The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Performance of different coating materials against high temperature oxidation in boiler tubes – A review
Abstract
Abstract At presently, the failure of a boiler is big hazard to the effectiveness of the boiler in the power plants. In coal fired boilers, erosion and corrosion at high temperature is responsible for the downtimes, which directly affect the economic loss. In the present review report, the current situation of combating the high temperature erosion and corrosion to the boiler surface has been discussed. The thermal spray coating techniques used for protecting the boilers has been studied in regard to the performance of different coating materials deposited using different coating methods. The performance of the developed coatings under high temperature oxidation has been reported. This article may help to researchers to select the best coating combination and method to resist the failure of boiler.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The application of anti-corrosion coating seems to be the most effective and commercial mothed to mitigate hot corrosion.”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [34]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Damage Mechanisms and Life Assessment of High-Temperature Components
Viswanathan, R. (1989) · doi:10.31399/asm.tb.dmlahtc.9781627083409 · Cited by 751
Na2SO4-induced accelerated oxidation (hot corrosion) of nickel
Goebel, J. A., & Pettit, F. S. (1970) · Metallurgical Transactions · doi:10.1007/bf02642794 · Cited by 284
Hot corrosion of materials: Fundamental studies
Rapp, R. A., & Zhang, Y.-S. (1994) · JOM · doi:10.1007/bf03222665 · Cited by 247
Accelerated hot corrosion studies of cold spray Ni–50Cr coating on boiler steels
Bala, N., Singh, H., & Prakash, S. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.06.033 · Cited by 128
Bala, N., Singh, H., Prakash, S., & Karthikeyan, J. (2012) · Journal of Thermal Spray Technology · doi:10.1007/s11666-011-9698-x · Cited by 63
Kaushal, G., Bala, N., Kaur, N., Singh, H., & Prakash, S. (2014) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-013-1984-4 · Cited by 39
Kaushal, G., Singh, H., & Prakash, S. (2011) · Oxidation of Metals · doi:10.1007/s11085-011-9245-7 · Cited by 35
Singh, H., Gitanjaly, Singh, S., & Prakash, S. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.03.040 · Cited by 33
Self-citationKumar, M., Singh, H., Singh, N., & Joshi, R. S. (2015) · Wear · doi:10.1016/j.wear.2015.01.043 · Cited by 32
Rani, A., Bala, N., & Gupta, C. M. (2017) · Oxidation of Metals · doi:10.1007/s11085-017-9759-8 · Cited by 28
Research works printed but not linked: 77
- Srikanth, 2003, Analysis of failures in boiler tubes due to fireside corrosion in a waste heat recovery boiler, Eng. Failure Anal., 10, 59, 10.1016/S1350-6307(02)00030-4 · DOI
- Shih, 1989, Sub-melting point hot corrosion of alloys and coatings, J.Mater. Sci. Eng. A, 120, 277, 10.1016/0921-5093(89)90751-X · DOI
- Pettit, 2011, Hot corrosion of metals and alloys, Oxidation Met., 76, 1, 10.1007/s11085-011-9254-6 · DOI · Paper page
- Edris, 1997, Sturgeon, micro-structural characterization of HVOF sprayed coatings of inconel 625, J. Mater., 32, 863, 10.1023/A:1018589230250 · DOI
- Hancock, 2006, Vanadic and chloride attack of super alloys, Mater. Sci. Technol., 3, 536, 10.1080/02670836.1987.11782265 · DOI
