The DOI matches its Crossref record; 187 of the 187 references it cites were found in a registry or an index.
Sustainable biobased composites for advanced applications: recent trends and future opportunities – A critical review
Open accessAbstract
The rising environmental and sustainability consciousness has motivated efforts for configuring biobased composite materials for different end-use applications and as a novel alternative to conventional non-renewable synthetic fibers such as glass and carbon reinforced composites. On the other hand, biocomposite materials are not a problem-free substitute, and they have some drawbacks such as poor moisture resistance (hydrophilicity), fiber/matrix incompatibility, supply logistic issues, low thermal stability, flammability, poor electrical properties, extraction, processing, surface modification, machining, manufacturing and characterization associated challenges, and highly anisotropic properties. In recent times, extensive research has been performed to address the challenges allied with long-term durability, reliability, serviceability, properties and sustainable production (via adopting a circular economy in biocomposites). This article presents a critical review of the recent works allied with different aspects of biocomposites. We initially review the overall characteristic including, the extraction, chemical composition, and physical and mechanical properties of the most popular biopolymers and biofibers (based on natural and synthetic resources) employed for fabricating biocomposites. The approaches and advances in enhancing the properties of biocomposites are also reviewed, including fiber treatment and modification, fiber hybridization, incorporation of fillers, advanced manufacturing techniques, and exploration of new biofiber and polymer resources. Also, the present techniques and the developments employed for the manufacturing of biocomposites are discussed, with an emphasis on additive manufacturing techniques (AM) in order to meet the aspirations of lightweight composites. The opportunities and challenges allied with fused filament fabrication (FFF) AM of biocomposite are also discussed in detail. Finally, the characterization techniques, environmental effects, major applications, and trends and challenges of biocomposites are briefly discussed. This review article provides vital information on advanced bio-based materials and their composites for their prospective usage in different high-performance applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
A review of recent developments in natural fibre composites and their mechanical performance
Pickering, K. L., Efendy, M. G. A., & Le, T. M. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.08.038 · Cited by 3,479
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review
Li, X., Tabil, L. G., & Panigrahi, S. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0042-3 · Cited by 2,921
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Synthesis, structure and properties of polyhydroxyalkanoates: biological polyesters
Sudesh, K., Abe, H., & Doi, Y. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00035-6 · Cited by 2,254
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Tokiwa, Y., Calabia, B. P., Ugwu, C. U., & Aiba, S. (2009) · International Journal of Molecular Sciences · doi:10.3390/ijms10093722 · Cited by 1,782
(2026) · Key engineering materials · doi:10.4028/www.scientific.net/kem · Cited by 1,727
Characterization and properties of natural fiber polymer composites: A comprehensive review
Sanjay, M. R., Madhu, P., Jawaid, M., Senthamaraikannan, P., Senthil, S., & Pradeep, S. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.101 · Cited by 1,652
DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622
Self-citationCellulosic/synthetic fibre reinforced polymer hybrid composites: A review
Jawaid, M., & Abdul Khalil, H. P. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.04.043 · Cited by 1,567
Natural-fiber-reinforced polymer composites in automotive applications
Holbery, J., & Houston, D. (2006) · JOM · doi:10.1007/s11837-006-0234-2 · Cited by 1,565
Flax fibre and its composites – A review
Yan, L., Chouw, N., & Jayaraman, K. (2014) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2013.08.014 · Cited by 1,454
Biodegradable composites based on lignocellulosic fibers—An overview
