The DOI matches its Crossref record; 570 of the 570 references it cites were found in a registry or an index.
CO2 capture materials: a review of current trends and future challenges
Open accessAbstract
Over the last decade, CO2 adsorption technology has quickly gained popularity and is now widely applied in global CCUS projects due to playing an important role in achieving net-zero emissions by 2050. As a result, new materials, or methods of post-modification of those already available have been successively reported to enhance the efficiency of CO2 capture from flue gases. This paper discusses a systematic understanding of fundamental aspects of current research trends is discussed in terms of developing selected CO2 solid adsorbent materials, with a particular emphasis on the upcoming challenges. The adsorbent candidates are reviewed considering the practical drawbacks of imposed by industrial scale and economics, including carbon-based materials, MOFs, polymers, zeolite, silica, alumina, metal oxides, amine-based adsorbents, and other composite porous materials. Solid sorbents derived from biomass, industrial residues, and their thermochemical conversion are also studied due to the high need for cost-effective raw materials and their crucial role in circular economy. Lastly, a techno-economic analysis (TEA) is included to provide the most important criteria that should be considered when adsorbents are implemented on an industrial scale. Consequently, the review is summarized, and recommendations are offered for future research development of CO2 adsorbent materials. The paper aims to establish a comprehensive and fundamental theoretical basis for the characterization of adsorbent technologies currently used to reduce CO2 emissions, along with highlighting the identification and precise articulation of the most important future research paths that could be beneficial to address over the next years.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ordered mesoporous molecular sieves synthesized by a liquid-crystal template mechanism
Kresge, C. T., Leonowicz, M. E., Roth, W. J., Vartuli, J. C., & Beck, J. S. (1992) · Nature · doi:10.1038/359710a0 · Cited by 16,275
Triblock Copolymer Syntheses of Mesoporous Silica with Periodic 50 to 300 Angstrom Pores
Zhao, D., Feng, J., Huo, Q., Melosh, N., Fredrickson, G. H., Chmelka, B. F., & Stucky, G. D. (1998) · Science · doi:10.1126/science.279.5350.548 · Cited by 11,753
A new family of mesoporous molecular sieves prepared with liquid crystal templates
Beck, J. S., Vartuli, J. C., Roth, W. J., Leonowicz, M. E., Kresge, C. T., Schmitt, K. D., Chu, C. T. W., Olson, D. H., Sheppard, E. W., McCullen, S. B., et al. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00053a020 · Cited by 10,967
Graphene-Based Ultracapacitors
Stoller, M. D., Park, S., Zhu, Y., An, J., & Ruoff, R. S. (2008) · Nano Letters · doi:10.1021/nl802558y · Cited by 8,373
Amine Scrubbing for CO 2 Capture
Rochelle, G. T. (2009) · Science · doi:10.1126/science.1176731 · Cited by 4,440
Covalent Organic Frameworks: Design, Synthesis, and Functions
Geng, K., He, T., Liu, R., Dalapati, S., Tan, K. T., Li, Z., Tao, S., Gong, Y., Jiang, Q., & Jiang, D. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00550 · Cited by 4,064
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
Catalytic Properties of Ceria and CeO2-Containing Materials
TROVARELLI, A. (1996) · Catalysis Reviews · doi:10.1080/01614949608006464 · Cited by 3,495
Geldart, D. (1973) · Powder Technology · doi:10.1016/0032-5910(73)80037-3 · Cited by 3,481
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Carbon capture and conversion using metal–organic frameworks and MOF-based materials
Ding, M., Flaig, R. W., Jiang, H.-L., & Yaghi, O. M. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00829a · Cited by 2,616
Furukawa, H., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9015765 · Cited by 2,608
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Yanagisawa, T., Shimizu, T., Kuroda, K., & Kato, C. (1990) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.63.988 · Cited by 1,783
Libra, J. A., Ro, K. S., Kammann, C., Funke, A., Berge, N. D., Neubauer, Y., Titirici, M.-M., Fühner, C., Bens, O., Kern, J., et al. (2011) · Biofuels · doi:10.4155/bfs.10.81 · Cited by 1,756
