The DOI matches its Crossref record; 96 of the 96 references it cites were found in a registry or an index.
Perspective on 3D printing of separation membranes and comparison to related unconventional fabrication techniques
Open accessAbstract
Additive manufacturing, likewise known as 3-dimensional (3D) printing and rapid prototyping, has the ability to create almost any geometrically complex shape or feature in a range of materials across different scales. It has found its applications in various areas, such as medicine (bioprinting), art, manufacturing and engineering. On the other hand, its use in separation membrane engineering is relatively new. The use of additive manufacturing techniques could provide more control towards the design of separation membrane systems and offers novel membrane preparation techniques that are able to produce membranes of different shapes, types and designs which cannot be made using conventional techniques such as phase inversion or sintering. Here we provide key background information on 3D printing technologies and applications in membrane engineering; a discussion of the potential and limitations of current 3D printing technologies for membrane engineering and future aspects of the technology. Due to the potential benefits of 3D printing in membrane manufacturing, in particular the unprecedented control over membrane architecture the technique could allow, the use of 3D printing in membrane systems should see significant growth in the near future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Honeycomb Carbon: A Review of Graphene
Allen, M. J., Tung, V. C., & Kaner, R. B. (2010) · Chemical Reviews · doi:10.1021/cr900070d · Cited by 6,998
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Inkjet Printing—Process and Its Applications
Singh, M., Haverinen, H. M., Dhagat, P., & Jabbour, G. E. (2010) · Advanced Materials · doi:10.1002/adma.200901141 · Cited by 2,375
A review on electrospinning design and nanofibre assemblies
Teo, W. E., & Ramakrishna, S. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/14/r01 · Cited by 2,289
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Imprint Lithography with 25-Nanometer Resolution
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Science · doi:10.1126/science.272.5258.85 · Cited by 2,277
Cundy, C. S., & Cox, P. A. (2003) · Chemical Reviews · doi:10.1021/cr020060i · Cited by 2,126
Function-led design of new porous materials
Slater, A. G., & Cooper, A. I. (2015) · Science · doi:10.1126/science.aaa8075 · Cited by 1,663
Chemical vapour deposition of coatings
Choy, K. (2003) · Progress in Materials Science · doi:10.1016/s0079-6425(01)00009-3 · Cited by 1,655
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Transfer printing by kinetic control of adhesion to an elastomeric stamp
Meitl, M. A., Zhu, Z.-T., Kumar, V., Lee, K. J., Feng, X., Huang, Y. Y., Adesida, I., Nuzzo, R. G., & Rogers, J. A. (2006) · Nature Materials · doi:10.1038/nmat1532 · Cited by 1,548
High-resolution electrohydrodynamic jet printing
Park, J.-U., Hardy, M., Kang, S. J., Barton, K., Adair, K., Mukhopadhyay, D. K., Lee, C. Y., Strano, M. S., Alleyne, A. G., Georgiadis, J. G., et al. (2007) · Nature Materials · doi:10.1038/nmat1974 · Cited by 1,492
Anti-reflective coatings: A critical, in-depth review
Raut, H. K., Ganesh, V. A., Nair, A. S., & Ramakrishna, S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01297e · Cited by 1,463
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Big returns from small fibers: A review of polymer/carbon nanotube composites
Breuer, O., & Sundararaj, U. (2004) · Polymer Composites · doi:10.1002/pc.20058 · Cited by 1,246
