The DOI matches its Crossref record; 128 of the 128 references it cites were found in a registry or an index.
Porous ceramics: Light in weight but heavy in energy and environment technologies
Open accessAbstract
Benefitting from the combined properties of intrinsic ceramic materials and advanced porous configuration, lightweight porous ceramics with porosity ranging from 2.3 to 99% and pore size distribution within 3 nm - 3 mm exhibit low density, large specific surface area, high toughness, strong thermal shock resistance, good thermal insulation capability, excellent high temperature stability, and low dielectric constant, which are barely offered by metal, polymer or even their dense counterpart. This unique set of features endow porous ceramics an indispensable role in the future development of sustainable energy and environmental applications. To be successfully applied in these applications, precise selection of the type of ceramics and creation of their detailed structural features of the pores are the most important stages that require intensive investigations and comprehensive understanding. For a given ceramic, the synthesis process is critical for achieving the desired pore configuration and geometry which eventually determines the final properties of the products, including both the usual mechanical properties and other advanced functionalities. In this review, we will first focus on the fabrication processes that determine the pore structures and geometries. Four mainstream fabrication methods: partial sintering, replica template, sacrificial template, and direct foaming will be discussed, in addition to the additive manufacturing technique which has emerged as a promising process for the direct fabrication of porous ceramics components. Each approach demonstrates its unique suitability for a specific range of materials, porosity, pore size, pore connectivity, and pore distribution. The principles and challenges of each synthesis strategies will be summarised and discussed, the progress that can be made to meet the requirement of advanced applications has been clarified. We then focus on the properties derived from different pore features. The superior damage tolerance and thermal insulation capability of porous ceramics, as compared with their dense counterpart, are presented. Thirdly, the great potentials of these interesting porous ceramics for the energy- and environmental-based applications, including filters, catalyst support, energy storage and conversion components, energy harvesting devices, and insulators are highlighted, in association with the criteria and demands for manufacturing processes. It is envisaged that this review will provide a guidance in the manufacture of advanced porous ceramics with desired pore structures and properties tailored for specific applications. Finally, we will demonstrate how these porous ceramics could contribute to the development of current and future energy and environment technologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Titanium Dioxide Nanomaterials: Synthesis, Properties, Modifications, and Applications
Chen, X., & Mao, S. S. (2007) · Chemical Reviews · doi:10.1021/cr0500535 · Cited by 10,688
Téllez, A. F. (2006) · conference · Cited by 5,352
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Processing Routes to Macroporous Ceramics: A Review
Studart, A. R., Gonzenbach, U. T., Tervoort, E., & Gauckler, L. J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01044.x · Cited by 1,839
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Freeze‐Casting of Porous Ceramics: A Review of Current Achievements and Issues
Deville, S. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700270 · Cited by 1,260
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Thermal conductivity of dense and porous yttria-stabilized zirconia
Schlichting, K. W., Padture, N. P., & Klemens, P. G. (2001) · Journal of Materials Science · doi:10.1023/a:1017970924312 · Cited by 824
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman, J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 810
Macro-porous ceramics: processing and properties
Ohji, T., & Fukushima, M. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000006 · Cited by 689
Electromagnetic properties of Si–C–N based ceramics and composites
