The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
The relative contributions of different skin layers to the mechanical behavior of human skin in vivo using suction experiments
Abstract
Although the mechanical behavior of the top layer of the skin, the epidermis, is an important consideration in several clinical and cosmetic applications, there are few reported studies on this layer. The in vivo mechanical behavior of the upper skin layer (here defined as epidermis and papillar dermis) was characterized using a combined experimental and modeling approach. The work was based on the hypothesis that experiments with different length scales represent the mechanical behavior of different skin layers. Suction measurements with aperture diameters of 1, 2 and 6 mm were combined with ultrasound and optical coherence tomography to study the deformation of the skin layers. The experiments were simulated for small displacements with a two-layered finite element model representing the upper layer and the reticular dermis. An identification method compared the experimental and numerical results to identify the material parameters of the model. For one subject the whole parameter estimation procedure was completed, leading to a stiffness of C(10,ul) = 0.11 kPa for the top-layer and C(10,rd) = 0.16 MPa for the reticular dermis. This unexpected, extreme stiffness ratio of the material parameters let to convergence problems of the finite element software for most of the individuals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Huang, D., Swanson, E. A., Lin, C. P., Schuman, J. S., Stinson, W. G., Chang, W., Hee, M. R., Flotte, T., Gregory, K., Puliafito, C. A., et al. (1991) · Science · doi:10.1126/science.1957169 · Cited by 13,788
Optical coherence tomography (OCT): a review
Schmitt, J. M. (1999) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/2944.796348 · Cited by 1,188
Optimization Toolbox User's Guide
Coleman, T. F., Branch, M. A., & Grace, A. (1998) · Cited by 848
Mechanical properties and Young's modulus of human skin in vivo
Agache, P. G., Monneur, C., Leveque, J. L., & De Rigal, J. (1980) · Archives of Dermatological Research · doi:10.1007/bf00406415 · Cited by 741
Optical Coherence Tomography: Technology and Applications
(2008) · Biological and Medical Physics, Biomedical Engineering · doi:10.1007/978-3-540-77550-8 · Cited by 706
Tearney, G. J., Brezinski, M. E., Bouma, B. E., Hee, M. R., Southern, J. F., & Fujimoto, J. G. (1995) · Optics Letters · doi:10.1364/ol.20.002258 · Cited by 562
Handbook of Non-Invasive Methods and the Skin
(2006) · CRC Press eBooks · doi:10.3109/9781420003307 · Cited by 460
Physiology, biochemistry, and molecular biology of the skin
Goldsmith, L. A. (1991) · Oxford University Press eBooks · Cited by 448
A numerical‐experimental method to characterize the non‐linear mechanical behaviour of human skin
Hendriks, F. M., Brokken, D., Van Eemeren, J. T. W. M., Oomens, C. W. J., Baaijens, F. P. T., & Horsten, J. B. A. M. (2003) · Skin Research and Technology · doi:10.1034/j.1600-0846.2003.00019.x · Cited by 347
Self-citationNeerken, S., Lucassen, G. W., Bisschop, M. A., Lenderink, E., & Nuijs, T. (. M. ). (2004) · Journal of Biomedical Optics · doi:10.1117/1.1645795 · Cited by 216
Cited by
Nanotechnology and the transdermal routeA state of the art review and critical appraisal
Cevc, G., & Vierl, U. (2010) · Journal of Controlled Release · doi:10.1016/j.jconrel.2009.10.016 · Cited by 560
Skin mechanical properties and modeling: A review
Joodaki, H., & Panzer, M. B. (2018) · Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine · doi:10.1177/0954411918759801 · Cited by 480
Advancements in nanofibers for wound dressing: A review
Ambekar, R. S., & Kandasubramanian, B. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.05.020 · Cited by 447
Yu, Y.-Q., Yang, X., Wu, X.-F., & Fan, Y.-B. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.646554 · Cited by 441
Non-Fourier analysis of skin biothermomechanics
Xu, F., Seffen, K. A., & Lu, T. J. (2008) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2007.10.024 · Cited by 373
Metadata
- Authors
- Hendriks, F. M., Brokken, D., Oomens, C. W. J., Bader, D. L., & Baaijens, F. P. T.
- Venue
- Medical Engineering & Physics
- Publisher
- IOP Publishing
- Published
- 2005-08-11
- Volume
- 28
- Issue
- 3
- Pages
- 259-266
- ISSN
- 1350-4533 (ISSN-L)
- 1873-4030
- OpenAlex
- W2143256576
- Cited by
- 338
- References
- 16
- FWCI
- 6.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The relative contributions of different skin layers to the mechanical behavior of human skin in vivo using suction experiments. https://app.cochat.ai/papers/10.1016/j.medengphy.2005.07.001
- The paper
- Hendriks, F. M., Brokken, D., Oomens, C. W. J., Bader, D. L., & Baaijens, F. P. T. (2006). The relative contributions of different skin layers to the mechanical behavior of human skin in vivo using suction experiments. Medical Engineering & Physics. https://doi.org/10.1016/j.medengphy.2005.07.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.