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Additive manufacturing of polymer-derived ceramics
Eckel, Z. C., Zhou, C., Martin, J. H., Jacobsen, A. J., Carter, W. B., & Schaedler, T. A. (2016) · Science · doi:10.1126/science.aad2688 · Cited by 1,106
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
A recent progress in thin film composite membrane: A review
Lau, W. J., Ismail, A. F., Misdan, N., & Kassim, M. A. (2011) · Desalination · doi:10.1016/j.desal.2011.04.004 · Cited by 1,012
Electrospraying route to nanotechnology: An overview
Jaworek, A., & Sobczyk, A. T. (2008) · Journal of Electrostatics · doi:10.1016/j.elstat.2007.10.001 · Cited by 963
Dubey, A. K., & Yadava, V. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.10.017 · Cited by 888
Nguyen, D. D., Tai, N.-H., Lee, S.-B., & Kuo, W.-S. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21848h · Cited by 800
A review of rapid prototyping techniques for tissue engineering purposes
Peltola, S. M., Melchels, F. P. W., Grijpma, D. W., & Kellomäki, M. (2008) · Annals of Medicine · doi:10.1080/07853890701881788 · Cited by 751
Material Incress Manufacturing by Rapid Prototyping Techniques
Kruth, J. P. (1991) · CIRP Annals · doi:10.1016/s0007-8506(07)61136-6 · Cited by 657
Electrodeposition of Alloys: PRINCIPLES and PRACTICE
(1963) · Electrodeposition of Alloys · doi:10.1016/b978-1-4831-9807-1.50001-5 · Cited by 655
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Farahani, R. D., Dubé, M., & Therriault, D. (2016) · Advanced Materials · doi:10.1002/adma.201506215 · Cited by 604
Review of sol-gel thin film formation
Brinker, C. J., Hurd, A. J., Schunk, P., Frye, G. C., & Ashley, C. S. (1992) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(05)80653-2 · Cited by 587
Dewetting of conducting polymer inkjet droplets on patterned surfaces
Wang, J. Z., Zheng, Z. H., Li, H. W., Huck, W. T. S., & Sirringhaus, H. (2004) · Nature Materials · doi:10.1038/nmat1073 · Cited by 583
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples
Es-Said, O. S., Foyos, J., Noorani, R., Mendelson, M., Marloth, R., & Pregger, B. A. (2000) · Materials and Manufacturing Processes · doi:10.1080/10426910008912976 · Cited by 577
Downscaling of self-aligned, all-printed polymer thin-film transistors
Noh, Y.-Y., Zhao, N., Caironi, M., & Sirringhaus, H. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.365 · Cited by 549
High-mobility ultrathin semiconducting films prepared by spin coating
Mitzi, D. B., Kosbar, L. L., Murray, C. E., Copel, M., & Afzali, A. (2004) · Nature · doi:10.1038/nature02389 · Cited by 531
Recent developments in reverse osmosis desalination membranes
Li, D., & Wang, H. (2010) · Journal of Materials Chemistry · doi:10.1039/b924553g · Cited by 526
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Controllable Printing Droplets for High‐Resolution Patterns
Kuang, M., Wang, L., & Song, Y. (2014) · Advanced Materials · doi:10.1002/adma.201305416 · Cited by 479
Superabsorbent hydrogel composites and nanocomposites: A review
Kabiri, K., Omidian, H., Zohuriaan‐Mehr, M. J., & Doroudiani, S. (2011) · Polymer Composites · doi:10.1002/pc.21046 · Cited by 479
Kong, B.-S., Geng, J., & Jung, H.-T. (2009) · Chemical Communications · doi:10.1039/b821920f · Cited by 425
A review of ultrashort pulsed laser ablation of materials
Shirk, M. D., & Molian, P. A. (1998) · Journal of Laser Applications · doi:10.2351/1.521827 · Cited by 416
Fedorovich, N. E., De Wijn, J. R., Verbout, A. J., Alblas, J., & Dhert, W. J. A. (2008) · Tissue Engineering Part A · doi:10.1089/ten.a.2007.0158 · Cited by 410
Biomimetic membranes: A review
