The DOI matches its Crossref record; 178 of the 178 references it cites were found in a registry or an index.
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Open accessAbstract
Plastic plays an important role in our daily lives due to its versatility, light weight and low production cost. Plastics became essential in many sectors such as construction, medical, engineering applications, automotive, aerospace, etc. In addition, economic growth and development also increased our demand and dependency on plastics which leads to its accumulation in landfills imposing risk on human health, animals and cause environmental pollution problems such as ground water contamination, sanitary related issues, etc. Hence, a sustainable and an efficient plastic waste treatment is essential to avoid such issues. Pyrolysis is a thermo-chemical plastic waste treatment technique which can solve such pollution problems, as well as, recover valuable energy and products such as oil and gas. Pyrolysis of plastic solid waste (PSW) has gained importance due to having better advantages towards environmental pollution and reduction of carbon footprint of plastic products by minimizing the emissions of carbon monoxide and carbon dioxide compared to combustion and gasification. This paper presents the existing techniques of pyrolysis, the parameters which affect the products yield and selectivity and identify major research gaps in this technology. The influence of different catalysts on the process as well as review and comparative assessment of pyrolysis with other thermal and catalytic plastic treatment methods, is also presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vyazovkin, S., Burnham, A. K., Criado, J. M., Pérez-Maqueda, L. A., Popescu, C., & Sbirrazzuoli, N. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.03.034 · Cited by 5,961
Elements of chemical reaction engineering
Scott Fogler, H. (1987) · Chemical Engineering Science · doi:10.1016/0009-2509(87)80130-6 · Cited by 3,110
Recycling and recovery routes of plastic solid waste (PSW): A review
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,404
Self-citationA review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Biomass resource facilities and biomass conversion processing for fuels and chemicals
Demirbaş, A. (2001) · Energy Conversion and Management · doi:10.1016/s0196-8904(00)00137-0 · Cited by 1,864
Vyazovkin, S., Chrissafis, K., Di Lorenzo, M. L., Koga, N., Pijolat, M., Roduit, B., Sbirrazzuoli, N., & Suñol, J. J. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.05.036 · Cited by 1,330
Biomass Gasifier ''Tars'': Their Nature, Formation, and Conversion
Milne, T. A., Evans, R. J., & Abatzaglou, N. (1998) · doi:10.2172/3726 · Cited by 1,031
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Panda, A. K., Singh, R. K., & Mishra, D. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.005 · Cited by 956
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Pet Waste Management by Chemical Recycling: A Review
Sinha, V., Patel, M. R., & Patel, J. V. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0106-7 · Cited by 853
McKay, G. (2002) · Chemical Engineering Journal · doi:10.1016/s1385-8947(01)00228-5 · Cited by 832
Pyrolysis of waste tyres: A review
Williams, P. T. (2013) · Waste Management · doi:10.1016/j.wasman.2013.05.003 · Cited by 807
Pre-combustion, post-combustion and oxy-combustion in thermal power plant for CO2 capture
Kanniche, M., Gros-Bonnivard, R., Jaud, P., Valle-Marcos, J., Amann, J.-M., & Bouallou, C. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.05.005 · Cited by 796
Methods for polyurethane and polyurethane composites, recycling and recovery: A review
Zia, K. M., Bhatti, H. N., & Ahmad Bhatti, I. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.05.004 · Cited by 786
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Pyrolysis technologies for municipal solid waste: A review
Chen, D., Yin, L., Wang, H., & He, P. (2014) · Waste Management · doi:10.1016/j.wasman.2014.08.004 · Cited by 674
Kunwar, B., Cheng, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 639
Electronic waste recycling: A review of U.S. infrastructure and technology options
