The DOI matches its Crossref record; 184 of the 184 references it cites were found in a registry or an index.
Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review
Open accessAbstract
Abstract Significant progress has been made in understanding selective laser melting (SLM) process as well as fabrication of various materials using this technology. This paper covers the emerging research on particle reinforced metal matrix nanocomposites (MMNCs) with SLM and provides a comprehensive overview of the underlying scientific topics behind them. In order to provide a thorough basis for understanding and controlling of the SLM processing of MMNCs fabrication, the state of the art research from the perspective of materials and SLM processing parameters is reviewed. Feedstock preparation methods for MMNCs are emphasized and compared in detail. Mechanical properties of nanocomposites and the enhancing mechanisms due to reinforcement are discussed in depth, highlighting strength, microhardness and fatigue properties. Thereafter, defects, especially those associated with SLM processing, are also elucidated by discussing their classification, mechanisms of formation and tendency in MMNCs. Applications in aerospace, automobile, electronics and electronic packaging, and biomedical industry are illustrated. Summary of findings from this review and trends for future research in the development of MMNCs by SLM are addressed in the final section.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Suresh, S. (1998) · Cambridge University Press eBooks · doi:10.1017/cbo9780511806575 · Cited by 4,526
Mechanical Alloying And Milling
Suryanarayana, C. (2004) · CRC Press eBooks · doi:10.1201/9780203020647 · Cited by 3,882
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
An Introduction to Composite Materials
Clyne, T. W., & Hull, D. (2019) · Cambridge University Press eBooks · doi:10.1017/9781139050586 · Cited by 3,018
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Ceramic materials for thermal barrier coatings
Cao, X., Vaßen, R., & Stoever, D. (2003) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(03)00129-8 · Cited by 2,379
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Self-citationResidual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Effective thermal conductivity of particulate composites with interfacial thermal resistance
Nan, C.-W., Birringer, R., Clarke, D. R., & Gleiter, H. (1997) · Journal of Applied Physics · doi:10.1063/1.365209 · Cited by 2,009
Metal matrix composites – From science to technological significance
Miracle, D. B. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.05.027 · Cited by 1,921
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Particulate reinforced metal matrix composites — a review
Ibrahim, I. A., Mohamed, F. A., & Lavernia, E. J. (1991) · Journal of Materials Science · doi:10.1007/bf00544448 · Cited by 1,767
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
An Introduction to Composite Materials
Hull, D., & Clyne, T. W. (1996) · Cambridge University Press eBooks · doi:10.1017/cbo9781139170130 · Cited by 1,450
Reducing porosity in AlSi10Mg parts processed by selective laser melting
Aboulkhair, N. T., Everitt, N. M., Ashcroft, I., & Tuck, C. (2014) · Additive Manufacturing · doi:10.1016/j.addma.2014.08.001 · Cited by 1,281
Read, N., Wang, W., Essa, K., & Attallah, M. M. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.09.044 · Cited by 1,218
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Nanostructured high-strength molybdenum alloys with unprecedented tensile ductility
Liu, G., Zhang, G., Jiang, F., et al. (2013) · Nature Materials · doi:10.1038/nmat3544 · Cited by 1,122
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Qiu, C., Panwisawas, C., Ward, R., Basoalto, H., Brooks, J. W., & Attallah, M. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.004 · Cited by 1,041
Material properties of titanium diboride
Munro, R. G. (2000) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.105.057 · Cited by 948