Yin, X., Kong, L., Zhang, L., Cheng, L., Travitzky, N., & Greil, P. (2014) · International Materials Reviews · doi:10.1179/1743280414y.0000000037 · Cited by 622
Recent progress in synthesis, properties and potential applications of SiC nanomaterials
Wu, R., Zhou, K., Yue, C. Y., Wei, J., & Pan, Y. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.003 · Cited by 578
Processing and properties of advanced porous ceramics: An application based review
Hammel, E. C., Ighodaro, O. L.-R., & Okoli, O. I. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.06.095 · Cited by 563
Recent trends of ceramic humidity sensors development: A review
Blank, T. A., Eksperiandova, L. P., & Belikov, K. N. (2016) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.01.015 · Cited by 532
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
Cox, S. C., Thornby, J. A., Gibbons, G. J., Williams, M. A., & Mallick, K. K. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.11.024 · Cited by 452
Additive manufacturing of ceramics for dental applications: A review
Galante, R., Figueiredo-Pina, C. G., & Serro, A. P. (2019) · Dental Materials · doi:10.1016/j.dental.2019.02.026 · Cited by 441
Solar Thermochemical CO2 Splitting Utilizing a Reticulated Porous Ceria Redox System
Furler, P., Scheffe, J., Gorbar, M., Moes, L., Vogt, U., & Steinfeld, A. (2012) · Energy & Fuels · doi:10.1021/ef3013757 · Cited by 385
Direct selective laser sintering and melting of ceramics: a review
Sing, S. L., Yeong, W. Y., Wiria, F. E., Tay, B. Y., Zhao, Z., Zhao, L., Tian, Z., & Yang, S. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0178 · Cited by 359
Fundamentals and Applications of Structured Ceramic Foam Catalysts
Twigg, M. V., & Richardson, J. T. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie061122o · Cited by 348
Silver nanoparticle-decorated porous ceramic composite for water treatment
Lv, Y., Liu, H., Wang, Z., Liu, S., Hao, L., Sang, Y., Liu, D., Wang, J., & Boughton, R. I. (2009) · Journal of Membrane Science · doi:10.1016/j.memsci.2009.01.007 · Cited by 322
Bae, K., Jang, D. Y., Choi, H. J., Kim, D., Hong, J., Kim, B.-K., Lee, J.-H., Son, J., & Shim, J. H. (2017) · Nature Communications · doi:10.1038/ncomms14553 · Cited by 314
Zhu, M., Ji, R., Li, Z., Wang, H., Liu, L., & Zhang, Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.183 · Cited by 302
Farzadi, A., Solati-Hashjin, M., Asadi-Eydivand, M., & Abu Osman, N. A. (2014) · PLoS ONE · doi:10.1371/journal.pone.0108252 · Cited by 284
Zhang, Y., Xie, M., Roscow, J. I., Bao, Y., Zhou, K., Zhang, D., & Bowen, C. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00967d · Cited by 278
Architectural Control of Freeze‐Cast Ceramics Through Additives and Templating
Munch, E., Saiz, E., Tomsia, A. P., & Deville, S. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03087.x · Cited by 274
Heidenreich, S. (2013) · Fuel · doi:10.1016/j.fuel.2012.07.059 · Cited by 264
Thermal conductivity of highly porous zirconia
Nait-Ali, B., Haberko, K., Vesteghem, H., Absi, J., & Smith, D. S. (2006) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.11.011 · Cited by 262
A review on fabricating tissue scaffolds using vat photopolymerization
Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 253
Liu, R., Xu, T., & Wang, C.-A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2015.10.148 · Cited by 248
Thermal conductivity of porous alumina ceramics prepared using starch as a pore-forming agent
Živcová, Z., Gregorová, E., Pabst, W., Smith, D. S., Michot, A., & Poulier, C. (2009) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.06.018 · Cited by 244
Dou, L., Zhang, X., Cheng, X., Ma, Z., Wang, X., Si, Y., Yu, J., & Ding, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b10018 · Cited by 230
Fabrication of ceramic components with hierarchical porosity
Colombo, P., Vakifahmetoglu, C., & Costacurta, S. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4708-9 · Cited by 227
Kumar, A., Mandal, S., Barui, S., Vasireddi, R., Gbureck, U., Gelinsky, M., & Basu, B. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2016.01.001 · Cited by 225
A review of solid oxide fuel cell component fabrication methods toward lowering temperature
Zakaria, Z., Mat, Z. A., Hassan, S. H. A., & Kar, Y. B. (2019) · International Journal of Energy Research · doi:10.1002/er.4907 · Cited by 213