Kang, H.-Y., & Schoenung, J. M. (2005) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2005.06.001 · Cited by 593
Pyrolysis of municipal plastic wastes for recovery of gasoline-range hydrocarbons
Demirbas, A. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.03.001 · Cited by 579
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.09.001 · Cited by 528
Self-citationPyrolysis characteristics and kinetics of municipal solid wastes
Sørum, L., Grønli, M. G., & Hustad, J. E. (2001) · Fuel · doi:10.1016/s0016-2361(00)00218-0 · Cited by 527
The formation of dioxins in combustion systems
Stanmore, B. R. (2004) · Combustion and Flame · doi:10.1016/j.combustflame.2003.11.004 · Cited by 492
(2006) · Wiley eBooks · doi:10.1002/0470021543 · Cited by 482
A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading
Butler, E., Devlin, G., Meier, D., & McDonnell, K. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.035 · Cited by 471
Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W. (2015) · International Journal of Green Energy · doi:10.1080/15435075.2014.880146 · Cited by 463
Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 440
Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock
Williams, P. T., & Williams, E. A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00011-x · Cited by 424
Use of different forms of waste plastic in concrete – a review
Sharma, R., & Bansal, P. P. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.08.042 · Cited by 419
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 399
Syamsiro, M., Saptoadi, H., Norsujianto, T., Noviasri, P., Cheng, S., Alimuddin, Z., & Yoshikawa, K. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.01.212 · Cited by 389
Catalytic pyrolysis of polyethylene
Bagri, R., & Williams, P. T. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00139-5 · Cited by 362
Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor
Xue, Y., Zhou, S., Brown, R. C., Kelkar, A., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.033 · Cited by 348
Mastral, F. J., Esperanza, E., Garcı́a, P., & Juste, M. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00137-1 · Cited by 346
Williams, P. T., & Slaney, E. (2007) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2006.12.002 · Cited by 343
Marcilla, A., Beltrán, M. I., & Navarro, R. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.07.026 · Cited by 333
Thermal and kinetic behaviors of biomass and plastic wastes in co-pyrolysis
Çepelioğullar, Ö., & Pütün, A. E. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.06.036 · Cited by 330
Sharma, B. K., Moser, B. R., Vermillion, K. E., Doll, K. M., & Rajagopalan, N. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.01.019 · Cited by 322
Westerhout, R. W. J., Waanders, J., Kuipers, J. A. M., & van Swaaij, W. P. M. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960501m · Cited by 322
Miskolczi, N., Angyal, A., Bartha, L., & Valkai, I. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.04.019 · Cited by 315
Microwave technology for energy-efficient processing of waste
Appleton, T. J., Colder, R. I., Kingman, S. W., Lowndes, I. S., & Read, A. G. (2005) · Applied Energy · doi:10.1016/j.apenergy.2004.07.002 · Cited by 308
Buekens, A. G., & Huang, H. (1998) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(98)00025-1 · Cited by 307
Sakata, Y., Uddin, M. A., & Muto, A. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00013-3 · Cited by 305
Aznar, M. P., Caballero, M. A., Sancho, J. A., & Francés, E. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.09.006 · Cited by 304
Fast pyrolysis of plastic wastes
Scott, D. S., Czernik, S. R., Piskorz, J., & Radlein, D. S. A. G. (1990) · Energy & Fuels · doi:10.1021/ef00022a013 · Cited by 301
Recovery of hydrocarbon liquid from waste high density polyethylene by thermal pyrolysis
Kumar, S., & Singh, R. K. (2011) · Brazilian Journal of Chemical Engineering · doi:10.1590/s0104-66322011000400011 · Cited by 297
Chattopadhyay, J., Pathak, T. S., Srivastava, R., & Singh, A. C. (2016) · Energy · doi:10.1016/j.energy.2016.03.015 · Cited by 291
