The DOI matches its Crossref record; 570 of the 570 references it cites were found in a registry or an index.
CO2 capture materials: a review of current trends and future challenges
Open accessAbstract
Over the last decade, CO2 adsorption technology has quickly gained popularity and is now widely applied in global CCUS projects due to playing an important role in achieving net-zero emissions by 2050. As a result, new materials, or methods of post-modification of those already available have been successively reported to enhance the efficiency of CO2 capture from flue gases. This paper discusses a systematic understanding of fundamental aspects of current research trends is discussed in terms of developing selected CO2 solid adsorbent materials, with a particular emphasis on the upcoming challenges. The adsorbent candidates are reviewed considering the practical drawbacks of imposed by industrial scale and economics, including carbon-based materials, MOFs, polymers, zeolite, silica, alumina, metal oxides, amine-based adsorbents, and other composite porous materials. Solid sorbents derived from biomass, industrial residues, and their thermochemical conversion are also studied due to the high need for cost-effective raw materials and their crucial role in circular economy. Lastly, a techno-economic analysis (TEA) is included to provide the most important criteria that should be considered when adsorbents are implemented on an industrial scale. Consequently, the review is summarized, and recommendations are offered for future research development of CO2 adsorbent materials. The paper aims to establish a comprehensive and fundamental theoretical basis for the characterization of adsorbent technologies currently used to reduce CO2 emissions, along with highlighting the identification and precise articulation of the most important future research paths that could be beneficial to address over the next years.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–400 of 570
CO2 Sorption on MgO and CaO Surfaces: A Comparative Quantum Chemical Cluster Study
Jensen, M. B., Pettersson, L. G. M., Swang, O., & Olsbye, U. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp052037h · Cited by 169
Effect of the Pore Length on CO2 Adsorption over Amine-Modified Mesoporous Silicas
Heydari-Gorji, A., Yang, Y., & Sayari, A. (2011) · Energy & Fuels · doi:10.1021/ef200765f · Cited by 169
Facile synthesis of CuBTC and its graphene oxide composites as efficient adsorbents for CO2 capture
Shang, S., Tao, Z., Yang, C., Hanif, A., Li, L., Tsang, D. C. W., Gu, Q., & Shang, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124666 · Cited by 169
Physical synthesis and characterization of activated carbon from date seeds for CO2 capture
Ogungbenro, A. E., Quang, D. V., Al-Ali, K. A., Vega, L. F., & Abu-Zahra, M. R. M. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.06.030 · Cited by 168
Activated carbons and amine-modified materials for carbon dioxide capture — a review
Chen, Z., Deng, S., Wei, H., Wang, B., Huang, J., & Yu, G. (2013) · Frontiers of Environmental Science & Engineering · doi:10.1007/s11783-013-0510-7 · Cited by 167
Sreńscek-Nazzal, J., Kamińska, W., Michalkiewicz, B., & Koren, Z. C. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.03.004 · Cited by 167
Recent advances in development of amine functionalized adsorbents for CO2 capture
Gelles, T., Lawson, S., Rownaghi, A. A., & Rezaei, F. (2020) · Adsorption · doi:10.1007/s10450-019-00151-0 · Cited by 167
Further investigations of CO2 capture using triamine-grafted pore-expanded mesoporous silica
Serna-Guerrero, R., Belmabkhout, Y., & Sayari, A. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.01.041 · Cited by 166
Prasad, T. K., & Suh, M. P. (2012) · Chemistry – A European Journal · doi:10.1002/chem.201200456 · Cited by 166
Surface modifications of carbonaceous materials for carbon dioxide adsorption: A review
Chiang, Y.-C., & Juang, R.-S. (2017) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2016.12.014 · Cited by 166
Development of microporous carbons for CO2 capture by KOH activation of African palm shells
Ello, A. S., de Souza, L. K. C., Trokourey, A., & Jaroniec, M. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.07.003 · Cited by 165
Adsorption equilibria and kinetics of CO2 and N2 on activated carbon beads
Shen, C., Grande, C. A., Li, P., Yu, J., & Rodrigues, A. E. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.12.005 · Cited by 164
Liu, S., Peng, W., Sun, H., & Wang, S. (2014) · Nanoscale · doi:10.1039/c3nr04282k · Cited by 164
Shen, X., Du, H., Mullins, R. H., & Kommalapati, R. R. (2017) · Energy Technology · doi:10.1002/ente.201600694 · Cited by 163
Advanced Materials Research Vol. 1160
Kieush, L. (2021) · Advanced Materials Research · doi:10.4028/b-fxq5zi · Cited by 163
Understanding Trends in CO2 Adsorption in Metal–Organic Frameworks with Open-Metal Sites
Poloni, R., Lee, K., Berger, R. F., Smit, B., & Neaton, J. B. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500202x · Cited by 162
Water Effects on Postcombustion CO2 Capture in Mg-MOF-74