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Farha, O. K., Özgür Yazaydın, A., Eryazici, I., Malliakas, C. D., Hauser, B. G., Kanatzidis, M. G., Nguyen, S. T., Snurr, R. Q., & Hupp, J. T. (2010) · Nature Chemistry · doi:10.1038/nchem.834 · Cited by 1,741
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
CO2 capture by solid adsorbents and their applications: current status and new trends
Wang, Q., Luo, J., Zhong, Z., & Borgna, A. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00064g · Cited by 1,611
Advances in Conjugated Microporous Polymers
Lee, J.-S. M., & Cooper, A. I. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00399 · Cited by 1,394
Wang, T., Zhai, Y., Zhu, Y., Li, C., & Zeng, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.071 · Cited by 1,365
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Covalent Organic Frameworks for CO2 Capture
Zeng, Y., Zou, R., & Zhao, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505004 · Cited by 1,140
Bourrelly, S., Llewellyn, P. L., Serre, C., Millange, F., Loiseau, T., & Férey, G. (2005) · Journal of the American Chemical Society · doi:10.1021/ja054668v · Cited by 1,105
Abiotic and microbial oxidation of laboratory-produced black carbon (biochar)
Zimmerman, A. R. (2010) · Environmental Science & Technology · doi:10.1021/es903140c · Cited by 1,103
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
Conjugated Microporous Polymers
Cooper, A. I. (2009) · Advanced Materials · doi:10.1002/adma.200801971 · Cited by 1,031
The biocompatibility of carbon nanotubes
Smart, S. K., Cassady, A. I., Lu, G. Q., & Martin, D. J. (2006) · Carbon · doi:10.1016/j.carbon.2005.10.011 · Cited by 1,011
Exceptional ammonia uptake by a covalent organic framework
Doonan, C. J., Tranchemontagne, D. J., Glover, T. G., Hunt, J. R., & Yaghi, O. M. (2010) · Nature Chemistry · doi:10.1038/nchem.548 · Cited by 999
Air pollution, greenhouse gases and climate change: Global and regional perspectives
Ramanathan, V., & Feng, Y. (2009) · Atmospheric Environment · doi:10.1016/j.atmosenv.2008.09.063 · Cited by 977
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Anderson, T. R., Hawkins, E., & Jones, P. D. (2016) · Endeavour · doi:10.1016/j.endeavour.2016.07.002 · Cited by 929
Recent advances in utilization of biochar
Qian, K., Kumar, A., Zhang, H., Bellmer, D., & Huhnke, R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.10.074 · Cited by 915
Characterization methods of carbon nanotubes: a review
Belin, T., & Epron, F. (2005) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2005.02.046 · Cited by 885
Jiang, J.-X., Su, F., Trewin, A., Wood, C. D., Niu, H., Jones, J. T. A., Khimyak, Y. Z., & Cooper, A. I. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8010176 · Cited by 879
Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A
Saha, D., Bao, Z., Jia, F., & Deng, S. (2010) · Environmental Science & Technology · doi:10.1021/es9032309 · Cited by 816
Polymer nanosieve membranes for CO2-capture applications
Du, N., Park, H. B., Robertson, G. P., Dal-Cin, M. M., Visser, T., Scoles, L., & Guiver, M. D. (2011) · Nature Materials · doi:10.1038/nmat2989 · Cited by 805
Capture and conversion of CO2 at ambient conditions by a conjugated microporous polymer
Xie, Y., Wang, T.-T., Liu, X.-H., Zou, K., & Deng, W.-Q. (2013) · Nature Communications · doi:10.1038/ncomms2960 · Cited by 772
Dreyer, D. R., Ruoff, R. S., & Bielawski, C. W. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201003024 · Cited by 770
Yu, J. C., Zhang, L., Zheng, Z. G., & Zhao, J. (2003) · Chemistry of Materials · doi:10.1021/cm0340781 · Cited by 752
Graphene-based materials: Synthesis and gas sorption, storage and separation
Gadipelli, S., & Guo, Z. X. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.10.004 · Cited by 734
Promises, facts and challenges for graphene in biomedical applications
Reina, G., González-Domínguez, J. M., Criado, A., Vázquez, E., Bianco, A., & Prato, M. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00363c · Cited by 725
Rathi, B. S., & Kumar, P. S. (2021) · Environmental Pollution · doi:10.1016/j.envpol.2021.116995 · Cited by 723
Conversion Limits in the Reaction of CO2with Lime
Abanades, J. C., & Alvarez, D. (2003) · Energy & Fuels · doi:10.1021/ef020152a · Cited by 716
Insights into Biochar and Hydrochar Production and Applications: A Review
Zhang, Z., Zhu, Z., Shen, B., & Liu, L. (2019) · Energy · doi:10.1016/j.energy.2019.01.035 · Cited by 687
Insight into activated carbon from different kinds of chemical activating agents: A review