Devaraj, J., Robinson, Y., & Ganapathi, P. (2015) · Energy · doi:10.1016/j.energy.2015.03.075 · Cited by 284
Singh, R. K., & Ruj, B. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.049 · Cited by 279
Adrados, A., de Marco, I., Caballero, B. M., López, A., Laresgoiti, M. F., & Torres, A. (2012) · Waste Management · doi:10.1016/j.wasman.2011.06.016 · Cited by 275
Arabiourrutia, M., Elordi, G., Lopez, G., Borsella, E., Bilbao, J., & Olazar, M. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.12.012 · Cited by 275
Pyrolysis of synthetic polymers and plastic wastes. Kinetic study
Encinar, J. M., & González, J. F. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.12.011 · Cited by 274
Kumar, S., Prakash, R., Murugan, S., & Singh, R. K. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.028 · Cited by 269
Microwave-Induced Pyrolysis of Plastic Wastes
Ludlow-Palafox, C., & Chase, H. A. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010202j · Cited by 261
The CRC Handbook of Mechanical Engineering
(2004) · CRC Press eBooks · doi:10.1201/9781420041583 · Cited by 260
Feedstock recycling of polyethylene in a two-step thermo-catalytic reaction system
Aguado, J., Serrano, D. P., San Miguel, G., Castro, M. C., & Madrid, S. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.11.008 · Cited by 258
Pyrolysis kinetics and combustion characteristics of waste recovered fuels
Grammelis, P., Basinas, P., Malliopoulou, A., & Sakellaropoulos, G. P. (2008) · Fuel · doi:10.1016/j.fuel.2008.02.002 · Cited by 251
Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity
Artetxe, M., Lopez, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4014869 · Cited by 250
Catalytic Degradation of High-Density Polyethylene over Different Zeolitic Structures
Manos, G., Garforth, A. A., & Dwyer, J. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990512q · Cited by 244
Self-citationPredicting Pyrolysis Products of PE, PP, and PET Using NRTL Activity Coefficient Model
FakhrHoseini, S. M., & Dastanian, M. (2013) · Journal of Chemistry · doi:10.1155/2013/487676 · Cited by 239
Evaluation of pyrolysis process parameters on polypropylene degradation products
Abbas-Abadi, M. S., Haghighi, M. N., Yeganeh, H., & McDonald, A. G. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.023 · Cited by 235
Seo, Y.-H., Lee, K.-H., & Shin, D.-H. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00186-9 · Cited by 233
Bockhorn, H., Hornung, A., & Hornung, U. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(99)00026-1 · Cited by 231
A kinetic study of the hydrolytic degradation of polyethylene terephthalate at high temperatures
Campanelli, J. R., Kamal, M. R., & Cooper, D. G. (1993) · Journal of Applied Polymer Science · doi:10.1002/app.1993.070480309 · Cited by 229
Catalytic stepwise pyrolysis of packaging plastic waste
Lopez-Urionabarrenechea, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.03.004 · Cited by 216
Waste : a handbook for management
Letcher, T. M., & Vallero, D. A. (2011) · Cited by 210
(1999) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(99)96253-7 · Cited by 209
Thermogravimetry as a tool to classify waste components to be used for energy generation
Heikkinen, J. M., Hordijk, J. C., de Jong, W., & Spliethoff, H. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.12.001 · Cited by 204
Pyrolysis of polyolefins for increasing the yield of monomers’ recovery
Donaj, P. J., Kaminsky, W., Buzeto, F., & Yang, W. (2012) · Waste Management · doi:10.1016/j.wasman.2011.10.009 · Cited by 202
Liquid fuel production from waste tyre pyrolysis and its utilisation in a diesel engine
Frigo, S., Seggiani, M., Puccini, M., & Vitolo, S. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.044 · Cited by 201
Olefins from polyolefins and mixed plastics by pyrolysis
Kaminsky, W., Schlesselmann, B., & Simon, C. (1995) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(94)00830-t · Cited by 200
Effect of pressure on thermal degradation of polyethylene
Murata, K., Sato, K., & Sakata, Y. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.08.010 · Cited by 195
Ateş, F., Miskolczi, N., & Borsodi, N. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.01.112 · Cited by 194
