The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries
Open accessAbstract
Summary Cathode materials control both the energy density and cost of Li-ion and Li-metal batteries. The cobalt-free LiNiO2 with relatively low cost and extremely high theoretical energy density (∼1,050 Wh kg−1) is one of the most promising cathode materials for high-energy batteries. However, the continuous Ni dissolution, structural disordering, particle cracking, and unstable cathode electrolyte interphase (CEI) hinder its applications. Here, we surmount these challenges by forming a robust fluoride (F)- and boron (B)-rich CEI on LiNiO2 using a high-fluorinated electrolyte with LiDFOB additive. The LiNiO2 cathode maintains an unprecedentedly high capacity retention of >80% after 400 deep cycles at a high charge cut-off voltage of 4.4 V (versus Li/Li+). In addition, the electrolyte forms an F- and B-rich interphase on the Li metal and graphite anodes, allowing stable cycling of full cells. This work sheds light on designing interfacial chemistry for high-energy cathodes, and its principle is applicable for other alkali metal ion cathodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Promise and reality of post-lithium-ion batteries with high energy densities
Choi, J. W., & Aurbach, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.13 · Cited by 5,110
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Accurate Determination of Coulombic Efficiency for Lithium Metal Anodes and Lithium Metal Batteries
Adams, B. D., Zheng, J., Ren, X., Xu, W., & Zhang, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702097 · Cited by 1,499
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Self-citationNickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
Jiao, S., Ren, X., Cao, R., Engelhard, M. H., Liu, Y., Hu, D., Mei, D., Zheng, J., Zhao, W., Li, Q., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0199-8 · Cited by 1,149
Nanostructured high-energy cathode materials for advanced lithium batteries
Sun, Y.-K., Chen, Z., Noh, H.-J., Lee, D.-J., Jung, H.-G., Ren, Y., Wang, S., Yoon, C. S., Myung, S.-T., & Amine, K. (2012) · Nature Materials · doi:10.1038/nmat3435 · Cited by 1,093
Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries
Fan, X., Chen, L., Ji, X., Deng, T., Hou, S., Chen, J., Zheng, J., Wang, F., Jiang, J., Xu, K., et al. (2018) · Chem · doi:10.1016/j.chempr.2017.10.017 · Cited by 961
Self-citationProspect and Reality of Ni‐Rich Cathode for Commercialization
Kim, J., Lee, H., Cha, H., Yoon, M., Park, M., & Cho, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201702028 · Cited by 933
Identification of cathode materials for lithium batteries guided by first-principles calculations
Ceder, G., Chiang, Y.-M., Sadoway, D. R., Aydinol, M. K., Jang, Y.-I., & Huang, B. (1998) · Nature · doi:10.1038/33647 · Cited by 841
Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery
Fan, X., Ji, X., Han, F., Yue, J., Chen, J., Chen, L., Deng, T., Jiang, J., & Wang, C. (2018) · Science Advances · doi:10.1126/sciadv.aau9245 · Cited by 838
Self-citationYan, P., Zheng, J., Liu, J., Wang, B., Cheng, X., Zhang, Y., Sun, X., Wang, C., & Zhang, J.-G. (2018) · Nature Energy · doi:10.1038/s41560-018-0191-3 · Cited by 826
Self-citationComparative study of LiCoO2, LiNi Co O2 and LiNiO2 for 4 volt secondary lithium cells
Ohzuku, T., Ueda, A., Nagayama, M., Iwakoshi, Y., & Komori, H. (1993) · Electrochimica Acta · doi:10.1016/0013-4686(93)80046-3 · Cited by 799
In situ x-ray diffraction and electrochemical studies of Li1−xNiO2
LI, W., Reimers, J. N., & Dahn, J. R. (1993) · Solid State Ionics · doi:10.1016/0167-2738(93)90317-v · Cited by 745
Kondrakov, A. O., Schmidt, A., Xu, J., Geßwein, H., Mönig, R., Hartmann, P., Sommer, H., Brezesinski, T., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b12885 · Cited by 701