Gao, Y., Yue, Q., Gao, B., & Li, A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141094 · Cited by 681
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Effect of the product layer on the kinetics of the CO2‐lime reaction
Bhatia, S. K., & Perlmutter, D. D. (1983) · AIChE Journal · doi:10.1002/aic.690290111 · Cited by 657
Carbon based materials: a review of adsorbents for inorganic and organic compounds
Sabzehmeidani, M. M., Mahnaee, S., Ghaedi, M., Heidari, H., & Roy, V. A. L. (2021) · Materials Advances · doi:10.1039/d0ma00087f · Cited by 646
Post‐Synthetic Modification of Metal–Organic Frameworks Toward Applications
Mandal, S., Natarajan, S., Mani, P., & Pankajakshan, A. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202006291 · Cited by 643
Adsorptive removal of carbon dioxide using polyethyleneimine-loaded mesoporous silica materials
Son, W.-J., Choi, J.-S., & Ahn, W.-S. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.10.049 · Cited by 618
Zhang, Z., Zhao, Y., Gong, Q., Li, Z., & Li, J. (2013) · Chem. Commun. · doi:10.1039/c2cc35561b · Cited by 609
Minireview of potential applications of hydrochar derived from hydrothermal carbonization of biomass
Fang, J., Zhan, L., Ok, Y. S., & Gao, B. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.08.026 · Cited by 600
Microporous organic polymers for carbon dioxide capture
Dawson, R., Stöckel, E., Holst, J. R., Adams, D. J., & Cooper, A. I. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01971f · Cited by 590
Idem, R., Wilson, M., Tontiwachwuthikul, P., Chakma, A., Veawab, A., Aroonwilas, A., & Gelowitz, D. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050569e · Cited by 587
Chemical tuning of CO2 sorption in robust nanoporous organic polymers
Dawson, R., Adams, D. J., & Cooper, A. I. (2011) · Chemical Science · doi:10.1039/c1sc00100k · Cited by 568
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Carbon nanotubes: synthesis, properties and engineering applications
Gupta, N., Gupta, S. M., & Sharma, S. K. (2019) · Carbon Letters · doi:10.1007/s42823-019-00068-2 · Cited by 559
Adsorption of CO2 and CH4 on a magnesium-based metal organic framework
Bao, Z., Yu, L., Ren, Q., Lu, X., & Deng, S. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2010.09.065 · Cited by 527
Opportunities and challenges in carbon dioxide capture
Spigarelli, B. P., & Kawatra, S. K. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.03.002 · Cited by 512
Kumar, S., Jain, S., Nehra, M., Dilbaghi, N., Marrazza, G., & Kim, K.-H. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213407 · Cited by 498
Application of natural zeolites in the purification and separation of gases
Ackley, M. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00353-6 · Cited by 494
Biochar-based adsorbents for carbon dioxide capture: a critical review
Dissanayake, P. D., You, S., Igalavithana, A. D., Xia, Y., Bhatnagar, A., Gupta, S., Kua, H. W., Kim, S., Kwon, J.-H., Tsang, D. C. W., et al. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109582 · Cited by 489
Chen, B., Ma, S., Zapata, F., Fronczek, F. R., Lobkovsky, E. B., & Zhou, H.-C. (2007) · Inorganic Chemistry · doi:10.1021/ic0616434 · Cited by 480
A comprehensive review on physical activation of biochar for energy and environmental applications
Sajjadi, B., Chen, W.-Y., & Egiebor, N. O. (2019) · Reviews in Chemical Engineering · doi:10.1515/revce-2017-0113 · Cited by 475
Recent advances in the synthesis of hierarchically nanoporous zeolites
Na, K., Choi, M., & Ryoo, R. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.03.054 · Cited by 467
Li, B., Zhang, Y., Krishna, R., Yao, K., Han, Y., Wu, Z., Ma, D., Shi, Z., Pham, T., Space, B., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja502119z · Cited by 455
A Perspective on Mesoporous TiO2 Materials
Li, W., Wu, Z., Wang, J., Elzatahry, A. A., & Zhao, D. (2014) · Chemistry of Materials · doi:10.1021/cm4014859 · Cited by 454
CO2Adsorption-Based Separation by Metal Organic Framework (Cu-BTC) versus Zeolite (13X)
Liang, Z., Marshall, M., & Chaffee, A. L. (2009) · Energy & Fuels · doi:10.1021/ef800938e · Cited by 445
Sevilla, M., Maciá-Agulló, J. A., & Fuertes, A. B. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.04.032 · Cited by 438
Hierarchically structured zeolites: synthesis, mass transport properties and applications
