The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
A technical review on composite phase change material based secondary assisted battery thermal management system for electric vehicles
Abstract
Abstract Battery Thermal Management System (BTMS) plays a significant role in determining the Electric vehicles (EVs) operating range and battery operating life cycle. Indeed, Phase Change Material (PCM) with outstanding characteristics like passive energy utilization to cool the battery, low cost, and effective operation seems to be an attractive option to be used for BTMS of EVs. However, opting for an exact PCM for the required application of the battery system depends completely on the thermal properties of PCM. Therefore, drawbacks and the advancement of PCM integrated BTMS compared to others should be scrutinized to have a comprehensive assessment on the PCM-integrated BTMS. The present review article majorly focuses on: i) - Advanced thermal properties of organic, inorganic, and eutectic PCM for integration with BTMS; ii) - Secondary assisted PCM cooling system for BTMS; iii) - Experimental development carried out with incorporation of composite PCM with BTMS; iv) - Economic comparative analysis on integrating PCM with EVs; v) - Critical analysis on environmental benefits of PCM based BTMS for EVs. In addition, the key outcomes of utilizing nanoparticle dispersed PCM into battery systems are highlighted. A separate section has been elaborated on the techniques used to overcome the drawbacks of thermal conductivity in PCMs. Finally, critical analysis and consolidation of experimentally hybridized and analyzed composite PCM for performance enhancement of batteries presented in the article would be a hot spot for future research work on EVs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermal properties of graphene and nanostructured carbon materials
Balandin, A. A. (2011) · Nature Materials · doi:10.1038/nmat3064 · Cited by 6,244
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Recent developments in phase change materials for energy storage applications: A review
Nazir, H., Batool, M., Bolivar Osorio, F. J., Isaza-Ruiz, M., Xu, X., Vignarooban, K., Phelan, P., Inamuddin, & Kannan, A. M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.09.126 · Cited by 1,522
Heyhat, M. M., Mousavi, S., & Siavashi, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101235 · Cited by 527
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Zou, D., Ma, X., Liu, X., Zheng, P., & Hu, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.024 · Cited by 461
Phase-change materials (PCM) for automotive applications: a review
Jaguemont, J., Omar, N., Van den Bossche, P., & Mierlo, J. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.097 · Cited by 451
Jiang, Z. Y., & Qu, Z. G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.043 · Cited by 380
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Cradle-to-Gate Emissions from a Commercial Electric Vehicle Li-Ion Battery: A Comparative Analysis
Kim, H. C., Wallington, T. J., Arsenault, R., Bae, C., Ahn, S., & Lee, J. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00830 · Cited by 312
Particulate matter formation and its control methodologies for diesel engine: A comprehensive review
Mohankumar, S., & Senthilkumar, P. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.133 · Cited by 267
Micro/nano-encapsulated phase change materials (PCMs) as emerging materials for the food industry
Alehosseini, E., & Jafari, S. M. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.07.003 · Cited by 242
Tagliaferri, C., Evangelisti, S., Acconcia, F., Domenech, T., Ekins, P., Barletta, D., & Lettieri, P. (2016) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2016.07.003 · Cited by 228
Huang, R., Li, Z., Hong, W., Wu, Q., & Yu, X. (2020) · Energy Reports · doi:10.1016/j.egyr.2019.09.060 · Cited by 210
Ali, A., & Söffker, D. (2018) · Energies · doi:10.3390/en11030476 · Cited by 134
Cited by
Zhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Nano-enhanced phase change materials: Fundamentals and applications
Said, Z., Pandey, A. K., Tiwari, A. K., Kalidasan, B., Jamil, F., Thakur, A. K., Tyagi, V. V., Sarı, A., & Ali, H. M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2024.101162 · Cited by 386
Self-citationHoang, A. T., Foley, A. M., Nižetić, S., Huang, Z., Ong, H. C., Ölçer, A. I., Pham, V. V., & Nguyen, X. P. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.131772 · Cited by 321
Self-citationWeng, J., Huang, Q., Li, X., Zhang, G., Ouyang, D., Chen, M., Yuen, A. C. Y., Li, A., Lee, E. W. M., Yang, W., et al. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2022.09.007 · Cited by 297
Zhang, J., Shao, D., Jiang, L., Zhang, G., Wu, H., Day, R., & Jiang, W. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112207 · Cited by 263
Metadata
- Authors
- Subramanian, M., Hoang, A. T., B, K., Nižetić, S., Solomon, J. M., Balasubramanian, D., C, S., G, T., Metghalchi, H., & Nguyen, X. P.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-11
- Volume
- 322
- Pages
- 129079
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3201309807
- Cited by
- 231
- References
- 15
- FWCI
- 12.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.