3D printing parameters, supporting structures, slicing, and post-processing procedures of vat-polymerization additive manufacturing technologies: A narrative review
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
OBJECTIVE To review the elements of the vat-polymerization workflow, including the 3D printing parameters, support structures, slicing, and post-processing procedures, as well as how these elements affect the characteristics of the manufactured dental devices. DATA Collection of published articles related to vat-polymerization technologies including manufacturing workflow description, and printing parameters definition and evaluation of its influence on the mechanical properties of vat-polymerized dental devices was performed. SOURCES Three search engines were selected namely Medline/PubMed, EBSCO, and Cochrane. A manual search was also conducted. STUDY SELECTION The selection of the optimal printing and supporting parameters, slicing, and post-processing procedures based on dental application is in continuous improvement. As well as their influence on the characteristics of the additively manufactured (AM) devices such as surface roughness, printing accuracy, and mechanical properties of the dental device. RESULTS The accuracy and properties of the AM dental devices are influenced by the manufacturing trinomial namely technology, printer, and material selected. The printing parameters, printing structures, slicing methods, and the post-processing techniques significantly influence on the surface roughness, printing accuracy, and mechanical properties of the manufactured dental device; however, the optimization of each one may vary depending on the clinical application of the additively manufactured device. CONCLUSIONS The printing parameters, supporting structures, slicing, and post-processing procedures have been identified, but further studies are required to determine the optimal manufacturing protocol and enhance the properties of the AM polymer dental devices. CLINICAL SIGNIFICANCE The understanding of the factors involved in the additive manufacturing workflow leads to a printing success and better outcome of the additively manufactured dental device.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Manufacturing engineering and technology
(1990) · Choice Reviews Online · doi:10.5860/choice.27-5145 · Cited by 1,595
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
The future of dental devices is digital
van Noort, R. (2012) · Dental Materials · doi:10.1016/j.dental.2011.10.014 · Cited by 1,408
Manufacturing engineering and technology
Ghosh, S. K. (1991) · Journal of Materials Processing Technology · doi:10.1016/0924-0136(91)90107-p · Cited by 688
Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer
Kodama, H. (1981) · Review of Scientific Instruments · doi:10.1063/1.1136492 · Cited by 668
Revilla‐León, M., & Özcan, M. (2019) · Journal of Prosthodontics · doi:10.1111/jopr.12801 · Cited by 639
Self-citationOverview of Current Additive Manufacturing Technologies and Selected Applications
Horn, T. J., & Harrysson, O. L. A. (2012) · Science Progress · doi:10.3184/003685012x13420984463047 · Cited by 542
Alharbi, N. M., Osman, R. B., & Wismeijer, D. (2016) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2015.12.002 · Cited by 473
The use of UV irradiation in polymerization
Decker, C. (1998) · Polymer International · doi:10.1002/(sici)1097-0126(199802)45:2<133::aid-pi969>3.0.co;2-f · Cited by 423
Shim, J. S., Kim, J.-E., Jeong, S. H., Choi, Y. J., & Ryu, J. J. (2020) · The Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2019.05.034 · Cited by 418
Oropallo, W., & Piegl, L. A. (2015) · Engineering With Computers · doi:10.1007/s00366-015-0407-0 · Cited by 406
Unkovskiy, A., Bui, P. H.-B., Schille, C., Geis-Gerstorfer, J., Huettig, F., & Spintzyk, S. (2018) · Dental Materials · doi:10.1016/j.dental.2018.09.011 · Cited by 378
Slicing procedures in layered manufacturing: a review
Mohan Pandey, P., Venkata Reddy, N., & Dhande, S. G. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310502185 · Cited by 349
Slicing procedures for layered manufacturing techniques
Dolenc, A., & Mäkelä, I. (1994) · Computer-Aided Design · doi:10.1016/0010-4485(94)90032-9 · Cited by 341
Cure depth in photopolymerization: Experiments and theory
Lee, J. H., Prud'homme, R. K., & Aksay, I. A. (2001) · Journal of Materials Research · doi:10.1557/jmr.2001.0485 · Cited by 312
Multi‐objective optimization of part‐ building orientation in stereolithography
Cheng, W., Fuh, J. Y. H., Nee, A. Y. C., Wong, Y. S., Loh, H. T., & Miyazawa, T. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510104429 · Cited by 267
Rapid Prototyping Technologies and their Applications in Prosthodontics, a Review of Literature.
