The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties
Open accessAbstract
Additive manufacturing technologies provide new opportunities for the manufacturing of components with customisable geometries and mechanical properties. In particular, fused deposition modelling (FDM) allows for customisable mechanical properties by controlling the void density and filament orientation. In this work, a methodology is provided for the prediction of the mechanical properties and mesostructure of FDM polymers. To this end, we propose a computational framework for the simulation of the printing process taking as input data specific manufacturing parameters and filament properties. A new two-stage thermal and sintering model is developed to predict the bond formation process between filaments. The model predictions are validated against original experimental data for acrylonitrile butadiene styrene (ABS) components manufactured by FDM. A parametric study is finally presented to interpret the effects of different manufacturing parameters on the mechanical performance of ABS specimens. Overall, the proposed framework offers new avenues for the design of 3D printed polymeric components with custom properties, directly in terms of manufacturing settings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Anisotropic material properties of fused deposition modeling ABS
Ahn, S., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210441166 · Cited by 2,382
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Chacón, J. M., Caminero, M. A., García-Plaza, E., & Núñez, P. J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.065 · Cited by 1,603
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.016 · Cited by 1,318
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Modeling of Bond Formation Between Polymer Filaments in the Fused Deposition Modeling Process
Bellehumeur, C., Li, L., Sun, Q., & Gu, P. (2004) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(04)70071-7 · Cited by 768
(1945) · Medical Entomology and Zoology · Cited by 618
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2012) · Journal of Advanced Research · doi:10.1016/j.jare.2011.05.001 · Cited by 576
Rankouhi, B., Javadpour, S., Delfanian, F., & Letcher, T. (2016) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-016-0113-2 · Cited by 457
Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling
Ziemian, C., Sharma, M., & Ziemi, S. (2012) · Mechanical Engineering · doi:10.5772/34233 · Cited by 387
Rodríguez, J. F., Thomas, J. P., & Renaud, J. E. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110395547 · Cited by 362
Isotropic and anisotropic elasticity and yielding of 3D printed material
Zou, R. X., Xia, Y., Liu, S., Hu, P., Hou, W., Hu, Q., & Shan, C. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.06.009 · Cited by 358
Composite Modeling and Analysis for Fabrication of FDM Prototypes with Locally Controlled Properties
Li, L., Sun, Q., Bellehumeur, C. T., & Gu, P. (2002) · Journal of Manufacturing Processes · doi:10.1016/s1526-6125(02)70139-4 · Cited by 306
Estimation of filament temperature and adhesion development in fused deposition techniques
Costa, S. F., Duarte, F. M., & Covas, J. A. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.02.026 · Cited by 293
Torrado, A. R., & Roberson, D. A. (2016) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-016-0067-4 · Cited by 291
Modification of Frenkel's model for sintering
Pokluda, O., Bellehumeur, C. T., & Vlachopoulos, J. (1997) · AIChE Journal · doi:10.1002/aic.690431213 · Cited by 281
Fracture resistance measurement of fused deposition modeling 3D printed polymers
Aliheidari, N., Tripuraneni, R., Ameli, A., & Nadimpalli, S. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.03.016 · Cited by 244
An experimental study and model assessment of polymer sintering
Bellehumeur, C. T., Bisaria, M. K., & Vlachopoulos, J. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10617 · Cited by 236
Characterization of the mesostructure of fused‐deposition acrylonitrile‐butadiene‐styrene materials
Rodriguez, J. F., Thomas, J. P., & Renaud, J. E. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337056 · Cited by 226
Costa, S. F., Duarte, F. M., & Covas, J. A. (2014) · Virtual and Physical Prototyping · doi:10.1080/17452759.2014.984042 · Cited by 224
Young’s modulus and volume porosity relationships for additive manufacturing applications
Choren, J. A., Heinrich, S. M., & Silver-Thorn, M. B. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7237-5 · Cited by 208
Hopper, R. W. (1984) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1984.tb19692.x · Cited by 158
(2012) · InTech eBooks · doi:10.5772/2397 · Cited by 126
Bähr, F., & Westkämper, E. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.03.048 · Cited by 96
Modeling the Fracture Strength between Fused-Deposition Extruded Roads 16
Thomas, J. P., & Rodriguez, J. F. (2000) · doi:10.26153/tsw/2054 · Cited by 80
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
A review on voids of 3D printed parts by fused filament fabrication
Tao, Y., Kong, F., Li, Z., Zhang, J., Zhao, X., Yin, Q., Xing, D., & Li, P. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.10.108 · Cited by 443
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Optimisation of Strength Properties of FDM Printed Parts—A Critical Review
Syrlybayev, D., Zharylkassyn, B., Seisekulova, A., Akhmetov, M., Perveen, A., & Talamona, D. (2021) · Polymers · doi:10.3390/polym13101587 · Cited by 352
Shanmugam, V., Rajendran, D. J. J., Babu, K., Rajendran, S., Veerasimman, A., Marimuthu, U., Singh, S., Das, O., Neisiany, R. E., Hedenqvist, M. S., et al. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106925 · Cited by 268
Metadata
- Authors
- Garzon-Hernandez, S., Garcia-Gonzalez, D., Jérusalem, A., & Arias, A.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 188
- Pages
- 108414
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2998098840
- Cited by
- 350
- References
- 26
- FWCI
- 15.22
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.