Chen, L.-H., Li, X.-Y., Rooke, J. C., Zhang, Y.-H., Yang, X.-Y., Tang, Y., Xiao, F.-S., & Su, B.-L. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31957h · Cited by 433
Production of activated carbon from coconut shell: Optimization using response surface methodology
Gratuito, M. K. B., Panyathanmaporn, T., Chumnanklang, R.-A., Sirinuntawittaya, N., & Dutta, A. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.09.042 · Cited by 429
CO2 Capture by As‐Prepared SBA‐15 with an Occluded Organic Template
Yue, M. B., Chun, Y., Cao, Y., Dong, X., & Zhu, J. H. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600427 · Cited by 424
Comparative Study of CO2 Capture by Carbon Nanotubes, Activated Carbons, and Zeolites
Lu, C., Bai, H., Wu, B., Su, F., & Hwang, J. F. (2008) · Energy & Fuels · doi:10.1021/ef8000086 · Cited by 422
Younas, M., Rezakazemi, M., Daud, M., Wazir, M. B., Ahmad, S., Ullah, N., Inamuddin, & Ramakrishna, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100849 · Cited by 421
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Adsorption by Powders and Porous Solids
(2014) · Elsevier eBooks · doi:10.1016/c2010-0-66232-8 · Cited by 411
Catalytic properties and biomedical applications of cerium oxide nanoparticles
Walkey, C., Das, S., Seal, S., Erlichman, J., Heckman, K., Ghibelli, L., Traversa, E., McGinnis, J. F., & Self, W. T. (2015) · Environmental Science: Nano · doi:10.1039/c4en00138a · Cited by 410
Utilization of zeolites as CO2 capturing agents: Advances and future perspectives
Kumar, S., Srivastava, R., & Koh, J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101251 · Cited by 405
Advances in porous organic polymers: syntheses, structures, and diverse applications
Mohamed, M. G., EL-Mahdy, A. F. M., Kotp, M. G., & Kuo, S.-W. (2022) · Materials Advances · doi:10.1039/d1ma00771h · Cited by 402
Physical and chemical aspects of adsorbents and catalysts
Walker, P. L. (1970) · Carbon · doi:10.1016/0008-6223(70)90065-5 · Cited by 399
Serafin, J., Narkiewicz, U., Morawski, A. W., Wróbel, R. J., & Michalkiewicz, B. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.01.006 · Cited by 393
Self-citationPetrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2021) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110751 · Cited by 381
Lv, Y., Zhang, F., Dou, Y., Zhai, Y., Wang, J., Liu, H., Xia, Y., Tu, B., & Zhao, D. (2012) · J. Mater. Chem. · doi:10.1039/c1jm12742j · Cited by 373
Xu, J., Chen, L., Qu, H., Jiao, Y., Xie, J., & Xing, G. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.08.178 · Cited by 370
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
Pu, Y., Luo, Y., Wei, X., Sun, J., Li, L., Zou, W., & Dong, L. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.04.093 · Cited by 359
Review on CO2 capture by blended amine solutions
Aghel, B., Janati, S., Wongwises, S., & Shadloo, M. S. (2022) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2022.103715 · Cited by 358
Trends in Solid Adsorbent Materials Development for CO 2 Capture
Pardakhti, M., Jafari, T., Tobin, Z., Dutta, B., Moharreri, E., Shemshaki, N. S., Suib, S., & Srivastava, R. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b08487 · Cited by 357
Charged Covalent Triazine Frameworks for CO2 Capture and Conversion
Buyukcakir, O., Je, S. H., Talapaneni, S. N., Kim, D., & Coskun, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16769 · Cited by 356
Advances in principal factors influencing carbon dioxide adsorption on zeolites
Bonenfant, D., Kharoune, M., Niquette, P., Mimeault, M., & Hausler, R. (2008) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/9/1/013007 · Cited by 351
Activated Carbon, Biochar and Charcoal: Linkages and Synergies across Pyrogenic Carbon’s ABCs
Hagemann, N., Spokas, K., Schmidt, H.-P., Kägi, R., Böhler, M., & Bucheli, T. (2018) · Water · doi:10.3390/w10020182 · Cited by 342
Recent Progress on Titanium Dioxide Nanomaterials for Photocatalytic Applications
Nasr, M., Eid, C., Habchi, R., Miele, P., & Bechelany, M. (2018) · ChemSusChem · doi:10.1002/cssc.201800874 · Cited by 340
Ceria in catalysis: From automotive applications to the water–gas shift reaction
Gorte, R. J. (2010) · AIChE Journal · doi:10.1002/aic.12234 · Cited by 339
Sun, H., Wang, J., Zhao, J., Shen, B., Shi, J., Huang, J., & Wu, C. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.11.040 · Cited by 336
Shafeeyan, M. S., Daud, W. M. A. W., Houshmand, A., & Arami-Niya, A. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2010.11.127 · Cited by 328
Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity
Alabadi, A., Razzaque, S., Yang, Y., Chen, S., & Tan, B. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.06.032 · Cited by 322
Coromina, H. M., Walsh, D. A., & Mokaya, R. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta09202g · Cited by 321
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
Activated carbons from biomass-based sources for CO2 capture applications
Abuelnoor, N., AlHajaj, A., Khaleel, M., Vega, L. F., & Abu-Zahra, M. R. M. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131111 · Cited by 310
Carbon dioxide capture in amorphous porous organic polymers
Wang, W., Zhou, M., & Yuan, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09234a · Cited by 307
Preparation of activated carbon from bituminous coal with phosphoric acid activation
Teng, H., Yeh, T.-S., & Hsu, L.-Y. (1998) · Carbon · doi:10.1016/s0008-6223(98)00127-4 · Cited by 296
Zhi, Y., Shao, P., Feng, X., Xia, H., Zhang, Y., Shi, Z., Mu, Y., & Liu, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta08629f · Cited by 294
Preparation and enhanced CO2 adsorption capacity of UiO-66/graphene oxide composites
Cao, Y., Zhao, Y., Lv, Z., Song, F., & Zhong, Q. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.12.021 · Cited by 290
Milner, P. J., Siegelman, R. L., Forse, A. C., Gonzalez, M. I., Runčevski, T., Martell, J. D., Reimer, J. A., & Long, J. R. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07612 · Cited by 288
Zhang, X., Zhang, S., Yang, H., Feng, Y., Chen, Y., Wang, X., & Chen, H. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.07.024 · Cited by 285
A review of N-functionalized solid adsorbents for post-combustion CO2 capture
Hu, X. (., Liu, L., Luo, X., Xiao, G., Shiko, E., Zhang, R., Fan, X., Zhou, Y., Liu, Y., Zeng, Z., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.114244 · Cited by 282
Activated carbon preparation from biomass feedstock: Clean production and carbon dioxide adsorption
Ahmed, M. B., Hasan Johir, M. A., Zhou, J. L., Ngo, H. H., Nghiem, L. D., Richardson, C., Moni, M. A., & Bryant, M. R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.342 · Cited by 281
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Liu, W.-J., Jiang, H., Tian, K., Ding, Y.-W., & Yu, H.-Q. (2013) · Environmental Science & Technology · doi:10.1021/es401286p · Cited by 276
Development of hybrid amine-functionalized MCM-41 sorbents for CO2 capture
Wang, X., Chen, L., & Guo, Q. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.08.107 · Cited by 275
Enhancement of CaO for CO2 capture in an FBC environment
Salvador, C., Lu, D., Anthony, E. J., & Abanades, J. C. (2003) · Chemical Engineering Journal · doi:10.1016/j.cej.2003.08.011 · Cited by 273
Li, H., Zheng, F., Wang, J., Zhou, J., Huang, X., Chen, L., Hu, P., Gao, J.-M., Zhen, Q., Bashir, S., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124513 · Cited by 270
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
CO2 adsorption on branched polyethyleneimine-impregnated mesoporous silica SBA-15
Sanz, R., Calleja, G., Arencibia, A., & Sanz-Pérez, E. S. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2009.12.070 · Cited by 269
Strategic use of biochar for CO2 capture and sequestration
Jung, S., Park, Y.-K., & Kwon, E. E. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.04.012 · Cited by 268
The N-doped activated carbon derived from sugarcane bagasse for CO2 adsorption
Han, J., Zhang, L., Zhao, B., Qin, L., Wang, Y., & Xing, F. (2019) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.11.028 · Cited by 267
Exploring the properties and applications of nanoceria: is there still plenty of room at the bottom?
Reed, K., Cormack, A., Kulkarni, A., Mayton, M., Sayle, D., Klaessig, F., & Stadler, B. (2014) · Environ. Sci.: Nano · doi:10.1039/c4en00079j · Cited by 265
Benzimidazole-based hyper-cross-linked poly(ionic liquid)s for efficient CO2 capture and conversion
Sang, Y., & Huang, J. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123973 · Cited by 264
Si, X., Jiao, C., Li, F., Zhang, J., Wang, S., Liu, S., Li, Z., Sun, L., Xu, F., Gabelica, Z., et al. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01380g · Cited by 262
Salaudeen, S. A., Acharya, B., & Dutta, A. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.11.012 · Cited by 253
CO2 capture and storage: are we ready?