Yu, J., & Balbuena, P. B. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp311118x · Cited by 162
Carbon dioxide capture using various metal oxyhydroxide–biochar composites
Creamer, A. E., Gao, B., & Wang, S. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.037 · Cited by 161
CO2 capture using triamine-grafted SBA-15: The impact of the support pore structure
Jahandar Lashaki, M., & Sayari, A. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.103 · Cited by 161
Adsorption of carbon dioxide on alkali-modified zeolite 13X adsorbents
Zhao, Z., Cui, X., Ma, J., & Li, R. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00072-2 · Cited by 160
Adhikari, A. K., & Lin, K.-S. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.09.086 · Cited by 160
Hsan, N., Dutta, P. K., Kumar, S., Bera, R., & Das, N. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.071 · Cited by 160
Synthesis Methods of Mesoporous Silica Materials
Kumar, S., Malik, M. M., & Purohit, R. (2017) · Materials Today Proceedings · doi:10.1016/j.matpr.2017.01.032 · Cited by 159
Post-combustion CO2 capture using mesoporous TiO2/graphene oxide nanocomposites
Chowdhury, S., Parshetti, G. K., & Balasubramanian, R. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.11.037 · Cited by 158
Modified carbon nanotubes/tetraethylenepentamine for CO2 capture
Irani, M., Jacobson, A. T., Gasem, K. A. M., & Fan, M. (2017) · Fuel · doi:10.1016/j.fuel.2017.05.087 · Cited by 158
Liu, Y., Ghimire, P. P., & Jaroniec, M. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.09.086 · Cited by 158
Heidari, M., Tahmasebpoor, M., Mousavi, S. B., & Pevida, C. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2021.101747 · Cited by 158
Assessment of porous carbons derived from sustainable palm solid waste for carbon dioxide capture
Nasri, N. S., Hamza, U. D., Ismail, S. N., Ahmed, M. M., & Mohsin, R. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2013.11.053 · Cited by 157
Preparation of CaO–Al2O3 sorbent and CO2 capture performance at high temperature
Zhang, M., Peng, Y., Sun, Y., Li, P., & Yu, J. (2013) · Fuel · doi:10.1016/j.fuel.2013.03.078 · Cited by 157
Park, H. J., Cheon, Y. E., & Suh, M. P. (2010) · Chemistry - A European Journal · doi:10.1002/chem.201001549 · Cited by 156
Breakthrough CO 2 adsorption in bio-based activated carbons
Shahkarami, S., Azargohar, R., Dalai, A. K., & Soltan, J. (2015) · Journal of Environmental Sciences · doi:10.1016/j.jes.2015.03.008 · Cited by 155
Ye, Q., Jiang, J., Wang, C., Liu, Y., Pan, H., & Shi, Y. (2012) · Energy & Fuels · doi:10.1021/ef201699w · Cited by 155
Adsorption of CH4 and CO2 on Zr-metal organic frameworks
Abid, H. R., Pham, G. H., Ang, H. M., Tadé, M. O., & Wang, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.09.060 · Cited by 154
Synthesis of hierarchical porous Zeolite-Y for enhanced CO2 capture
Dabbawala, A. A., Ismail, I., Balasubramanian, V. V., Polychronopoulou, K., Singaravel, G., Morin, S., Berthod, M., & Wahedi, Y. A. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110261 · Cited by 154
Qian, D., Cheng, L., Hao, G., Li, W., & Lu, A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am301772k · Cited by 153
Huang, N., Chen, X., Krishna, R., & Jiang, D. (2015) · Angewandte Chemie · doi:10.1002/ange.201411262 · Cited by 153
Thakkar, H. V., Eastman, S., Al-Mamoori, A. A., Hajari, A., Rownaghi, A. A., & Rezaei, F. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16732 · Cited by 152
Liao, Y., Cheng, Z., Zuo, W., Thomas, A., & Faul, C. F. J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09553 · Cited by 152
Covalent Organic Frameworks for the Capture, Fixation, or Reduction of CO2
Ozdemir, J., Mosleh, I., Abolhassani, M., Greenlee, L. F., Beitle, R. R., & Beyzavi, M. H. (2019) · Frontiers in Energy Research · doi:10.3389/fenrg.2019.00077 · Cited by 150
Luo, R., Chen, M., Liu, X., Xu, W., Li, J., Liu, B., & Fang, Y. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta06142e · Cited by 150
Yuan, D., Zhao, D., Sun, D., & Zhou, H.-C. “. (2010) · Angewandte Chemie · doi:10.1002/ange.201001009 · Cited by 150
Using 13X, LiX, and LiPdAgX zeolites for CO2 capture from post-combustion flue gas
Chen, S. J., Zhu, M., Fu, Y., Huang, Y., Tao, Z. C., & Li, W. L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.01.031 · Cited by 148
Chen, C., Li, B., Zhou, L., Xia, Z.-F., Feng, N., Ding, J., Wang, L., Wan, H. L., & Guan, G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b08117 · Cited by 147
Ruhaimi, A. H., Aziz, M. A. A., & Jalil, A. A. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101357 · Cited by 147
Adsorption of CO2on Zeolite 13X and Activated Carbon with Higher Surface Area
Zhang, Z., Zhang, W., Chen, X., Xia, Q., & Li, Z. (2010) · Separation Science and Technology · doi:10.1080/01496390903571192 · Cited by 146
Advanced adsorbents based on MgO and K2CO3 for capture of CO2 at elevated temperatures
Xiao, G., Singh, R., Chaffee, A. L., & Webley, P. A. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2011.04.002 · Cited by 146
Rao, N., Wang, M., Shang, Z., Hou, Y., Fan, G., & Li, J. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b02906 · Cited by 146