Satyanarayana, K. G., Arizaga, G. G. C., & Wypych, F. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.12.002 · Cited by 1,421
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Gurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Green composites: A review of adequate materials for automotive applications
Koronis, G., Silva, A., & Fontul, M. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.07.004 · Cited by 1,198
Polyhydroxyalkanoates: an overview
Reddy, C. S. K., Ghai, R., Rashmi, & Kalia, V. C. (2003) · Bioresource Technology · doi:10.1016/s0960-8524(02)00212-2 · Cited by 1,151
Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production
Vink, E. T. H., Rábago, K. R., Glassner, D. A., & Gruber, P. R. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00372-5 · Cited by 1,092
Soy proteins: A review on composition, aggregation and emulsification
Nishinari, K., Fang, Y., Guo, S., & Phillips, G. O. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.01.013 · Cited by 1,009
M.R., S., Siengchin, S., Parameswaranpillai, J., Jawaid, M., Pruncu, C. I., & Khan, A. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.083 · Cited by 999
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Recent progress of reinforcement materials: a comprehensive overview of composite materials
Rajak, D. K., Pagar, D. D., Kumar, R., & Pruncu, C. I. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.09.068 · Cited by 883
Naser, A. Z., Deiab, I., & Darras, B. M. (2021) · RSC Advances · doi:10.1039/d1ra02390j · Cited by 836
Biodegradable Multiphase Systems Based on Plasticized Starch: A Review
Avérous, L. (2004) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-200029326 · Cited by 834
Vinod, A., Sanjay, M. R., Suchart, S., & Jyotishkumar, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120978 · Cited by 828
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Natural fibre-reinforced composites for bioengineering and environmental engineering applications
Cheung, H.-Y., Ho, M.-P., Lau, K.-T., Cardona, F., & Hui, D. (2009) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.04.014 · Cited by 769
Recent advances in microbial polyhydroxyalkanoates
Khanna, S., & Srivastava, A. K. (2005) · Process Biochemistry · doi:10.1016/j.procbio.2004.01.053 · Cited by 762
Recent advancements of plant-based natural fiber–reinforced composites and their applications
Li, M., Pu, Y., Thomas, V. M., Yoo, C. G., Ozcan, S., Deng, Y., Nelson, K., & Ragauskas, A. J. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108254 · Cited by 755
A review of bast fibres and their composites. Part 1 – Fibres as reinforcements
Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683
Epoxy clay nanocomposites – processing, properties and applications: A review
Azeez, A. A., Rhee, K. Y., Park, S. J., & Hui, D. (2013) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2012.04.012 · Cited by 660
Green composites: a review of material attributes and complementary applications
Dicker, M. P. M., Duckworth, P. F., Baker, A. B., Francois, G., Hazzard, M. K., & Weaver, P. M. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.014 · Cited by 650
Netravali, A. N., & Chabba, S. (2003) · Materials Today · doi:10.1016/s1369-7021(03)00427-9 · Cited by 649
Machining of Polymer Composites
Sheikh-Ahmad, J. Y. (2009) · Springer eBooks · doi:10.1007/978-0-387-68619-6 · Cited by 644
Biocomposites based on plasticized starch: thermal and mechanical behaviours
Averous, L., & Boquillon, N. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.11.015 · Cited by 629
Additive manufacturing of natural fiber reinforced polymer composites: Processing and prospects
Balla, V. K., Kate, K. H., Satyavolu, J., Singh, P., & Tadimeti, J. G. D. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.106956 · Cited by 580
Sell, S. A., Wolfe, P. S., Garg, K., McCool, J. M., Rodriguez, I. A., & Bowlin, G. L. (2010) · Polymers · doi:10.3390/polym2040522 · Cited by 578
Structure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials
Petersson, L., Kvien, I., & Oksman, K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.012 · Cited by 576
Zini, E., & Scandola, M. (2011) · Polymer Composites · doi:10.1002/pc.21224 · Cited by 534
Mechanical properties of polypropylene composites: A review
Shubhra, Q. T., Alam, A., & Quaiyyum, M. (2013) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705711428659 · Cited by 508