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Self-citationSelective laser melting of aluminium components
Louvis, E., Fox, P., & Sutcliffe, C. J. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.09.019 · Cited by 933
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Yang, J., Yu, H., Yin, J., Gao, M. X., Wang, Z., & Zeng, X. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.06.117 · Cited by 913
Li, X., Ji, G., Chen, Z., Addad, A., Wu, Y. X., Wang, H., Vleugels, J., Humbeeck, J. V., & Kruth, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.02.062 · Cited by 893
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Li, W., Li, S., Liu, J., Zhang, A., Zhou, Y., Wei, Q., Yan, C., & Shi, Y. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.03.088 · Cited by 850
Single track formation in selective laser melting of metal powders
Yadroitsev, I., Gusarov, A., Yadroitsava, I., & Smurov, I. (2010) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.05.010 · Cited by 827
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
Cherry, J. A., Davies, H. M., Mehmood, S., Lavery, N. P., Brown, S. G. R., & Sienz, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6297-2 · Cited by 755
Mechanically alloyed nanocomposites
Suryanarayana, C., & Al-Aqeeli, N. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.10.001 · Cited by 750
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Kasperovich, G., & Hausmann, J. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.025 · Cited by 735
Balling behavior of stainless steel and nickel powder during selective laser melting process
Li, R., Liu, J., Shi, Y., Wang, L., & Jiang, W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3566-1 · Cited by 722
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Aluminum Metal-Matrix Composites for Automotive Applications: Tribological Considerations
Prasad, S. V., & Asthana, R. (2004) · Tribology Letters · doi:10.1023/b:tril.0000044492.91991.f3 · Cited by 703
Thijs, L., Montero Sistiaga, M. L., Wauthle, R., Xie, Q., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.036 · Cited by 672
Gu, D., & Shen, Y. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.01.013 · Cited by 672
Biodegradable magnesium–hydroxyapatite metal matrix composites
Witte, F., Feyerabend, F., Maier, P., Fischer, J., Störmer, M., Blawert, C., Dietzel, W., & Hort, N. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.12.027 · Cited by 642
Metal-matrix composites for space applications
Rawal, S. P. (2001) · JOM · doi:10.1007/s11837-001-0139-z · Cited by 639
Sun, Z., Tan, X., Tor, S. B., & Chua, C. K. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0018-5 · Cited by 627
Self-citationNovel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties
Tjong, S. C. (2007) · Advanced Engineering Materials · doi:10.1002/adem.200700106 · Cited by 619
Qi, H., Azer, M. N., & Ritter, A. M. (2009) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-009-9949-3 · Cited by 618
Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg
Weingarten, C., Buchbinder, D., Pirch, N., Meiners, W., Wissenbach, K., & Poprawe, R. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.013 · Cited by 585
Attar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Direct selective laser sintering of metals
Agarwala, M., Bourell, D., Beaman, J., Marcus, H., & Barlow, J. (1995) · Rapid Prototyping Journal · doi:10.1108/13552549510078113 · Cited by 571
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.01.018 · Cited by 553
Metal Matrix Composites: Custom‐made Materials for Automotive and Aerospace Engineering
(2006) · Wiley eBooks · doi:10.1002/3527608117 · Cited by 529
Microstructure Characteristics of Inconel 625 Superalloy Manufactured by Selective Laser Melting
Li, S., Wei, Q., Shi, Y., Zhu, Z., & Zhang, D. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2014.09.020 · Cited by 526
Yadroitsev, I., Krakhmalev, P., & Yadroitsava, I. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.08.183 · Cited by 515
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
