The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Effect of laser power on defect, texture, and microstructure of a laser powder bed fusion processed 316L stainless steel
Open accessAbstract
The effect of laser power on defect characteristics, microstructure development, constituent phases, and crystallographic texture was studied on a laser powder bed fusion (L-PBF) processed 316L stainless steel. A series of specimens was additively manufactured as a function of laser power ranging from 380 to 200 W with a fixed scan speed of 300 mm/s. The density, size, shape, and orientation of pores in as-printed L-PBF cylinders were characterized using high-resolution synchrotron X-ray computed microtomography with a 0.65 μm resolution. The changes in the texture and phases were investigated using high-energy synchrotron X-ray diffraction. The melt pool shape and grain size/orientation were also analyzed using metallography. The results show that the porosity increases linearly from 0.13 to 0.88% with the decrease in laser power. However, even with a decrease in laser power by about half and corresponding seven-fold increase in porosity, the 200 W case can still be considered as nearly fully dense. On the other hand, with the same decrease in the laser power, the cellular spacing was refined from 1.5 to 0.75 μm and the texture changed from strong (200) to random. Therefore, within an optimal porosity range, it is feasible to manipulate microstructure significantly using the control of laser power.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fiji: an open-source platform for biological-image analysis
Schindelin, J., Arganda-Carreras, I., Frise, E., Kaynig, V., Longair, M., Pietzsch, T., Preibisch, S., Rueden, C., Saalfeld, S., Schmid, B., et al. (2012) · Nature Methods · doi:10.1038/nmeth.2019 · Cited by 66,890
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Texture Analysis with MTEX – Free and Open Source Software Toolbox
Bachmann, F., Hielscher, R., & Schaeben, H. (2010) · Solid State Phenomena · doi:10.4028/www.scientific.net/ssp.160.63 · Cited by 2,741
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Self-citationThijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
King, W. E., Barth, H. D., Castillo, V. M., Gallegos, G. F., Gibbs, J. W., Hahn, D. E., Kamath, C., & Rubenchik, A. M. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.005 · Cited by 1,616
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Maire, E., & Withers, P. J. (2014) · International Materials Reviews · doi:10.1179/1743280413y.0000000023 · Cited by 1,374
Liverani, E., Toschi, S., Ceschini, L., & Fortunato, A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.05.042 · Cited by 990
TomoPy: a framework for the analysis of synchrotron tomographic data
Gürsoy, D., De Carlo, F., Xiao, X., & Jacobsen, C. (2014) · Journal of Synchrotron Radiation · doi:10.1107/s1600577514013939 · Cited by 963
Self-citationWang, Z., Palmer, T. A., & Beese, A. M. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.019 · Cited by 830
Denudation of metal powder layers in laser powder bed fusion processes
Matthews, M. J., Guss, G., Khairallah, S. A., Rubenchik, A. M., Depond, P. J., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.017 · Cited by 809
Self-citationHardened austenite steel with columnar sub-grain structure formed by laser melting
Saeidi, K., Gao, X., Zhong, Y., & Shen, Z. J. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.12.018 · Cited by 796
On the limitations of Volumetric Energy Density as a design parameter for Selective Laser Melting
Scipioni Bertoli, U., Wolfer, A. J., Matthews, M. J., Delplanque, J.-P. R., & Schoenung, J. M. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.10.037 · Cited by 796
Self-citationFIT2D: a multi-purpose data reduction, analysis and visualization program
Hammersley, A. P. (2016) · Journal of Applied Crystallography · doi:10.1107/s1600576716000455 · Cited by 782
Cherry, J. A., Davies, H. M., Mehmood, S., Lavery, N. P., Brown, S. G. R., & Sienz, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6297-2 · Cited by 755
Selective laser melting of stainless steel 316L with low porosity and high build rates
Sun, Z., Tan, X., Tor, S. B., & Yeong, W. Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.035 · Cited by 714
Landis, E. N., & Keane, D. T. (2010) · Materials Characterization · doi:10.1016/j.matchar.2010.09.012 · Cited by 608
Direct selective laser sintering of metals
Agarwala, M., Bourell, D., Beaman, J., Marcus, H., & Barlow, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510078113 · Cited by 571
Recent advances in X-ray microtomography applied to materials
Stock, S. R. (2008) · International Materials Reviews · doi:10.1179/174328008x277803 · Cited by 517
Kurzynowski, T., Gruber, K., Stopyra, W., Kuźnicka, B., & Chlebus, E. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.01.103 · Cited by 489
Rai, R., Elmer, J. W., Palmer, T. A., & DebRoy, T. (2007) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/40/18/037 · Cited by 473
Simchi, A., & Pohl, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00341-1 · Cited by 377
X-ray microtomography of materials
Stock, S. R. (1999) · International Materials Reviews · doi:10.1179/095066099101528261 · Cited by 366
Yadroitsev, I., & Yadroitsava, I. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1026045 · Cited by 349
Cunningham, R., Narra, S. P., Montgomery, C., Beuth, J., & Rollett, A. D. (2017) · JOM · doi:10.1007/s11837-016-2234-1 · Cited by 334
Damage evolution and failure mechanisms in additively manufactured stainless steel
Carlton, H. D., Haboub, A., Gallegos, G. F., Parkinson, D. Y., & MacDowell, A. A. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.073 · Cited by 313
Flexible manufacturing of metallic products by selective laser melting of powder
Osakada, K., & Shiomi, M. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2006.01.024 · Cited by 294
3D printing and additive manufacturing : principles and applications
Chua, C. K., & Leong, K. F. (2015) · Cited by 246
Zhang, M., Sun, C.-N., Zhang, X., Goh, P. C., Wei, J., Hardacre, D., & Li, H. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.07.071 · Cited by 221
Cunningham, R., Narra, S. P., Ozturk, T., Beuth, J., & Rollett, A. D. (2016) · JOM · doi:10.1007/s11837-015-1802-0 · Cited by 159
Cited by
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Narasimharaju, S. R., Zeng, W., See, T. L., Zhu, Z., Scott, P., Jiang, X., & Lou, S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.12.033 · Cited by 508
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
Metadata
- Authors
- Choo, H., Sham, K.-L., Bohling, J., Ngo, A., Xiao, X., Ren, Y., Depond, P. J., Matthews, M. J., & Garlea, E.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 164
- Pages
- 107534
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2905104026
- Cited by
- 333
- References
- 36
- FWCI
- 16.63
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.