4D rods: 3D structures via programmable 1D composite rods
Open accessThe DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Abstract
Slender 1D structures are ubiquitous in nature and engineering and serve as building blocks for 3D structures at scales ranging from molecular to architectural. 3D printing enables fabrication of such structures with geometrical complexity that cannot be produced easily by traditional manufacturing methods, but comes with a cost of long building time and need for supporting structures during printing. Some of these limitations are overcome here through an approach that prints 1D rods with composite cross-sections, programmed to deform into a prescribed 3D shape simply upon heating. The straight or curved composite rods consist of a glassy polymer and an elastomer that are bonded to each other as a result of the manufacturing process; the latter is programmed with a compressive stress during the printing process. When heated, the stiff glassy polymer softens, resulting in release of the stress in the elastomer, and causes the 1D structure to deform into a new permanent 3D configuration. The cross-section of the composite rods can be designed to enable deformation modes of bending and twisting, a combination of which can guide the 1D rod into almost any 3D shape. With the use of a nonlinear thermomechanical computational model, several 3D rod structures are designed and demonstrated, highlighting the potential for increased functionality with material and time savings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Behl, M., & Lendlein, A. (2007) · Materials Today · doi:10.1016/s1369-7021(07)70047-0 · Cited by 1,965
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Self-citationActive materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Self-citationHuang, W. M., Ding, Z., Wang, C. C., Wei, J., Zhao, Y., & Purnawali, H. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70128-0 · Cited by 747
Self-citationActive printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
Self-folding of polymer sheets using local light absorption
Liu, Y., Boyles, J. K., Genzer, J., & Dickey, M. D. (2012) · Soft Matter · doi:10.1039/c1sm06564e · Cited by 523
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Self-citation3D printed reversible shape changing components with stimuli responsive materials
Mao, Y., Ding, Z., Yuan, C., Ai, S., Isakov, M., Wu, J., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24761 · Cited by 348
Self-citation
Cited by
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Self-citationAdditive manufacturing — A review of 4D printing and future applications
Mitchell, A., Lafont, U., Hołyńska, M., & Semprimoschnig, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.038 · Cited by 494
Polymer 3D Printing Review: Materials, Process, and Design Strategies for Medical Applications
Arefin, A. M. E., Khatri, N. R., Kulkarni, N., & Egan, P. F. (2021) · Polymers · doi:10.3390/polym13091499 · Cited by 361
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
4D printing reconfigurable, deployable and mechanically tunable metamaterials
Yang, C., Boorugu, M., Dopp, A., Ren, J., Martin, R., Han, D., Choi, W., & Lee, H. (2019) · Materials Horizons · doi:10.1039/c9mh00302a · Cited by 284
Metadata
- Authors
- Ding, Z., Weeger, O., Qi, H. J., & Dunn, M. L.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 137
- Pages
- 256-265
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2764149823
- Cited by
- 156
- References
- 13
- FWCI
- 9.92
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 4D rods: 3D structures via programmable 1D composite rods. https://app.cochat.ai/papers/10.1016/j.matdes.2017.10.004
- The paper
- Ding, Z., Weeger, O., Qi, H. J., & Dunn, M. L. (2018). 4D rods: 3D structures via programmable 1D composite rods. Materials & Design. https://doi.org/10.1016/j.matdes.2017.10.004
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.