Pyrolysis of waste tyres in an atmospheric static-bed batch reactor: Analysis of the gases obtained
Berrueco, C., Esperanza, E., Mastral, F. J., Ceamanos, J., & García-Bacaicoa, P. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.10.007 · Cited by 186
Aromatic chemicals from the catalytic pyrolysis of scrap tyres
Williams, P. T., & Brindle, A. J. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00059-1 · Cited by 184
Efficient disposal of waste polyolefins through microwave assisted pyrolysis
Undri, A., Rosi, L., Frediani, M., & Frediani, P. (2014) · Fuel · doi:10.1016/j.fuel.2013.08.037 · Cited by 182
Mastral, F. J., Esperanza, E., Berrueco, C., Juste, M., & Ceamanos, J. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00068-2 · Cited by 175
The pyrolysis of individual plastics and a plastic mixture in a fixed bed reactor
Williams, E. A., & Williams, P. T. (1997) · Journal of Chemical Technology & Biotechnology · doi:10.1002/(sici)1097-4660(199709)70:1<9::aid-jctb700>3.0.co;2-e · Cited by 175
On the thermal treatment of plastic mixtures of MSW: Pyrolysis kinetics
Wu, C.-H., Chang, C.-Y., Hor, J.-L., Shih, S.-M., Chen, L.-W., & Chang, F.-W. (1993) · Waste Management · doi:10.1016/0956-053x(93)90046-y · Cited by 166
Ponzio, A., Kalisz, S., & Blasiak, W. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.08.002 · Cited by 164
Thermal Lag, Fusion, and the Compensation Effect during Biomass Pyrolysis
Narayan, R., & Antal, M. J. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie950368i · Cited by 163
Microwave Heating Applied to Pyrolysis
Fernandez, Y., Arenillas, A., & Angel, J. (2011) · Advances in Induction and Microwave Heating of Mineral and Organic Materials · doi:10.5772/13548 · Cited by 163
Catalytic pyrolysis of tyres: influence of catalyst temperature
Williams, P. T., & Brindle, A. J. (2002) · Fuel · doi:10.1016/s0016-2361(02)00196-5 · Cited by 159
Thermogravimetric studies on the thermal decomposition of polyethylene
Conesa, J. A., Marcilla, A. F., Font, R., et al. (1996) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(95)00917-5 · Cited by 158
Environmental Performances and Energy Efficiency for MSW Gasification Treatment
Panepinto, D., Tedesco, V., Brizio, E., et al. (2014) · Waste and Biomass Valorization · doi:10.1007/s12649-014-9322-7 · Cited by 158
Fluidised bed pyrolysis of polypropylene over cracking catalysts for producing hydrocarbons
Lin, Y., & Yen, H.-Y. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.01.006 · Cited by 157
Environmental engineering: Stepwise pyrolysis of plastic waste
Bockhorn, H., Hentschel, J., Hornung, A., & Hornung, U. (1999) · Chemical Engineering Science · doi:10.1016/s0009-2509(98)00385-6 · Cited by 156
Kinetics of pyrolysis of high density polyethylene. Comparison of isothermal and dynamic experiments
Ceamanos, J., Mastral, J. F., Millera, Á., & Aldea, M. E. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00183-8 · Cited by 153
Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene
Chin, B. L. F., Yusup, S. B., Shoaibi, A. A., Kannan, P., Srinivasakannan, C., & Sulaıman, S. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.043 · Cited by 153
Garforth, A. A., Lin, Y., Sharratt, P., & Dwyer, J. (1998) · Applied Catalysis A General · doi:10.1016/s0926-860x(98)00022-2 · Cited by 151
Formation and fate of PAH during the pyrolysis and fuel-rich combustion of coal primary tar
Ledesma, E. B., Kalish, M. A., Nelson, P. F., Wornat, M. J., & Mackie, J. C. (2000) · Fuel · doi:10.1016/s0016-2361(00)00044-2 · Cited by 150
Luo, G., Suto, T., Yasu, S., & Katō, K. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00095-1 · Cited by 150
05/00491 Thermogravimetry as a tool to classify waste components to be used for energy generation
(2005) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(05)80492-8 · Cited by 150
Catalytic degradation of plastic waste to liquid fuel over commercial cracking catalysts
Akpanudoh, N. S., Gobin, K., & Manos, G. (2005) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2005.03.009 · Cited by 148
Self-citationKinetic modeling of polyethylene and polypropylene thermal degradation
