The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Nanostructural metallic materials: Structures and mechanical properties
Open accessAbstract
The trade-off of strength and ductility of metals has long plagued materials scientists. To resolve this issue, great efforts have been devoted over the past decades to developing a variety of technological pathways for effectively tailoring the microstructure of metallic materials. Here, we review the recent advanced nanostructure design strategies for purposely fabricating heterogeneous nanostructures in crystalline and non-crystalline metallic materials. Several representative structural approaches are introduced, including (1) hierarchical nanotwinned (HNT) structures, extreme grain refinement and dislocation architectures etc. for crystalline metals; (2) nanoglass structure for non-crystalline alloys, i.e. metallic glasses (MGs); and (3) a series of supra-nano-dual-phase (SNDP) nanostructures for composite alloys. The mechanical properties are further optimized by manipulating these nanostructures, especially coupling multiple advanced nanostructures into one material. Particularly, the newly developed SNDP nanostructures greatly enrich the nanostructure design strategies by utilizing supra-nano sized crystals and MGs, which exhibit unique size and synergistic effects. The origins of these gratifying properties are discussed in this review. Furthermore, based on a comprehensive understanding of microscopic mechanisms, a broad vision of strategies towards high strength and high ductility are proposed to promote future innovations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Mechanical behavior of amorphous alloys
SCHUH, C., HUFNAGEL, T., & RAMAMURTY, U. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.01.052 · Cited by 3,372
Ultrahigh Strength and High Electrical Conductivity in Copper
Lu, L., Shen, Y., Chen, X., Qian, L., & Lu, K. (2004) · Science · doi:10.1126/science.1092905 · Cited by 3,366
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
Revealing the Maximum Strength in Nanotwinned Copper
Lu, L., Chen, X., Huang, X., & Lu, K. (2009) · Science · doi:10.1126/science.1167641 · Cited by 2,110
A general-purpose machine learning framework for predicting properties of inorganic materials
Ward, L., Agrawal, A., Choudhary, A., & Wolverton, C. (2016) · npj Computational Materials · doi:10.1038/npjcompumats.2016.28 · Cited by 1,831
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Revealing Extraordinary Intrinsic Tensile Plasticity in Gradient Nano-Grained Copper
Fang, T., Li, W. L., Tao, N. R., & Lu, K. (2011) · Science · doi:10.1126/science.1200177 · Cited by 1,732
Machine-learning-assisted materials discovery using failed experiments
Raccuglia, P., Elbert, K. C., Adler, P. D. F., Falk, C., Wenny, M. B., Mollo, A., Zeller, M., Friedler, S. A., Schrier, J., & Norquist, A. J. (2016) · Nature · doi:10.1038/nature17439 · Cited by 1,727
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
Yang, T., Zhao, Y. L., Tong, Y., Jiao, Z. B., Wei, J., Cai, J. X., Han, X. D., Chen, D., Hu, A., Kai, J. J., et al. (2018) · Science · doi:10.1126/science.aas8815 · Cited by 1,684
Tuning element distribution, structure and properties by composition in high-entropy alloys
Ding, Q., Zhang, Y., Chen, X., Fu, X., Chen, D., Chen, S., Gu, L., Wei, F., Bei, H., Gao, Y., et al. (2019) · Nature · doi:10.1038/s41586-019-1617-1 · Cited by 1,614
Shear bands in metallic glasses
Greer, A. L., Cheng, Y. Q., & Ma, E. (2013) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2013.04.001 · Cited by 1,538
A Maximum in the Strength of Nanocrystalline Copper
