The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Effect of rheological properties of potato, rice and corn starches on their hot-extrusion 3D printing behaviors
Abstract
In this study, the relationship between rheological properties and printability of three types of starch (potato, rice and corn starch) for hot-extrusion 3D printing (HE-3DP) were systematically investigated. Each starch sample showed a shear-thinning behavior, self-supporting property, as well as the feature of a substantial decrease at higher strains and a recovery at lower strains in storage modulus (G′), which indicated the suitability of starch for HE-3DP. Besides, the flow stress (τf), yield stress (τy), and G′ increased with a higher starch concentration. We found that starch suspensions with concentrations of 15–25% (w/w) heated to 70–85 °C possessed preferable values of τf (140–722 Pa), τy (32–455 Pa), and G' (1150–6909 Pa) for HE-3DP, which endowed them with excellent extrusion processability and sufficient mechanical integrity to achieve high resolutions (0.804–1.024 mm line width). Overall, our results provided useful information to produce individualized starch-based food by HE-3DP.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Morphological, thermal and rheological properties of starches from different botanical sources
Singh, N., Singh, J., Kaur, L., Singh Sodhi, N., & Singh Gill, B. (2003) · Food Chemistry · doi:10.1016/s0308-8146(02)00416-8 · Cited by 1,929
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Impact of rheological properties of mashed potatoes on 3D printing
Liu, Z., Zhang, M., Bhandari, B., & Yang, C. (2018) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2017.04.017 · Cited by 550
An Overview of 3D Printing Technologies for Food Fabrication
Sun, J., Zhou, W., Huang, D., Fuh, J. Y. H., & Hong, G. S. (2015) · Food and Bioprocess Technology · doi:10.1007/s11947-015-1528-6 · Cited by 549
Relationships between thermal, rheological characteristics and swelling power for various starches
Li, J.-Y., & Yeh, A.-I. (2001) · Journal of Food Engineering · doi:10.1016/s0260-8774(00)00236-3 · Cited by 480
Yang, F., Zhang, M., Bhandari, B., & Liu, Y. (2018) · LWT · doi:10.1016/j.lwt.2017.08.054 · Cited by 479
Associative polymers in aqueous solution
Winnik, M. A., & Yekta, A. (1997) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(97)80088-x · Cited by 462
Cited by
Applications of 3D Printing in Food Processing
Nachal, N., Moses, J. A., Karthik, P., & Anandharamakrishnan, C. (2019) · Food Engineering Reviews · doi:10.1007/s12393-019-09199-8 · Cited by 359
Mohanty, A. K., Wu, F., Mincheva, R., Hakkarainen, M., Raquez, J.-M., Mielewski, D. F., Narayan, R., Netravali, A. N., & Misra, M. (2022) · Nature Reviews Methods Primers · doi:10.1038/s43586-022-00124-8 · Cited by 355
Extrusion-based additive manufacturing technologies: State of the art and future perspectives
Altıparmak, S. C., Yardley, V. A., Shi, Z., & Lin, J. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.09.032 · Cited by 320
Dalbhagat, C. G., Mahato, D. K., & Mishra, H. N. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.01.001 · Cited by 283
Recent advances and future perspective in additive manufacturing of foods based on 3D printing
Le-Bail, A., Maniglia, B. C., & Le-Bail, P. (2020) · Current Opinion in Food Science · doi:10.1016/j.cofs.2020.01.009 · Cited by 229
Metadata
- Authors
- Chen, H., Xie, F., Chen, L., & Zheng, B.
- Venue
- Journal of Food Engineering
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 244
- Pages
- 150-158
- ISSN
- 0260-8774 (ISSN-L)
- OpenAlex
- W2890285928
- Cited by
- 301
- References
- 33
- FWCI
- 8.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of rheological properties of potato, rice and corn starches on their hot-extrusion 3D printing behaviors. https://app.cochat.ai/papers/10.1016/j.jfoodeng.2018.09.011
- The paper
- Chen, H., Xie, F., Chen, L., & Zheng, B. (2019). Effect of rheological properties of potato, rice and corn starches on their hot-extrusion 3D printing behaviors. Journal of Food Engineering. https://doi.org/10.1016/j.jfoodeng.2018.09.011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.