The DOI matches its Crossref record; 60 of the 60 references it cites were found in a registry or an index.
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
Abstract
Abstract Due to the feasibility of economically producing large-scale metal components with relatively high deposition rates, significant progress has been made in the understanding of the Wire Arc Additive Manufacturing (WAAM) process, as well as the microstructure and mechanical properties of the fabricated components. As WAAM has evolved, a wide range of materials have become associated with the process and its applications. This article reviews the emerging research on WAAM techniques and the commonly used metallic feedstock materials, and also provides a comprehensive over view of the metallurgical and material properties of the deposited parts. Common defects produced in WAAM components using different alloys are described, including deformation, porosity, and cracking. Methods for improving the fabrication quality of the additively manufactured components are discussed, taking into account the requirements of the various alloys. This paper concludes that the wide application of WAAM still presents many challenges, and these may need to be addressed in specific ways for different materials in order to achieve an operational system in an acceptable time frame. The integration of materials and manufacturing process to produce defect-free and structurally-sound deposited parts remains a crucial effort into the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IOP Conference Series: Materials Science and Engineering
(2022) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/1231/1/011001 · Cited by 10,357
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Titanium and Titanium Alloys: Fundamentals and Applications
(2003) · Wiley eBooks · doi:10.1002/3527602119 · Cited by 3,108
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Wire + Arc Additive Manufacturing
Williams, S., Martina, F., Addison, A. C., Ding, J., Pardal, G., & Colegrove, P. A. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000073 · Cited by 1,971
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Self-citationLevy, G. N., Schindel, R., & Kruth, J. P. (2003) · CIRP Annals · doi:10.1016/s0007-8506(07)60206-6 · Cited by 1,121
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
An improved prediction of residual stresses and distortion in additive manufacturing
Mukherjee, T., Zhang, W., & DebRoy, T. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2016.10.003 · Cited by 812
Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Wang, F., Williams, S., Colegrove, P., & Antonysamy, A. A. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1444-6 · Cited by 737
A review of very-high-temperature Nb-silicide-based composites
Bewlay, B. P., Jackson, M. R., Subramanian, P. R., & Zhao, J. C. (2003) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-003-0269-8 · Cited by 728
Crystallization and high-temperature structural stability of titanium oxide nanotube arrays
Varghese, O. K., Gong, D., Paulose, M., Grimes, C. A., & Dickey, E. C. (2003) · Journal of Materials Research · doi:10.1557/jmr.2003.0022 · Cited by 691
Ding, J., Colegrove, P., Mehnen, J., Ganguly, S., Sequeira Almeida, P. M., Wang, F., & Williams, S. (2011) · Computational Materials Science · doi:10.1016/j.commatsci.2011.06.023 · Cited by 689
Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti–6Al–4V
Martina, F., Mehnen, J., Williams, S., Colegrove, P. A., & Wang, F. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.02.002 · Cited by 641
Baufeld, B., der Biest, O. V., & Gault, R. (2009) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.11.032 · Cited by 601
Emerging applications of intermetallics
Stoloff, N. S., Liu, C. T., & Deevi, S. C. (2000) · Intermetallics · doi:10.1016/s0966-9795(00)00077-7 · Cited by 586
Cong, B., Ding, J., & Williams, S. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6346-x · Cited by 581
A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)
Ding, D., Pan, Z. S., Cuiuri, D., & Li, H. (2014) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2014.08.008 · Cited by 577
Self-citationColegrove, P. A., Coules, H., Fairman, J., Martina, F., Kashoob, T., Mamash, H., & Cozzolino, L. D. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.04.012 · Cited by 567
Baufeld, B., Brandl, E., & der Biest, O. V. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.01.018 · Cited by 537
Denlinger, E. R., Heigel, J. C., Michaleris, P., & Palmer, T. A. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.07.030 · Cited by 531
Metal Matrix Composites: Custom‐made Materials for Automotive and Aerospace Engineering
(2006) · Wiley eBooks · doi:10.1002/3527608117 · Cited by 529
Murr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., Medina, F., Collins, S., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.11.032 · Cited by 526
Uriondo, A., Esperon-Miguez, M., & Perinpanayagam, S. (2015) · Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · doi:10.1177/0954410014568797 · Cited by 489
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
Edwards, P., O'Conner, A., & Ramulu, M. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025773 · Cited by 450