Liang, P., Qin, Y., Hu, B., Peng, T., & Jiang, Z. (2001) · Analytica Chimica Acta · doi:10.1016/s0003-2670(01)01010-8 · Cited by 144
Amino-impregnated MOF materials for CO2 capture at post-combustion conditions
Martínez, F., Sanz, R., Orcajo, G., Briones, D., & Yángüez, V. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2015.11.033 · Cited by 144
Targeted synthesis of a mesoporous triptycene-derived covalent organic framework
Kahveci, Z., İslamoğlu, T., Shar, G. A., Ding, R., & El‐Kaderi, H. M. (2012) · CrystEngComm · doi:10.1039/c2ce26487k · Cited by 143
Amine-Grafted Silica Gels for CO 2 Capture Including Direct Air Capture
Anyanwu, J.-T., Wang, Y., & Yang, R. T. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b05228 · Cited by 143
Preparation of microporous activated carbon and its modification for arsenic removal from water
Asadullah, M., Jahan, I., Ahmed, M. B., Adawiyah, P., Malek, N. H., & Rahman, M. S. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.06.019 · Cited by 141
Singh, B., & Polshettiwar, V. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01348a · Cited by 141
Shao, L., Li, Y., Huang, J., & Liu, Y. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04533 · Cited by 141
Khan, N., Mohan, S., & Dinesha, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125629 · Cited by 141
Qiao, Y., Wang, J., Zhang, Y., Gao, W., Harada, T., Huang, L., Hatton, T. A., & Wang, Q. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b04793 · Cited by 140
Mesoporous adsorbent for CO2 capture application under mild condition: A review
Azmi, A., & Aziz, M. A. A. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103022 · Cited by 140
Effect of heat treatment on CO2 adsorption of KOH-activated graphite nanofibers
Meng, L., & Park, S. (2010) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.08.048 · Cited by 139
Different Approaches for the Development of Low-Cost CO2 Adsorbents
Plaza, M. G., Pevida, C., Arias, B., Casal, M. D., Martín, C. F., Fermoso, J., Rubiera, F., & Pis, J. J. (2009) · Journal of Environmental Engineering · doi:10.1061/(asce)ee.1943-7870.0000009 · Cited by 139
Designed porous carbon materials for efficient CO2 adsorption and separation
Zhang, X.-Q., Li, W., & Lu, A. (2015) · New Carbon Materials · doi:10.1016/s1872-5805(15)60203-7 · Cited by 139
CO2 capture using N-containing nanoporous activated carbon obtained from argan fruit shells
Boujibar, O., Souikny, A., Ghamouss, F., Achak, O., Dahbi, M., & Chafik, T. (2018) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2018.03.005 · Cited by 137
Preparation and characterization of aminated graphite oxide for CO2 capture
Zhao, Y., Ding, H., & Zhong, Q. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2011.12.085 · Cited by 137
Activation Strategies for Calcium-Based Sorbents for CO2 Capture: A Perspective
Yu, F.-C., Phalak, N., Sun, Z., & Fan, L. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200802y · Cited by 137
Álvarez, J., López, G., Amutio, M., Bilbao, J., & Olazar, M. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b01589 · Cited by 137
Investigation on a novel CaO–Y2O3 sorbent for efficient CO2 mitigation
Zhang, X., Li, Z., Peng, Y., Su, W., Sun, X., & Li, J. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.01.017 · Cited by 136
Transition metal cation-exchanged SSZ-13 zeolites for CO2 capture and separation from N2
Sun, M., Gu, Q., Hanif, A., Wang, T., & Shang, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.03.234 · Cited by 136
Wei, H., Chen, H., Fu, N., Chen, J., Lan, G., Qian, W., Liu, Y., Lin, H., & Han, S. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.01.194 · Cited by 135
Zeolite-Based Sorbent for CO 2 Capture: Preparation and Performance Evaluation
Murge, P., Dinda, S., & Roy, S. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b02259 · Cited by 135
Liu, X., Sun, C., Liu, H., Tan, W., Wang, W., & Snape, C. E. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.11.062 · Cited by 134
Hydrothermal carbonization of lignocellulosic agro-forest based biomass residues
Mendoza-Martinez, C., Sermyagina, E., Saari, J., de Jesus, M. S., Cardoso, M., de Almeida, G. M., & Vakkilainen, E. K. (2021) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2021.106004 · Cited by 134
Sorption and kinetics of CO2 and CH4 in binderless beads of 13X zeolite
Silva, J. A. C., Schumann, K., & Rodrigues, A. E. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.03.042 · Cited by 133
Ullah, S., Bustam, M. A., Al-Sehemi, A. G., Assiri, M. A., Kareem, F. A. A., Mukhtar, A., Ayoub, M., & Gonfa, G. H. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110002 · Cited by 133
Ma, X., Chen, R., Zhou, K. C., Wu, Q., Li, H., Zeng, Z., & Li, L. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c03725 · Cited by 133
Development of high-temperature CO2 sorbents made of CaO-based mesoporous silica
Huang, C., Chang, K.-P., Yu, C., Chiang, P., & Wang, C. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.04.045 · Cited by 132
Microporous adsorbents for CO2 capture – a case for microporous polymers?