- Rapp, 1986, Chemistry and electrochemistry of the hot corrosion of metals, Corrosion, 42, 568, 10.5006/1.3583026 · DOI · Paper page
- Meier, 1989, A review of advances in high-temperature corrosion, Mater. Sci. Eng. A, 120, 1, 10.1016/0921-5093(89)90712-0 · DOI
- Stringer, 1987, High temperature corrosion of super alloys, Mater. Sci. Technol., 3, 482, 10.1080/02670836.1987.11782259 · DOI · Paper page
- Goebel, 1970, The influence of sulphides on the oxidation behaviour of nickel-base goebel, alloys, Metall. Trans., 1, 3421, 10.1007/BF03037874 · DOI
- Gurrappa, 2014, The importance of hot corrosion and its effective prevention for enhanced efficiency of gas, Turbines
- Singh, 2008, Sliding wear performance of high-velocity-oxy-fuel spray Al2O3/TiO2 and Cr2O3 coatings, Eng. Tribol., 222, 601
- Mishra, 2015, Hot corrosion performance of LVOF sprayed Al2O3–40% TiO2 coating on superni 601 and superco 605 super alloys at 800 and 900°C, J. Bull., Mater. Sci., 1
- Chawla, 2011, Performance of nano-structured metal nitride coated T-22 boiler steel in Na2SO4–60% V2O5 environment at 900°C under cyclic conditions, J. Min. Mater. Charact. Eng., 10, 583
- Mudgal, 2015, Evaluation of ceria-added Cr3C2-25(NiCr) coating on three superalloys under simulated incinerator environment, J. Therm. Spray Tech., 24, 496, 10.1007/s11666-014-0209-8 · doi:10.1007/s11666-014-0209-8
- Mishra, 2014, Hot corrosion behaviour of detonation gun sprayed Al2O3–40TiO2 coating on nickel based super alloys at 900°C, Indian J. Mater. Sci., 5
- Saladi, 2015, Effect of CeO2 on cyclic hot-corrosion behavior of detonation-gun sprayed Cr3C2-NiCr coatings on Ni-based super alloy, Mater. Eng. Perform., 24, 1379, 10.1007/s11665-015-1400-x · DOI
- Mudgal, 2014, Corrosion behavior of bare, Cr3C2–25% (Ni-Cr), and Cr3C2–25% (NiCr) +0.4%CeO2-coated superni 600 under molten salt at 900°C, Mater. Eng. Perform., 23, 3805, 10.1007/s11665-014-1177-3 · DOI
- Singh, 2017, Hot corrosion behavior of CNT reinforced Al2O3 coated T-11 boiler steel in Na2SO4-60% V2O5 environment at 900°C under cyclic condition, Int. J. Eng. Sci. Invent. Res. Develop., 3, 507
- Kamal, 2008, Hot corrosion behaviour of detonation gun-sprayed Cr3C2-NiCr coating on Ni and Fe based superalloys in Na2SO4-60%V2O5 environment at 900°C, Alloys Compd., 463, 358, 10.1016/j.jallcom.2007.09.019 · DOI
- Kamal, 2009, Evaluation of cyclic hot corrosion behaviour of detonation gun sprayed Cr3C2-25%NiCr coating on nickel and Iron based super alloys, J. Surf. Coatings Technol., 203, 1004, 10.1016/j.surfcoat.2008.09.031 · DOI
- Sidhu, 2006, Hot corrosion study of HOVF sprayed Cr3C2 Ni-Cr and Ni-20Cr coating on nickel based super alloy at 900°C, Surf. Coat. Technol., 792–800
- Sidhu, 2006, Evaluation of hot corrosion behavior of LPG assisted HVOF NiCr wire sprayed boiler tube steel in molten salt environment, ISIJ Int., 46, 1067, 10.2355/isijinternational.46.1067 · DOI
- Sidhu, 2006, Characterization of HOVF sprayed NiCrBSi coating Ni- and Fe based super alloy in molten salt environment, Thin Solid Film, 515, 95, 10.1016/j.tsf.2005.12.041 · DOI
- Sidhu, 2006, Hot corrosion resistance of high-velocity oxyfuel sprayed coatings on a nickel-base superalloy in molten salt environment, J. Therm. Spray Technol., 15, 387, 10.1361/105996306X124392 · DOI
- Singh, 2017, Comparative study of hot corrosion behavior of HVOF and plasma sprayed Ni20Cr coating on SA213(T22) boiler steel in Na2SO4-60%V2O5 environment, IJESRT, 6, 674