The importance of carbon fiber to polymer additive manufacturing
Love, L. J., Kunc, V., Rios, O., Duty, C. E., Elliott, A. M., Post, B. K., Smith, R. J., & Blue, C. A. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.212 · Cited by 493
Properties and performance of natural-fibre composites
Pickering, K. L. (2008) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845694593 · Cited by 484
Sreekala, M. S., George, J., Kumaran, M. G., & Thomas, S. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00219-6 · Cited by 482
Recent advancement in the natural fiber polymer composites: A comprehensive review
Vigneshwaran, S., Sundarakannan, R., John, K. M., Joel Johnson, R. D., Prasath, K. A., Ajith, S., Arumugaprabu, V., & Uthayakumar, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.124109 · Cited by 465
Effects of environmental conditions on mechanical and physical properties of flax fibers
Stamboulis, A. G., Baillie, C. A., & Peijs, T. (2001) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00032-x · Cited by 463
Toughening of photo-curable polymer networks: a review
Ligon-Auer, S. C., Schwentenwein, M., Gorsche, C., Stampfl, J., & Liska, R. (2016) · Polymer Chemistry · doi:10.1039/c5py01631b · Cited by 447
Cao, Y., Shibata, S., & Fukumoto, I. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.045 · Cited by 446
Yan, L., Chouw, N., & Yuan, X. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684412439494 · Cited by 429
Panthapulakkal, S., & Sain, M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25486 · Cited by 408
Goriparthi, B. K., Suman, K. N. S., & Rao, N. M. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.05.007 · Cited by 400
Mechanical property evaluation of natural fiber coir composite
Harish, S., Michael, D. P., Bensely, A., Lal, D. M., & Rajadurai, A. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.001 · Cited by 395
A review of the European passenger car regulations – Real driving emissions vs local air quality
Hooftman, N., Messagie, M., Van Mierlo, J., & Coosemans, T. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.01.012 · Cited by 381
Yang, X., Liang, C., Ma, T., Guo, Y., Kong, J., Gu, J., Chen, M., & Zhu, J. (2018) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0031-8 · Cited by 372
Thermal decomposition of wood: Kinetics and degradation mechanisms
Poletto, M., Zattera, A. J., & Santana, R. M. C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.08.133 · Cited by 331
Mohanty, A. K., Wibowo, A., Misra, M., & Drzal, L. T. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.015 · Cited by 317
Sun, F., Zhou, H., & Lee, J. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.07.002 · Cited by 310
Gas barrier properties of polymer/clay nanocomposites
Cui, Y., Kumar, S., Rao Kona, B., & van Houcke, D. (2015) · RSC Advances · doi:10.1039/c5ra10333a · Cited by 308
Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites
Chen, H., Miao, M., & Ding, X. B. (2009) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.09.003 · Cited by 308
Dynamical mechanical analysis of sisal/oil palm hybrid fiber‐reinforced natural rubber composites
Jacob, M., Francis, B., Thomas, S., & Varughese, K. T. (2006) · Polymer Composites · doi:10.1002/pc.20250 · Cited by 308
Flammability of Natural Fiber-reinforced Composites and Strategies for Fire Retardancy: A Review
Chapple, S., & Anandjiwala, R. (2010) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705709356338 · Cited by 303
Design of biocomposite materials for bone tissue regeneration
Yunus Basha, R., T.S., S. K., & Doble, M. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.07.016 · Cited by 299
Environmental Durability of Flax Fibres and their Composites based on Polypropylene Matrix
Stamboulis, A., Baillie, C. A., Garkhail, S. K., van Melick, H. G. H., & Peijs, T. (2000) · Applied Composite Materials · doi:10.1023/a:1026581922221 · Cited by 291
Hemp fiber reinforced polypropylene composites: The effects of material treatments
Sullins, T., Pillay, S., Komus, A., & Ning, H. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2017.02.001 · Cited by 291
Potential of kenaf fibres as reinforcement for tribological applications
Chin, C. W., & Yousif, B. F. (2009) · Wear · doi:10.1016/j.wear.2009.06.002 · Cited by 288
Biopolymer-based biomaterials for accelerated diabetic wound healing: A critical review