Shen, Y.-X., Saboe, P. O., Sines, I. T., Erbakan, M., & Kumar, M. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.12.019 · Cited by 380
3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
Kim, K., Zhu, W., Qu, X., Aaronson, C., McCall, W. R., Chen, S., & Sirbuly, D. J. (2014) · ACS Nano · doi:10.1021/nn503268f · Cited by 374
Patterning of controllable surface wettability for printing techniques
Tian, D., Song, Y., & Jiang, L. (2013) · Chemical Society Reviews · doi:10.1039/c3cs35501b · Cited by 372
The rapid prototyping technologies
Upcraft, S., & Fletcher, R. (2003) · Assembly Automation · doi:10.1108/01445150310698634 · Cited by 367
Contra-diffusion synthesis of ZIF-8 films on a polymer substrate
Yao, J., Dong, D., Li, D., He, L., Xu, G., & Wang, H. (2011) · Chemical Communications · doi:10.1039/c0cc04734a · Cited by 358
Desalination by biomimetic aquaporin membranes: Review of status and prospects
Tang, C. Y., Zhao, Y., Wang, R., et al. (2012) · Desalination · doi:10.1016/j.desal.2012.07.007 · Cited by 325
Additive manufacturing of multi-directional preforms for composites: opportunities and challenges
Quan, Z., Wu, A., Keefe, M., Qin, X., Yu, J., Suhr, J., Byun, J.-H., Kim, B.-S., & Chou, T.-W. (2015) · Materials Today · doi:10.1016/j.mattod.2015.05.001 · Cited by 324
Two-photon lithography of nanorods in SU-8 photoresist
Juodkazis, S., Mizeikis, V., Seet, K. K., Miwa, M., & Misawa, H. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/6/039 · Cited by 309
Lithography‐Free, Self‐Aligned Inkjet Printing with Sub‐Hundred‐Nanometer Resolution
Sele, C. W., von Werne, T., Friend, R. H., & Sirringhaus, H. (2005) · Advanced Materials · doi:10.1002/adma.200401285 · Cited by 304
Pfister, A., Landers, R., Laib, A., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.10807 · Cited by 284
The potential to enhance membrane module design with 3D printing technology
Lee, J.-Y., Tan, W. S., An, J., Chua, C. K., Tang, C. Y., Fane, A. G., & Chong, T. H. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.11.008 · Cited by 283
Xiang, Y., Lu, S., & Jiang, S. P. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35048c · Cited by 277
Dispensing nano–pico droplets and liquid patterning by pyroelectrodynamic shooting
Ferraro, P., Coppola, S., Grilli, S., Paturzo, M., & Vespini, V. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.82 · Cited by 271
Ultrathin, Multilayered Polyelectrolyte Films as Nanofiltration Membranes
Stanton, B. W., Harris, J. J., Miller, M. D., & Bruening, M. L. (2003) · Langmuir · doi:10.1021/la034603a · Cited by 268
Landers, R., & Mülhaupt, R. (2000) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20001001)282:1<17::aid-mame17>3.0.co;2-8 · Cited by 261
Wu, H., Cheng, Y., Liu, W., He, R., Zhou, M., Wu, S., Song, X., & Chen, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.08.024 · Cited by 248
Fabrication of low cost soft tissue prostheses with the desktop 3D printer
He, Y., Xue, G.-H., & Fu, J.-Z. (2014) · Scientific Reports · doi:10.1038/srep06973 · Cited by 243
Kim, G. D., & Oh, Y. T. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem724 · Cited by 238
Engineering nanoscale roughness on hydrophobic surface—preliminary assessment of fouling behaviour
Zhang, H., Lamb, R., & Lewis, J. (2005) · Science and Technology of Advanced Materials · doi:10.1016/j.stam.2005.03.003 · Cited by 227
Jeong, J. W., Yang, S. R., Hur, Y. H., Kim, S. W., Baek, K. M., Yim, S., Jang, H.-I., Park, J. H., Lee, S. Y., Park, C.-O., et al. (2014) · Nature Communications · doi:10.1038/ncomms6387 · Cited by 225
Economic evaluation of stand-alone solar powered membrane distillation systems