Schiøtz, J., & Jacobsen, K. W. (2003) · Science · doi:10.1126/science.1086636 · Cited by 1,479
Metallic glasses as structural materials
ASHBY, M., & GREER, A. (2006) · Scripta Materialia · doi:10.1016/j.scriptamat.2005.09.051 · Cited by 1,472
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
Jiang, S., Wang, H., Wu, Y., Liu, X., Chen, H., Yao, M., Gault, B., Ponge, D., Raabe, D., Hirata, A., et al. (2017) · Nature · doi:10.1038/nature22032 · Cited by 1,441
Laplanche, G., Kostka, A., Reinhart, C., Hunfeld, J., Eggeler, G., & George, E. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.036 · Cited by 1,379
Extraordinary strain hardening by gradient structure
Wu, X., Jiang, P., Chen, L., Yuan, F., & Zhu, Y. T. (2014) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1324069111 · Cited by 1,315
Making strong nanomaterials ductile with gradients
Lu, K. (2014) · Science · doi:10.1126/science.1255940 · Cited by 1,173
Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals
Ma, E., & Zhu, T. (2017) · Materials Today · doi:10.1016/j.mattod.2017.02.003 · Cited by 1,132
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., & Shen, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.11.004 · Cited by 1,127
Additive manufacturing of ultrafine-grained high-strength titanium alloys
Zhang, D., Qiu, D., Gibson, M. A., Zheng, Y., Fraser, H. L., StJohn, D. H., & Easton, M. A. (2019) · Nature · doi:10.1038/s41586-019-1783-1 · Cited by 1,127
Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins
Wei, Y., Li, Y., Zhu, L., Liu, Y., Lei, X., Wang, G., Wu, Y., Mi, Z., Liu, J., Wang, H., et al. (2014) · Nature Communications · doi:10.1038/ncomms4580 · Cited by 1,109
Review on superior strength and enhanced ductility of metallic nanomaterials
Ovid’ko, I. A., Valiev, R. Z., & Zhu, Y. T. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.02.002 · Cited by 1,026
Zhao, Y. L., Yang, T., Tong, Y., Wang, J., Luan, J. H., Jiao, Z. B., Chen, D., Yang, Y., Hu, A., Liu, C. T., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.029 · Cited by 998
Grain boundary stability governs hardening and softening in extremely fine nanograined metals
Hu, J., Shi, Y. N., Sauvage, X., Sha, G., & Lu, K. (2017) · Science · doi:10.1126/science.aal5166 · Cited by 900
Extra strengthening and work hardening in gradient nanotwinned metals
Cheng, Z. Y., Zhou, H., Lu, Q., Gao, H., & Lu, L. (2018) · Science · doi:10.1126/science.aau1925 · Cited by 886
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Kim, S.-H., Kim, H., & Kim, N. J. (2015) · Nature · doi:10.1038/nature14144 · Cited by 830
Superplastic Extensibility of Nanocrystalline Copper at Room Temperature
Lu, L., Sui, M. L., & Lu, K. (2000) · Science · doi:10.1126/science.287.5457.1463 · Cited by 781
Jang, D., & Greer, J. R. (2010) · Nature Materials · doi:10.1038/nmat2622 · Cited by 722
Combinatorial search of thermoelastic shape-memory alloys with extremely small hysteresis width
Cui, J., Chu, Y. S., Famodu, O. O., Furuya, Y., Simpers, J. H., James, R. D., Ludwig, A., Thienhaus, S., Wuttig, M. R., Zhang, Z., et al. (2006) · Nature Materials · doi:10.1038/nmat1593 · Cited by 707
Dual-phase nanostructuring as a route to high-strength magnesium alloys
Wu, G., Chan, K.-C., Zhu, L., Sun, L., & Lu, J. (2017) · Nature · doi:10.1038/nature21691 · Cited by 672
Self-citationZhang, Z., Sheng, H., Wang, Z., Gludovatz, B., Zhang, Z., George, E. P., Yu, Q., Mao, S. X., & Ritchie, R. O. (2017) · Nature Communications · doi:10.1038/ncomms14390 · Cited by 664
Sun, Z., Tan, X., Tor, S. B., & Chua, C. K. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0018-5 · Cited by 627