Orr, Jr. (2009) · Energy & Environmental Science · doi:10.1039/b822107n · Cited by 252
A versatile metal–organic framework for carbon dioxide capture and cooperative catalysis
Park, J., Li, J.-R., Chen, Y.-P., Yu, J., Yakovenko, A. A., Wang, Z. U., Sun, L.-B., Balbuena, P. B., & Zhou, H.-C. (2012) · Chemical Communications · doi:10.1039/c2cc34622b · Cited by 249
Hydrothermal carbonization (HTC) of selected woody and herbaceous biomass feedstocks
Hoekman, S. K., Broch, A., Robbins, C., Zielinska, B., & Felix, L. (2013) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-012-0066-y · Cited by 246
Huang, G.-G., Liu, Y.-F., Wu, X.-X., & Cai, J.-J. (2019) · New Carbon Materials · doi:10.1016/s1872-5805(19)60014-4 · Cited by 246
Li, H., Chen, X., Shen, D., Wu, F., Pleixats, R., & Pan, J. (2021) · Nanoscale · doi:10.1039/d1nr04048k · Cited by 245
Zhang, C., Song, W., Ma, Q., Xie, L., Zhang, X., & Guo, H. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02764 · Cited by 244
Tailored Porous Organic Polymers for Task-Specific Water Purification
Sun, Q., Aguila, B., Song, Y., & Ma, S. (2020) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00007 · Cited by 244
Manyà, J. J., González, B., Azuara, M., & Arner, G. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.01.092 · Cited by 240
Conjugated Microporous Poly(aryleneethynylene) Networks
Jiang, J., Su, F., Trewin, A., Wood, C. D., Campbell, N. L., Niu, H., Dickinson, C., Ganin, A. Y., Rosseinsky, M. J., Khimyak, Y. Z., et al. (2007) · Angewandte Chemie · doi:10.1002/ange.200701595 · Cited by 240
Determination of the optimal pore size for improved CO2 adsorption in activated carbon fibers
Lee, S.-Y., & Park, S.-J. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2012.09.018 · Cited by 239
Progress in hydrotalcite like compounds and metal-based oxides for CO2 capture: a review
Bhatta, L. K. G., Subramanyam, S., Chengala, M. D., Olivera, S., & Venkatesh, K. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.12.059 · Cited by 235
Covalent Organic Framework with Frustrated Bonding Network for Enhanced Carbon Dioxide Storage
Gao, Q., Li, X., Ning, G.-H., Xu, H.-S., Liu, C., Tian, B., Tang, W., & Loh, K. P. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00117 · Cited by 234
Plaza, M. G., González, A. S., Pis, J. J., Rubiera, F., & Pevida, C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.09.058 · Cited by 233
A Triply Interpenetrated Microporous Metal−Organic Framework for Selective Sorption of Gas Molecules
Chen, B., Ma, S., Hurtado, E. J., Lobkovsky, E. B., & Zhou, H.-C. (2007) · Inorganic Chemistry · doi:10.1021/ic7014034 · Cited by 232
CO2 adsorption over ion-exchanged zeolite beta with alkali and alkaline earth metal ions
Yang, S.-T., Kim, J., & Ahn, W.-S. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.06.015 · Cited by 232
International comparison of CO2 emission trends in the iron and steel industry
Kim, Y., & Worrell, E. (2002) · Energy Policy · doi:10.1016/s0301-4215(01)00130-6 · Cited by 231
Porous Organic Polymers Containing Active Metal Centers as Catalysts for Synthetic Organic Chemistry
Kramer, S., Bennedsen, N. R., & Kegnæs, S. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b01167 · Cited by 228
Hu, X., Radosz, M., Cychosz, K. A., & Thommes, M. (2011) · Environmental Science & Technology · doi:10.1021/es200782s · Cited by 224
The reactivity of calcium oxide towards carbon dioxide and its use for energy storage
Barker, R. (1974) · Journal of Applied Chemistry and Biotechnology · doi:10.1002/jctb.2720240405 · Cited by 224
Zanco, S. E., Pérez-Calvo, J.-F., Gasós, A., Cordiano, B., Becattini, V., & Mazzotti, M. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00002 · Cited by 219
Ordered mesoporous silica (OMS) as an adsorbent and membrane for separation of carbon dioxide (CO2)
Chew, T.-L., Ahmad, A. L., & Bhatia, S. (2010) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2009.12.001 · Cited by 218
Synthesis of mesoporous magnesium oxide: Its application to CO2 chemisorption
Bhagiyalakshmi, M., Lee, J. Y., & Jang, H. T. (2010) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.08.001 · Cited by 217
Development of low-cost biomass-based adsorbents for postcombustion CO2 capture
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Casal, M. D., Martín, C. F., Rubiera, F., & Pis, J. J. (2009) · Fuel · doi:10.1016/j.fuel.2009.02.025 · Cited by 216
Yanagisawa, T., Shimizu, T., Kuroda, K., & Kato, C. (1990) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.63.1535 · Cited by 216
