The DOI matches its Crossref record; 161 of the 161 references it cites were found in a registry or an index.
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
Abstract
Abstract Additive manufacturing (AM) is emerging as an alternative to conventional subtractive manufacturing methods with the goal to deliver unique and complex net or near-net shaped parts. AM components should operate under various loading conditions, from static to complex dynamic multiaxial loadings, therefor, fatigue performance is often a key consideration. Intrinsic AM defects such as Lack of Fusion (LOF) defects, porosities, and un-melted particles are important for fatigue as a local phenomenon which usually starts at stress concentrations. Defects can be minimized by process optimization and/or post-processing but may not be fully eliminated. Full-scale testing, which is typically very costly and often necessary to assess reliability for fatigue performance of safety critical components, could be reduced by robust analytical fatigue performance prediction techniques. This work reviews the literature on the influential microstructural attributes on fatigue performance of AM parts with a focus on generated defects. This includes AM defect characterization and statistical analysis methods, as well as effect of process parameters and post-processing on defects, and consequently fatigue performance. The review also includes defect-based, microstructure-sensitive, and multiscale models proposed in the literature for modeling the effect of defects on fatigue performance and provides an outlook for additional research needed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Average stress in matrix and average elastic energy of materials with misfitting inclusions
Mori, T., & Tanaka, K. (1973) · Acta Metallurgica · doi:10.1016/0001-6160(73)90064-3 · Cited by 8,189
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Metal Fatigue in Engineering (1980)
Fuchs, H. O., Stephens, R. I., & Saunders, H. (1981) · Journal of Engineering Materials and Technology · doi:10.1115/1.3225026 · Cited by 1,933
Thijs, L., Kempen, K., Kruth, J.-P., & Van Humbeeck, J. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.11.052 · Cited by 1,917
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.11.011 · Cited by 1,475
Metal fatigue : effects of small defects and nonmetallic inclusions
村上, 敬. (2002) · Elsevier eBooks · Cited by 1,457
Stephens, R. I., & Fuchs, H. O. (1980) · Wiley eBooks · Cited by 1,377
Lemaitre, J. (1984) · Nuclear Engineering and Design · doi:10.1016/0029-5493(84)90169-9 · Cited by 1,373
Vilaro, T., Colin, C., & Bartout, J. D. (2011) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-011-0731-y · Cited by 1,283
Effects of defects, inclusions and inhomogeneities on fatigue strength
MURAKAMI, Y., & Endo, M. (1994) · International Journal of Fatigue · doi:10.1016/0142-1123(94)90001-9 · Cited by 1,202
Brandl, E., Heckenberger, U., Holzinger, V., & Buchbinder, D. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.07.067 · Cited by 1,151
Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions
MURAKAMI, Y. (2002) · Cited by 1,150
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Mower, T. M., & Long, M. J. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.068 · Cited by 1,001
Rafi, H. K., Karthik, N. V., Gong, H., Starr, T. L., & Stucker, B. E. (2013) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-013-0658-0 · Cited by 987
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Gong, H., Rafi, K., Gu, H., Janaki Ram, G. D., Starr, T., & Stucker, B. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.07.147 · Cited by 940
Gorsse, S., Hutchinson, C., Gouné, M., & Banerjee, R. (2017) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2017.1361305 · Cited by 920
Surface roughness analysis, modelling and prediction in selective laser melting
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.011 · Cited by 876
Fatigue performance evaluation of selective laser melted Ti–6Al–4V
Edwards, P., & Ramulu, M. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2014.01.041 · Cited by 874
Kasperovich, G., Haubrich, J., Gussone, J., & Requena, G. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.070 · Cited by 818
The physics of fatigue crack initiation
Sangid, M. D. (2013) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2012.10.009 · Cited by 768
Surface texture metrology for metal additive manufacturing: a review
Townsend, A., Senin, N., Blunt, L., Leach, R. K., & Taylor, J. S. (2016) · Precision Engineering · doi:10.1016/j.precisioneng.2016.06.001 · Cited by 743
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Kasperovich, G., & Hausmann, J. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.01.025 · Cited by 735
du Plessis, A., Yadroitsava, I., & Yadroitsev, I. (2020) · Materials & Design · doi:10.1016/j.matdes.2019.108385 · Cited by 712
Dynamics of pore formation during laser powder bed fusion additive manufacturing
Martin, A. A., Calta, N. P., Khairallah, S. A., Wang, J., Depond, P. J., Fong, A. Y., Thampy, V., Guss, G. M., Kiss, A. M., Stone, K. H., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10009-2 · Cited by 711