There and Back Again—The Journey of LiNiO2 as a Cathode Active Material
Bianchini, M., Roca‐Ayats, M., Hartmann, P., Brezesinski, T., & Janek, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201812472 · Cited by 670
Zhang, Q., Pan, J., Lu, P., Liu, Z., Verbrugge, M. W., Sheldon, B. W., Cheng, Y.-T., Qi, Y., & Xiao, X. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b05283 · Cited by 472
High Voltage Operation of Ni‐Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases
Zhao, W., Zheng, J., Zou, L., Jia, H., Liu, B., Wang, H., Engelhard, M. H., Wang, C., Xu, W., Yang, Y., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800297 · Cited by 389
Self-citationAn unique lithium salt for the improved electrolyte of Li-ion battery
Shui Zhang, S. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.06.016 · Cited by 382 · cited 2×
“Second, the decomposition of LiDFOB in electrolyte further enhanced the robustness of SEI and CEI layers by introducing borates or its derivative products, which are able to complex more Li because of the donation of the lone electron pairs on oxygen and boron atoms.(34) Third, the addition of LiDFOB improves the over…”
BackgroundMethodDong, X., Chen, L., Liu, J., Haller, S., Wang, Y., & Xia, Y. (2016) · Science Advances · doi:10.1126/sciadv.1501038 · Cited by 328
Self-citationXu, M., Zhou, L., Hao, L., Xing, L., Li, W., & Lucht, B. L. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.10.050 · Cited by 255
Deciphering the Cathode–Electrolyte Interfacial Chemistry in Sodium Layered Cathode Materials
Mu, L., Feng, X., Kou, R., Zhang, Y., Guo, H., Tian, C., Sun, C., Du, X., Nordlund, D. L., Xin, H. L., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801975 · Cited by 230
Cation Ordering of Zr-Doped LiNiO2 Cathode for Lithium-Ion Batteries
Yoon, C. S., Choi, M.-J., Jun, D.-W., Zhang, Q., Kaghazchi, P., Kim, K.-H., & Sun, Y.-K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00619 · Cited by 227
Schedlbauer, T., Rodehorst, U., Schreiner, C., Gores, H., & Winter, M. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.05.130 · Cited by 46
Lithium difluoro(oxalate)borate for robust passivation of LiNi0.5Mn1.5O4 in lithium-ion batteries
Mun, J., Lee, J., Hwang, T., Lee, J., Noh, H., & Choi, W. (2015) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2015.02.034 · Cited by 30
Cited by
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Self-citationIn situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes
Fan, X., Ou, X., Zhao, W., Liu, Y., Zhang, B., Zhang, J., Zou, L., Seidl, L., Li, Y., Hu, G., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25611-6 · Cited by 488
Self-citationDesigning electrolytes and interphases for high-energy lithium batteries
Wan, H., Xu, J., & Wang, C. (2023) · Nature Reviews Chemistry · doi:10.1038/s41570-023-00557-z · Cited by 472
Self-citationOu, X., Liu, T., Zhong, W., Fan, X., Guo, X., Huang, X., Cao, L., Hu, J., Zhang, B., Chu, Y. S., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30020-4 · Cited by 454
Self-citationAnion-enrichment interface enables high-voltage anode-free lithium metal batteries
Mao, M., Ji, X., Wang, Q., Lin, Z., Li, M., Liu, T., Wang, C., Hu, Y.-S., Li, H., Huang, X., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-36853-x · Cited by 418
Self-citation
Metadata
- Authors
- Deng, T., Fan, X., Cao, L., Chen, J., Hou, S., Ji, X., Chen, L., Li, S., Zhou, X., Hu, E., Su, D., Yang, X.-Q., & Wang, C.
- Venue
- Joule
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 3
- Issue
- 10
- Pages
- 2550-2564
- ISSN
- 2542-4351 (ISSN-L)
- OpenAlex
- W2971746694
- Cited by
- 266
- References
- 28
- FWCI
- 10.05
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.