Gu, J., Ding, J., Williams, S. W., Gu, H., Ma, P., & Zhai, Y. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.11.006 · Cited by 431
Gu, J., Ding, J., Williams, S. W., Gu, H., Bai, J., Zhai, Y., & Ma, P. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.101 · Cited by 413
Analysis of Welded Structures: Residual Stresses, Distortion, and their Consequences
Masubuchi, K. (1980) · Pergamon Press eBooks · Cited by 405
Szost, B. A., Terzi, S., Martina, F., Boisselier, D., Prytuliak, A., Pirling, T., Hofmann, M., & Jarvis, D. J. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.09.115 · Cited by 393
Donoghue, J. M., Antonysamy, A. A., Martina, F., Colegrove, P. A., Williams, S., & Prangnell, P. B. (2016) · Materials Characterization · doi:10.1016/j.matchar.2016.02.001 · Cited by 369
Wu, B., Ding, D., Pan, Z. S., et al. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.07.037 · Cited by 352
Self-citationBrandl, E., Baufeld, B., Leyens, C., & Gault, R. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.087 · Cited by 348
Ding, D., Pan, Z. S., Cuiuri, D., et al. (2015) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.01.003 · Cited by 336
Self-citationMicrostructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components
Martina, F., Colegrove, P. A., Williams, S., & Meyer, J. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3172-1 · Cited by 328
Brandl, E., Schoberth, A., & Leyens, C. (2012) · Materials Science and Engineering: A · doi:10.1016/j.msea.2011.10.095 · Cited by 327
Wang, J. F., Sun, Q. J., Wang, H., Liu, J. P., & Feng, J. C. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.09.015 · Cited by 282
Wang, F., Williams, S., & Rush, M. T. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3299-1 · Cited by 280
Shaped metal deposition of a nickel alloy for aero engine applications
Clark, D., Bache, M. R., & Whittaker, M. T. (2007) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2007.10.051 · Cited by 245
Guo, J., Zhou, Y., Liu, C., Wu, Q., Chen, X., & Lu, J. (2016) · Materials · doi:10.3390/ma9100823 · Cited by 241
Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing
Ding, D., Pan, Z. S., van Duin, S., Li, H., & Shen, C. (2016) · Materials · doi:10.3390/ma9080652 · Cited by 238
Self-citationCorrosion resistance of ternary NiP based alloys in sulfuric acid solutions
Lu, G., & Zangari, G. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00198-6 · Cited by 227
Analysis of Welded Structures: Residual Stresses, Distortion, and their Consequences
Masubuchi, K. (1980) · Cited by 219
Ding, D., Shen, C., Pan, Z. S., Cuiuri, D., Li, H., Larkin, N., & van Duin, S. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2015.12.003 · Cited by 212
Self-citationAdaptive path planning for wire-feed additive manufacturing using medial axis transformation
Ding, D., Pan, Z. S., Cuiuri, D., Li, H., & Larkin, N. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.036 · Cited by 174
Self-citationXiong, J., Yin, Z., & Zhang, W. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.02.021 · Cited by 170
Mechanical Properties of INCONEL 718 Parts Manufactured by Shaped Metal Deposition (SMD)
Baufeld, B. (2012) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-011-0009-y · Cited by 163
Xiong, J., Zhang, G., Qiu, Z., & Li, Y. (2012) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.10.009 · Cited by 153
Lin, J., Lv, Y., Liu, Y., Sun, Z., Wang, K., Li, Z., Wu, Y., & Xu, B. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.12.015 · Cited by 149
Yang, D., He, C., & Zhang, G. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.08.021 · Cited by 141
Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
Brice, C., Shenoy, R. N., Kral, M. V., & Buchannan, K. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.08.088 · Cited by 138
Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments
Brandl, E., & Greitemeier, D. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.04.116 · Cited by 121
Effect of Process Control and Powder Quality on Inconel 718 Produced Using Electron Beam Melting
Sames, W. J., Medina, F. R., Peter, W. H., Babu, S. S., & Dehoff, R. (2014) · Wiley eBooks · doi:10.1002/9781119016854.ch32 · Cited by 109
Liu, L., Zhuang, Z., Liu, F., & Zhu, M. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5191-7 · Cited by 94
Process control and development in wire and arc additive manufacturing
Almeida, S. (2012) · Cited by 51
Introduction to engineering materials
Agrawal, B. K. (1988) · Tata McGraw-Hill eBooks · Cited by 33
Cited by
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Directed Energy Deposition (DED) Process: State of the Art
Ahn, D.-G. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00302-7 · Cited by 803
Current Status and Perspectives on Wire and Arc Additive Manufacturing (WAAM)
Rodrigues, T. A., Duarte, V., Miranda, R. M., Santos, T. G., & Oliveira, J. P. (2019) · Materials · doi:10.3390/ma12071121 · Cited by 779
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K. (2021) · Applied Sciences · doi:10.3390/app11031213 · Cited by 748
Metadata
- Authors
- Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 35
- Pages
- 127-139
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W2887955127
- Cited by
- 1,577
- References
- 60
- FWCI
- 52.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.