heard, R. A., Hendrickson, C. T., & McMichael, F. C. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.7 · Cited by 18
Corrosion protection of galvanized rebars in ternary binder concrete exposed to chloride penetration
Molina, F. J. L., Alonso, C., Sanchez, M., & Jarabo, R. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.09.002 · Cited by 18
Prediction Model for Concrete Behavior—Final Report
Folliard, K. J., Juenger, M. C. G., Schindler, A. K., Riding, K. A., Poole, J. L., Kallivokas, L. F., Slatnick, S., Whigham, J., & Meadows, J. (2008) · Cited by 17
Effects of Sewage Sludge Ashes Addition in Portland Cement Concretes
de Lima, F., Ingunza, D., & del Pilar, M. (2015) · Advances in engineering research/Advances in Engineering Research · doi:10.2991/cmes-15.2015.55 · Cited by 16
Classification and Characteristics of Alkali-Activated Cements
He, F., & Box, P. (2012) · Cited by 16
Filler technology for low-carbon high-dimensional stability concrete
Ling, S. K., & Kwan, A. K. H. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.083 · Cited by 16
Soft sensor development for improving economic efficiency of the coke dry quenching process
Wang, J., Xie, Z.-T., Yao, Y., et al. (2019) · Journal of Process Control · doi:10.1016/j.jprocont.2019.03.011 · Cited by 16
Alkali-activated cementitious materials: Mechanisms, microstructure and properties
Jiang, W. (1997) · Cited by 16
Reuse of fines from ready-mix concrete washing slurries
Silva, D. O. F., Quattrone, M., Romano, R., & Angulo, S. C. (2020) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2019.104653 · Cited by 16
Bottom Ash‐Based Geopolymer Materials: Mechanical and Environmental Properties
Onori, R., Will, J., Hoppe, A., Polettini, A., Pomi, R., & Boccaccini, A. R. (2011) · Ceramic engineering and science proceedings · doi:10.1002/9781118095393.ch7 · Cited by 14
Ye, T.-M., Wang, W., Gao, X., et al. (2007) · PubMed · Cited by 14
Effect of Zinc Oxide Nanoparticle on Strength of Cement Mortar
Nivethitha, D., & Dharmar, S. (2016) · International Journal For Science Technology And Engineering · Cited by 14
Magro, C., Paz-García, J. M., Ottosen, L. M., Mateus, E. P., & Ribeiro, A. B. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.10.010 · Cited by 13
The effect of phosphate corrosion inhibitor on steel in synthetic concrete solutions
Sail, L., Ghomari, F., Khelidj, A., Bezzar, A., & Benali, O. (2013) · Advances in materials Research · doi:10.12989/amr.2013.2.3.155 · Cited by 12
Hafez, H., Cheung, W. M., Nagaratnam, B., & Kurda, R. (2019) · Sustainable construction materials and technologies · doi:10.18552/2019/idscmt5135 · Cited by 11
Self-citationAlkali-Activation of Non-Wood Biomass Ash: Effects of Ash Characteristics on Concrete Performance
Matalkah, F., Darsanasiri, A. G. N. D., Abideen, S. U., Balachadra, A., & Soroushian, P. (2017) · Civil Engineering Journal · doi:10.28991/cej-2017-00000097 · Cited by 10
The Case for Stainless Steel Reinforcing Bars
Niejenhuis, C. V. (2015) · UWSpace (University of Waterloo) · Cited by 9
Bacteria for Concrete Surface Treatment
Li, P., & Qu, W. (2014) · Springer eBooks · doi:10.1007/978-3-319-09287-4_15 · Cited by 7
Han, B., Zhang, L., & Ou, J. (2017) · Springer eBooks · doi:10.1007/978-981-10-4349-9_7 · Cited by 7
Screening of Fungi for the Application of Self-Healing ConcretePreprint
Menon, R. R., Luo, J., Chen, X., Zhou, H., Liu, Z., Zhou, G., Zhang, N., & Jin, C. (2017) · arXiv (Cornell University) · doi:10.48550/arxiv.1711.10386 · Cited by 6
High volume coal and biomass fly ash eco-efficient concrete
Teixeira, E. (2019) · Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) · Cited by 3
Design of alkali-activated materials for a modular green wall and green roof system
Manso, M., & Castro-Gomes, J. P. (2019) · MATEC Web of Conferences · doi:10.1051/matecconf/201927404001 · Cited by 2
Cited by
Miller, S. A., Habert, G., Myers, R. J., & Harvey, J. T. (2021) · One Earth · doi:10.1016/j.oneear.2021.09.011 · Cited by 308
Pathways towards sustainable concrete
Coffetti, D., Crotti, E., Gazzaniga, G., Carrara, M., Pastore, T., & Coppola, L. (2022) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.106718 · Cited by 274
Scope, C., Guenther, E., Schütz, J., Mielecke, T., Mündecke, E., Schultze, K., & Saling, P. (2020) · Civil Engineering Design · doi:10.1002/cend.202000024 · Cited by 22
Metadata
- Authors
- de Brito, J., & Kurda, R.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 281
- Pages
- 123558
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3086090482
- Cited by
- 436
- References
- 878
- FWCI
- 30.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.