Saffarini, R. B., Summers, E. K., Arafat, H. A., & Lienhard, J. H. (2012) · Desalination · doi:10.1016/j.desal.2012.05.017 · Cited by 223
Novel spacers for mass transfer enhancement in membrane separations
Li, F., Meindersma, W., de Haan, A. B., & Reith, T. (2005) · Journal of Membrane Science · doi:10.1016/j.memsci.2004.12.019 · Cited by 204
The role of nano-roughness in antifouling
Scardino, A. J., Zhang, H., Cookson, D. J., Lamb, R. N., & Nys, R. D. (2009) · Biofouling · doi:10.1080/08927010903165936 · Cited by 203
Biomimetic and bioinspired membranes: Preparation and application
Zhao, J., Zhao, X., Jiang, Z., Li, Z., Fan, X., Zhu, J., Wu, H., Su, Y., Yang, D., Pan, F., et al. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.06.001 · Cited by 200
Kostakis, V., Niaros, V., & Giotitsas, C. (2015) · Telematics and Informatics · doi:10.1016/j.tele.2014.05.001 · Cited by 187
Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication
Ko, S. H., Chung, J., Hotz, N., Nam, K. H., & Grigoropoulos, C. P. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/12/125010 · Cited by 183
3D fine scale ceramic components formed by ink-jet prototyping process
Noguera, R., Lejeune, M., & Chartier, T. (2005) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.03.223 · Cited by 176
Atomic inner-shell laser at 1.5-ångström wavelength pumped by an X-ray free-electron laser
Yoneda, H., Inubushi, Y., Nagamine, K., Michine, Y., Ohashi, H., Yumoto, H., Yamauchi, K., Mimura, H., Kitamura, H., Katayama, T., et al. (2015) · Nature · doi:10.1038/nature14894 · Cited by 175
3D printed porous media columns with fine control of column packing morphology
Fee, C., Nawada, S., & Dimartino, S. (2014) · Journal of Chromatography A · doi:10.1016/j.chroma.2014.01.043 · Cited by 164
Print your own membrane: direct rapid prototyping of polydimethylsiloxane
Femmer, T., Kuehne, A. J. C., & Wessling, M. (2014) · Lab on a Chip · doi:10.1039/c4lc00320a · Cited by 161
Hybrid Si Microwire and Planar Solar Cells: Passivation and Characterization
Kim, D. R., Lee, C. H., Rao, P. M., Cho, I. S., & Zheng, X. (2011) · Nano Letters · doi:10.1021/nl2009636 · Cited by 154
Use of nanoimprinted surface patterns to mitigate colloidal deposition on ultrafiltration membranes
Maruf, S. H., Wang, L., Greenberg, A., Pellegrino, J., & Ding, Y.-F. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.10.059 · Cited by 143
Choi, C., & Kim, C. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/21/007 · Cited by 140
Electrospinning technology applied in zeolitic imidazolate framework membrane synthesis
Fan, L., Xue, M., Kang, Z., Li, H., & Qiu, S. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm35401b · Cited by 140
Focusing capillary jets close to the continuum limit
Gañán‐Calvo, A. M., González‐Prieto, R., Chueca, P. R., Herrada, M. A., & Flores, M. V. (2007) · Nature Physics · doi:10.1038/nphys710 · Cited by 135
Fabrication and characterization of a surface-patterned thin film composite membrane
Maruf, S. H., Greenberg, A. R., Pellegrino, J., & Ding, Y. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2013.10.017 · Cited by 118
Initiator-Integrated 3D Printing Enables the Formation of Complex Metallic Architectures
Wang, X., Guo, Q., Cai, X., Zhou, S., Kobe, B. A., & Yang, J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4050822 · Cited by 111
i3DP, a robust 3D printing approach enabling genetic post-printing surface modification
Wang, X., Cai, X., Guo, Q., Zhang, T., Kobe, B. A., & Yang, J. (2013) · Chemical Communications · doi:10.1039/c3cc45817b · Cited by 106
Printing nanostructured carbon for energy storage and conversion applications
