The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
A TG-FTIR investigation on the co-pyrolysis of the waste HDPE, PP, PS and PET under high heating conditions
Abstract
The present study relates to the investigation of degradation of polymers such as HDPE, PP, PS and PET individually and in mixed forms. Eleven different mixture combinations were analyzed via TG Analysis to determine their degradation behavior individually and in mixed forms. FTIR analysis of the raw polymers was performed to investigate the presence of different functional groups in the sample. Online TG-FTIR analysis was performed to investigate the functional groups present in the volatiles fractions during single component pyrolysis and the interaction of polymers during co-pyrolysis was analyzed, compared and reported. Also, a real-world post consumer mixed waste was also analyzed and compared. During the co-pyrolysis of HDPE with PP and PS, the degradation of PP was delayed whereas PS reduced the degradation temperature of HDPE. In the case of degradation of PS with PP and PET, the increase in degradation temperature was reported whereas, in the case of PET and HDPE mixture, the degradation temperature of HDPE was reduced. During the interaction of PP and PET mixed degradation, PET degradation temperature was delayed. During the FTIR analysis a large amount of alkanes, alkenes, aromatics groups were observed during the degradation of HDPE, PP and PS whereas in case of PET the presence of oxygenated groups is observed. During the mixed degradation, the presence of PET in the sample caused the formation of oxygenated groups by reducing the absorption intensity of other groups or by disappearing the groups. Compounds such as benzoic acid, CO and CO2 was detected during the degradation of PET whereas in other polymers a large amount of methane or methylene group is observed. Overall during the degradation of mixed polymer mixture presence of PET played a vital role in the formation of light gas fractions. Even though a numerous investigation on co-pyrolysis of polymers were available, there is still not sufficient information of interaction of polymers with each other, especially with PET. This article attempts to fill this gap.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Encyclopedia of polymer science and technology
(2003) · Choice Reviews Online · doi:10.5860/choice.41-0674 · Cited by 5,095
Interpretation of Infrared Spectra, A Practical Approach
Coates, J. (2000) · Encyclopedia of Analytical Chemistry · doi:10.1002/9780470027318.a5606 · Cited by 4,411
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Recycling of plastic solid waste: A state of art review and future applications
Singh, N., Hui, D., Singh, R., Ahuja, I. P. S., Feo, L., & Fraternali, F. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.013 · Cited by 1,211
Self-citationLopez, G., Artetxe, M., Amutio, M., Bilbao, J., & Olazar, M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.142 · Cited by 897
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Kunwar, B., Cheng, H. N., Chandrashekaran, S. R., & Sharma, B. K. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.015 · Cited by 639
A review on tertiary recycling of high-density polyethylene to fuel
Kumar, S., Panda, A. K., & Singh, R. K. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.005 · Cited by 493
Self-citationPyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W. (2015) · International Journal of Green Energy · doi:10.1080/15435075.2014.880146 · Cited by 463
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 399
Xu, F., Wang, B., Yang, D., Hao, J., Qiao, Y., & Tian, Y. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.047 · Cited by 372
Pyrolysis characteristics and kinetics of low rank coals by TG-FTIR method
Song, H., Liu, G., Zhang, J., & Wu, J. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2016.10.008 · Cited by 371
Pyrolysis of waste materials using TGA-MS and TGA-FTIR as complementary characterisation techniques
Singh, S., Wu, C., & Williams, P. T. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.11.011 · Cited by 313
The Degradation of Poly(ethylene terephthalate)
Buxbaum, L. H. (1968) · Angewandte Chemie International Edition in English · doi:10.1002/anie.196801821 · Cited by 313
Fast pyrolysis of plastic wastes
Scott, D. S., Czernik, S. R., Piskorz, J., & Radlein, D. S. A. G. (1990) · Energy & Fuels · doi:10.1021/ef00022a013 · Cited by 301
Processing and Characterization of PET Composites Reinforced With Geopolymer Concrete Waste
Pereira, A. P. D. S., Silva, M. H. P. D., Lima Júnior, É. P., Paula, A. D. S., & Tommasini, F. J. (2017) · Materials Research · doi:10.1590/1980-5373-mr-2017-0734 · Cited by 301
Singh, R. K., & Ruj, B. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.049 · Cited by 279
Self-citationTG/FTIR analysis on co-pyrolysis behavior of PE, PVC and PS
Wu, J., Chen, T., Luo, X., Han, D., Wang, Z., & Wu, J. (2014) · Waste Management · doi:10.1016/j.wasman.2013.12.005 · Cited by 277
Effect of catalyst contact mode and gas atmosphere during catalytic pyrolysis of waste plastics
Xue, Y., Johnston, P., & Bai, X. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.03.071 · Cited by 262
Chen, W., Shi, S., Zhang, J., Chen, M., & Zhou, X. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.005 · Cited by 241
