The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Stretchable and fatigue-resistant materials
Abstract
In developing a material for a load-bearing application, attention inevitably falls on the resistance of the material to the growth of a crack, characterized by toughness under monotonic load, and by threshold under cyclic load. Many methods have been discovered to enhance toughness, but they do not enhance threshold. For example, stretch-induced crystallization and inorganic fillers have made the toughness of natural rubber well above 10000 J/m2, but have left the threshold of natural rubber around 50 J/m2. Here we describe a principle of stretchable and fatigue-resistant materials. To illustrate the principle, we embed unidirectional fibers of a soft and stretchable material in a matrix of a much softer and much more stretchable material, and adhere the fibers and the matrix by sparse and covalent interlinks. When the composite is cut with a crack and subject to a load, the soft matrix shears readily and delocalizes the high stretch of a fiber over a long segment. A threshold of 1290 J/m2 is reached, below which the composite does not suffer any mode of failure (fiber break, kink crack, or matrix fracture). The principle of stretchable and fatigue-resistant materials is applicable to various materials, layouts, and methods of fabrication, opening an enormous design space for general applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Highly stretchable and tough hydrogels
Sun, J.-Y., Zhao, X., Illeperuma, W. R. K., Chaudhuri, O., Oh, K. H., Mooney, D. J., Vlassak, J. J., & Suo, Z. (2012) · Nature · doi:10.1038/nature11409 · Cited by 5,481
Self-citationKim, D.-H., Lu, N., Ma, R., Kim, Y.-S., Kim, R.-H., Wang, S., Wu, J., Won, S. M., Tao, H., Islam, A., et al. (2011) · Science · doi:10.1126/science.1206157 · Cited by 4,836
Designing hydrogels for controlled drug delivery
Li, J., & Mooney, D. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.71 · Cited by 4,832
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Double‐Network Hydrogels with Extremely High Mechanical Strength
Gong, J. P., Katsuyama, Y., Kurokawa, T., & Osada, Y. (2003) · Advanced Materials · doi:10.1002/adma.200304907 · Cited by 4,542
Yuk, H., Lu, B., & Zhao, X. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00595h · Cited by 2,108
The rise of plastic bioelectronics
Someya, T., Bao, Z., & Malliaras, G. G. (2016) · Nature · doi:10.1038/nature21004 · Cited by 1,884
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Stretchable, Transparent, Ionic Conductors
Keplinger, C., Sun, J.-Y., Foo, C. C., Rothemund, P., Whitesides, G. M., & Suo, Z. (2013) · Science · doi:10.1126/science.1240228 · Cited by 1,754
Self-citationFiber-reinforced composites : materials, manufacturing, and design
Mallick, P. K. (2008) · Thammasat University Digital Collections · Cited by 1,718
Yang, C., & Suo, Z. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0018-7 · Cited by 1,709
Self-citationTough adhesives for diverse wet surfaces
Li, J., Celiz, A. D., Yang, J., Yang, Q., Wamala, I., Whyte, W., Seo, B. R., Vasilyev, N. V., Vlassak, J. J., Suo, Z., et al. (2017) · Science · doi:10.1126/science.aah6362 · Cited by 1,598
Self-citationSynthetic biology: applications come of age
Khalil, A. S., & Collins, J. J. (2010) · Nature Reviews Genetics · doi:10.1038/nrg2775 · Cited by 1,373
Toughening Elastomers with Sacrificial Bonds and Watching Them Break
Ducrot, E., Chen, Y., Bulters, M., Sijbesma, R. P., & Creton, C. (2014) · Science · doi:10.1126/science.1248494 · Cited by 1,203
Skin-inspired hydrogel–elastomer hybrids with robust interfaces and functional microstructures
Yuk, H., Zhang, T., Parada, G. A., Liu, X., & Zhao, X. (2016) · Nature Communications · doi:10.1038/ncomms12028 · Cited by 1,035
Whitesides, G. M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800907 · Cited by 850
Anti-fatigue-fracture hydrogels
Lin, S., Liu, X., Liu, J., Yuk, H., Loh, H.-C., Parada, G. A., Settens, C., Song, J., Masic, A., McKinley, G. H., et al. (2019) · Science Advances · doi:10.1126/sciadv.aau8528 · Cited by 662
Muscle-like fatigue-resistant hydrogels by mechanical training
Lin, S., Liu, J., Liu, X., & Zhao, X. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1903019116 · Cited by 636
Soft network composite materials with deterministic and bio-inspired designs
Jang, K.-I., Chung, H. U., Xu, S., Lee, C. H., Luan, H., Jeong, J., Cheng, H., Kim, G.-T., Han, S. Y., Lee, J. W., et al. (2015) · Nature Communications · doi:10.1038/ncomms7566 · Cited by 533
Jinno, H., Fukuda, K., Xu, X., Park, S., Suzuki, Y., Koizumi, M., Yokota, T., Osaka, I., Takimiya, K., & Someya, T. (2017) · Nature Energy · doi:10.1038/s41560-017-0001-3 · Cited by 471
Stretchable materials of high toughness and low hysteresis
Wang, Z., Xiang, C., Yao, X., Le Floch, P., Mendez, J., & Suo, Z. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1821420116 · Cited by 433
Self-citation3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems
Tian, K., Bae, J., Bakarich, S. E., Yang, C., Gately, R. D., Spinks, G. M., in het Panhuis, M., Suo, Z., & Vlassak, J. J. (2017) · Advanced Materials · doi:10.1002/adma.201604827 · Cited by 419
Self-citationMechanisms of reversible stretchability of thin metal films on elastomeric substrates
Lacour, S. P., Chan, D., Wagner, S., Li, T., & Suo, Z. (2006) · Applied Physics Letters · doi:10.1063/1.2201874 · Cited by 413
Self-citationBai, R., Yang, J., & Suo, Z. (2019) · European Journal of Mechanics - A/Solids · doi:10.1016/j.euromechsol.2018.12.001 · Cited by 346
Self-citationBhattacharjee, N., Parra‐Cabrera, C., Kim, Y. T., Kuo, A. P., & Folch, A. (2018) · Advanced Materials · doi:10.1002/adma.201800001 · Cited by 322
Stretchable Ionics – A Promising Candidate for Upcoming Wearable Devices
Lee, H., Kim, C., & Sun, J. (2018) · Advanced Materials · doi:10.1002/adma.201704403 · Cited by 319
Large Strain and Fracture Properties of Poly(dimethylacrylamide)/Silica Hybrid Hydrogels
Lin, W.-C., Fan, W., Marcellan, A., Hourdet, D., & Creton, C. (2010) · Macromolecules · doi:10.1021/ma901937r · Cited by 314
Fatigue fracture of tough hydrogels
Bai, R., Yang, Q., Tang, J., Morelle, X. P., Vlassak, J., & Suo, Z. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.07.002 · Cited by 312
Self-citationFlaw sensitivity of highly stretchable materials
Chen, C., Wang, Z., & Suo, Z. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.10.002 · Cited by 278
Self-citationTang, J., Li, J., Vlassak, J. J., & Suo, Z. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.09.010 · Cited by 240
Self-citationFatigue of double-network hydrogels
Zhang, W., Liu, X., Wang, J., Tang, J., Hu, J., Lu, T., & Suo, Z. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.10.018 · Cited by 240
Self-citationStrong fiber-reinforced hydrogel
Agrawal, A., Rahbar, N., & Calvert, P. D. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.011 · Cited by 198
Energy‐Dissipative Matrices Enable Synergistic Toughening in Fiber Reinforced Soft Composites
Huang, Y., King, D. R., Sun, T. L., Nonoyama, T., Kurokawa, T., Nakajima, T., & Gong, J. P. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605350 · Cited by 179
Additive manufacturing of hydrogel-based materials for next-generation implantable medical devices
Chin, S. Y., Poh, Y. C., Kohler, A.-C., Compton, J. T., Hsu, L. L., Lau, K. M., Kim, S., Lee, B. W., Lee, F. Y., & Sia, S. K. (2017) · Science Robotics · doi:10.1126/scirobotics.aah6451 · Cited by 172
Fatigue Fracture of Self-Recovery Hydrogels
Bai, R., Yang, J., Morelle, X. P., Yang, C., & Suo, Z. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00045 · Cited by 164
Self-citationWearable and Washable Conductors for Active Textiles
Le Floch, P., Yao, X., Liu, Q., Wang, Z., Nian, G., Sun, Y., Jia, L., & Suo, Z. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07361 · Cited by 163
Self-citationFatigue fracture of nearly elastic hydrogels
Zhang, E., Bai, R., Morelle, X. P., & Suo, Z. (2018) · Soft Matter · doi:10.1039/c8sm00460a · Cited by 162
Self-citationFracture Toughness and Fatigue Threshold of Tough Hydrogels
Zhang, W., Hu, J., Tang, J., Wang, Z., Wang, J., Lu, T., & Suo, Z. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.8b00788 · Cited by 158
Self-citationToughening and Asymmetry in Peeling of Heterogeneous Adhesives
Xia, S., Ponson, L., Ravichandran, G., & Bhattacharya, K. (2012) · Physical Review Letters · doi:10.1103/physrevlett.108.196101 · Cited by 147
Filler reinforcement of silicone rubber
Bueche, A. M. (1957) · Journal of Polymer Science · doi:10.1002/pol.1957.1202510902 · Cited by 108
Flaw‐Insensitive Hydrogels under Static and Cyclic Loads
Bai, R., Yang, J., Morelle, X., & Suo, Z. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201800883 · Cited by 81
Self-citation
Cited by
Strong tough hydrogels via the synergy of freeze-casting and salting out
Hua, M., Wu, S., Ma, Y., Zhao, Y., Chen, Z., Frenkel, I., Strzalka, J., Zhou, H., Zhu, X., & He, X. (2021) · Nature · doi:10.1038/s41586-021-03212-z · Cited by 1,519
Fracture, fatigue, and friction of polymers in which entanglements greatly outnumber cross-links
Kim, J., Zhang, G., Shi, M., & Suo, Z. (2021) · Science · doi:10.1126/science.abg6320 · Cited by 1,348
Self-citationSoft Materials by Design: Unconventional Polymer Networks Give Extreme Properties
Zhao, X., Chen, X., Yuk, H., Lin, S., Liu, X., & Parada, G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01088 · Cited by 1,161
Design principles for strong and tough hydrogels
Li, X., & Gong, J. P. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00672-3 · Cited by 809
Liu, J., Qu, S., Suo, Z., & Yang, W. (2021) · National Science Review · doi:10.1093/nsr/nwaa254 · Cited by 483
Self-citation
Metadata
- Authors
- Xiang, C., Wang, Z., Yang, C., Yao, X., Wang, Y., & Suo, Z.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 34
- Pages
- 7-16
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W2975536204
- Cited by
- 266
- References
- 42
- FWCI
- 15.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.