Shah, S. A., Sohail, M., Khan, S., Minhas, M. U., de Matas, M., Sikstone, V., Hussain, Z., Abbasi, M., & Kousar, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.08.007 · Cited by 288
Natural fiber-reinforced polymer composites
Taj, S. A., Khan, S., & Munawar, M. A. (2007) · Proceedings of the Pakistan Academy of Sciences · Cited by 287
Environmental dependence of inbreeding depression and purging in Drosophila melanogaster
Bijlsma, Bundgaard, & Putten, V. (1999) · Journal of Evolutionary Biology · doi:10.1046/j.1420-9101.1999.00113.x · Cited by 282
L (+) lactic acid fermentation and its product polymerization
Srivastava, A., Narayanan, N., & Roychoudhury, P. K. (2004) · Electronic Journal of Biotechnology · doi:10.2225/vol7-issue2-fulltext-7 · Cited by 280
Gassan, J. (2002) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(01)00116-6 · Cited by 271
Moisture absorption studies of sisal fibre reinforced polypropylene composites
CHOW, C., Xing, X., & Li, R. K. Y. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.08.005 · Cited by 251
Venkateshwaran, N., Elaya Perumal, A., & Arunsundaranayagam, D. (2013) · Materials & Design · doi:10.1016/j.matdes.2012.12.001 · Cited by 250
Lee, B.-H., Kim, H.-S., Lee, S., Kim, H.-J., & Dorgan, J. R. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.07.015 · Cited by 237
A review on synthesis and characterization of commercially available natural fibers: Part-I
Puttegowda, M., Rangappa, S. M., Senthamaraikannan, P., Pradeep, S., Saravanakumar, S. S., & Yogesha, B. (2018) · Journal of Natural Fibers · doi:10.1080/15440478.2018.1453433 · Cited by 232
Study on short ramie fiber/poly(lactic acid) composites compatibilized by maleic anhydride
Yu, T., Jiang, N., & Li, Y. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.05.008 · Cited by 226
Huda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008) · Composite Interfaces · doi:10.1163/156855408783810920 · Cited by 220
A review on synthesis and characterization of commercially available natural fibers: Part II
Puttegowda, M., Rangappa, S. M., Senthamaraikannan, P., Pradeep, S., Saravanakumar, S. S., & Yogesha, B. (2017) · Journal of Natural Fibers · doi:10.1080/15440478.2017.1379045 · Cited by 220
Circular economy in biocomposite development: State-of-the-art, challenges and emerging trends
Shanmugam, V., Mensah, R. A., Försth, M., Sas, G., Restás, Á., Addy, C., Xu, Q., Jiang, L., Neisiany, R. E., Singha, S., et al. (2021) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2021.100138 · Cited by 218
Review on flammability of biofibres and biocomposites
Mngomezulu, M. E., John, M. J., Jacobs, V., & Luyt, A. S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.071 · Cited by 217
Review on hygroscopic aging of cellulose fibres and their biocomposites
Mokhothu, T. H., & John, M. J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.06.027 · Cited by 212
Sinha, E., & Panigrahi, S. (2009) · Journal of Composite Materials · doi:10.1177/0021998309338078 · Cited by 211
Marais, S., Gouanvé, F., Bonnesoeur, A., Grenet, J., Poncin‐Epaillard, F., Morvan, C., & Métayer, M. L. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.11.008 · Cited by 208
Fabrication and characterisation of chitosan nanoparticles/plasticised-starch composites
Chang, P. R., Jian, R., Yu, J., et al. (2009) · Food Chemistry · doi:10.1016/j.foodchem.2009.11.002 · Cited by 208
Lodha, P., & Netravali, A. N. (2005) · Industrial Crops and Products · doi:10.1016/j.indcrop.2003.12.006 · Cited by 207
Luz, S. M., Del Tio, J., Rocha, G. J. M., Gonçalves, A. R., & Del’Arco, A. P. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.04.014 · Cited by 198
Effect of chemical treatment on the thermal properties of hybrid natural fiber‐reinforced composites
Neto, J. S. S., Lima, R. D. A. A., Cavalcanti, D. K. K., de Souza, J. P. B., de Aguiar, R. A. A., & Banea, M. D. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47154 · Cited by 195
Environmental benign natural fibre reinforced thermoplastic composites: A review
Awais, H., Nawab, Y., Amjad, A., Anjang, A., Md Akil, H., & Zainol Abidin, M. S. (2021) · Composites Part C: Open Access · doi:10.1016/j.jcomc.2020.100082 · Cited by 192
Atomic force microscopy characterization of the surface wettability of natural fibres
Pietak, A., Korte, S., Tan, E., Downard, A., & Staiger, M. P. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2006.07.082 · Cited by 187