Young’s modulus and volume porosity relationships for additive manufacturing applications
Choren, J. A., Heinrich, S. M., & Silver-Thorn, M. B. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7237-5 · Cited by 208
Tailoring the Microstructure of Particle-Stabilized Wet Foams
Gonzenbach, U. T., Studart, A. R., Tervoort, E., & Gauckler, L. J. (2007) · Langmuir · doi:10.1021/la0624844 · Cited by 195
Chen, R., Wang, C., Huang, Y., Ma, L., & Lin, W. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01957.x · Cited by 185
Processing of Particle‐Stabilized Wet Foams Into Porous Ceramics
Gonzenbach, U. T., Studart, A. R., Steinlin, D. P., et al. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01907.x · Cited by 183
Review of additive manufacturing methods for high-performance ceramic materials
Wang, J.-C., Dommati, H., & Hsieh, S.-J. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03669-3 · Cited by 181
Meng, L., Zhang, X., Tang, Y., Su, K., & Kong, J. (2015) · Scientific Reports · doi:10.1038/srep07910 · Cited by 180
Tarafder, S., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Biomaterials Science · doi:10.1039/c3bm60132c · Cited by 179
Jin, H.-Q., Yao, X.-L., Fan, L.-W., Xu, X., & Yu, Z.-T. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.08.103 · Cited by 171
CO oxidation over structured carriers: A comparison of ceramic foams, honeycombs and beads
Patcas, F. C., Garrido, G. I., & Kraushaar-Czarnetzki, B. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2007.04.039 · Cited by 162
Kolan, K. C. R., Leu, M. C., Hilmas, G. E., Brown, R. F., & Velez, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025004 · Cited by 161
Understanding the effect of porosity on the polarisation-field response of ferroelectric materials
Zhang, Y., Roscow, J., Lewis, R., Khanbareh, H., Topolov, V. Y., Xie, M., & Bowen, C. R. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.05.007 · Cited by 161
Waschkies, T., Oberacker, R., & Hoffmann, M. J. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02673.x · Cited by 153
Ferraro, C., García‐Tuñón, E., Rocha, V. G., Barg, S., Fariñas, L., Álvarez-Arenas, T. E. G., Sernicola, G., Giuliani, F., & Saiz, E. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504051 · Cited by 151
Interfacial characteristics of composites fabricated by laminated object manufacturing
Klosterman, D., Chartoff, R. P., Graves, G., Osborne, N., & Priore, B. E. (1998) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(98)00088-8 · Cited by 142
Cellular Ceramics by Direct Foaming of Emulsified Ceramic Powder Suspensions
Barg, S., Soltmann, C., Andrade, M., Koch, D., & Grathwohl, G. (2008) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02553.x · Cited by 141
Dommati, H., Ray, S. S., Wang, J., & Chen, S.-S. (2019) · RSC Advances · doi:10.1039/c9ra00872a · Cited by 139
Roscow, J. I., Lewis, R. W. C., Taylor, J. T., & Bowen, C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.029 · Cited by 137
Naglieri, V., Gludovatz, B., Tomsia, A. P., & Ritchie, R. O. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.07.022 · Cited by 135
Tailored Macroporous SiCN and SiC Structures for High‐Temperature Fuel Reforming
Sung, I. K., Christian, Mitchell, M. R., Kim, D., & Kenis, P. J. A. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500038 · Cited by 135
Nguyen, P., & Pham, C. (2010) · Applied Catalysis A General · doi:10.1016/j.apcata.2010.07.054 · Cited by 132
Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity
Hu, L., Wang, C., & Huang, Y. H. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4331-9 · Cited by 127
Silicon carbide foam as a porous support platform for catalytic applications
Duong‐Viet, C., Ba, H., Berrichi, F. Z. E., Nhut, J., Ledoux, M. J., Liu, Y., & Pham‐Huu, C. (2016) · New Journal of Chemistry · doi:10.1039/c5nj02847g · Cited by 121
Improving the properties of ceramic foams by a vacuum infiltration process
Vogt, U. F., Gorbar, M., Dimopoulos-Eggenschwiler, P., Broenstrup, A., Wagner, G., & Colombo, P. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.06.003 · Cited by 120
Directionally aligned macroporous SiOC via freeze casting of preceramic polymers
Naviroj, M., Miller, S. M., Colombo, P., & Faber, K. T. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2015.02.013 · Cited by 119