Tolosa, I., Garciandía, F., Zubiri, F., Zapirain, F., & Esnaola, A. (2010) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-2631-5 · Cited by 487
Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
Ming, T., & Pistorius, P. C. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.002 · Cited by 487
Mortensen, A., & Llorca, J. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104511 · Cited by 477
Li, R., Shi, Y., Wang, Z., Wang, L., Liu, J., & Jiang, W. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.02.030 · Cited by 473
Physical Aspects of Process Control in Selective Laser Sintering of Metals
Das, S. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310099 · Cited by 434
Song, B., Dong, S., Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.09.051 · Cited by 429
Olakanmi, E. O. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.03.009 · Cited by 418
Liu, Z. H., Zhang, D. Q., Sing, S. L., Chua, C. K., & Loh, L. E. (2014) · Materials Characterization · doi:10.1016/j.matchar.2014.05.001 · Cited by 415
Self-citationPowder flowability characterisation methodology for powder-bed-based metal additive manufacturing
Spierings, A. B., Voegtlin, M., Bauer, T., & Wegener, K. (2015) · Progress in Additive Manufacturing · doi:10.1007/s40964-015-0001-4 · Cited by 415
Sing, S. L., Yeong, W. Y., & Wiria, F. E. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.11.141 · Cited by 414
Self-citationLoh, L.-E., Chua, C.-K., Yeong, W.-Y., Song, J., Mapar, M., Sing, S.-L., Liu, Z.-H., & Zhang, D.-Q. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.09.014 · Cited by 408
Self-citationKimura, T., & Nakamoto, T. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.10.065 · Cited by 404
Multiscale Modeling of Powder Bed–Based Additive Manufacturing
Markl, M., & Körner, C. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032158 · Cited by 401
Saedi, S., Moghaddam, N. S., Amerinatanzi, A., Elahinia, M., & Karaca, H. E. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.072 · Cited by 391
Handbook of laser welding technologies
Katayama, S. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857098771 · Cited by 373
Yasa, E., Deckers, J., & Kruth, J. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156450 · Cited by 371
Calculation of laser absorption by metal powders in additive manufacturing
Boley, C. D., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Optics · doi:10.1364/ao.54.002477 · Cited by 371
Direct selective laser sintering and melting of ceramics: a review
Sing, S. L., Yeong, W. Y., Wiria, F. E., Tay, B. Y., Zhao, Z., Zhao, L., Tian, Z., & Yang, S. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0178 · Cited by 359
Self-citationThe challenge of ceramic/metal microcomposites and nanocomposites
Moya, J. S., Lopez-Esteban, S., & Pecharromán, C. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.09.003 · Cited by 358
Yadroitsev, I., Thivillon, L., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.046 · Cited by 351
Yang, J., Han, J. C., Yu, H., Yin, J., Gao, M. X., Wang, Z., & Zeng, X. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.08.036 · Cited by 346
Yuan, P., & Gu, D. (2015) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/48/3/035303 · Cited by 345
Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., Ashcroft, I., Wildman, R. D., & Hague, R. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2882-8 · Cited by 342
Characterization and Control of Powder Properties for Additive Manufacturing
Strondl, A., Lyckfeldt, O., Brodin, H., & Ackelid, U. (2015) · JOM · doi:10.1007/s11837-015-1304-0 · Cited by 340
Rafi, H. K., Starr, T. L., & Stucker, B. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5106-7 · Cited by 335
AlMangour, B., Grzesiak, D., & Jenn-MingYang (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.018 · Cited by 321
Heat transfer modelling and stability analysis of selective laser melting
Gusarov, A. V., Yadroitsev, I., Bertrand, P., & Smurov, I. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.08.074 · Cited by 314
Kaufmann, N., Imran, M., Wischeropp, T. M., et al. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.096 · Cited by 314