Selective laser sintering of hydroxyapatite/poly-ε-caprolactone scaffolds
Eosoly, S., Brabazon, D., Lohfeld, S., & Looney, L. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.07.018 · Cited by 186
Effects of plasma treatment in enhancing the performance of woodfibre-polypropylene composites
Yuan, X., Jayaraman, K., & Bhattacharyya, D. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2004.06.023 · Cited by 184
Mohanty, A. K., Drzal, L. T., & Misra, M. (2002) · Journal of Adhesion Science and Technology · doi:10.1163/156856102760146129 · Cited by 175
Studies on Natural/Glass Fiber Reinforced Polymer Hybrid Composites: An Evolution
Sanjay, M., & Yogesha, B. (2017) · Materials Today: Proceedings · doi:10.1016/j.matpr.2017.02.151 · Cited by 174
Rostami, M., Yousefi, M., Khezerlou, A., Aman Mohammadi, M., & Jafari, S. M. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.06.015 · Cited by 174
Muneer Ahmed, M., Dhakal, H. N., Zhang, Z. Y., Barouni, A., & Zahari, R. (2021) · Composite Structures · doi:10.1016/j.compstruct.2020.113496 · Cited by 174
Self-citationPredicting the tensile strength of natural fibre reinforced thermoplastics
Facca, A. G., Kortschot, M. T., & Yan, N. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.018 · Cited by 171
Long term immersion in natural seawater of Flax/PLA biocomposite
Duigou, A. L., Bourmaud, A., Davies, P., & Baley, C. (2014) · Ocean Engineering · doi:10.1016/j.oceaneng.2014.07.021 · Cited by 169
Impact and fatigue behaviour of hemp fibre composites
Yuanjian, T., & Isaac, D. H. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.03.039 · Cited by 167
Bio-LDH nanohybrid for gene therapy
Kwak, S. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00714-2 · Cited by 167
Maehara, H., Sotome, S., Yoshii, T., Torigoe, I., Kawasaki, Y., Sugata, Y., Yuasa, M., Hirano, M., Mochizuki, N., Kikuchi, M., et al. (2010) · Journal of Orthopaedic Research · doi:10.1002/jor.21032 · Cited by 166
Rosli, N. A. H., Loh, K. S., Wong, W. Y., Yunus, R. M., Lee, T. K., Ahmad, A., & Chong, S. T. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21020632 · Cited by 165
Morphological and crystalline characterization of NaOH and NaOCl treated Agave americana L. fiber
Oudiani, A. E., Chaabouni, Y., Msahli, S., & Sakli, F. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2011.09.012 · Cited by 157
Rwawiire, S., Tomková, B., Militký, J., Jabbar, A., & Kale, B. M. (2015) · Composites Part B Engineering · doi:10.1016/j.compositesb.2015.06.021 · Cited by 156
Ragoubi, M., George, B., Molina, S., Bienaimé, D., Merlin, A., Hiver, J. M., & Dahoun, A. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.12.025 · Cited by 154
Thermal stability and flammability of coconut fiber reinforced poly(lactic acid) composites
Jang, J. Y., Jeong, T. K., Oh, H. J., Youn, J. R., & Song, Y. S. (2011) · Composites Part B Engineering · doi:10.1016/j.compositesb.2011.11.003 · Cited by 154
Barari, B., Omrani, E., Moghadam, A. D., Menezes, P. L., Pillai, K. M., & Rohatgi, P. K. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.097 · Cited by 151
Influence of fiber treatment on the performance of sisal–polypropylene composites
Mohanty, S., Verma, S. K., NAYAK, S. K., & Tripathy, S. S. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21161 · Cited by 142
Souzandeh, H., Wang, Y., Netravali, A. N., & Zhong, W.-H. K. (2019) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2019.1599391 · Cited by 142
(2020) · Elsevier eBooks · doi:10.1016/c2018-0-01614-x · Cited by 140
Thermoelectric Energy Harvesting: Basic Principles and Applications
Enescu, D. (2019) · IntechOpen eBooks · doi:10.5772/intechopen.83495 · Cited by 138
Recent advances in thermal properties of hybrid cellulosic fiber reinforced polymer composites
Krishnasamy, S., Thiagamani, S. M. K., Muthukumar, C., Rajini, N., Shahroze, R. M., Siengchin, S., Ismail, S. O., & Devi, M. P. I. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.08.231 · Cited by 137
Correlation of the thermal stability and the decomposition kinetics of six different vegetal fibers
Ornaghi, H. L., Poletto, M., Zattera, A. J., & Amico, S. C. (2013) · Cellulose · doi:10.1007/s10570-013-0094-1 · Cited by 136
Emerging trends in graphene carbon based polymer nanocomposites and applications
Idumah, C. I., & Hassan, A. (2016) · Reviews in Chemical Engineering · doi:10.1515/revce-2015-0038 · Cited by 135