- Singh, 2016, Performance of Cr3C2-25(Ni-20Cr) and Ni-20Cr coatings on T91 boiler tube steel in simulated boiler environment at 900°C, Chem. Mater. Eng., 4, 57, 10.13189/cme.2016.040401 · doi:10.13189/cme.2016.040401
- Kaushal, 2011, High temperature corrosion behaviour of HVOF-sprayed Ni-20Cr coating on boiler steel in molten salt environment at 900°C, Int. J. Surface Sci. Eng., 5, 415, 10.1504/IJSURFSE.2011.044388 · DOI
- Sidhu, 2006, A comparative study of hot corrosion resistance of HVOF sprayed NiCrBSi and stellite-6 coated Ni based super alloy at 900°C, Mater. Sci. Eng., 445–446, 1
- Sidhu, 2006, Hot corrosion behavior of HVOF sprayed coatings on ASTM SA213-T11 steel, Thermal Spray Technol., 6, 349, 10.1007/s11666-007-9029-4 · DOI
- Sidhu, 2006, Hot corrosion behaviour of HVOF sprayed NiCrBSi coating on Ni and Fe based super alloy in Na2SO4-60%V2O5 environment, Acta Mater., 54, 773, 10.1016/j.actamat.2005.10.009 · DOI
- Singh, 2006, Cyclic oxidation behavior of some plasma-sprayed coatings in Na2SO4-60%V2O5 environment, Materi. Eng. Perform., 15, 729, 10.1361/105994906X150858 · DOI
- Prakash, 2005, Hot corrosion behaviour of plasma sprayed coating on Ni-based super-alloy on Na2SO4-60%V2O5 environment, ISIJ Int., 45, 886, 10.2355/isijinternational.45.886 · DOI
- Singh, 2007, Investigations on role of plasma sprayed NiCrAlY and Ni–20Cr coatings to combat hot corrosion, Mater. Sci. Technol., 23, 736, 10.1179/174328407X185785 · DOI
- Gonda, 2012, High temperature oxidation and hot corrosion behaviour of Yttria- stabilised zirconia as plasma sprayed coating in air and salt at 900°C under cyclic condition, Min. Mater. Charact. Eng., 11, 285
- Singh, 2006, Hot corrosion of plasma sprayed Ni3Al coating on a Ni based super-alloy, Mat. Corrosion, 58, 857, 10.1002/maco.200704072 · DOI
- Sidhu, 2006, Performance of Ni-Cr AlY, Ni-Cr, Stellite −6, and Ni3 Al coating in Na2SO4-60% V2O5 environment at 900°C under cyclic conditions, Surface Coating Env., 143, 1643, 10.1016/j.surfcoat.2006.02.035 · DOI
- Sidhu, 2006, Studies on the behavior of Stellite-6 as plasma sprayed and laser Remelted coating in molten salt environment at 900°C under cyclic conditions, Mater. Sci. Technol., 172, 52
- Singh, 2005, Some studies on hot corrosion performance of plasma sprayed coating on a Fe-based super alloy, Surf. Coat. Technol., 192, 27, 10.1016/j.surfcoat.2004.03.030 · DOI
- Sidhu, 2003, Evaluation of the corrosion behaviour of plasma sprayed Ni3Al coating on steel in oxidation and molten salt environment at 900°C, Surface Coating Technol., 166, 89, 10.1016/S0257-8972(02)00772-7 · DOI
- Bala, 2009, High temperature corrosion behavior of cold spray Ni-20Cr coating on boiler steel in molten salt environment at 900°C, J. Therm. Spray Technol., 19, 110
- Kai, 2014, Oxidation and hot corrosion behaviors of HVAF-sprayed conventional and Nano-structured NiCr C coatings, J. Trans Non Ferrous Met. Soc. China, 19, 1151
- Kaur, 2009, Role of detonation gun spray Cr3C2–NiCr coating in improving high temperature corrosion resistance of SAE–213–T22 and SAE–347H steel in presence of Na2SO4– 82%Fe2(SO4)3 salt deposits, Surf. Eng., 26, 428, 10.1179/026708409X12490360425963 · DOI
- Shukla, 2016, Degradation behaviour and microstructural characterisation of HVOF-sprayed Cr3C2-NiCr coatings in molten salt environment, Int. J. Mater. Prod. Technol., 53, 15, 10.1504/IJMPT.2016.076364 · doi:10.1504/ijmpt.2016.076364