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.03.067 · Cited by 232
Self-citationSingh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2019.01.009 · Cited by 230
Self-citationStudy on the co-pyrolysis of rice straw and high density polyethylene blends using TG-FTIR-MS
Kai, X., Li, R., Yang, T., Shen, S., Ji, Q., & Zhang, T. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.05.026 · Cited by 209
Evaluation of the co-pyrolysis of lignin with plastic polymers by TG-FTIR and Py-GC/MS
Jin, W., Shen, D., Liu, Q., & Xiao, R. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.08.001 · Cited by 199
Effect of pressure on thermal degradation of polyethylene
Murata, K., Sato, K., & Sakata, Y. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.08.010 · Cited by 195
Pyrolysis of mixed plastics for the recovery of useful products
Siddiqui, M. N., & Redhwi, H. H. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.01.003 · Cited by 190
Honus, S., Kumagai, S., Fedorko, G., Molnár, V., & Yoshioka, T. (2018) · Fuel · doi:10.1016/j.fuel.2018.02.074 · Cited by 187
On the thermal treatment of plastic mixtures of MSW: Pyrolysis kinetics
Wu, C.-H., Chang, C.-Y., Hor, J.-L., Shih, S.-M., Chen, L.-W., & Chang, F.-W. (1993) · Waste Management · doi:10.1016/0956-053x(93)90046-y · Cited by 166
Basic study on a continuous flow reactor for thermal degradation of polymers
Murata, K., Hirano, Y., Sakata, Y., & Uddin, M. A. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00181-4 · Cited by 160
Muhammad, C., Onwudili, J. A., & Williams, P. T. (2015) · Energy & Fuels · doi:10.1021/ef502749h · Cited by 156
Environmental engineering: Stepwise pyrolysis of plastic waste
Bockhorn, H., Hentschel, J., Hornung, A., & Hornung, U. (1999) · Chemical Engineering Science · doi:10.1016/s0009-2509(98)00385-6 · Cited by 156
Recent developments in the thermal degradation of polystyrene—A review
Guyot, A. (1986) · Polymer Degradation and Stability · doi:10.1016/0141-3910(86)90052-2 · Cited by 141
A review of municipal solid waste composition and quantities in Poland
den Boer, E., Jędrczak, A., Kowalski, Z., Kulczycka, J., & Szpadt, R. (2009) · Waste Management · doi:10.1016/j.wasman.2009.09.018 · Cited by 137
TG–FTIR characterization of pyrolysis of waste mixtures of paint and tar slag
Tao, L., Zhao, G., Qian, J., & Qin, Y. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.10.073 · Cited by 101
Singh, M. V., Kumar, S., & Sarker, M. (2018) · Sustainable Energy & Fuels · doi:10.1039/c8se00040a · Cited by 94
Wong, H., & Broadbelt, L. J. (2001) · Industrial & Engineering Chemistry Research · doi:10.1021/ie010171s · Cited by 85
Interactions of municipal solid waste components during pyrolysis: A TG-FTIR study
Zhou, H., Meng, A., Long, Y., Li, Q., & Zhang, Y. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.024 · Cited by 78
Liu, G., Liao, Y., & Ma, X. (2017) · Waste Management · doi:10.1016/j.wasman.2017.01.034 · Cited by 78
Study of the Pyrolysis Kinetics of a Mixture of Polyethylene, Polypropylene, and Polystyrene
Costa, P., Pinto, F., Ramos, A. M., et al. (2010) · Energy & Fuels · doi:10.1021/ef101010n · Cited by 74
Grause, G., Handa, T., Kameda, T., Mizoguchi, T., & Yoshioka, T. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.11.010 · Cited by 69
Tang, Y., Ma, X., Wang, Z., Wu, Z., & Yu, Q. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.09.009 · Cited by 66
Honus, S., Kumagai, S., Němček, O., & Yoshioka, T. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.08.055 · Cited by 62
Plasticwaste management and disposal techniques - Indian scenario
Singh, R. K., & Ruj, B. (2015) · International Journal of Plastics Technology · doi:10.1007/s12588-015-9120-5 · Cited by 61
Self-citationWesterhout, R. W. J., Waanders, J., Kuipers, J. A. M., & Swaaij, W. P. M. V. (1998) · Industrial & Engineering Chemistry Research · doi:10.1021/ie970703y · Cited by 52
Cafiero, L., Castoldi, E., Tuffi, R., & Ciprioti, S. V. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.08.001 · Cited by 44
Temperature‐dependent pyrolytic product evolution profile for polypropylene
Hujuri, U., Ghoshal, A. K., & Gumma, S. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32904 · Cited by 30
Cited by
Wang, Z., Burra, K. G., Lei, T., & Gupta, A. K. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100899 · Cited by 634
Plastic Waste Recycling, Applications, and Future Prospects for a Sustainable Environment
Maitlo, G., Ali, I., Maitlo, H. A., Ali, S., Unar, I. N., Ahmad, M. B., Bhutto, D. K., Karmani, R. K., Naich, S. U. R., Sajjad, R. U., et al. (2022) · Sustainability · doi:10.3390/su141811637 · Cited by 143
Zhou, X., Zhu, L., Dong, W., & Jiang, M. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.140546 · Cited by 41
Household mixed plastic waste derived adsorbents for CO2 capture: A feasibility study
Dan, E., McCue, A. J., Dionisi, D., & Fernández Martín, C. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.120466 · Cited by 33
Metadata
- Authors
- Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P.
- Venue
- Journal of the Energy Institute
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 93
- Issue
- 3
- Pages
- 1020-1035
- ISSN
- 0144-2600 (ISSN-L)
- 1743-9671
- OpenAlex
- W2981066927
- Cited by
- 262
- References
- 46
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.