Hautier, G., Fischer, C. C., Jain, A., Mueller, T., & Ceder, G. (2010) · Chemistry of Materials · doi:10.1021/cm100795d · Cited by 580
Gutiérrez‐Urrutia, I., & Raabe, D. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.07.018 · Cited by 538
Microstructural Control of Additively Manufactured Metallic Materials
Collins, P. C., Brice, D. A., Samimi, P., Ghamarian, I., & Fraser, H. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031816 · Cited by 461
Enhanced reversibility and unusual microstructure of a phase-transforming material
Song, Y., Chen, X., Dabade, V., Shield, T. W., & James, R. D. (2013) · Nature · doi:10.1038/nature12532 · Cited by 460
Zarnetta, R., Takahashi, R., Young, M. L., Savan, A., Furuya, Y., Thienhaus, S., Maaß, B., Rahim, M., Frenzel, J. A., Brunken, H., et al. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200902336 · Cited by 389
A low-cost hierarchical nanostructured beta-titanium alloy with high strength
Devaraj, A., Joshi, V. V., Srivastava, A., Manandhar, S., Moxson, V., Duz, V. A., & Lavender, C. (2016) · Nature Communications · doi:10.1038/ncomms11176 · Cited by 364
Zhang, L.-C., Jia, Z., Lyu, F., Liang, S.-X., & Lu, J. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100576 · Cited by 312
Self-citationLinear complexions: Confined chemical and structural states at dislocations
Kuzmina, M., Herbig, M., Ponge, D., Sandlöbes, S., & Raabe, D. (2015) · Science · doi:10.1126/science.aab2633 · Cited by 310
On strain hardening mechanism in gradient nanostructures
Li, J., Weng, G. J., Chen, S., & Wu, X. (2016) · International Journal of Plasticity · doi:10.1016/j.ijplas.2016.10.003 · Cited by 299
High‐Strength and High‐Ductility Nanostructured and Amorphous Metallic Materials
Kou, H., Lu, J., & Li, Y. (2014) · Advanced Materials · doi:10.1002/adma.201401595 · Cited by 283
Self-citationWang, M.-M., Tasan, C. C., Ponge, D., Dippel, A.-C., & Raabe, D. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.11.010 · Cited by 281
Probing topological protection using a designer surface plasmon structure.
Gao, F., Gao, Z., Shi, X., Yang, Z., Lin, X., Xu, H., Joannopoulos, J. D., Soljačić, M., Chen, H., Lu, L., et al. (2016) · Nature Communications · doi:10.1038/ncomms11619 · Cited by 268
Albe, K., Ritter, Y., & Şopu, D. (2013) · Mechanics of Materials · doi:10.1016/j.mechmat.2013.06.004 · Cited by 226
Lu, X., Zhang, X., Shi, M., Roters, F., Kang, G., & Raabe, D. (2019) · International Journal of Plasticity · doi:10.1016/j.ijplas.2018.09.007 · Cited by 204
Modeling of the plastic deformation of nanostructured materials with grain size gradient
Li, J., & Soh, A. K. (2012) · International Journal of Plasticity · doi:10.1016/j.ijplas.2012.06.004 · Cited by 201
Jia, Z., Duan, X., Qin, P., Zhang, W., Wang, W., Yang, C., Sun, H., Wang, S., & Zhang, L. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702258 · Cited by 201
Nanoscale precipitates as sustainable dislocation sources for enhanced ductility and high strength
Peng, S., Wei, Y., & Gao, H. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1914615117 · Cited by 201
Compelling Rejuvenated Catalytic Performance in Metallic Glasses
Liang, S., Jia, Z., Liu, Y., Zhang, W., Wang, W., Lü, J., & Zhang, L. (2018) · Advanced Materials · doi:10.1002/adma.201802764 · Cited by 194
Hierarchical nanostructured aluminum alloy with ultrahigh strength and large plasticity
Wu, G., Liu, C., Sun, L., Wang, Q., Sun, B., Han, B., Kai, J.-J., Luan, J., Liu, C. T., Cao, K., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-13087-4 · Cited by 192
Self-citationOn the exceptional damage-tolerance of gradient metallic materials
Cao, R., Yu, Q., Pan, J., Lin, Y., Sweet, A., Li, Y., & Ritchie, R. O. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.023 · Cited by 185