3D Printing of Bioceramics for Bone Tissue Engineering
Zafar, M. J., Zhu, D., & Zhang, Z. (2019) · Materials · doi:10.3390/ma12203361 · Cited by 115
Cheng, Y., Tan, M., Hu, P., Zhang, X., Sun, B., Yan, L., Zhou, S., & Han, W. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.04.132 · Cited by 106
Freeze cast porous barium titanate for enhanced piezoelectric energy harvesting
Roscow, J. I., Zhang, Y., Kraśny, M. J., Lewis, R. W. C., Taylor, J., & Bowen, C. (2018) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aabc81 · Cited by 102
Macroporous silicon carbide foams for porous burner applications and catalyst supports
Vogt, U. F., Györfy, L., Herzog, A., et al. (2007) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2006.12.008 · Cited by 100
Micro methanol reformer combined with a catalytic combustor for a PEM fuel cell
Kim, T. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.06.024 · Cited by 100
Porous ferroelectrics for energy harvesting applications
Roscow, J. I., Zhang, Y., Taylor, J. T., & Bowen, C. (2015) · The European Physical Journal Special Topics · doi:10.1140/epjst/e2015-02600-y · Cited by 98
Porous PZT Ceramics with Aligned Pore Channels for Energy Harvesting Applications
Zhang, Y., Bao, Y., Zhang, D., & Bowen, C. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13797 · Cited by 96
Biocompatible evaluation of barium titanate foamed ceramic structures for orthopedic applications
Ball, J. P., Mound, B. A., Nino, J. C., & Allen, J. B. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34879 · Cited by 94
Abebe, L., Chen, X., & Sobsey, M. D. (2016) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph13030269 · Cited by 91
Processing and characterization of porous Ti2AlC with controlled porosity and pore size
Hu, L., Benitez, R., Basu, S., Karaman, İ., & Radović, M. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.07.052 · Cited by 88
Hong, C., Han, J., Zhang, X., & Du, J. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.12.015 · Cited by 87
Ren, D., & Smith, J. A. (2013) · Environmental Science & Technology · doi:10.1021/es4000752 · Cited by 87
Hierarchically Porous Ceramics from Diatomite Powders by Pulsed Current Processing
Akhtar, F., Vasiliev, P., & Bergström, L. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02882.x · Cited by 86
Fukushima, M., & Yoshizawa, Y. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2015.09.041 · Cited by 80
Reticulated macroporous ceramic foam supported TiO2 for photocatalytic applications
Plesch, G., Gorbár, M., Vogt, U. F., et al. (2008) · Materials Letters · doi:10.1016/j.matlet.2008.11.008 · Cited by 80
Porous Al2O3–ZrO2 composites fabricated by an ice template method
Liu, G., Zhang, D., Meggs, C., & Button, T. W. (2009) · Scripta Materialia · doi:10.1016/j.scriptamat.2009.12.018 · Cited by 80
Effect of Macropore Anisotropy on the Mechanical Response of Hierarchically Porous Ceramics
Lichtner, A. Z., Roussel, D., Jauffrès, D., Martin, C. L., & Bordia, R. K. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.14004 · Cited by 78
Jana, D. C., Sundararajan, G., & Chattopadhyay, K. (2016) · Journal of the American Ceramic Society · doi:10.1111/jace.14544 · Cited by 76
Zhang, H., & Oyanedel-Craver, V. A. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.05.025 · Cited by 74
Silk as a biocohesive sacrificial binder in the fabrication of hydroxyapatite load bearing scaffolds
McNamara, S. L., Rnjak‐Kovacina, J., Schmidt, D. F., Lo, T. J., & Kaplan, D. L. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.013 · Cited by 73
Porous silicon nitride ceramics designed for bone substitute applications
Bodišová, K., Kašiarová, M., Domanická, M., Hnatko, M., Lenčéš, Z., Nováková, Z. V., Vojtaššák, J., Gromošová, S., & Šajgalík, P. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.04.015 · Cited by 71
Electric field distribution in porous piezoelectric materials during polarization
Martínez-Ayuso, G., Friswell, M. I., Khodaparast, H. H., Roscow, J. I., & Bowen, C. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.04.021 · Cited by 71
Sadeghpour, S., Amirjani, A., Hafezi, M., & Zamanian, A. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.07.039 · Cited by 66
Silver Dissolution and Release from Ceramic Water Filters
