Design and use of multisine signals for Li-ion battery equivalent circuit modelling. Part 1: Signal design
Open accessThe DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The Pulse Power Current (PPC) profile is often the signal of choice for obtaining the parameters of a Lithium-ion (Li-ion) battery Equivalent Circuit Model (ECM). Subsequently, a drive-cycle current profile is used as a validation signal. Such a profile, in contrast to a PPC, is more dynamic in both the amplitude and frequency bandwidth . Modelling errors can occur when using PPC data for parametrisation since the model is optimised over a narrower bandwidth than the validation profile. A signal more representative of a drive-cycle, while maintaining a degree of generality, is needed to reduce such modelling errors. In Part 1 of this 2-part paper a signal design technique defined as a pulse-multisine is presented. This superimposes a signal known as a multisine to a discharge, rest and charge base signal to achieve a profile more dynamic in amplitude and frequency bandwidth , and thus more similar to a drive-cycle. The signal improves modelling accuracy and reduces the experimentation time, per state-of-charge (SoC) and temperature, to several minutes compared to several hours for an PPC experiment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
A comparative study of equivalent circuit models for Li-ion batteries
Hu, X., Li, S., & Peng, H. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.013 · Cited by 2,179
Huria, T., Ceraolo, M., Gazzarri, J., & Jackey, R. (2012) · 2012 IEEE International Electric Vehicle Conference · doi:10.1109/ievc.2012.6183271 · Cited by 470
Cited by
A brief review on key technologies in the battery management system of electric vehicles
Liu, K., Li, K., Peng, Q., & Zhang, C. (2019) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-018-0516-8 · Cited by 635
Review on state-of-health of lithium-ion batteries: Characterizations, estimations and applications
Yang, S., Zhang, C., Jiang, J., Zhang, W., Zhang, L., & Wang, Y. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128015 · Cited by 435
Zhang, C., Allafi, W., Dinh, Q., Ascencio, P., & Marco, J. (2018) · Energy · doi:10.1016/j.energy.2017.10.043 · Cited by 350
Self-citationA comparison of methodologies for the non-invasive characterisation of commercial Li-ion cells
Barai, A., Uddin, K., Dubarry, M., Somerville, L., McGordon, A., Jennings, P., & Bloom, I. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.01.001 · Cited by 319
Self-citationBarai, A., Uddin, K., Widanage, W. D., McGordon, A., & Jennings, P. (2018) · Scientific Reports · doi:10.1038/s41598-017-18424-5 · Cited by 276
Self-citationConnecting battery technologies for electric vehicles from battery materials to management
Zhao, G., Wang, X., & Negnevitsky, M. (2022) · iScience · doi:10.1016/j.isci.2022.103744 · Cited by 180
“…lumped parameter model) Pulse-multisine signal design methodology, model parameter estimation SoC, battery temperature, amplitude, bandwidth Widanage et al., 2016 Li-S battery – 1D continuum model, Multi-step elementary kinetic model Evolution of solid phases in the carbon/sulfur composite…”
MethodAllafi, W., Uddin, K., Zhang, C., Mazuir Raja Ahsan Sha, R., & Marco, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.07.030 · Cited by 66
Self-citationDineva, A. (2024) · Batteries · doi:10.3390/batteries10100356 · Cited by 52
“While these models provide high precision, their computational demands and simplified assumptions about real-world dynamics can reduce accuracy under dynamic conditions [15].”
Zhang, W., Ahmed, R., & Habibi, S. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235450 · Cited by 52
Grandjean, T. R. B., Groenewald, J., McGordon, A., Widanage, W. D., & Marco, J. (2018) · Batteries · doi:10.3390/batteries4040049 · Cited by 45
Self-citation
Metadata
- Authors
- Widanage, W. D., Barai, A., Chouchelamane, G. H., Uddin, K., McGordon, A., Marco, J., & Jennings, P.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2016-08
- Volume
- 324
- Pages
- 70-78
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W2395900924
- Cited by
- 58
- References
- 3
- FWCI
- 4.27
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.