Abd, A. A., Othman, M. R., & Kim, J. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-15121-9 · Cited by 216
Vacuum-assisted synthesis of graphene from thermal exfoliation and reduction of graphite oxide
Zhang, H.-B., Wang, J.-W., Yan, Q., Zheng, W.-G., Chen, C., & Yu, Z.-Z. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm10099h · Cited by 215
Functional conjugated microporous polymers: from 1,3,5-benzene to 1,3,5-triazine
Ren, S., Dawson, R., Laybourn, A., Jiang, J.-X., Khimyak, Y., Adams, D. J., & Cooper, A. I. (2012) · Polymer Chemistry · doi:10.1039/c2py00585a · Cited by 215
Preparation of porous carbons with high low-pressure CO2 uptake by KOH activation of rice husk char
Li, D., Ma, T., Zhang, R., Tian, Y., & Qiao, Y. (2015) · Fuel · doi:10.1016/j.fuel.2014.08.027 · Cited by 214
Serna-Guerrero, R., Belmabkhout, Y., & Sayari, A. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.04.024 · Cited by 214
Rashidi, N. A., & Yusup, S. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.09.045 · Cited by 214
Porous Organic Polymers for CO2 Storage and Conversion Reactions
Bhanja, P., Modak, A., & Bhaumik, A. (2019) · ChemCatChem · doi:10.1002/cctc.201801046 · Cited by 214
Wade, C. R., & Dincă, M. (2012) · Dalton Transactions · doi:10.1039/c2dt30372h · Cited by 210
Bedia, J., Peñas-Garzón, M., Gómez-Avilés, A., Rodriguez, J. J., & Belver, C. (2018) · C · doi:10.3390/c4040063 · Cited by 210
Design of highly microporous activated carbons based on walnut shell biomass for H2 and CO2 storage
Serafin, J., Dziejarski, B., Cruz Junior, O. F., & Sreńscek-Nazzal, J. (2023) · Carbon · doi:10.1016/j.carbon.2022.09.013 · Cited by 210
Self-citationDong, B., Wang, L., Zhao, S., Ge, R., Song, X., Wang, Y., & Gao, Y. (2016) · Chemical Communications · doi:10.1039/c6cc03058k · Cited by 209
Zagho, M. M., Hassan, M. K., Khraisheh, M., Al-Maadeed, M. A. A., & Nazarenko, S. (2021) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2021.100091 · Cited by 209
Petrovic, B., Gorbounov, M., & Masoudi Soltani, S. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100045 · Cited by 208
Equilibrium CO2 adsorption on zeolite 13X prepared from natural clays
Garshasbi, V., Jahangiri, M., & Anbia, M. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.09.161 · Cited by 207
CO2 capture by adsorption on biomass-derived activated char: A review.
Goel, C., Mohan, S., & Dinesha, P. (2021) · Science of the Total Environment · doi:10.1016/j.scitotenv.2021.149296 · Cited by 206
Amine–silica composites for CO2 capture: A short review
Chen, C., Zhang, S., Row, K. H., & Ahn, W.-S. (2017) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.07.001 · Cited by 206
CO2 capture using zeolite 13X prepared from bentonite
Chen, C., Park, D.-W., & Ahn, W.-S. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2013.11.064 · Cited by 205
Process effects on activated carbon with large specific surface area from corn cob
CAO, Q., XIE, K., LV, Y., & BAO, W. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.02.026 · Cited by 204
Belmabkhout, Y., Serna-Guerrero, R., & Sayari, A. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.03.017 · Cited by 202
Aworn, A., Thiravetyan, P., & Nakbanpote, W. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.04.007 · Cited by 200
Lahijani, P., Mohammadi, M., & Mohamed, A. R. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2018.05.018 · Cited by 200
Li, M., & Xiao, R. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.12.015 · Cited by 198
Coconut shell-based microporous carbons for CO2 capture
Ello, A. S., de Souza, L. K. C., Trokourey, A., & Jaroniec, M. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.07.008 · Cited by 197
Wang, L., Jin, P., Huang, J., She, H., & Wang, Q. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b03773 · Cited by 196
Heidari, A., Younesi, H., Rashidi, A., & Ghoreyshi, A. (2014) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2013.06.007 · Cited by 195
Li, L., King, D. L., Nie, Z., & Howard, C. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie901166b · Cited by 195
Progress in the development and application of CaO-based adsorbents for CO2 capture—a review
Sun, H., Wu, C., Shen, B., Zhang, X., Zhang, Y., & Huang, J. (2018) · Materials Today Sustainability · doi:10.1016/j.mtsust.2018.08.001 · Cited by 194
Sangchoom, W., & Mokaya, R. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00351 · Cited by 193
Wen, H.-M., Liao, C., Li, L., Alsalme, A., Alothman, Z., Krishna, R., Wu, H., Zhou, W., Hu, J., & Chen, B. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta11596f · Cited by 193