Mittelman, A. M., Lantagne, D., Rayner, J., & Pennell, K. D. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b01428 · Cited by 66
Fabrication of Porous SiC Ceramics with Special Morphologies by Sacrificing Template Method
Wang, H., Sung, I.-K., Li, X., & Kim, D. (2004) · Journal of Porous Materials · doi:10.1023/b:jopo.0000046353.24308.86 · Cited by 65
Using porous bioceramic scaffolds to model healthy and osteoporotic bone
Baino, F., Caddeo, S., Novajra, G., & Vitale‐Brovarone, C. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.01.011 · Cited by 65
Balasubramanian, P., Grünewald, A., Detsch, R., Hupa, L., Jokić, B., Tallia, F., Solanki, A., Jones, J. R., & Boccaccini, A. (2016) · International Journal of Applied Glass Science · doi:10.1111/ijag.12206 · Cited by 65
Podshivalov, L., Gomes, C. M., Zocca, A., Guenster, J., Bar‐Yoseph, P., & Fischer, A. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.01.049 · Cited by 63
Abebe, L., Su, Y., Guerrant, R. L., Swami, N. S., & Smith, J. A. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02183 · Cited by 63
Andersson, L., & Bergström, L. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.04.020 · Cited by 62
Synthesis and structural evaluation of freeze-cast porous alumina
Souza, D. F., Nunes, E. H. M., Pimenta, D. S., Vasconcelos, D. C. L., do Nascimento, J. F., Grava, W. M., Houmard, M., & Vasconcelos, W. L. (2014) · Materials Characterization · doi:10.1016/j.matchar.2014.08.009 · Cited by 61
Roscow, J. I., Taylor, J. T., & Bowen, C. (2016) · Ferroelectrics · doi:10.1080/00150193.2016.1169154 · Cited by 61
Kumaresan, T., Gandhinathan, R., Ramu, M., Ananthasubramanian, M., & Kamarajan, B. P. (2016) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-016-1049-x · Cited by 61
Shaga, A., Shen, P., Guo, R., & Jiang, Q. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.052 · Cited by 58
Preparation of porous scaffold from hydroxyapatite powders
Swain, S. K., Bhattacharyya, S., & Sarkar, D. (2010) · Materials Science and Engineering C · doi:10.1016/j.msec.2010.11.014 · Cited by 57
Zhu, Y., Chen, S., Quan, X., Zhang, Y., Gao, C., & Feng, Y. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.12.048 · Cited by 54
Self-citationXu, T., & Wang, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.11.101 · Cited by 54
Piezoelectric Properties of the 1–3 Type Porous Lead Zirconate Titanate Ceramics
Guo, R., Wang, C., & Yang, A. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.04294.x · Cited by 53
Near‐Net‐Shaped Porous Ceramics for Potential Sound Absorption Applications at High Temperatures
Carlesso, M., Giacomelli, R. O., Günther, S., Koch, D., Kroll, S., Odenbach, S., & Rezwan, K. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12160 · Cited by 53
Kocjan, A., & Shen, Z. J. (2013) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.06.004 · Cited by 52
Thermal Conductivity of Very Porous Kaolin‐Based Ceramics
Bourret, J., Michot, A., Tessier-Doyen, N., Naït‐Ali, B., Pennec, F., Alzina, A., Vicente, J., Peyratout, C. S., & Smith, D. S. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12767 · Cited by 52
Microstructure, Property and Processing of Functional Ceramics
Yin, Q., Zhu, B., & Zeng, H. (2010) · Springer eBooks · doi:10.1007/978-3-642-01694-3 · Cited by 45
SiC porous structures obtained with innovative shaping technologies
Ferraro, C., García‐Tuñón, E., Barg, S., Miranda, M., Ni, N., Bell, R. V., & Saiz, E. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.09.048 · Cited by 44
Carlesso, M., Giacomelli, R. O., Krause, T., Molotnikov, A., Koch, D., Kroll, S., Tushtev, K., Estrin, Y., & Rezwan, K. (2013) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.05.006 · Cited by 41
Luo, L., Chen, X., Wang, Y., Yue, J., Du, Z., Huang, X., & Tang, X. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.196 · Cited by 40
Kumar, A., Akkineni, A. R., Basu, B., & Gelinsky, M. (2015) · Journal of Biomaterials Applications · doi:10.1177/0885328215617058 · Cited by 38
The effect of particle size in freeze casting of porous alumina–zirconia composite
Liu, G., & Button, T. W. (2013) · Ceramics International · doi:10.1016/j.ceramint.2013.02.101 · Cited by 37
Optical properties of ZrB2 porous architectures