Xu, C., & Hedin, N. (2014) · Materials Today · doi:10.1016/j.mattod.2014.05.007 · Cited by 131
Recent advances in the synthesis of covalent organic frameworks for CO 2 capture
Olajire, A. A. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2016.12.003 · Cited by 131
Guo, X., Ding, L., Kanamori, K., Nakanishi, K., & Yang, H. Y. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.02.076 · Cited by 131
A comparative study of CO2 sorption properties for different oxides
Kumar, S., & Saxena, S. K. (2014) · Materials for Renewable and Sustainable Energy · doi:10.1007/s40243-014-0030-9 · Cited by 130
Xu, D., Swindlehurst, G. R., Wu, H., OLSON, D. H. L., Zhang, X., & Michael Tsapatsis, B. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201301975 · Cited by 130
Illingworth, J. M., Rand, B., & Williams, P. T. (2022) · Fuel Processing Technology · doi:10.1016/j.fuproc.2022.107348 · Cited by 130
Carbon Dioxide Adsorption on Sawdust Biochar
Madzaki, H., KarimGhani, W. A. W. A. B., NurZalikhaRebitanim, & AzilBahariAlias (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.591 · Cited by 129
High capacity polyethylenimine impregnated microtubes made of carbon nanotubes for CO2 capture
Keller, L., Ohs, B., Lenhart, J., Abduly, L., Blanke, P., & Weßling, M. (2017) · Carbon · doi:10.1016/j.carbon.2017.10.023 · Cited by 129
Three-Dimensional Graphene-Based Porous Adsorbents for Postcombustion CO2 Capture
Chowdhury, S., & Balasubramanian, R. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04052 · Cited by 128
Ravenni, G., Sárossy, Z., Ahrenfeldt, J., & Henriksen, U. B. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.001 · Cited by 127
Serafin, J., Ouzzine, M., Junior, O. F. C., Sreńscek-Nazzal, J., Gómez, I. C., Azar, F.-Z., Rey-Mafull, C. A., Hotza, D., & Rambo, C. R. (2021) · Waste Management · doi:10.1016/j.wasman.2021.10.025 · Cited by 127
Self-citationActivated charcoal from coconut shell using ZnCl2 activation
Mozammel, H. M., Ota, M., & Sc, B. (2002) · Biomass and Bioenergy · doi:10.1016/s0961-9534(02)00015-6 · Cited by 126
A leaf-branch TiO2/carbon@MOF composite for selective CO2 photoreduction
Zhou, A., Dou, Y., Chen, Z., Zhou, J. W., Wu, X., & Li, J. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.118519 · Cited by 126
Chatterjee, R., Sajjadi, B., Mattern, D. L., Chen, W.-Y., Zubatiuk, T., Leszczynska, D., Leszczynski, J., Egiebor, N. O., & Hammer, N. (2018) · Fuel · doi:10.1016/j.fuel.2018.03.145 · Cited by 125
Ma, S., Wang, X.-S., Manis, E. S., Collier, C. D., & Zhou, H.-C. “. (2007) · Inorganic Chemistry · doi:10.1021/ic070338v · Cited by 125
Davarpanah, E., Armandi, M., Hernández, S., Fino, D., Arletti, R., Bensaid, S., & Piumetti, M. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.111229 · Cited by 125
Rashidi, N. A., Yusup, S. B., Borhan, A., & Loong, L. H. (2014) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-014-0788-6 · Cited by 124
CO2 capture with pore-expanded MCM-41 silica modified with amino groups by double functionalization
Sanz, R., Calleja, G., Arencibia, A., & Sanz-Pérez, E. S. (2014) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2014.10.045 · Cited by 124
Wang, X., Guo, Q., & Kong, T. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.03.098 · Cited by 123
Jiao, J., Cao, J. X., Xia, Y., & Zhao, L. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.07.041 · Cited by 123
Pozzo, A. D., Armutlulu, A., Rekhtina, M., Abdala, P. M., & Müller, C. R. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b01852 · Cited by 123
MOFs in carbon capture-past, present and future
Aniruddha, R., Sreedhar, I., & Reddy, B. M. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101297 · Cited by 123
Recent developments and consideration issues in solid adsorbents for CO2 capture from flue gas
Nie, L., Mu, Y., Jin, J., Chen, J., & Mi, J. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.07.012 · Cited by 122
Adsorption of CO2 on Activated Carbons Prepared by Chemical Activation with Cupric Nitrate
Acevedo, S., Giraldo, L., & Moreno‐Piraján, J. C. (2020) · ACS Omega · doi:10.1021/acsomega.0c00342 · Cited by 122
Triazine-based hyper-cross-linked polymers derived porous carbons for CO2 capture
Shao, L., Wang, S., Liu, M., Huang, J., & Liu, Y. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.145 · Cited by 121
Nowrouzi, M., Younesi, H., & Bahramifar, N. (2018) · Fuel · doi:10.1016/j.fuel.2018.03.035 · Cited by 120
Enhanced carbon dioxide uptake by metalloporphyrin-based microporous covalent triazine framework
Liu, X., Li, H., Zhang, Y., Xu, B., Sigen, A., Xia, H., & Mu, Y. (2013) · Polymer Chemistry · doi:10.1039/c3py00083d · Cited by 119