- Kaur, 2012, High temperature behavior of high velocity oxy-fuel sprayed Cr3C2−NiCr coating, Metall. Mater. Trans., 43-A, 2979, 10.1007/s11661-012-1118-4 · DOI
- Kaur, 2009, High-temperature corrosion studies of HVOF-sprayed Cr3C2-NiCr coating on SAE-347H boiler steel, Thermal Spray Technol., 18, 619, 10.1007/s11666-009-9371-9 · DOI
- Somasundara, 2014, Hot corrosion behavior of HVOF sprayed Cr3C2–35% NiCr+5%Si coating in the presence of Na2SO4–60%V2O5 at 700°C, Trans. Indian Inst. Met., 1
- Jianga, 2017, The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings, Surf. Eng., 1
- Jegadeeswaran, 2013, Hot corrosion study on as received and HVOF sprayed AL2O3+CoCrAlTaY on Ti-31 alloy in salt environment, Procedia Eng., 64, 1013, 10.1016/j.proeng.2013.09.178 · DOI
- Sidhu, 2007, Oxidation and hot corrosion resistance of HVOF WC-Ni-Cr-Fe-sib coating on Ni and Fe-based super alloy at 800°C, J. Therm. Spray Technol., 16, 844, 10.1007/s11666-007-9106-8 · DOI
- Katiki, 2014, Performance of plasma spray coatings on Inconel 625 in air oxidation and molten salt environment at 800 °C, Int. J. Chem. Tech. Res., 6, 2744
- Katiki, 2014, Comparative high temperature corrosion studies on zirconium dioxide coated Inconel 625 in air and molten salt environment, Int. J. Chem. Tech. Res., 6, 4579
- Singh, 2017, Hot corrosion studies of plasma-sprayed chromium oxide coatings on boiler tube steel at 850°C in simulated boiler environment, Iran J. Sci. Technol. Trans Mech. Eng., 1–7
- Kumar, 2015, Development of erosion-corrosion-resistant cold-spray nanostructure Ni-20Cr coating for coal-fired boiler application, Thermal Spray Technol., 1
- Kumar, 2013, production of nanostructure Ni-20Cr coatings for high-temperature applications, Thermal Spray Technol., 1, 1
- Sidhu, 2006, Evaluation of the behavior of shrouded plasma spray coatings in the platen super heater of coal-fired boiler, Metall. Mater. Trans., 37, 1927, 10.1007/s11661-006-0135-6 · DOI
- Sidhu, 2005, Nickel-chromium plasma spray coatings: a way to enhance degradation resistance of boiler tube steels in boiler environment, Thermal Spray Technol., 15, 131, 10.1361/105996306X92695 · DOI
- B.S. Sidhu, S. Prakash, Erosion - corrosion of plasma as sprayed and laser Re-melted stellite-6 coating in a coal fired boiler, (2005)1035–1044. · DOI
- Bhatia, 2015, High temperature behavior of Cr3C2-NiCr coatings in the actual coal-fired boiler environment, Metall. Mater. Trans. E, 1011
- Chatha, 2016, Performance of 75Cr3C2-25NiCr coating produced by HVOF process in a coal-fired thermal power plant, Adv. Mater. Res., 88, 10.4028/www.scientific.net/AMR.1137.88 · DOI
- Chatha, 2012, High-temperature behavior of Ni-Cr coated T91 boiler steel in the platen superheated of coal-fired boiler, Thermal Spray Technol., 22, 838, 10.1007/s11666-013-9899-6 · DOI · Paper page
- Mishra, 2013, Erosion corrosion performance of Ni-CrAlY coating produced by plasma spray process in a coal fired thermal power plant, Surf. Coat. Technol., 23–34
- Mishra, 2005, Erosion–corrosion behavior of Ni–20Cr plasma coating in actual boiler environment, Surf. Eng., 31, 29, 10.1179/1743294414Y.0000000338 · DOI · Paper page
- Kaur, 2012, High-temperature behavior of a high-velocity oxy-fuel sprayed Cr3C2-NiCr coating, Metall. Mater. Trans., 43, 2979, 10.1007/s11661-012-1118-4 · DOI