Sani, E., Landi, E., Sciti, D., & Medri, V. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.09.068 · Cited by 37
Porous Y2SiO5 ceramics with a centrosymmetric structure produced by freeze casting
Zhang, R., Han, B., Fang, D., & Wang, Y. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.05.099 · Cited by 34
Fully interconnected porous Al2O3 scaffolds prepared by a fast cooling freeze casting method
Liu, X., Xue, W., Shi, C., & Sun, J. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.05.160 · Cited by 31
Noyen, J. V., Wilde, A. D., Schroeven, M., Mullens, S., & Luyten, J. (2012) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2012.02781.x · Cited by 31
Li, S., Wang, C., & Hu, L. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12564 · Cited by 30
Vijayan, S., Narasimman, R., & Prabhakaran, K. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.07.014 · Cited by 30
Electrically active and 3D porous TiO 2-x ceramic scaffolds for bone tissue regeneration
Narkevica, I., Stīpniece, L., Jakobsons, E., Čakstiņa, I., & Ozolins, J. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.09.032 · Cited by 30
Lamellar BaTiO3 and its composites fabricated by the freeze casting technique
Liu, G., Button, T. W., & Zhang, D. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.05.043 · Cited by 28
World Environmental and Water Resources Congress 2015
Karvazy, K., & Webster, V. L. (2015) · doi:10.1061/9780784479162 · Cited by 26
Kousaalya, A. B., Kumar, R., V, & Sridhar, B. T. N. (2014) · Ceramics International · doi:10.1016/j.ceramint.2014.09.044 · Cited by 23
Preparation and characterization of highly porous Yb2SiO5 ceramics using water-based freeze-casting
Han, B., Zhang, R., & Fang, D. (2015) · Journal of Porous Materials · doi:10.1007/s10934-015-0110-y · Cited by 22
Al-Attar, A. A., Zaeem, M. A., Ajeel, S. A., & Latiff, N. E. A. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.10.035 · Cited by 22
Control of pore structures and sizes in freeze cast ceramics
Zhang, Y., Zhou, K., Zeng, J. C., & Zhang, D. (2013) · Advances in Applied Ceramics Structural Functional and Bioceramics · doi:10.1179/1743676113y.0000000100 · Cited by 20
Nontoxic Processing of Reliable Macro‐Porous Ceramics
Salvini, V. R., Lasso, P. R. O., da Luz, A. P., & Pandolfelli, V. C. (2016) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12521 · Cited by 20
Fukushima, M., Fujiwara, T., Fey, T., & Kakimoto, K. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.15086 · Cited by 20
Goudouri, O., Vogel, C., Grünewald, A., Detsch, R., Kontonasaki, E., & Boccaccini, A. R. (2015) · Journal of Biomaterials Applications · doi:10.1177/0885328215584887 · Cited by 19
Conversion of wooden structures into porous SiC with shape memory synthesis
Dhiman, R., Petrunin, V. V., Rana, K., & Morgen, P. (2011) · Ceramics International · doi:10.1016/j.ceramint.2011.05.124 · Cited by 19
Xu, G., Olorunyolemi, T., Carmel, Y. C., Lloyd, I. K., & Wilson, O. C. (2003) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2003.tb03613.x · Cited by 15
The effect of TiO2 nanopowder coating on in vitro bioactivity of porous TiO2 scaffolds
Loča, D., Narkevica, I., & Ozoliņš, J. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.07.017 · Cited by 15
Cilla, M. S., Cartaxo, J. M., Menezes, R. R., Santana, L. N. D. L., & Neves, G. D. A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.02.053 · Cited by 13
Santos, S. C., Yamagata, C., Campos, L. L., & de Mello-Castanho, S. R. H. (2016) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2016.04.061 · Cited by 12
Preparation of Transparent Glass Sponges via Replica Method using High‐Purity Silica
Bucharsky, E. C., Schell, K. G., Oberacker, R., & Hoffmann, M. J. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03366.x · Cited by 10
Cited by
A review of 3D printed porous ceramics
Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 284
Wang, R., Qiao, G., & Song, G. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.132051 · Cited by 54
Metadata
- Authors
- Chen, Y., Wang, N., Ola, O., Xia, Y., & Zhu, Y.
- Venue
- Materials Science and Engineering: R: Reports
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 143
- Pages
- 100589
- ISSN
- 0927-796X (ISSN-L)
- OpenAlex
- W3109760658
- Cited by
- 441
- References
- 128
- FWCI
- 21.80
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.