A highly stable metal‐organic framework with optimum aperture size for CO2 capture
Hu, Z., Wang, Y., Farooq, S., & Zhao, D. (2017) · AIChE Journal · doi:10.1002/aic.15837 · Cited by 118
Functionalized Carbon Materials for Electronic Devices: A Review
Kamran, U., Heo, Y., Lee, J. E., & Park, S. (2019) · Micromachines · doi:10.3390/mi10040234 · Cited by 118
Llewellyn, P. L., Bourrelly, S., Serre, C., Filinchuk, Y. E., & Férey, G. (2006) · Angewandte Chemie · doi:10.1002/ange.200602278 · Cited by 118
Zhang, K., Li, X. S., Duan, Y., King, D. L., Singh, P., & Li, L. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.11.013 · Cited by 117
Enhanced CO 2 Adsorption Using MgO-Impregnated Activated Carbon: Impact of Preparation Techniques
Shahkarami, S., Dalai, A. K., & Soltan, J. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04824 · Cited by 117
Reuse and recycling of amine-functionalized silica materials for CO2 adsorption
Sanz-Pérez, E. S., Dantas, T. C. M., Arencibia, A., Calleja, G., Guedes, A. P. M. A., de Araujo, A. S., & Sanz, R. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.109 · Cited by 117
CO2 adsorption performance of different amine-based siliceous MCM-41 materials
Liu, Z., Teng, Y., Zhang, K., Chen, H., & Yang, Y. (2015) · Journal of Energy Chemistry · doi:10.1016/s2095-4956(15)60318-7 · Cited by 116
A CO2 Capture Technology Using Multi-walled Carbon Nanotubes with Polyaspartamide Surfactant
Ngoy, J. M., Wagner, N. J., Riboldi, L., & Bolland, O. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.11.242 · Cited by 116
Amine-modified ordered mesoporous silica: The effect of pore size on CO2 capture performance
Wang, L., Yao, M., Hu, X. D., Hu, G., Lu, J.-Q., Luo, M., & Fan, M. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.10.135 · Cited by 116
Ceria nanoparticles as heterogeneous catalyst for CO2 fixation by ω-aminoalcohols
Juárez, R., Concepción, P., Corma, A., & Garcı́a, H. (2010) · Chemical Communications · doi:10.1039/c001955k · Cited by 116
Efficient CO2 Capture and Photoreduction by Amine‐Functionalized TiO2
Liao, Y., Cao, S., Yuan, Y., Gu, Q., Zhang, Z., & Xue, C. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201403321 · Cited by 116
Enhanced CO 2 Adsorption Performance on Hierarchical Porous ZSM-5 Zeolite
Liu, Q., He, P., Qian, X., Fei, Z., Zhang, Z., Chen, X., Tang, J., Cui, M., Qiao, X., & Shi, Y. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b02543 · Cited by 116
Varghese, A. M., Reddy, K. S. K., Bhoria, N., Singh, S., Pokhrel, J., & Karanikolos, G. N. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129677 · Cited by 116
Wang, X., & Song, C. (2012) · Catalysis Today · doi:10.1016/j.cattod.2012.08.008 · Cited by 115
Han, Y., Hwang, G., Kim, H., HAZNEDAROĞLU, B. Z., & Lee, B. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.043 · Cited by 113
Activated carbon produced from paulownia sawdust for high-performance CO2 sorbents
Zhu, X.-L., Wang, P.-Y., Peng, C., Yang, J., & Yan, X.-B. (2014) · Chinese Chemical Letters · doi:10.1016/j.cclet.2014.03.039 · Cited by 112
Fu, Z., Jia, J., Li, J., & Liu, C. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.090 · Cited by 112
Amine-functionalized mesoporous ZSM-5 zeolite adsorbents for carbon dioxide capture
Wang, Y., Du, T., Song, Y., Che, S., Fang, X., & Zhou, L. (2017) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2017.09.004 · Cited by 112
Hierarchical Zeolites with Amine‐Functionalized Mesoporous Domains for Carbon Dioxide Capture
Nguyen, T. H., Kim, S., Yoon, M., & Bae, T. (2016) · ChemSusChem · doi:10.1002/cssc.201600004 · Cited by 111
Nováček, M., Jankovský, O., Luxa, J., Sedmidubský, D., Pumera, M., Fíla, V., Lhotka, M., Klímová, K., Matějková, S., & Sofer, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03631g · Cited by 111
Activated carbon from tomato stem by chemical activation with FeCl2
Fu, K., Yue, Q., Gao, B., Wang, Y., & Li, Q. (2017) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2017.06.064 · Cited by 111
Ultrasound-assisted amine functionalized graphene oxide for enhanced CO2 adsorption
Liu, Y., Sajjadi, B., Chen, W.-Y., & Chatterjee, R. (2019) · Fuel · doi:10.1016/j.fuel.2019.03.011 · Cited by 111
Elvira, G.-B., Francisco, G.-C., Víctor, S.-M., & Alberto, M.-L. R. (2016) · Journal of Environmental Sciences · doi:10.1016/j.jes.2016.11.016 · Cited by 110
Support and Size Effects of Activated Hydrotalcites for Precombustion CO2Capture
Meis, N. N. A. H., Bitter, J. H., & de Jong, K. P. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie901114d · Cited by 109