Ranzi, E., Dente, M., Faravelli, T., Bozzano, G., Fabini, S., Nava, R., Cozzani, V., & Tognotti, L. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(97)00032-6 · Cited by 143
Vacuum pyrolysis of commingled plastics containing PVC I. Kinetic study
Miranda, R., Yang, J. R., Roy, C., & Vasile, C. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00048-9 · Cited by 142
Pyrolysis of composite plastic waste
Cunliffe, A. M., Jones, N., & Williams, P. T. (2003) · Environmental Technology · doi:10.1080/09593330309385599 · Cited by 139
Ismadji, S., Sudaryanto, Y., Hartono, S. B., SETIAWAN, L., & Ayucitra, A. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.11.007 · Cited by 139
Pyrolysis study of polyurethane
Font, R., Fullana, A., Caballero, J. A., Candela, J., & García, A. N. J. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00138-8 · Cited by 139
Stepwise pyrolysis for raw material recovery from plastic waste
Bockhorn, H., Hornung, A., & Hornung, U. (1998) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00066-7 · Cited by 139
Influence of FCC catalyst steaming on HDPE pyrolysis product distribution
Olazar, M., López, G., Amutio, M., Elordi, G., Aguado, R., & Bilbao, J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.10.016 · Cited by 137
Catalytic degradation of polymers: Part III—Degradation of polystyrene
Audisio, G., Bertini, F., Beltrame, P. L., & Carniti, P. (1990) · Polymer Degradation and Stability · doi:10.1016/0141-3910(90)90030-b · Cited by 135
Catalytic pyrolysis of waste plastic from electrical and electronic equipment
Muhammad, C., Onwudili, J. A., & Williams, P. T. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.02.016 · Cited by 133
Thermal and catalytic decomposition behavior of PVC mixed plastic waste with petroleum residue
Ali, M. F., & Siddiqui, M. N. (2005) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.12.010 · Cited by 131
Catalytic pyrolysis of LDPE leads to valuable resource recovery and reduction of waste problems
Shah, J., Jan, M. R., Mabood, F., & Jabeen, F. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.06.016 · Cited by 131
Thermal and catalytic decomposition of mixed plastics
Vasile, C., Pakdel, H., Brebu, M. A., Onu, P., Darie, H., & Ciocâlteu, S. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00151-0 · Cited by 131
Catalytic Cracking of Polyethylene over Clay Catalysts. Comparison with an Ultrastable Y Zeolite
Manos, G., Yusof, I. Y., Papayannakos, N. G., & Gangas, N. H. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie001048o · Cited by 130
Self-citationPyrolysis of waste tyres with zeolite USY and ZSM-5 catalysts
Boxiong, S., Chunfei, W., Guo, B., Wang, R., & Liangcai (2006) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2006.07.006 · Cited by 129
Park, S., Seo, D. K., Lee, S. H., Yu, T.-U., & Hwang, J. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.06.009 · Cited by 126
Gasification characteristics of MSW and an ANN prediction model
Xiao, G., Ni, M., Chi, Y., et al. (2008) · Waste Management · doi:10.1016/j.wasman.2008.02.022 · Cited by 125
Manos, G., Garforth, A. A., & Dwyer, J. P. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990513i · Cited by 122
Self-citationYassin, L., Lettieri, P., Simons, S. J. R., & Germanà, A. (2008) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.06.014 · Cited by 120
Waste as alternative fuel – Minimising emissions and effluents by advanced design
Fodor, Z., & Klemeš, J. J. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2011.09.004 · Cited by 117
Recycling of waste plastics into fuels. LDPE conversion in FCC
Passamonti, F. J., & Sedran, U. (2012) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.06.020 · Cited by 115
Kinetic study for the thermal decomposition of cellulose and pine sawdust in an air atmosphere
Bilbao, R., Mastral, J. F., Aldea, M. E., & Ceamanos, J. (1997) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(96)00957-6 · Cited by 110
Mixed-waste pyrolysis of biomass and plastics waste – A modelling approach to reduce energy usage
Oyedun, A. O., Gebreegziabher, T. G., Ng, D. K. S., & Hui, C. W. (2014) · Energy · doi:10.1016/j.energy.2014.05.063 · Cited by 109
Catalytic degradation of polymers: Part II—Degradation of polyethylene
