The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Method of enhancing interlayer bond strength in construction scale 3D printing with mortar by effective bond area amplification
Open accessAbstract
3D Construction Printing (3DCP) is a new and emerging technology that is set to revolutionise construction. Currently the technology is in its early stages of development and many hurdles are yet to overcome. Particularly in the field of extrusion 3DCP with cementitious materials, one of the primary hurdles is the weak interface bonds. The weakness in bonds is hypothesised to be present due to the layered fabrication of a stiff cementitious mix that creates a localised void structure. Due to the time gap intervals between depositions, the bond strength decreases due to lack of intermixing. This paper seeks to explore a method to strengthen the interlayer bonds, by applying a cementitious paste at the interface, to minimise voids and promote bond area. Using a flatbed scanner and a unique method of image processing on printed colour layers, a quantitative evaluation of the contact area, “effective bond” area, was determined. The application of these experimental and analytical methods shows that an increase in bond strength is achieved, which is proportional to the effective bond area.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Vision of 3D printing with concrete — Technical, economic and environmental potentials
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.001 · Cited by 1,072
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
Perrot, A., Rangeard, D., & Pierre, A. (2016) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 959
Effect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
Self-citationDigital Concrete: Opportunities and Challenges
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., et al. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.16 · Cited by 636
Nerella, V. N., Hempel, S., & Mechtcherine, V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.235 · Cited by 605
Science and Technology of Concrete Admixtures
Aïtcin, P.-C., & Flatt, R. J. (2016) · Elsevier eBooks · doi:10.1016/c2015-0-00150-2 · Cited by 525
The role of early age structural build-up in digital fabrication with concrete
Reiter, L., Wangler, T., Roussel, N., & Flatt, R. J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.011 · Cited by 432
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.019 · Cited by 353
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.06.013 · Cited by 288
Classification of building systems for concrete 3D printing
Duballet, R., Baverel, O., & Dirrenberger, J. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.018 · Cited by 238
Current Progress of 3D Concrete Printing Technologies
Nematollahi, B., Xia, M., & Sanjayan, J. (2017) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2017/0035 · Cited by 220
Self-citationXia, M., Nematollahi, B., & Sanjayan, J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.01.013 · Cited by 202
Self-citationImpact of chemical admixtures on cement hydration
Marchon, D., & Flatt, R. J. (2015) · Elsevier eBooks · doi:10.1016/b978-0-08-100693-1.00012-6 · Cited by 141
Automatic crack monitoring using photogrammetry and image processing
Valença, J., Dias‐da‐Costa, D., Júlio, E., et al. (2012) · Measurement · doi:10.1016/j.measurement.2012.07.019 · Cited by 111
Interlayer Strength of 3D Printed Concrete
Marchment, T., Sanjayan, J., Nematollahi, B., & Xia, M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-815481-6.00012-9 · Cited by 73
Self-citationInvestigation of concrete mixtures for additive construction
Rushing, T. S., Al‐Chaar, G. K., Eick, B., Burroughs, J. F., Shannon, J. D., Barna, L. A., & Case, M. P. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-09-2015-0124 · Cited by 70
Inclined layer printing for fused deposition modeling without assisted supporting structure
Zhao, H., He, Y., Fu, J., & Qiu, J. (2017) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.11.011 · Cited by 70
Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
Bong, S. H., Nematollahi, B., Nazari, A., et al. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_1 · Cited by 52
Xia, M., Nematollahi, B., & Sanjayan, J. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_23 · Cited by 35
Self-citation
Cited by
Wangler, T., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 612
Mix design concepts for 3D printable concrete: A review
Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104155 · Cited by 421
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Mesh reinforcing method for 3D Concrete Printing
Marchment, T., & Sanjayan, J. (2020) · Automation in Construction · doi:10.1016/j.autcon.2019.102992 · Cited by 347
Self-citationArunothayan, A. R., Nematollahi, B., Ranade, R., Bong, S. H., & Sanjayan, J. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119546 · Cited by 347
Self-citation
Metadata
- Authors
- Marchment, T., Sanjayan, J., & Xia, M.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 169
- Pages
- 107684
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2920275820
- Cited by
- 281
- References
- 23
- FWCI
- 17.09
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.