Adsorption of CO2 in FAU zeolites: Effect of zeolite composition
Thang, H. V., Grajciar, L., Nachtigall, P., Bludský, O., Areán, C. O., Frýdová, E., & Bulánek, R. (2013) · Catalysis Today · doi:10.1016/j.cattod.2013.10.036 · Cited by 109
Zukal, A., Areán, C. O., Delgado, M. R., Nachtigall, P., Pulido, A., Mayerová, J., & Čejka, J. (2011) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2011.03.034 · Cited by 108
Zhao, Y., Seredych, M., Zhong, Q., & Bandosz, T. J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am4006989 · Cited by 108
Wang, X., Zhao, Y., Wei, L., Zhang, C., & Jiang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05230k · Cited by 107
García-Gallastegui, A., Iruretagoyena, D., Mokhtar, M., Asiri, A. M., Basahel, S. N., Al-Thabaiti, S. A., Al-Youbi, A. O., CHADWICK, D. H., & Shaffer, M. S. P. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm00059h · Cited by 107
The nature of cationic adsorption sites in alkaline zeolites—single, dual and multiple cation sites
Nachtigall, P., Delgado, M. R., Nachtigallová, D., & Areán, C. O. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp23237e · Cited by 107
Cu-BTC/Aminated Graphite Oxide Composites As High-Efficiency CO2 Capture Media
Policicchio, A., Zhao, Y., Zhong, Q., Agostino, R. G., & Bandosz, T. J. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am404952z · Cited by 107
Amine tethered pore-expanded MCM-41: A promising adsorbent for CO2 capture
Loganathan, S., & Ghoshal, A. K. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.103 · Cited by 105
Shao, L., Liu, M., Huang, J., & Liu, Y. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.11.043 · Cited by 105
Adsorption of CO2, CH4 and N2 on ordered mesoporous silica molecular sieve
Liu, X., Li, J., Zhou, L., Huang, D., & Zhou, Y. (2005) · Chemical Physics Letters · doi:10.1016/j.cplett.2005.09.009 · Cited by 104
Zheng, B., Yun, R., Bai, J., Lu, Z., Du, L., & Li, Y. (2013) · Inorganic Chemistry · doi:10.1021/ic301598n · Cited by 104
Hassanzadeh, A., & Abbasian, J. (2009) · Fuel · doi:10.1016/j.fuel.2009.11.017 · Cited by 104
A direct synthesis of mesoporous carbon supported MgO sorbent for CO2 capture
Bhagiyalakshmi, M., Hemalatha, P., Ganesh, M., Mei, P., & Jang, H. T. (2010) · Fuel · doi:10.1016/j.fuel.2010.10.050 · Cited by 103
A novel process for CO2/CH4 gas separation on activated carbon fibers—electric swing adsorption
Moon, S.-H., & Shim, J. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2005.12.052 · Cited by 103
A novel removal of CO 2 using nitrogen doped biochar beads as a green adsorbent
Nguyen, M.-V., & Lee, B.-K. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.04.007 · Cited by 103
Biomass ash stabilized MgO adsorbents for CO2 capture application
Guo, Y., Tan, C., Sun, J., Li, W., Zhang, J., & Zhao, C. (2019) · Fuel · doi:10.1016/j.fuel.2019.116298 · Cited by 103
Dispersed Calcium Oxide as a Reversible and Efficient CO2−Sorbent at Intermediate Temperatures
Gruene, P., Belova, A. A. G., Yegulalp, T. M., Farrauto, R. J., & Castaldi, M. J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie102475d · Cited by 102
Broda, M., Kierzkowska, A., & Müller, C. R. (2012) · Environmental Science & Technology · doi:10.1021/es302757e · Cited by 102
Tuning the textural properties of HMS mesoporous silica. Functionalization towards CO2 adsorption
Sanz-Pérez, E. S., Arencibia, A., Calleja, G., & Sanz, R. (2017) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.10.038 · Cited by 102
Polyethylenimine-incorporated zeolite 13X with mesoporosity for post-combustion CO2 capture
Chen, C., Kim, S.-S., Cho, W.-S., & Ahn, W. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.01.106 · Cited by 101
Dynamic capture of low-concentration CO2 on amine hybrid silsesquioxane aerogel
Kong, Y., Shen, X., Fan, M., Yang, M., & Cui, S. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.08.034 · Cited by 100
Macadamia nut shell-derived carbon composites for post combustion CO2 capture
Bae, J., & Su, S. (2013) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2013.08.013 · Cited by 99
Bera, R., Ansari, M., Alam, A., & Das, N. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00264 · Cited by 98
Development of CaO-based adsorbents loaded on charcoal for CO2 capture at high temperature
Gao, N., Chen, K., & Quan, C. (2019) · Fuel · doi:10.1016/j.fuel.2019.116411 · Cited by 98
Manufacture of calcium-based sorbents for high temperature cyclic CO2 capture via a sol–gel process
Luo, C., Zheng, Y., Zheng, C., Yin, J., Qin, C., & Feng, B. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.11.011 · Cited by 97