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.06.006 · Cited by 302
Self-citationStructural composites for multifunctional applications: Current challenges and future trends
González, C., Vilatela, J. J., Molina-Aldareguia, J. M., Lopes, C. S., & LLorca, J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.005 · Cited by 301
Origin of grain orientation during solidification of an aluminum alloy
Wei, H., Elmer, J. W., & DebRoy, T. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.057 · Cited by 296
Shi, Q., Gu, D., Xia, M., Cao, S., & Rong, T. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.04.009 · Cited by 292
Modeling the interaction of laser radiation with powder bed at selective laser melting
Gusarov, A. V., & Smurov, I. Y. (2010) · Physics Procedia · doi:10.1016/j.phpro.2010.08.065 · Cited by 284
Gu, D., Wang, H., Dai, D., Yuan, P., Meiners, W., & Poprawe, R. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2014.10.011 · Cited by 279
Solidification, structures, and properties of cast metal-ceramic particle composites
Rohatgi, P. K., Asthana, R., & Das, S. (1986) · International Metals Reviews · doi:10.1179/imtr.1986.31.1.115 · Cited by 279
AlMangour, B., Grzesiak, D., & Yang, J.-M. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.08.022 · Cited by 259
Direct Selective Laser Sintering of Hard Metal Powders: Experimental Study and Simulation
Wang, X. C., Laoui, T., Bonse, J., Kruth, J. P., Lauwers, B., & Froyen, L. (2002) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700200024 · Cited by 258
Gu, D., Hagedorn, Y.-C., Meiners, W., Wissenbach, K., & Poprawe, R. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.010 · Cited by 256
AlMangour, B., Grzesiak, D., Borkar, T., & Yang, J.-M. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.039 · Cited by 246
Selective laser melting of TiC/Ti bulk nanocomposites: Influence of nanoscale reinforcement
Gu, D., Meng, G., Li, C., Meiners, W., & Poprawe, R. (2012) · Scripta Materialia · doi:10.1016/j.scriptamat.2012.04.013 · Cited by 241
Ma, M., Wang, Z., Gao, M. X., & Zeng, X. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.07.034 · Cited by 240
Sing, S. L., Lam, L. P., Zhang, D. Q., Liu, Z. H., & Chua, C. K. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.07.007 · Cited by 238
Self-citationLi, W., Yang, Y., Liu, J., Zhou, Y., Li, M., Wen, S., Wei, Q., Yan, C., & Shi, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.003 · Cited by 234
Hao, L., Dadbakhsh, S., Seaman, O., & Felstead, M. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.06.012 · Cited by 233
On the role of thermal fluid dynamics into the evolution of porosity during selective laser melting
Panwisawas, C., Qiu, C. L., Sovani, Y., Brooks, J. W., Attallah, M. M., & Basoalto, H. C. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.04.016 · Cited by 228
Zhang, S., Wei, Q., Cheng, L., Li, S., & Shi, Y. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.05.021 · Cited by 219
Ductility improvement and fatigue studies in Mg-CNT nanocomposites
Goh, C. S., Wei, J., Lee, L. C., & Gupta, M. K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.10.057 · Cited by 213
Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM
Di, W., Yongqiang, Y., Xubin, S., & Yonghua, C. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3443-y · Cited by 213
Chang, F., Gu, D., Dai, D., & Yuan, P. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.04.029 · Cited by 210
Corrosion Behaviour of Selective Laser Melted Ti-TiB Biocomposite in Simulated Body Fluid
Chen, Y., Zhang, J., Dai, N., Qin, P., Attar, H., & Zhang, L.-C. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.02.112 · Cited by 207
Nanocrystalline TiC-reinforced H13 steel matrix nanocomposites fabricated by selective laser melting
AlMangour, B., Grzesiak, D., & Yang, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.022 · Cited by 205
Weld metal composition change during conduction mode laser welding of aluminum alloy 5182