Zhang, W., Liu, H., Sun, Y., Cakstins, J., Sun, C., & Snape, C. E. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.01.049 · Cited by 192
Hakim, A., Marliza, T. S., Abu Tahari, N. M., Wan Isahak, R. W. N., Yusop, R. M., Mohamed Hisham, W. M., & Yarmo, A. M. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04091 · Cited by 192
APTES grafted ordered mesoporous silica KIT-6 for CO2 adsorption
Kishor, R., & Ghoshal, A. K. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.10.039 · Cited by 191
Gao, W., Zhou, T., & Wang, Q. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.025 · Cited by 191
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Kılıç, M., Apaydın-Varol, E., & Pütün, A. E. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.07.155 · Cited by 187
Jiang, J., Trewin, A., Su, F., et al. (2009) · Macromolecules · doi:10.1021/ma802625d · Cited by 186
Ultrahigh CO2 adsorption capacity on carbon molecular sieves at room temperature
Silvestre-Albero, J., Wahby, A., Sepúlveda-Escribano, A., Martínez-Escandell, M., Kaneko, K., & Rodríguez-Reinoso, F. (2011) · Chemical Communications · doi:10.1039/c1cc11618e · Cited by 184
Biochar – Recovery Material from Pyrolysis of Sewage Sludge: A Review
Raček, J., Sevcik, J., Chorazy, T., Kučerík, J., & Hlavínek, P. (2019) · Waste and Biomass Valorization · doi:10.1007/s12649-019-00679-w · Cited by 183
Karacan, F., Ozden, U., & Karacan, S. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.02.046 · Cited by 182
Kayal, S., & Chakraborty, A. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.080 · Cited by 182
MgO/Al2O3 Sorbent for CO2 Capture
Li, L., Wen, X., Fu, X., Wang, F., Zhao, N., Xiao, F., Wei, W., & Sun, Y. (2010) · Energy & Fuels · doi:10.1021/ef100817f · Cited by 178
A comparison of the CO2 capture characteristics of zeolites and metal–organic frameworks
Krishna, R., & van Baten, J. M. (2012) · Separation and Purification Technology · doi:10.1016/j.seppur.2011.11.031 · Cited by 176
Elhenawy, S. E. M., Khraisheh, M., AlMomani, F., & Walker, G. (2020) · Catalysts · doi:10.3390/catal10111293 · Cited by 176
Highly Selective CO2 Capture by a Flexible Microporous Metal–Organic Framework (MMOF) Material
Wu, H., Reali, R. S., Smith, D. A., Trachtenberg, M. C., & Li, J. (2010) · Chemistry – A European Journal · doi:10.1002/chem.201002683 · Cited by 175
Evaluation of Activated Carbon Adsorbents for CO2Capture in Gasification
Drage, T. C., Blackman, J. M., Pevida, C., & Snape, C. E. (2009) · Energy & Fuels · doi:10.1021/ef8010614 · Cited by 175
A facile synthesis of microporous organic polymers for efficient gas storage and separation
Liu, G., Wang, Y., Shen, C., Ju, Z., & Yuan, D. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05349d · Cited by 175
Behavior of CaTiO3/Nano-CaO as a CO2 Reactive Adsorbent
Wu, S. F., & Zhu, Y. Q. (2010) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900900r · Cited by 175
Recent advances and progress in the development of graphene-based adsorbents for CO2 capture
Balasubramanian, R., & Chowdhury, S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04822b · Cited by 174
Novel Nitrogen-Doped Porous Carbons Derived from Graphene for Effective CO2 Capture
An, L., Liu, S., Wang, L., Wu, J., Wu, Z., Ma, C., Yu, Q., & Hu, X. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b06122 · Cited by 173
Li, H., Li, J., Thomas, A., & Liao, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904785 · Cited by 173
Adsorption equilibrium and kinetics for SO2, NO, CO2 on zeolites FAU and LTA
Yi, H., Deng, H., Tang, X., Yu, Q., Zhou, X., & Liu, H. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.11.091 · Cited by 172
A computational study of CO2, N2, and CH4 adsorption in zeolites
García-Pérez, E., Parra, J. B., Ania, C. O., García-Sánchez, A., van Baten, J. M., Krishna, R., Dubbeldam, D., & Calero, S. (2007) · Adsorption · doi:10.1007/s10450-007-9039-z · Cited by 171
Fan, W., Wang, X., Liu, X., Xu, B., Zhang, X., Wang, W., Wang, X., Wang, Y., Dai, F., Yuan, D., et al. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04783 · Cited by 170
Metadata
- Authors
- Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R.
- Venue
- Materials Today Sustainability
- Publisher
- Elsevier BV
- Published
- 2023-12
- Volume
- 24
- Pages
- 100483
- ISSN
- 2589-2347 (ISSN-L)
- OpenAlex
- W4385337219
- Cited by
- 302
- References
- 570
- FWCI
- 29.70
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.