The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Mechanical evaluation of bacterial nanocellulose as an implant material for ear cartilage replacement
Open accessAbstract
Bacterial nanocellulose (BNC) is a novel non-degradable biocompatible material that promotes chondrocyte adhesion and proliferation. In this work, its potential use in ear cartilage tissue engineering (TE) is investigated. Firstly, the mechanical properties of native ear cartilage are measured in order to set a preliminary benchmark for ear cartilage replacement materials. Secondly, the capacity of BNC to match these requirements is assessed. Finally, a biofabrication process to produce patient-specific BNC auricular implants is demonstrated. BNC samples (n=78) with varying cellulose content (2.5-15%) were compared using stress-relaxation indentation with human ear cartilage (n=17, from 4 males, aged 49-93 years old). Additionally, an auricle from a volunteer was scanned using a 3T MRI with a spoiled gradient-echo sequence. A negative ear mold was produced from the MRI data in order to investigate if an ear-shaped BNC prototype could be produced from this mold. The results show that the instantaneous modulus Ein, equilibrium modulus Eeq, and maximum stress σmax of the BNC samples are correlated to effective cellulose content. Despite significantly different relaxation kinetics, the Ein, Eeq and σmax of BNC at 14% effective cellulose content reached values equivalent to ear cartilage (for Eeq, BNC: 2.4±0.4MPa and ear cartilage: 3.3±1.3MPa). Additionally, this work shows that BNC can be fabricated into patient-specific auricular shapes. In conclusion, BNC has the capability to reach mechanical properties of relevance for ear cartilage replacement, and can be produced in patient-specific ear shapes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose: Fascinating Biopolymer and Sustainable Raw Material
Klemm, D., Heublein, B., Fink, H., & Bohn, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200460587 · Cited by 7,551
Bacterial synthesized cellulose — artificial blood vessels for microsurgery
Klemm, D., Schumann, D., Udhardt, U., & Marsch, S. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00021-1 · Cited by 1,334
Cellulose biosynthesis and function in bacteria
Ross, P., Mayer, R., & Benziman, M. (1991) · Microbiological Reviews · doi:10.1128/mmbr.55.1.35-58.1991 · Cited by 1,231
Cited by
Nanocellulose in biomedicine: Current status and future prospect
Lin, N., & Dufresne, A. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.07.025 · Cited by 1,658
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Self-citationNanocellulose, a tiny fiber with huge applications
Abitbol, T., Rivkin, A., Cao, Y., Nevo, Y., Abraham, E., Ben-Shalom, T., Lapidot, S., & Shoseyov, O. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.01.002 · Cited by 1,006
Wang, J., Tavakoli, J., & Tang, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.008 · Cited by 776
Recent advances in nanocellulose for biomedical applications
Jorfi, M., & Foster, E. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41719 · Cited by 738
Bacterial nanocellulose production and application: a 10-year overview
Jozala, A. F., de Lencastre-Novaes, L. C., Lopes, A. M., de Carvalho Santos-Ebinuma, V., Mazzola, P. G., Pessoa-Jr, A., Grotto, D., Gerenutti, M., & Chaud, M. V. (2016) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-015-7243-4 · Cited by 481
3D printing of bacteria into functional complex materials
Schaffner, M., Rühs, P. A., Coulter, F., Kilcher, S., & Studart, A. R. (2017) · Science Advances · doi:10.1126/sciadv.aao6804 · Cited by 425
Applications of bacterial cellulose in food, cosmetics and drug delivery
Ullah, H., Santos, H. A., & Khan, T. (2016) · Cellulose · doi:10.1007/s10570-016-0986-y · Cited by 421
Versatile Application of Nanocellulose: From Industry to Skin Tissue Engineering and Wound Healing
Bacakova, L., Pajorova, J., Bacakova, M., Skogberg, A., Kallio, P., Kolarova, K., & Svorcik, V. (2019) · Nanomaterials · doi:10.3390/nano9020164 · Cited by 405
Preparation, properties and applications of nanocellulosic materials
Mondal, S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.050 · Cited by 387
Applications of bacterial cellulose and its composites in biomedicine
Rajwade, J. M., Paknikar, K. M., & Kumbhar, J. V. (2015) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-015-6426-3 · Cited by 369
A multipurpose natural and renewable polymer in medical applications: Bacterial cellulose
de Oliveira Barud, H. G., da Silva, R. R., da Silva Barud, H., Tercjak, A., Gutierrez, J., Lustri, W. R., de Oliveira, O. B., & Ribeiro, S. J. L. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.07.059 · Cited by 340
Ullah, H., Wahid, F., Santos, H. A., & Khan, T. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.05.029 · Cited by 330
Martínez Ávila, H., Schwarz, S., Rotter, N., & Gatenholm, P. (2016) · Bioprinting · doi:10.1016/j.bprint.2016.08.003 · Cited by 282
Self-citationIn situ and ex situ modifications of bacterial cellulose for applications in tissue engineering
Stumpf, T. R., Yang, X., Zhang, J., & Cao, X. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.11.121 · Cited by 274
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., & Arshad, H. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.128 · Cited by 260
Biocompatibility of Subcutaneously Implanted Plant-Derived Cellulose Biomaterials
Modulevsky, D. J., Cuerrier, C. M., & Pelling, A. E. (2016) · PLOS ONE · doi:10.1371/journal.pone.0157894 · Cited by 254
Urbina, L., Corcuera, M. Á., Gabilondo, N., Eceiza, A., & Retegi, A. (2021) · Cellulose · doi:10.1007/s10570-021-04020-4 · Cited by 201
“It has been reported that the gelatinous membrane of BC became edible after processing it with sugar alcohol or with alginate and calcium chloride, and that it presented the consistency of fruit or molluscs (Okiyama et al. 1992).”
BackgroundKadier, A., Ilyas, R. A., Huzaifah, M. R. M., Harihastuti, N., Sapuan, S. M., Harussani, M. M., Azlin, M. N. M., Yuliasni, R., Ibrahim, R., Atikah, M. S. N., et al. (2021) · Polymers · doi:10.3390/polym13193365 · Cited by 140
Metadata
- Authors
- Nimeskern, L., Martínez Ávila, H., Sundberg, J., Gatenholm, P., Müller, R., & Stok, K. S.
- Venue
- Journal of the Mechanical Behavior of Biomedical Materials
- Publisher
- Elsevier BV
- Published
- 2013-06
- Volume
- 22
- Pages
- 12-21
- ISSN
- 1751-6161 (ISSN-L)
- OpenAlex
- W2047876202
- Cited by
- 219
- References
- 3
- FWCI
- 6.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.