Beltrame, P. L., Carniti, P., Audisio, G., & Bertini, F. (1989) · Polymer Degradation and Stability · doi:10.1016/0141-3910(89)90074-8 · Cited by 108
Uemichi, Y., Nakamura, J., Itoh, T., Sugioka, M., Garforth, A. A., & Dwyer, J. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980341+ · Cited by 107
Santella, C., Cafiero, L., Angelis, D. D., Marca, F. L., Tuffi, R., & Ciprioti, S. V. (2016) · Waste Management · doi:10.1016/j.wasman.2016.05.005 · Cited by 104
Jan, M. R., Shah, J., & Gulab, H. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2010.05.017 · Cited by 101
Pyrolysis of Polyvinyl Chloride (PVC)-Containing Mixed Plastic Wastes for Recovery of Hydrocarbons
Miskolczi, N., Bartha, L., & Angyal, A. (2009) · Energy & Fuels · doi:10.1021/ef8011245 · Cited by 101
Polymer degradation to fuels over microporous catalysts as a novel tertiary plastic recycling method
Gobin, K., & Manos, G. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00272-6 · Cited by 101
Self-citationFlash pyrolysis of polystyrene wastes in a free-fall reactor under vacuum
Karaduman, A., Şimşek, E. H., Çiçek, B., & Bilgesü, A. Y. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00169-8 · Cited by 100
Onwudili, J. A., & Williams, P. T. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.02.009 · Cited by 100
Pyrolysis of polyamide 6 under catalytic conditions and its application to reutilization of carpets
Bockhorn, H., Donner, S., Gernsbeck, M., Hornung, A., & Hornung, U. (2001) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(00)00187-x · Cited by 99
Study of the catalytic pyrolysis behaviour of polyethylene–polypropylene mixtures
Marcilla, A. F., Garcia-Quesada, J. C., Sánchez, S., & Ruiz‐Femenia, R. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2004.10.005 · Cited by 94
Polyethylene Cracking on a Spent FCC Catalyst in a Conical Spouted Bed
Elordi, G., Olazar, M., Castaño, P., Artetxe, M., & Bilbao, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3018274 · Cited by 94
A techno-economic comparison of fluidized bed gasification of two mixed plastic wastes
Arena, U., Gregorio, F. D., Amorese, C., & Mastellone, M. L. (2011) · Waste Management · doi:10.1016/j.wasman.2011.02.004 · Cited by 93
Hussain, Z., Khan, K. M., Perveen, S., Hussain, K., & Voelter, W. (2011) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.10.009 · Cited by 91
Defluidization phenomena during the pyrolysis of two plastic wastes
Arena, U., & Mastellone, M. L. (2000) · Chemical Engineering Science · doi:10.1016/s0009-2509(99)00533-3 · Cited by 91
Morrin, S., Lettieri, P., Chapman, C. D., & Mazzei, L. (2011) · Waste Management · doi:10.1016/j.wasman.2011.08.020 · Cited by 89
Fu, Z., Zhang, S., Li, X., Shao, J., Wang, K., & Chen, H. (2015) · Waste Management · doi:10.1016/j.wasman.2014.12.026 · Cited by 87
Dou, B., Wang, K., Jiang, B. Q., Song, Y., Zhang, C., Chen, H., & Xu, Y. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.12.197 · Cited by 87
Ultrapyrolytic cracking of polyethylene — a high yield recycling method
Sodero, S. F., Berruti, F., & Behie, L. A. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(96)00156-x · Cited by 86
Wong, H., & Broadbelt, L. J. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010171s · Cited by 85
Utilization of Two Different Types of Plastic Wastes from Daily and Industrial Life
Çepelioğullar, Ö., & Pütün, A. E. (2013) · Cited by 84
McCaffrey, W. C., Kamal, M. R., & Cooper, D. G. (1995) · Polymer Degradation and Stability · doi:10.1016/0141-3910(94)00096-q · Cited by 84
Glycolysis of flexible polyurethane wastes containing polymeric polyols
Simón, D., Borreguero, A. M., de Lucas, A., & Rodríguez, J. F. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.07.009 · Cited by 84
Co-pyrolysis of oil shale and plastics: Influence of pyrolysis parameters on the product yields
Aboulkas, A., Makayssi, T., Bilali, L., harfi, K. E., Nadifiyine, M., & Benchanâa, M. (2012) · Fuel Processing Technology · doi:10.1016/j.fuproc.2011.12.001 · Cited by 81
Production of hydrogen-rich gas from plant biomass by catalytic pyrolysis at low temperature