Zhao, H., & Debroy, T. (2001) · Metallurgical and Materials Transactions B · doi:10.1007/s11663-001-0018-6 · Cited by 204
Fabbro, R., Slimani, S., Doudet, I., Coste, F., & Briand, F. (2006) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/39/2/023 · Cited by 199
Ghosh, S. K., & Saha, P. (2011) · Materials & Design · doi:10.1016/j.matdes.2010.06.020 · Cited by 190
Selective laser melting of aluminium and aluminium metal matrix composites: review
Sercombe, T. B., & Li, X. (2015) · Materials Technology · doi:10.1179/1753555715y.0000000078 · Cited by 188
AlMangour, B., Grzesiak, D., & Yang, J.-M. (2017) · Powder Technology · doi:10.1016/j.powtec.2016.12.073 · Cited by 176
Hasselman, D. P. H., Donaldson, K. Y., & Geiger, A. L. (1992) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1992.tb04400.x · Cited by 174
Cao, X., Wallace, W., Immarigeon, J.-P., & Poon, C. (2003) · Materials and Manufacturing Processes · doi:10.1081/amp-120017587 · Cited by 164
Dadbakhsh, S., & Hao, L. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.06.097 · Cited by 163
Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures
Hong, C., Gu, D., Dai, D., Gasser, A., Weisheit, A., Kelbassa, I., Zhong, M., & Poprawe, R. (2013) · Optics & Laser Technology · doi:10.1016/j.optlastec.2013.05.011 · Cited by 158
Saturated pool boiling of FC-72 from enhanced surfaces produced by Selective Laser Melting
Ho, J. Y., Wong, K. K., & Leong, K. C. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.03.073 · Cited by 158
A Review of Selective Laser Melted NiTi Shape Memory Alloy
Khoo, Z. X., Liu, Y., An, J., Chua, C., Shen, Y., & Kuo, C. N. (2018) · Materials · doi:10.3390/ma11040519 · Cited by 156
Self-citationKang, N., Coddet, P., Chen, C., Wang, Y., Liao, H., & Coddet, C. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.053 · Cited by 153
Han, Q., Setchi, R., & Evans, S. L. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.04.015 · Cited by 153
Li, X., Kang, C. W., Huang, H., & Sercombe, T. B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.022 · Cited by 151
Gu, D., Wang, Z., Shen, Y., Li, Q., & Li, Y. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.07.008 · Cited by 150
Dai, D., & Gu, D. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.07.044 · Cited by 147
Sing, S. L., Yeong, W. Y., Wiria, F. E., & Tay, B. Y. (2016) · Experimental Mechanics · doi:10.1007/s11340-015-0117-y · Cited by 147
Self-citationGu, D., Hagedorn, Y., Meiners, W., Wissenbach, K., & Poprawe, R. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2010.11.051 · Cited by 144
Attar, H., Bönisch, M., Calin, M., Zhang, L., Zhuravleva, K., Funk, A., Scudino, S., Yang, C. Q., & Eckert, J. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.122 · Cited by 139
Rong, T., Gu, D., Shi, Q., Cao, S., & Xia, M. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.09.011 · Cited by 139
Thermal and solutal Marangoni convection in In–Ga–Sb system
Arafune, K., & Hirata, A. (1999) · Journal of Crystal Growth · doi:10.1016/s0022-0248(98)01071-9 · Cited by 138
Nanoparticle-induced unusual melting and solidification behaviours of metals
Ma, C., Chen, L., Cao, C., & Li, X. (2017) · Nature Communications · doi:10.1038/ncomms14178 · Cited by 131
Crystal structure analysis of M2 high speed steel parts produced by selective laser melting
Liu, Z., Zhang, D. Q., Chua, C. K., & Leong, K. F. (2013) · Materials Characterization · doi:10.1016/j.matchar.2013.07.010 · Cited by 129
Self-citationEffect of energy per layer on the anisotropy of selective laser melted AlSi12 aluminium alloy
Rashid, R. A. R., Masood, S. H., Ruan, D., Palanisamy, S., Rashid, R. A. R., Elambasseril, J., & Brandt, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.05.040 · Cited by 129
Wei, Q., Li, S., Han, C., Li, W., Cheng, L., Hao, L., & Shi, Y. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.02.010 · Cited by 128
Mechanism of alloying element vaporization during laser welding
Collur, M. M., Paul, A. J., & DebRoy, T. (1987) · Metallurgical Transactions B · doi:10.1007/bf02672891 · Cited by 127
Gu, D., Ma, C., Xia, M., et al. (2017) · Engineering · doi:10.1016/j.eng.2017.05.011 · Cited by 127