Lawes, S., Riese, A., Sun, Q., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.008 · Cited by 105
Palmstrom, A. F., Santra, P. K., & Bent, S. F. (2015) · Nanoscale · doi:10.1039/c5nr02080h · Cited by 98
Combined helium ion beam and nanoimprint lithography attains 4 nm half-pitch dense patterns
Li, W., Wu, W., & Williams, R. S. (2012) · Journal of Vacuum Science & Technology B Nanotechnology and Microelectronics Materials Processing Measurement and Phenomena · doi:10.1116/1.4758768 · Cited by 97
Dang, F., Shinohara, S., Tabata, O., Yamaoka, Y., Kurokawa, M., Shinohara, Y., Ishikawa, M., & Baba, Y. (2005) · Lab on a Chip · doi:10.1039/b417398h · Cited by 92
A New Open Source 3D-Printable Mobile Robotic Platform for Education
González-Gómez, J., Valero, A., Prieto-Moreno, A., & Abderrahim, M. (2012) · Springer eBooks · doi:10.1007/978-3-642-27482-4_8 · Cited by 86
Surface patterning of polymeric membranes and its effect on antifouling characteristics
Ding, Y., Maruf, S. H., Aghajani, M., & Greenberg, A. R. (2016) · Separation Science and Technology · doi:10.1080/01496395.2016.1201115 · Cited by 83
Quick, A. S., Fischer, J., Richter, B., Pauloehrl, T., Trouillet, V., Wegener, M., & Barner‐Kowollik, C. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200796 · Cited by 81
Haberstroh, K., Ritter, K., Kuschnierz, J., Bormann, K., Kaps, C., Carvalho, C., Mülhaupt, R., Sittinger, M., & Gellrich, N. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31611 · Cited by 80
Influence of chemical coating combined with nanopatterning on alginate fouling during nanofiltration
Weinman, S. T., & Husson, S. M. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.04.025 · Cited by 67
Towards a general understanding of hydrothermal polymerization of polyimides
Baumgartner, B., Puchberger, M., & Unterlass, M. M. (2015) · Polymer Chemistry · doi:10.1039/c5py00231a · Cited by 56
Guo, Q., Cai, X., Wang, X., & Yang, J. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21415j · Cited by 52
Biologically Responsive Biomaterials for Tissue Engineering
Antoniac, I. (2012) · Springer series in biomaterials science and engineering · doi:10.1007/978-1-4614-4328-5 · Cited by 48
Additive Manufacturing in Fluid Process Engineering
Femmer, T., Flack, I., & Weßling, M. (2016) · Chemie Ingenieur Technik · doi:10.1002/cite.201500086 · Cited by 46
Niesler, F., & Hermatschweiler, M. (2015) · Laser Technik Journal · doi:10.1002/latj.201500019 · Cited by 43
Water permeation in carbon nanotube membranes
Mattia, D., Lee, K. P., & Calabrò, F. (2014) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2014.01.006 · Cited by 30
Self-citationOpen Source Powder based Rapid Prototyping Machine for Ceramics
Budding, A., Vaneker, T., & Winnubst, L. A. J. A. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.03.101 · Cited by 17
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
An Overview on 3D Printing Technology: Technological, Materials, and Applications
Shahrubudin, N., Lee, T. C., & Ramlan, R. (2019) · Procedia Manufacturing · doi:10.1016/j.promfg.2019.06.089 · Cited by 2,050
Nunes, S. P., Culfaz-Emecen, P. Z., Ramon, G. Z., Visser, T., Koops, G. H., Jin, W., & Ulbricht, M. (2020) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117761 · Cited by 605
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
Metadata
- Authors
- Low, Z.-X., Chua, Y. T., Ray, B. M., Mattia, D., Metcalfe, I. S., & Patterson, D. A.
- Venue
- Journal of Membrane Science
- Publisher
- Elsevier BV
- Published
- 2017-02
- Volume
- 523
- Pages
- 596-613
- ISSN
- 0376-7388 (ISSN-L)
- OpenAlex
- W2528321021
- Cited by
- 465
- References
- 96
- FWCI
- 17.93
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.