Adsorption of CO2 and N2 on synthesized NaY zeolite at high temperatures
Shao, W., Zhang, L., Li, L., & Lee, R. L. (2009) · Adsorption · doi:10.1007/s10450-009-9200-y · Cited by 97
Rahimi, K., Riahi, S., Abbasi, M., & Fakhroueian, Z. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.04.036 · Cited by 96
Guo, Y., Tan, C., Wang, P., Sun, J., Li, W., Zhao, C., & Lu, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122277 · Cited by 96
Zhang, X., Wu, J., Yang, H., Shao, J., Wang, X., Chen, Y., Zhang, S., & Chen, H. (2016) · RSC Advances · doi:10.1039/c6ra23748g · Cited by 95
CaO recovered from eggshell waste as a potential adsorbent for greenhouse gas CO2
Hsieh, S., Li, F., Lin, P., Beck, D. E., Kirankumar, R., Wang, G.-J., & Hsieh, S. (2021) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.113430 · Cited by 95
Wahono, S. K., Stalin, J., Addai-Mensah, J., Skinner, W., Vinu, A., & Vasilev, K. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.109871 · Cited by 93
Wet mixing combustion synthesis of CaO-based sorbents for high temperature cyclic CO2 capture
Luo, C., Zheng, Y., Xu, Y., Ding, N., Shen, Q., & Zheng, C. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.01.005 · Cited by 93
Enhanced CO2 adsorption of MgO with alkali metal nitrates and carbonates
Ding, J., Yu, C., Lu, J., Wei, X., Wang, W., & Pan, G. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114681 · Cited by 93
Novel Amine-Functionalized Magnesium Oxide Adsorbents for CO2 Capture at Ambient Conditions
Alkadhem, A. M., Elgzoly, M. A. A., & Onaizi, S. A. (2020) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2020.103968 · Cited by 93
Enhancement of CO2 adsorption on biochar sorbent modified by metal incorporation
Zubbri, N. A., Mohamed, A. R., Kamiuchi, N., & Mohammadi, M. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-07734-3 · Cited by 92
Kishibayev, K., Serafin, J., Tokpayev, R., Khavaza, T., Atchabarova, А., Abduakhytova, D., Ibraimov, Z., & Sreńscek-Nazzal, J. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106798 · Cited by 92
Self-citationSong, C., Hu, J., Ling, Y., Feng, Y., Krishna, R., Chen, D.-L., & He, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta05481h · Cited by 91
Chitosan-based zeolite-Y and ZSM-5 porous biocomposites for H2 and CO2 storage
Kumar, S., Bera, R., Das, N., & Koh, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115808 · Cited by 91
B40 fullerene: An efficient material for CO2 capture, storage and separation
Dong, H., Lin, B., Gilmore, K., Hou, T., Lee, S., & Li, Y. (2015) · Current Applied Physics · doi:10.1016/j.cap.2015.06.008 · Cited by 90
Cao, Y., Zhao, Y., Song, F., & Zhong, Q. (2014) · Journal of Energy Chemistry · doi:10.1016/s2095-4956(14)60173-x · Cited by 90
Lee, M.-S., Lee, S., & Park, S. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.12.104 · Cited by 90
Effect of Dopants on the Adsorption of Carbon Dioxide on Ceria Surfaces
Li, M., Tumuluri, U., Wu, Z., & Dai, S. (2015) · ChemSusChem · doi:10.1002/cssc.201500899 · Cited by 90
Development of polyethylenimine-functionalized mesoporous Si-MCM-41 for CO2 adsorption
Ahmed, S., Ramli, A., & Yusup, S. B. (2017) · Fuel Processing Technology · doi:10.1016/j.fuproc.2017.07.036 · Cited by 90
Ma, D., Liu, K., Li, J., & Shi, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03517 · Cited by 90
Enhanced CO2 capture using organic acid structure modified waste eggshell derived CaO sorbent
Nawar, A., Ali, M., Khoja, A. H., Waqas, A., Anwar, M., & Mahmood, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104871 · Cited by 89
Asefa, T., & Tao, Z. (2012) · Canadian Journal of Chemistry · doi:10.1139/v2012-094 · Cited by 89
Chen, C., Feng, N., Guo, Q., Li, Z., Li, X., Ding, J., Wang, L., Wan, H. L., & Guan, G. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.12.014 · Cited by 89
Ultrafast and Stable CO2 Capture Using Alkali Metal Salt-Promoted MgO–CaCO3 Sorbents
Cui, H., Zhang, Q., Hu, Y., Peng, C., Fang, X., Cheng, Z., Galvita, V., & Zhou, Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b05829 · Cited by 89
Zhao, P., Zhang, G., Yan, H., & Zhao, Y. (2020) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2020.11.028 · Cited by 89
Improvement of CO2 capture by graphite oxide in presence of polyethylenimine
Shin, G.-J., Rhee, K. Y., & Park, S. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.162 · Cited by 88
Hydroxide modified activated alumina as an adsorbent for CO2 adsorption: Experimental and modeling
Mohammad, N. K., Ghaemi, A., & Tahvildari, K. (2019) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2019.05.029 · Cited by 88