Qinglan, H., Wang, C., Lu, D., et al. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.06.039 · Cited by 80
Catalytic efficiency of some novel nanostructured heterogeneous solid catalysts in pyrolysis of HDPE
Ahmad, I. K., Khan, M. I., Ishaq, M., Khan, H., Gul, K., & Ahmad, W. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.09.009 · Cited by 80
GHG emission and carbon sequestration potential from MSW of Indian metro cities
Kumar, A., & Sharma, M. P. (2014) · Urban Climate · doi:10.1016/j.uclim.2014.03.002 · Cited by 78
Müller-Hagedorn, M., & Bockhorn, H. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.12.008 · Cited by 77
Thermal and catalytic decomposition of polyethylene and polypropylene
Onu, P., Vasile, C., Ciocı̂lteu, S., et al. (1999) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(98)00109-0 · Cited by 76
Overview of Commercial Pyrolysis Processes for Waste Plastics
Scheirs, J. (2006) · doi:10.1002/0470021543.ch15 · Cited by 71
Fluidised bed pyrolysis and catalytic pyrolysis of scrap tyres
Williams, P. T., & Brindle, A. J. (2003) · Environmental Technology · doi:10.1080/09593330309385629 · Cited by 69
Manos, G., Yusof, I. Y., Gangas, N. H., & Papayannakos, N. G. (2002) · Energy & Fuels · doi:10.1021/ef0102364 · Cited by 68
Self-citationDahiya, J. B., Kumar, K., Müller-Hagedorn, M., & Bockhorn, H. (2008) · Polymer International · doi:10.1002/pi.2398 · Cited by 68
Masuda, T., Kushino, T., Matsuda, T., Mukai, S. R., Hashimoto, K., & Yoshida, S. (2001) · Chemical Engineering Journal · doi:10.1016/s1385-8947(00)00347-8 · Cited by 65
Westerhout, R. W. J., Kuipers, J. A. M., & Swaaij, W. P. M. V. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970384a · Cited by 64
Mixtures of rubber tyre and plastic wastes pyrolysis: A kinetic study
Miranda, M., Cabrita, I., Pinto, F., & Gulyurtlu, I. (2013) · Energy · doi:10.1016/j.energy.2013.06.033 · Cited by 62
Nonaka, T., Noda, E., & Kurihara, S. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20000801)77:5<1118::aid-app20>3.0.co;2-j · Cited by 61
Combined model-free and model-based devolatilisation kinetics of tyre rubbers
Danon, B., Mkhize, N. M., van der Gryp, P., & Görgens, J. F. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.12.003 · Cited by 60
Modelling of the pyrolysis of high density polyethylene
Mastral, J. F., Berrueco, C., & Ceamanos, J. (2006) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.10.018 · Cited by 58
Feedstock recycling from plastic and thermoset fractions of used computers (I): pyrolysis
Vasile, C., Brebu, M. A., Karayildirim, T., Yanık, J., & Darie, H. (2006) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-006-0151-z · Cited by 57
Kinetic model of the pyrolysis of polyethylene in a fluidized bed reactor
Conesa, J. A., Marcilla, A. F., & Font, R. (1994) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(94)00806-x · Cited by 55
Theoretical prediction of product distribution of the pyrolysis of high density polyethylene
Mastral, J. F., Berrueco, C., & Ceamanos, J. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2006.07.009 · Cited by 53
Westerhout, R. W. J., Waanders, J., Kuipers, J. A. M., & Swaaij, W. P. M. V. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970703y · Cited by 52
Thermochemical Treatment of Plastic Solid Waste
Lettieri, P., & Al-Salem, S. M. (2011) · Waste · doi:10.1016/b978-0-12-381475-3.10017-8 · Cited by 51
Self-citationMcCaffrey, W. C., Cooper, D. G., & Kamal, M. R. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(98)00036-6 · Cited by 48
Temperature Distribution of the Plastics Pyrolysis Process to Produce Fuel at 450oC
Hartulistiyoso, E., Sigiro, F. A. P. A. G., & Yulianto, M. (2015) · Procedia Environmental Sciences · doi:10.1016/j.proenv.2015.07.030 · Cited by 44
Gulab, H., Jan, M. R., Shah, J., & Manos, G. (2010) · Journal of Environmental Science and Health Part A · doi:10.1080/10934521003709206 · Cited by 44
Self-citationKinetic analysis of thermal decomposition of polymer using a dynamic model
Park, J. W., Oh, S. C., Lee, H., et al. (2000) · Korean Journal of Chemical Engineering · doi:10.1007/bf02707154 · Cited by 43
Yoon, W. L., Park, J. S., Jung, H., Lee, H. T., & Lee, D. K. (1999) · Fuel · doi:10.1016/s0016-2361(98)00207-5 · Cited by 42