A systematic literature review on less common natural fibres and their biocomposites
Fabrizio Sarasini, A., & Fiore, V. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.197 · Cited by 132
Sotome, S., Uemura, T., Kikuchi, M., Chen, J., Itoh, S., Tanaka, J., Tateishi, T., & Shinomiya, K. (2004) · Materials Science and Engineering C · doi:10.1016/j.msec.2003.12.003 · Cited by 131
Nogi, M., Ifuku, S., Abe, K., Handa, K., Nakagaito, A. N., & Yano, H. (2006) · Applied Physics Letters · doi:10.1063/1.2191667 · Cited by 128
Composition and structure study of natural Nelumbo nucifera fiber
Liu, D., Han, G., Huang, J., & Zhang, Y. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.06.003 · Cited by 125
Studies of acetylation of jute using simplified procedure and its characterization
Rana, A. K., Basak, R. K., Mitra, B. C., Lawther, M., & Banerjee, A. N. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970523)64:8<1517::aid-app9>3.0.co;2-k · Cited by 123
Nagarajan, K. J., Balaji, A. N., & Ramanujam, N. R. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.02.063 · Cited by 122
Correa, D., Poppinga, S., Mylo, M. D., Westermeier, A. S., Bruchmann, B., Menges, A., & Speck, T. (2020) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2019.0445 · Cited by 122
Feather Fiber Reinforced Light-Weight Composites with Good Acoustic Properties
Huda, S., & Yang, Y. (2009) · Journal of Polymers and the Environment · doi:10.1007/s10924-009-0130-2 · Cited by 121
Liao, S., Watari, F., Zhu, Y., Uo, M., Akasaka, T., Wang, W., Xu, G., & Cui, F. (2006) · Dental Materials · doi:10.1016/j.dental.2006.06.045 · Cited by 118
Intermolecular interactions between natural polysaccharides and silk fibroin protein
Shang, S., Zhu, L., & Fan, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.12.038 · Cited by 114
Overview of Protein‐Based Biopolymers for Biomedical Application
Nagarajan, S., Radhakrishnan, S., Kalkura, S. N., Balme, S., Miele, P., & Bechelany, M. (2019) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201900126 · Cited by 113
Dynamic and thermo‐mechanical properties of hybridized kenaf/PALF reinforced phenolic composites
Asim, M., Jawaid, M., Paridah, M. T., Saba, N., Nasir, M., & Shahroze, R. M. (2019) · Polymer Composites · doi:10.1002/pc.25240 · Cited by 107
Green Biocomposites for Thermoelectric Wearable Applications
Cataldi, P., Cassinelli, M., Heredia‐Guerrero, J. A., Guzmán‐Puyol, S., Naderizadeh, S., Athanassiou, A., & Caironi, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201907301 · Cited by 107
Poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate)‐based biocomposites reinforced with kenaf fibers
Avella, M., Bogoeva‐Gaceva, G., Bužarovska, A., et al. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26057 · Cited by 106
Pickering, K. L., Sawpan, M. A., Jayaraman, J., & Fernyhough, A. (2011) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.04.020 · Cited by 106
Mechanical Properties of Hemp‐Fibre‐Reinforced Euphorbia Composites
Mwaikambo, L. Y., Tucker, N., & Clark, A. J. (2007) · Macromolecular Materials and Engineering · doi:10.1002/mame.200700092 · Cited by 103
Specific features of flax fibres used to manufacture composite materials
Baley, C., Gomina, M., Bréard, J., Bourmaud, A., Drapier, S., Ferreira, M., Duigou, A. L., Liotier, P., Ouagne, P., Soulat, D., et al. (2018) · International Journal of Material Forming · doi:10.1007/s12289-018-1455-y · Cited by 103
Pandita, S. D., Yuan, X., Manan, M. A., Lau, C. H., Subramanian, A. S., & Wei, J. (2013) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684413505349 · Cited by 102
Moriana, R., Vilaplana, F., Karlsson, S., & Ribes-Greus, A. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.10.001 · Cited by 100
Interfacial Modification of Hemp Fiber Reinforced Composites Using Fungal and Alkali Treatment
Pickering, K. L., Li, Y., Farrell, R. L., & Lay, M. (2007) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2007.1984 · Cited by 100
Elomaa, L., Kokkari, A. K., Närhi, T. O., et al. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.10.014 · Cited by 98
Biodegradable polymer solar cells
Strange, M., Plackett, D., Kaasgaard, M., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.02.002 · Cited by 98
Natural fibres actuators for smart bio-inspired hygromorph biocomposites