AlMangour, B., Grzesiak, D., & Yang, J. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.01.019 · Cited by 125
Analysis of laser absorption on a rough metal surface
Ang, L. K., Lau, Y. Y., Gilgenbach, R. M., & Spindler, H. L. (1997) · Applied Physics Letters · doi:10.1063/1.118242 · Cited by 118
Li, X., Humbeeck, J. V., & Kruth, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.12.019 · Cited by 117
Convective heat transfer performance of airfoil heat sinks fabricated by selective laser melting
Ho, J. Y., Wong, K. K., Leong, K. C., & Wong, T. N. (2017) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.12.016 · Cited by 115
Song, B., Dong, S., Coddet, P., Zhou, G., Ouyang, S., Liao, H., & Coddet, C. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.06.087 · Cited by 114
Jue, J., Gu, D., Chang, K., & Dai, D. (2016) · Powder Technology · doi:10.1016/j.powtec.2016.12.079 · Cited by 114
Microstructural characterization and wear behavior of (Fe,Ni)–TiC MMC prepared by DMLS
Gåård, A., Krakhmalev, P., & Bergström, J. (2005) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2005.09.084 · Cited by 107
Liu, L. H., Yang, C. Q., Wang, F., Qu, S., Li, X., Zhang, W., Li, Y., & Zhang, L. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.04.032 · Cited by 99
Gu, D., & Yuan, P. (2015) · Journal of Applied Physics · doi:10.1063/1.4937905 · Cited by 98
Han, Q., Geng, Y., Setchi, R., Lacan, F., Gu, D., & Evans, S. L. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.06.026 · Cited by 94
Dadbakhsh, S., Hao, L., Jerrard, P. G. E., & Zhang, Z. (2012) · Powder Technology · doi:10.1016/j.powtec.2012.07.061 · Cited by 93
High-strength silicon brass manufactured by selective laser melting
Yang, C. Q., Zhao, Y., Kang, L. M., Li, D. D., Zhang, W. W., & Zhang, L. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.09.011 · Cited by 88
Study on Shrinkage Behaviour of Direct Laser Sintering Metallic Powder
Zhu, H. H., Lü, L., & Fuh, J. Y. H. (2006) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1243/095440505x32995 · Cited by 87
Selective Laser Melting (SLM) of pure gold
Khan, M., & Dickens, P. (2010) · Gold bulletin · doi:10.1007/bf03214976 · Cited by 84
An effective analytical model of selective laser melting
Yap, C. Y., Chua, C. K., & Dong, Z. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1133217 · Cited by 83
Self-citationMetallic vapor ejection effect on melt pool dynamics in deep penetration laser welding
Fabbro, R., Hamadou, M., & Coste, F. (2004) · Journal of Laser Applications · doi:10.2351/1.1642633 · Cited by 81
Zhang, L., Xu, J. Z., & Eckert, J. (2006) · Journal of Applied Physics · doi:10.1063/1.2234535 · Cited by 78
A molecular dynamics study of effective thermal conductivity in nanocomposites
Tian, Z., Hu, H., & Sun, Y. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.02.023 · Cited by 78
Fabrication of heat sinks by Selective Laser Melting for convective heat transfer applications
Wong, K. K., Ho, J. Y., Leong, K. C., & Wong, T. N. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1211849 · Cited by 78
Chan, C. L., Mazumder, J., & Chen, M. M. (1988) · Journal of Applied Physics · doi:10.1063/1.342121 · Cited by 77
Zhou, W., Sun, X., Kikuchi, K., Nomura, N., Yoshimi, K., & Kawasaki, A. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.034 · Cited by 77
Influence of Ni content on microstructure of W–Ni alloy produced by selective laser melting
Zhang, D. Q., Liu, Z., Cai, Q., Liu, J. H., & Chua, C. K. (2014) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2014.02.007 · Cited by 75
Self-citationDirect laser sintered WC-10Co/Cu nanocomposites
Gu, D., & Shen, Y. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.12.028 · Cited by 75
Liu, J., Li, J., & Xu, C. (2014) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2014.01.003 · Cited by 74
Steady Marangoni flow traveling with chemical fronts
Rongy, L., & Wit, A. D. (2006) · The Journal of Chemical Physics · doi:10.1063/1.2186313 · Cited by 68
Preparation of TiN–Ti5Si3 in-situ composites by Selective Laser Melting