Agarwal, S., Karl, M., Dehnicke, K., Seybert, G., Massa, W., & Greiner, A. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19990829)73:9<1775::aid-app20>3.0.co;2-g · Cited by 39
The CRC handbook of mechanical engineering
(1998) · Choice Reviews Online · doi:10.5860/choice.36-0345 · Cited by 31
Activation of waste tire char by cyclic liquid-phase oxidation
Heras, F., Jimenez-Cordero, D., Gilarranz, M. A., Alonso-Morales, N., & Rodriguez, J. J. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.06.018 · Cited by 30
Particles versus fibrillar morphology in polyolefin ternary blends
Kim, B. K., & Do, I. H. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960620)60:12<2133::aid-app10>3.0.co;2-8 · Cited by 30
An assessment and prioritization of "design for recycling" guidelines for plastic components
Masanet, E. R., Auer, R., Tsuda, D., et al. (2003) · doi:10.1109/isee.2002.1003229 · Cited by 30
Thermogravimetric Evaluation for Pyrolysis Kinetics of Styrene-Butadiene Rubber
Oh, S. C., Jun, H. C., & Kim, H. T. (2003) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.36.1016 · Cited by 28
Matsunami, J., Yoshida, S., Yokota, O., Nezuka, M., Tsuji, M., & Tamaura, Y. (1999) · Solar Energy · doi:10.1016/s0038-092x(98)00085-1 · Cited by 28
Elucidation of the different devolatilisation zones of tyre rubber pyrolysis using TGA-MS
Danon, B., de Villiers, A. J., & Görgens, J. F. (2015) · Thermochimica Acta · doi:10.1016/j.tca.2015.05.012 · Cited by 25
Aminolysis of Poly(Ethylene Terephthalate) Waste for Recovery of Value Added Comonomeric Product
Goje, A. S., Thakur, S., Diware, V. R., Chauhan, Y. P., & Mishra, S. (2004) · Polymer-Plastics Technology and Engineering · doi:10.1081/ppt-120029971 · Cited by 25
Thermal Degradation of LDPE−Vacuum Gas Oil Mixtures for Plastic Wastes Valorization
Marcilla, A. F., García, A. N. J., & Hernández, M. D. R. (2007) · Energy & Fuels · doi:10.1021/ef0605293 · Cited by 24
The co-pyrolysis of flame retarded high impact polystyrene and polyolefins
Hall, W. J., Mitan, N. M. M., Bhaskar, T., Muto, A., Sakata, Y., & Williams, P. T. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.05.002 · Cited by 22
Mukherjee, M. K., & Thamotharan, C. (2014) · IOSR Journal of Mechanical and Civil Engineering · doi:10.9790/1684-11214751 · Cited by 17
The effect of short-chain branching on the thermolysis/reactive distillation of polyethylene
McCaffrey, W. C., Cooper, D. G., & Kamal, M. R. (1999) · Journal of Applied Polymer Science · Cited by 11
Cited by
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
“Pyrolysis is also considered to be a sustainable and efficient treatment that can produce a range of useful hydrocarbons, potentially used as a chemical feedstock or as energy, thereby minimizing the dependency on non-renewable fossil fuels, while solving the landfilling problem [17,18].”
BackgroundChemical and biological catalysis for plastics recycling and upcycling
Ellis, L. D., Rorrer, N. A., Sullivan, K. P., Otto, M., McGeehan, J. E., Román-Leshkov, Y., Wierckx, N., & Beckham, G. T. (2021) · Nature Catalysis · doi:10.1038/s41929-021-00648-4 · Cited by 1,201
Plastic Waste: Challenges and Opportunities to Mitigate Pollution and Effective Management
Kibria, M. G., Masuk, N. I., Safayet, R., Nguyen, H. Q., & Mourshed, M. (2023) · International Journal of Environmental Research · doi:10.1007/s41742-023-00507-z · Cited by 884
Dogu, O., Pelucchi, M., Van de Vijver, R., Van Steenberge, P. H. M., D'hooge, D. R., Cuoci, A., Mehl, M., Frassoldati, A., Faravelli, T., & Van Geem, K. M. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100901 · Cited by 698
Al-Rumaihi, A., Shahbaz, M., Mckay, G., Mackey, H., & Al-Ansari, T. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112715 · Cited by 650
Metadata
- Authors
- Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A.
- Venue
- Journal of Environmental Management
- Publisher
- Elsevier BV
- Published
- 2017-07
- Volume
- 197
- Pages
- 177-198
- ISSN
- 0301-4797 (ISSN-L)
- OpenAlex
- W2604230620
- Cited by
- 1,200
- References
- 178
- FWCI
- 30.61
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.