Torabi, K., Farjood, E., & Hamedani, S. (2015) · PubMed · Cited by 260
Kim, D., Shim, J.-S., Lee, D., Shin, S.-H., Nam, N.-E., Park, K.-H., Shim, J.-S., & Kim, J.-E. (2020) · Polymers · doi:10.3390/polym12112762 · Cited by 253
Surface Quality of 3D-Printed Models as a Function of Various Printing Parameters
Arnold, C., Monsees, D., Hey, J., & Schweyen, R. (2019) · Materials · doi:10.3390/ma12121970 · Cited by 223
Taormina, G., Sciancalepore, C., Messori, M., & Bondioli, F. (2018) · Journal of Applied Biomaterials & Functional Materials · doi:10.1177/2280800018764770 · Cited by 217
Revilla‐León, M., Meyers, M. J., Zandinejad, A., & Özcan, M. (2019) · Journal of Esthetic and Restorative Dentistry · doi:10.1111/jerd.12438 · Cited by 204
Self-citationMechanics of shape distortion of DLP 3D printed structures during UV post-curing
Wu, D., Zhao, Z., Zhang, Q., Qi, H. J., & Fang, D. (2019) · Soft Matter · doi:10.1039/c9sm00725c · Cited by 160
Li, Y., Mao, Q., Li, X., Yin, J., Wang, Y., Fu, J., & Huang, Y. H. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100889 · Cited by 128
A process planning method for improving build performance in stereolithography
West, A. P., Sambu, S., & Rosen, D. W. (2001) · Computer-Aided Design · doi:10.1016/s0010-4485(00)00064-6 · Cited by 121
Frontal Conversion and Uniformity in 3D Printing by Photopolymerisation
Vitale, A., & Cabral, J. T. (2016) · Materials · doi:10.3390/ma9090760 · Cited by 120
Sandoval, J. H., Soto, K. F., Murr, L. E., et al. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-1035-2 · Cited by 91
Gurr, M., Hofmann, D., Ehm, M., et al. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800344 · Cited by 84
Color dimensions of additive manufactured interim restorative dental material
Revilla‐León, M., Umorin, M., Özcan, M., & Piedra‐Cascón, W. (2019) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2019.06.001 · Cited by 75
Self-citationA neural network approach to the modelling and analysis of stereolithography processes
Lee, S. H., Park, W. S., Cho, H. S., Zhang, W., & Leu, M. C. (2001) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1177/095440540121501206 · Cited by 72
Propagating waves of network formation induced by light
Cabral, J. T., & Douglas, J. F. (2005) · Polymer · doi:10.1016/j.polymer.2005.02.052 · Cited by 68
Interfacial Profile and Propagation of Frontal Photopolymerization Waves
Vitale, A., Hennessy, M. G., Matar, O. K., & Cabral, J. T. (2014) · Macromolecules · doi:10.1021/ma5021215 · Cited by 66
Determining optimal parameters for stereolithography processes via genetic algorithm
Cho, H. S., Park, W., Choi, B. W., & Leu, M.-C. (2000) · Journal of Manufacturing Systems · doi:10.1016/s0278-6125(00)88887-1 · Cited by 65
3D and 4D Printing in Biomedical Applications
(2018) · Wiley eBooks · doi:10.1002/9783527813704 · Cited by 54
McLaren, E. A. (2011) · PubMed · Cited by 53
Novel polymeric support materials for jetting based additive manufacturing processes
Fahad, M., Dickens, P., & Gilbert, M. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311323245 · Cited by 49
Bonada, J., Muguruza, A., Fernández‐Francos, X., & Ramis, X. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.09.182 · Cited by 44
3D / 4D Printing in Additive Manufacturing: Process Engineering and Novel Excipients
Muehlenfeld, C., & Roberts, S. A. (2018) · Wiley eBooks · doi:10.1002/9783527813704.ch1 · Cited by 11
Cited by
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review
Fatimi, A., Okoro, O. V., Podstawczyk, D., Siminska-Stanny, J., & Shavandi, A. (2022) · Gels · doi:10.3390/gels8030179 · Cited by 276
“Thus, hydrogel-based bio-inks with low shear stress rates at moderate pressures are preferred, since they allow for ideal printing fidelity and the ability to preserve cells alive in in vitro and in vivo conditions [70,196,200,201].”
BackgroundPost-Production Finishing Processes Utilized in 3D Printing Technologies
Kantaros, A., Ganetsos, T., Petrescu, F., Ungureanu, L., & Munteanu, I. (2024) · Processes · doi:10.3390/pr12030595 · Cited by 80
“The inherent nature of AM often yields components with varied surface finishes, imperfect layer adhesion, and inconsistent material properties, necessitating post-processing interventions to rectify these limitations and optimize the functionality of the final product [39].”
Background
Metadata
- Authors
- Piedra-Cascón, W., Krishnamurthy, V. R., Att, W., & Revilla-León, M.
- Venue
- Journal of Dentistry
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 109
- Pages
- 103630
- ISSN
- 0300-5712 (ISSN-L)
- OpenAlex
- W3134301900
- Cited by
- 387
- References
- 38
- FWCI
- 5.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.