Gu, D., Shen, Y., & Lu, Z. (2009) · Materials Letters · doi:10.1016/j.matlet.2009.04.010 · Cited by 67
He, B., Chang, K., Wu, W., & Zhang, C. (2017) · Vacuum · doi:10.1016/j.vacuum.2017.05.029 · Cited by 66
Gu, D., Shen, Y., & Meng, G. (2009) · Materials Letters · doi:10.1016/j.matlet.2009.08.043 · Cited by 56
Yang, Y., Wen, S., Wei, Q., Li, W., Liu, J., & Shi, Y. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.053 · Cited by 56
Kempen, K., Thijs, L., Vrancken, B., Buls, S., Humbeeck, J. V., & Kruth, J. (2013) · doi:10.26153/tsw/15419 · Cited by 55
Melt pool dynamics during selective electron beam melting
Scharowsky, T., Osmanlic, F., Singer, R. F., & Körner, C. (2013) · Applied Physics A · doi:10.1007/s00339-013-7944-4 · Cited by 54
Formation mechanism of porosity in high power YAG laser welding
Katayama, S., Seto, N., Mizutani, M., & Matsunawa, A. (2000) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5059433 · Cited by 52
Ma, C., Zhao, J., Cao, C., Lin, T. H., & Li, X. (2016) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4033446 · Cited by 48
Gu, D., & Shen, Y. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.07.105 · Cited by 47
Multivortex convection of metal in molten pool with dispersed impurity induced by laser radiation
Kovalev, O. B., & Gurin, A. M. (2013) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.09.031 · Cited by 46
Inclusions, Porosity, and Fatigue of AlSi10Mg Parts Produced by Selective Laser Melting
Tang, M. (2017) · KiltHub Repository · doi:10.1184/r1/6720185 · Cited by 46
Zheng, B., Smugeresky, J. E., Zhou, Y., Baker, D. M., & Lavernia, E. J. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9498-1 · Cited by 41
Nanostructured Zr- and Ti-based composite materials with high strength and enhanced plasticity
Kühn, U., Mattern, N., Gebert, A., Kusý, M., Boström, M., Siegel, U., & Schultz, L. (2005) · Journal of Applied Physics · doi:10.1063/1.2012507 · Cited by 40
CO 2 and Nd:YAG laser beam welding of 6111-T4 aluminum alloy for automotive applications
Ramasamy, S., & Albright, C. E. (2000) · Journal of Laser Applications · doi:10.2351/1.521923 · Cited by 38
Wu, W., Tor, S. B., Chua, C. K., Leong, K. F., & Merchant, A. A. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1106091 · Cited by 36
Self-citationMa, C., Zhao, J., Cao, C., Lin, T. H., & Li, X. (2016) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4033392 · Cited by 29
Characteristic length of the solidified melt pool in selective laser melting process
Ahn, I. H., Moon, S. K., Hwang, J., & Bi, G. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-06-2015-0076 · Cited by 23
Energy efficiency contributions and losses during selective laser melting
Mishra, P., Ilar, T., Brueckner, F. P., & Kaplan, A. F. H. (2018) · Journal of Laser Applications · doi:10.2351/1.5040603 · Cited by 22
Thermal Conductivity of Particulate Nanocomposites
Ordoñez-Miranda, J., Yang, R., & Alvarado-Gil, J. J. (2013) · Lecture notes in nanoscale science and technology · doi:10.1007/978-3-319-02012-9_3 · Cited by 16
Mahamood, R. M., & Akinlabi, E. T. (2017) · Materials Science · doi:10.1007/s11003-017-0046-2 · Cited by 16
GEOMETRIC MODEL TO PREDICT POROSITY OF PART PRODUCED IN POWDER BED SYSTEM
Ming, T., Christiaan, P. P., & Jack, B. R. (2015) · Materials Science & Technology Conference and Exhibition · Cited by 14
Cited by
Sanaei, N., & Fatemi, A. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100724 · Cited by 1,029
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Self-citationMetallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
Recent Advances on High‐Entropy Alloys for 3D Printing
Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K. (2020) · Advanced Materials · doi:10.1002/adma.201903855 · Cited by 486
Self-citation
Metadata
- Authors
- Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 104
- Pages
- 330-379
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2941420794
- Cited by
- 586
- References
- 184
- FWCI
- 34.05
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.