3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices
Kenel, C., Casati, N. P. M., & Dunand, D. C. (2019) · Nature Communications · doi:10.1038/s41467-019-08763-4 · Cited by 183
Jia, Z., Wang, Q., Sun, L., Wang, Q., Zhang, L., Wu, G., Luan, J., Jiao, Z., Wang, A., Liang, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807857 · Cited by 156
Self-citationThe α→ω and β→ω phase transformations in Ti–Fe alloys under high-pressure torsion
Kilmametov, A. R., Ivanisenko, Y., Mazilkin, A. A., Straumal, B. B., Сергеевна, Г. А., Fabrichnaya, O. B., Kriegel, M. J., Rafaja, D., & Hahn, H. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.051 · Cited by 148
Discovery of Intermetallic Compounds from Traditional to Machine-Learning Approaches
Oliynyk, A. O., & Mar, A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00490 · Cited by 143
Nanostructured solids – From nano-glasses to quantum transistors
Gleiter, H., Schimmel, T., & Hahn, H. (2014) · Nano Today · doi:10.1016/j.nantod.2014.02.008 · Cited by 136
Nanometallic Glasses: Size Reduction Brings Ductility, Surface State Drives Its Extent
Chen, D., Jang, D., Guan, K. M., An, Q., Goddard, W. A., & Greer, J. R. (2013) · Nano Letters · doi:10.1021/nl402384r · Cited by 125
Zhu, L., Ruan, H., Chen, A., Guo, X., & Lü, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.035 · Cited by 123
Zhang, J.-L., Raabe, D., & Taşan, C. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.09.026 · Cited by 121
Rosenbrock, C. W., Homer, E. R., Cśanyi, G., & Hart, G. L. W. (2017) · npj Computational Materials · doi:10.1038/s41524-017-0027-x · Cited by 120
Hafeez, N., Liu, S., Lu, E., Wang, L., Liu, R., Lü, W., & Zhang, L. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.03.138 · Cited by 109
Machine-learning the configurational energy of multicomponent crystalline solids
Natarajan, A. R., & der Ven, A. V. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0110-y · Cited by 84
Chen, N., Shi, X., Witte, R., Nakayama, K. S., Ohmura, K., Wu, H., Takeuchi, A., Hahn, H., Esashi, M., Gleiter, H., et al. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20153h · Cited by 67
Extracting knowledge from molecular mechanics simulations of grain boundaries using machine learning
Gomberg, J. A., Medford, A. J., & Kalidindi, S. R. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.05.009 · Cited by 60
Sun, L., Li, D., Zhu, L., Ruan, H., & Lü, J. (2020) · International Journal of Plasticity · doi:10.1016/j.ijplas.2020.102685 · Cited by 38
Self-citation
Cited by
About metastable cellular structure in additively manufactured austenitic stainless steels
Kong, D., Dong, C., Wei, S., Ni, X., Zhang, L., Li, R., Wang, L., Man, C., & Li, X. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101804 · Cited by 528
Recent progress in gradient-structured metals and alloys
Ji, W., Zhou, R., Vivegananthan, P., See Wu, M., Gao, H., & Zhou, K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101194 · Cited by 313
Heterostructured stainless steel: Properties, current trends, and future perspectives
Romero-Resendiz, L., El-Tahawy, M., Zhang, T., Rossi, M. C., Marulanda-Cardona, D. M., Yang, T., Amigó-Borrás, V., Huang, Y., Mirzadeh, H., Beyerlein, I. J., et al. (2022) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100691 · Cited by 278
Metadata
- Authors
- Sun, L. G., Wu, G., Wang, Q., & Lu, J.
- Venue
- Materials Today
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 38
- Pages
- 114-135
- ISSN
- 1369-7021 (ISSN-L)
- OpenAlex
- W3028897142
- Cited by
- 326
- References
- 71
- FWCI
- 13.80
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.