Duigou, A. L., Réquilé, S., Beaugrand, J., Scarpa, F. L., & Castro, M. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa9410 · Cited by 97
Saenghirunwattana, P., Noomhorm, A., & Rungsardthong, V. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.06.010 · Cited by 89
Functional properties of extruded foam composites of starch acetate and corn cob fiber
Guan, J., & Hanna, M. A. (2003) · Industrial Crops and Products · doi:10.1016/j.indcrop.2003.10.007 · Cited by 89
Oushabi, A. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107059 · Cited by 88
Witt, C., Mäder, K., & Kissel, T. (2000) · Biomaterials · doi:10.1016/s0142-9612(99)00262-8 · Cited by 86
Plasma treatment of sisal fibres and its effects on tensile strength and interfacial bonding
Yuan, X., Jayaraman, K., & Bhattacharyya, D. (2002) · Journal of Adhesion Science and Technology · doi:10.1163/156856102760099898 · Cited by 86
Analysis of green hemp fibre reinforced composites using bag retting and white rot fungal treatments
Li, Y., Pickering, K. L., & Farrell, R. L. (2008) · Industrial Crops and Products · doi:10.1016/j.indcrop.2008.08.005 · Cited by 82
Studies on polymers and composites from lignin and fiber derived from sugar cane
Doherty, W. O. S., Halley, P. J., Edye, L. A., Rogers, D. G., Cardona, F., Park, Y., & Woo, T. (2007) · Polymers for Advanced Technologies · doi:10.1002/pat.879 · Cited by 81
Zhang, D., Milanovic, N. R., Zhang, Y., Su, F., & Miao, M. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2013.12.031 · Cited by 81
Muthuraj, R., Misra, M., & Mohanty, A. K. (2017) · RSC Advances · doi:10.1039/c6ra27987b · Cited by 74
Francis, A. A., Yang, Y., & Boccaccini, A. R. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.002 · Cited by 69
Bionanocomposites as industrial materials, current and future perspectives: a review
Joseph, B., Krishnan, S., Sagarika, V. K., Tharayil, A., Kalarikkal, N., & Thomas, S. (2020) · Emergent Materials · doi:10.1007/s42247-020-00133-x · Cited by 65
Biopolymer Composites in Photovoltaics and Photodetectors
Mohiuddin, M., Kumar, B. P., & Haque, S. (2016) · Elsevier eBooks · doi:10.1016/b978-0-12-809261-3.00017-6 · Cited by 61
Preparation of natural amphoteric silk nanofibers by acid hydrolysis
Hu, Y., Yu, J., Liu, L., & Fan, Y. (2019) · Journal of Materials Chemistry B · doi:10.1039/c8tb03005g · Cited by 61
Failure Analysis in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites
(2018) · Elsevier eBooks · doi:10.1016/c2016-0-04423-6 · Cited by 61
Manufacturing of Natural Fibre-Reinforced Polymer Composites by Solvent Casting Method
Kong, I., Tshai, K. Y., & Hoque, M. E. (2015) · Springer eBooks · doi:10.1007/978-3-319-07944-8_16 · Cited by 59
Materials for Biomedical Engineering
(2019) · Elsevier eBooks · doi:10.1016/c2017-0-04394-x · Cited by 59
Effect of processing conditions on mechanical and viscoelastic properties of biocomposites
Ali, R., Iannace, S., & Nicolais, L. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11739 · Cited by 58
Chee, S. S., & Jawaid, M. (2019) · Polymers · doi:10.3390/polym11122012 · Cited by 58
Potential of Organosolv Lignin Based Materials in Pressure Sensitive Adhesive Applications
Sivasankarapillai, G., Eslami, E., & Laborie, M. G. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b01670 · Cited by 52
Shape-changing architectural skins
Vazquez, E., Randall, C. A., & Duarte, J. P. (2019) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · doi:10.7480/jfde.2019.2.3877 · Cited by 51
Liu, D., Liu, Z., Zou, J., Li, L., Sui, X., Wang, B., Yang, N., & Wang, B. (2021) · Frontiers in Materials · doi:10.3389/fmats.2021.648980 · Cited by 51
Wang, Y.-W., Wu, Q., & Chen, G. (2004) · Biomacromolecules · doi:10.1021/bm049342d · Cited by 50
Duan, J., Shao, S., Yali, Wang, L., Jiang, P., & Liu, B. (2012) · Iranian Polymer Journal · doi:10.1007/s13726-011-0008-8 · Cited by 49
Polyhydroxyalkanoates for Food Packaging Applications
Ragaert, P., Buntinx, M., Maes, C., Vanheusden, C., Peeters, R., Wang, S., D’hooge, D., & Cardon, L. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-100596-5.22502-x · Cited by 48
Enzymatic treatment of mechanochemical modified natural bamboo fibers
Liu, L., Cheng, L., Huang, L., & Yu, J. (2012) · Fibers and Polymers · doi:10.1007/s12221-012-0600-3 · Cited by 47
Andrew, J. J., Arumugam, V., Ramesh, C., Poorani, S., & Santulli, C. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.05.014 · Cited by 47
