CoChat

Quantitative analysis of nanoplastics in environmental and potable waters by pyrolysis-gas chromatography–mass spectrometry

Open access
Okoffo, Elvis D., Thomas, Kevin V. · 2024 · Journal of Hazardous Materials
Cited by 211

The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.

Abstract

Nanoplastics are emerging environmental contaminants, but their presence in environmental and potable water remains largely understudied due to the absence of quantitative analytical methods. In this study, we developed and validated a pretreatment method that combines hydrogen peroxide digestion and Amicon® Stirred Cell ultrafiltration (at 100 kDa, approximately 10 nm) with subsequent detection by pyrolysis gas chromatography–mass spectrometry (Pyr-GC/MS). This method allows for the simultaneous identification and quantification of nine selected nanoplastic types, including poly(ethylene terephthalate) (PET), polyethylene (PE), polycarbonate (PC), polypropylene (PP), poly(methyl methacrylate) (PMMA), polystyrene (PS), polyvinylchloride (PVC), nylon 6, and nylon 66, in environmental and potable water samples based on polymer-specific mass concentration. Limits of quantification ranged from 0.01 to 0.44 µg/L, demonstrating the method’s ability to quantitatively detect nanoplastics in environmental and potable water samples. Most of the selected nanoplastics were detected at concentrations of between 0.04 and 1.17 µg/L, except for PC, which was consistently below the limit of detection (<0.44 µg/L). The prevalent polymer components in the samples were PE (0.10 – 1.17 µg/L), PET (0.06 – 0.91 µg/L), PP (0.04 – 0.79 µg/L), and PS (0.06 – 0.53 µg/L) nanoplastics. The presented analytical method offers an accurate means to identify, quantify, and monitor nanoplastics in complex environmental and potable water samples. It fills gaps in our understanding of nanoplastic pollution levels, providing a valuable methodology and crucial reference data for future studies. The environmental fate and potential human exposure risks associated with nanoplastics have garnered significant attention, but the occurrence and concentrations of nanoplastics in environmental and potable water samples remain largely understudied due to analytical complexities. In this study, we developed an analytical workflow capable of pre-concentrating, identifying, and quantifying levels of nanoplastics present in complex environmental and potable waters. Among the nine targeted nanoplastics (PE, PP, PET, PS, PMMA, PC, Nylon 6, PVC, and Nylon 66), eight were successfully identified and quantified, with PE, PET, PP, and PS being the most prevalent. This research provided valuable insights into the actual pollution levels of these targeted nanoplastics in environmental and potable water samples, offering crucial reference data for future studies, and demonstrating the effectiveness of the proposed analytical method.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.jhazmat.2023.133013

Cites

11 of 11 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 11 references

Cited by

See all 211

Metadata

Authors
Okoffo, E. D., & Thomas, K. V.
Venue
Journal of Hazardous Materials
Publisher
Elsevier BV
Published
2024-02
Volume
464
Pages
133013
ISSN
0304-3894 (ISSN-L)
OpenAlex
W4388736127
Cited by
211
References
11
FWCI
12.42
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Quantitative analysis of nanoplastics in environmental and potable waters by pyrolysis-gas chromatography–mass spectrometry. https://app.cochat.ai/papers/10.1016/j.jhazmat.2023.133013
The paper
Okoffo, E. D., & Thomas, K. V. (2024). Quantitative analysis of nanoplastics in environmental and potable waters by pyrolysis-gas chromatography–mass spectrometry. Journal of Hazardous Materials. https://doi.org/10.1016/j.jhazmat.2023.133013

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.