Zhang, Y., & Park, S. (2019) · Polymer · doi:10.1016/j.polymer.2019.01.086 · Cited by 87
Superior CO 2 adsorption from waste coffee ground derived carbons
Travis, W., Gadipelli, S., & Guo, Z. (2015) · RSC Advances · doi:10.1039/c4ra13026j · Cited by 86
Bian, Z., Xu, J. F., Zhang, S., Zhu, X., Liu, H., & Hu, J. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b01171 · Cited by 86
A comparison of two methods for producing CO2 capture adsorbents
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Rubiera, F., & Pis, J. J. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.146 · Cited by 85
Xu, T., Fan, L., Jiang, Z., Zhou, P., Li, Z., Lu, H., & He, Y. (2020) · Dalton Transactions · doi:10.1039/d0dt01081b · Cited by 84
Othman, F. E. C., Yusof, N. B., Samitsu, S., Abdullah, N., Hamid, M. F., Nagai, K., Abidin, M. N. Z., Azali, M. A., Ismail, A. F., Jaafar, J., et al. (2021) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2021.101434 · Cited by 84
Subraveti, S. G., Roussanaly, S., Anantharaman, R., Riboldi, L., & Rajendran, A. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117955 · Cited by 84
New hybrid composite honeycomb monolith with 13X zeolite and activated carbon for CO2 capture
Regufe, M. J., Ferreira, A. F. P., LOUREIRO, J. M., Shi, Y., Rodrigues, A. E., & Ribeiro, A. M. (2018) · Adsorption · doi:10.1007/s10450-018-9938-1 · Cited by 82
Iron oxides as efficient sorbents for CO2 capture
Mendoza, E. Y. M., Santos, A. S., López, E. V., Drozd, V., Durygin, A., Chen, J., & Saxena, S. K. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.05.002 · Cited by 82
Guidelines for Techno-Economic Analysis of Adsorption Processes
Danaci, D., Webley, P. A., & Petit, C. (2021) · Frontiers in Chemical Engineering · doi:10.3389/fceng.2020.602430 · Cited by 82
Anyanwu, J.-T., Wang, Y., & Yang, R. T. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131561 · Cited by 82
CO2 capture with polyamine-based protic ionic liquid functionalized mesoporous silica
Zhang, W., Gao, E., Li, Y., Bernards, M. T., He, Y., & Shi, Y. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.08.012 · Cited by 81
Zeolite@Mesoporous silica-supported-amine hybrids for the capture of CO2 in the presence of water
Liu, X., Gao, F., Xu, J. F., Zhou, L., Liu, H., & Hu, J. (2015) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2015.10.006 · Cited by 80
Hejazifar, M., Azizian, S., Sarikhani, H., Li, Q., & Zhao, D. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.06.007 · Cited by 80
Khanmohammadi, H., Bayati, B., Shahrouzi, J. R., Babaluo, A. A., & Ghorbani, A. (2019) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2019.103040 · Cited by 80
Graphene-containing microporous composites for selective CO2 adsorption
Szczęśniak, B., & Choma, J. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.109761 · Cited by 80
González, B., & Manyà, J. J. (2020) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2020.107830 · Cited by 79
Xu, X., Megarajan, S. K., Zhang, Y., & Jiang, H. (2019) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b03873 · Cited by 79
Characteristics of Na–Mg double salt for high-temperature CO2 sorption
Lee, C. H., Mun, S., & Lee, K. B. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.07.082 · Cited by 77
A ZIF-8 decorated TiO2 grid-like film with high CO2 adsorption for CO2 photoreduction
Huang, Z., Dong, P., Zhang, Y., Nie, X., Wang, X., & Zhang, X. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.01.024 · Cited by 77
Mukhtar, A., Mellon, N. B., Saqib, S., Khawar, A., Rafiq, S., Ullah, S., Al-Sehemi, A. G., Babar, M., Bustam, M. A., Khan, W. A., et al. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2019.109883 · Cited by 77
Introducing mesoporosity in zeolite 4A bodies for Rapid CO2 capture
Panda, D., Kumar, E. A., & Singh, S. K. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101223 · Cited by 77
Enhancement of CO2 capture by using synthesized nano-zeolite
Pham, T.-H., Lee, B.-K., Kim, J.-T., & Lee, C.-H. (2016) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2016.04.026 · Cited by 76
Klinthong, W., Huang, C., & Tan, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b00644 · Cited by 76
Metadata
- Authors
- Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R.
- Venue
- Materials Today Sustainability
- Publisher
- Elsevier BV
- Published
- 2023-12
- Volume
- 24
- Pages
- 100483
- ISSN
- 2589-2347 (ISSN-L)
- OpenAlex
- W4385337219
- Cited by
- 302
- References
- 570
- FWCI
- 29.70
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.