Self-citationApplication of Biopolymers in Microencapsulation Processes
Estevinho, B. N., & Rocha, F. A. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-811449-0.00007-4 · Cited by 47
Anjana, A., Raturi, G., Shree, S., Sharma, A. K., Panesar, P. S., & Goswami, S. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.05.037 · Cited by 47
Sajna, V., Mohanty, S., & Nayak, S. K. (2015) · Polymer Composites · doi:10.1002/pc.23779 · Cited by 46
Modification of Cellulose Fiber Surfaces by Use of a Lipase and a Xyloglucan Endotransglycosylase
Gustavsson, M. T., Persson, P. V., Iversen, T., et al. (2004) · Biomacromolecules · doi:10.1021/bm049588i · Cited by 46
Effect of different retting processes on yield and quality of banana pseudostem fiber
Brindha, R., Narayana, C. K., Vijayalakshmi, V. J., & Nachane, R. P. (2017) · Journal of Natural Fibers · doi:10.1080/15440478.2017.1401505 · Cited by 46
Dayo, A. Q., Babar, A. A., Qin, Q., et al. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105653 · Cited by 44
Antimicrobial activity of the biopolymer chitosan against Streptococcus iniae
Beck, B. H., Yildirim‐Aksoy, M., Shoemaker, C. A., Fuller, S. A., & Peatman, E. (2019) · Journal of Fish Diseases · doi:10.1111/jfd.12938 · Cited by 42
Alix, S., Colasse, L., Morvan, C., et al. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.10.092 · Cited by 41
Recycling chicken feathers to produce adsorbent porous keratin-based sponge
Sadeghi, S., Dadashian, F., & Eslahi, N. (2018) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-018-1669-z · Cited by 40
Oxygen‐Inhibition Lithography for the Fabrication of Multipolymeric Structures
Vitale, A., Quaglio, M., Chiodoni, A. M., Bejtka, K., Cocuzza, M., Pirri, C. F., & Bongiovanni, R. M. (2015) · Advanced Materials · doi:10.1002/adma.201501737 · Cited by 34
Biopolymers from Lignocellulosic Biomass
Machado, G., Santos, F., Lourega, R. V., de Mattia, J. L., Faria, D. J., Eichler, P., & Auler, A. (2020) · Wiley eBooks · doi:10.1002/9781119568858.ch7 · Cited by 34
Park, J., Kim, D., & Kim, S. (2003) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.09.009 · Cited by 33
Effect of different cocoon stifling methods on the properties of silk fibroin biomaterials
Aznar‐Cervantes, S. D., Pagán, A., Santesteban, B. M., & Cenís, J. L. (2019) · Scientific Reports · doi:10.1038/s41598-019-43134-5 · Cited by 27
EFFECT OF OIL PALM FIBRES VOLUME FRACTION ON MECHANICAL PROPERTIES OF POLYESTER COMPOSITES
Yousif, B. F. (2010) · International Journal of Modern Physics B · doi:10.1142/s0217979210056633 · Cited by 23
Nano-Biocomposites for Food Packaging
Jiménez, A., & Ruseckaite, R. A. (2012) · Green energy and technology · doi:10.1007/978-1-4471-4108-2_15 · Cited by 21
Borah, H., & Dutta, U. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816683-3.00001-3 · Cited by 18
Tengsuthiwat, J., Yorseng, K., Siengchin, S., & Parameswaranpillai, J. (2019) · Polymer Composites · doi:10.1002/pc.25182 · Cited by 17
Water‐Free Blending of Thermoplastic Starch and Polyethylene for Rotomoulding
Lescher, P., Jayaraman, K., & Bhattacharyya, D. (2008) · Starch - Stärke · doi:10.1002/star.200800041 · Cited by 15
Biocompatible Thermoplastics as Implants/Scaffold
Singh, M., Singh, R., & Dhami, M. K. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00012-2 · Cited by 13
Kardas, I., Lipp‐Symonowicz, B., & Sztajnowski, S. (2009) · Fibres and Textiles in Eastern Europe · Cited by 12
Poly(propylene fumarate)-based biocomposites for tissue engineering applications
Diez-Pascual, A. M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816874-5.00012-8 · Cited by 9
Preliminary retting research on different kenaf cultivars
van der Westhuizen, M. M. (2018) · South African Journal of Plant and Soil · doi:10.1080/02571862.2018.1536931 · Cited by 7
Cited by
3D printing of polylactic acid: recent advances and opportunities
Joseph, T. M., Kallingal, A., Suresh, A. M., Mahapatra, D. K., Hasanin, M. S., Haponiuk, J., & Thomas, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10795-y · Cited by 313
Metadata
- Authors
- Andrew, J. J., & Dhakal, H. N.
- Venue
- Composites Part C: Open Access
- Publisher
- Elsevier BV
- Published
- 2022-03
- Volume
- 7
- Pages
- 100220
- ISSN
- 2666-6820 (ISSN-L)
- OpenAlex
- W4200235349
- Cited by
- 491
- References
- 187
- FWCI
- 22.36
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.