The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Fabrication factors influencing mechanical, moisture- and water-related properties of mycelium-based composites
Open accessAbstract
Mycelium-based composites result from the growth of filamentous fungi on organic materials such as agricultural waste streams. These novel biomaterials represent a promising alternative for product design and manufacturing both in terms of sustainable manufacturing processes and circular lifespan. This study shows that their morphology, density, tensile and flexural strength, as well as their moisture- and water-uptake properties can be tuned by varying type of substrate (straw, sawdust, cotton), fungal species (Pleurotus ostreatus vs. Trametes multicolor) and processing technique (no pressing or cold or heat pressing). The fungal species impacts colonization level and the thickness of the air-exposed mycelium called fungal skin. Colonization level and skin thickness as well as the type of substrate determine the stiffness and water resistance of the materials. Moreover, it is shown that heat pressing improves homogeneity, strength and stiffness of the materials shifting their performance from foam-like to cork- and wood-like. Together, these results demonstrate that by changing the fabrication process, differences in performance of mycelium materials can be achieved. This highlights the possibility to produce a range of mycelium-based composites. In fact, it is the first time mycelium composites have been described with natural material properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Hydrophobins: Multipurpose Proteins
Wösten, H. A. B. (2001) · Annual Review of Microbiology · doi:10.1146/annurev.micro.55.1.625 · Cited by 704
Self-citationAdvanced Materials From Fungal Mycelium: Fabrication and Tuning of Physical Properties
Haneef, M., Ceseracciu, L., Canale, C., Bayer, I. S., Heredia-Guerrero, J. A., & Athanassiou, A. (2017) · Scientific Reports · doi:10.1038/srep41292 · Cited by 704
The fungus Armillaria bulbosa is among the largest and oldest living organisms
Smith, M. L., Bruhn, J. N., & Anderson, J. B. (1992) · Nature · doi:10.1038/356428a0 · Cited by 698
Materials Selection for Mechanical Design
Cebon, D., & Ashby, M. (1992) · Computerization and Networking of Materials Databases: Third Volume · doi:10.1520/stp23757s · Cited by 615
Materials and the environment: eco-informed material choice
(2009) · Choice Reviews Online · doi:10.5860/choice.46-6823 · Cited by 530
Mushroom cultivation in the circular economy
Grimm, D., & Wösten, H. A. B. (2018) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-018-9226-8 · Cited by 484
Self-citationMorphology and mechanics of fungal mycelium
Islam, M. R., Tudryn, G., Bucinell, R., Schadler, L., & Picu, R. C. (2017) · Scientific Reports · doi:10.1038/s41598-017-13295-2 · Cited by 361
Holt, G. A., Mcintyre, G., Flagg, D., Bayer, E., Wanjura, J. D., & Pelletier, M. G. (2012) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2012.1241 · Cited by 283
Mycelium composites: a review of engineering characteristics and growth kinetics
Jones, M., Huynh, T., Dekiwadia, C., Daver, F., & John, S. (2017) · Journal of Bionanoscience · doi:10.1166/jbns.2017.1440 · Cited by 270 · cited 1×
“Studies indicate that, like pure mycelium, properties of the mycelium composites depend on the fungus, substrate, growth conditions, and processing of the material, as well as its additives [18].”
Background
Cited by
Engineered mycelium composite construction materials from fungal biorefineries: A critical review
Jones, M., Mautner, A., Luenco, S., Bismarck, A., & John, S. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108397 · Cited by 591
Growing a circular economy with fungal biotechnology: a white paper
Meyer, V., Basenko, E. Y., Benz, J. P., Braus, G. H., Caddick, M. X., Csukai, M., de Vries, R. P., Endy, D., Frisvad, J. C., Gunde-Cimerman, N., et al. (2020) · Fungal Biology and Biotechnology · doi:10.1186/s40694-020-00095-z · Cited by 515
“reproduced from [45], which has been published under a Creative Commons Attribution licence (CC BY, http://creat iveco mmons .”
MethodSelf-citationA comprehensive framework for the production of mycelium-based lignocellulosic composites
Elsacker, E., Vandelook, S., Van Wylick, A., Ruytinx, J., De Laet, L., & Peeters, E. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.138431 · Cited by 308
Physico-mechanical and thermodynamic properties of mycelium-based biocomposites: a review
Girometta, C., Picco, A. M., Baiguera, R. M., Dondi, D., Babbini, S., Cartabia, M., Pellegrini, M., & Savino, E. (2019) · Sustainability · doi:10.3390/su11010281 · Cited by 276
Metadata
- Authors
- Appels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P., & Wösten, H. A. B.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 161
- Pages
- 64-71
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2900989100
- Cited by
- 516
- References
- 19
- FWCI
- 11.07
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fabrication factors influencing mechanical, moisture- and water-related properties of mycelium-based composites. https://app.cochat.ai/papers/10.1016/j.matdes.2018.11.027
- The paper
- Appels, F. V. W., Camere, S., Montalti, M., Karana, E., Jansen, K. M. B., Dijksterhuis, J., Krijgsheld, P., & Wösten, H. A. B. (2019). Fabrication factors influencing mechanical, moisture- and water-related properties of mycelium-based composites. Materials & Design. https://doi.org/10.1016/j.matdes.2018.11.027
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.