- Bala, 2016, Performance of cold sprayed Ni based coating in actual boiler environment, Surface Coating Technol., SCT-21821, 1
- Kaushal, 2012, Performance of detonation gun-sprayed Ni-20Cr coating on ASTM A213 TP347H steel in a boiler environment, Thermal Spray Technol., 1
- Kaushal, 2011, S, comparative high temperature analysis of HVOF sprayed and detonation gun sprayed Ni–20Cr coating in laboratory and actual boiler environment, Oxid. Met., 76, 169, 10.1007/s11085-011-9245-7 · DOI · Paper page
- Kaushal, 2011, High-temperature Erosion-corrosion performance of high-velocity oxy-fuel sprayed Ni-20Cr coating in actual boiler environment, Metall. Mater. Trans. A, 42A, 1836, 10.1007/s11661-010-0587-6 · DOI
- Sapra, 2009, Performance of Al2O3–3%TiO2 D-gun coated ferritic steels in coal fired boiler, Surface Sci. Eng., 145
- Shukla, 2012, Hot corrosion studies of HVOF-sprayed Cr3C2-NiCr coating on 310S stainless steel in an actual environment of a coal fired boiler, Adv. Mater. Res., 483–487
- Bala, 2012, Performance of cold sprayed Ni-20Cr and Ni-50Cr coatings on SA-516 in actual industrial environment of a coal fired boiler, Mater. Corrosion, 63, 1
- Kaur, 2011, Surface engineering analysis of D-gun sprayed Cr3C2-NiCr coating under high temperature oxidation and oxidation-erosion environment, Surface Coating Technol., 530, 10.1016/j.surfcoat.2011.07.077 · doi:10.1016/j.surfcoat.2011.07.077
- Natesan, 1976, Corrosion-Erosion behavior of materials in a coal-gasification environment, Corrosion, 32, 364, 10.5006/0010-9312-32.9.364 · DOI
- Tsai, 2002, A review of uses, environmental hazards and recovery/recycle technologies of perfluorocarbons (PFCs) emissions from the semiconductor manufacturing processes, J. Loss Prev. Process Ind., 15, 65, 10.1016/S0950-4230(01)00067-5 · DOI · Paper page
- Koropchak, 1990, Evidence for aerosol ionic redistribution within aerosols produced by chrome electroplating, Environ. Sci. Technol., 24, 1861, 10.1021/es00082a012 · DOI
- Young, 1965, Health hazards of electroplating, J. Occup. Environ. Med., 7, 348, 10.1097/00043764-196507000-00008 · DOI
- Vasudev, 2019, High temperature oxidation and eroion behaviour of HVOF sprayed bilayer Alloy-718/NiCrAlY coating, Surf. Coat. Technol., 362, 366, 10.1016/j.surfcoat.2019.02.012 · doi:10.1016/j.surfcoat.2019.02.012
- Vasudev, 2017, A review on tribo-corrosion of coatings in glass manufacturing industry and performance of coating techniques against high temperature corrosion and wear, i-manager’s J. Mater. Sci., 5, 38
Cited by
A review on molten sulfate salts induced hot corrosion
Hu, S., Finklea, H., & Liu, X. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.03.013 · Cited by 183
Metadata
- Authors
- Singh, J., Vasudev, H., & Singh, S.
- ORCID
- Vasudev, Hitesh
- Venue
- Materials Today: Proceedings
- Publisher
- Elsevier BV
- Published
- 2020
- Volume
- 26
- Pages
- 972-978
- ISSN
- 2214-7853
- Cited by
- 69
- References
- 10
- Language
- en
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Performance of different coating materials against high temperature oxidation in boiler tubes – A review. https://app.cochat.ai/papers/10.1016/j.matpr.2020.01.156
- The paper
- Singh, J., Vasudev, H., & Singh, S. (2020). Performance of different coating materials against high temperature oxidation in boiler tubes – A review. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2020.01.156
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.