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.03.008 · Cited by 669
Beretta, S., & Romano, S. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.020 · Cited by 635
Yadollahi, A., Shamsaei, N., Thompson, S. M., Elwany, A., & Bian, L. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.03.014 · Cited by 609
Microstructure-sensitive computational modeling of fatigue crack formation
McDowell, D. L., & Dunne, F. P. E. (2010) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2010.01.003 · Cited by 602
Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
du Plessis, A., Yadroitsev, I., Yadroitsava, I., & Le Roux, S. G. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2018.0060 · Cited by 550
Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.020 · Cited by 539
Printability of alloys for additive manufacturing
Mukherjee, T., Zuback, J. S., De, A., & DebRoy, T. (2016) · Scientific Reports · doi:10.1038/srep19717 · Cited by 523
X-ray computed tomography for additive manufacturing: a review
Thompson, A., Maskery, I., & Leach, R. K. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/7/072001 · Cited by 521
Additive Manufacturing of Metallic Materials: A Review
Zhang, Y., Wu, L., Guo, X., Kane, S., Deng, Y., Jung, Y.-G., Lee, J.-H., & Zhang, J. (2018) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2747-y · Cited by 521
Romano, S., Brückner-Foit, A., Brandão, A., Gumpinger, J., Ghidini, T., & Beretta, S. (2018) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2017.11.002 · Cited by 521
Effects of Defects in Laser Additive Manufactured Ti-6Al-4V on Fatigue Properties
Wycisk, E., Solbach, A., Siddique, S., Herzog, D., Walther, F., & Emmelmann, C. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.120 · Cited by 509
The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2017) · Scientific Reports · doi:10.1038/s41598-017-06504-5 · Cited by 494
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
Günther, J., Krewerth, D., Lippmann, T., Leuders, S., Tröster, T., Weidner, A., Biermann, H., & Niendorf, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.018 · Cited by 475
Modeling of additive manufacturing processes for metals: Challenges and opportunities
Francois, M. M., Sun, A., King, W. E., Henson, N. J., Tourret, D., Bronkhorst, C. A., Carlson, N. N., Newman, C. K., Haut, T., Bakosi, J., et al. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.001 · Cited by 462
Electron Beam Additive Manufacturing of Titanium Components: Properties and Performance
Edwards, P., O'Conner, A., & Ramulu, M. (2013) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4025773 · Cited by 450
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
Mumtaz, K., & Hopkinson, N. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910943397 · Cited by 429
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J. (2017) · JOM · doi:10.1007/s11837-017-2265-2 · Cited by 422
Loh, L.-E., Chua, C.-K., Yeong, W.-Y., Song, J., Mapar, M., Sing, S.-L., Liu, Z.-H., & Zhang, D.-Q. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.09.014 · Cited by 408
Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control
Slotwinski, J. A., Garboczi, E. J., & Hebenstreit, K. M. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.019 · Cited by 408
The influence of additive manufacturing processing parameters on surface roughness and fatigue life
Gockel, J., Sheridan, L., Koerper, B., & Whip, B. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.025 · Cited by 405
Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Greitemeier, D., Palm, F., Syassen, F., & Melz, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.05.001 · Cited by 385
Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V
Greitemeier, D., Donne, C. D., Syassen, F., Eufinger, J., & Melz, T. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000053 · Cited by 379
Surface roughness effects on the fatigue strength of additively manufactured Ti-6Al-4V
Pegues, J., Roach, M., Scott Williamson, R., & Shamsaei, N. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.013 · Cited by 378
Microstructure-based fatigue modeling of cast A356-T6 alloy
McDowell, D. L., Gall, K., Horstemeyer, M. F., & Fan, J. H. (2002) · Engineering Fracture Mechanics · doi:10.1016/s0013-7944(02)00021-8 · Cited by 377
Bagehorn, S., Wehr, J., & Maier, H. J. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.05.008 · Cited by 371
Hrabe, N., Gnäupel-Herold, T., & Quinn, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.022 · Cited by 355
Aboulkhair, N. T., Maskery, I., Tuck, C. J., Ashcroft, I., & Everitt, N. M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.041 · Cited by 347
Rafi, H. K., Starr, T. L., & Stucker, B. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5106-7 · Cited by 335
Cunningham, R., Narra, S. P., Montgomery, C., Beuth, J., & Rollett, A. D. (2017) · JOM · doi:10.1007/s11837-016-2234-1 · Cited by 334
Chan, K. S., Koike, M., Mason, R. L., & Okabe, T. (2013) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1470-4 · Cited by 320
A perspective on trends in multiscale plasticity
McDowell, D. L. (2010) · International Journal of Plasticity · doi:10.1016/j.ijplas.2010.02.008 · Cited by 305
Yu, W., Sing, S. L., Chua, C. K., & Tian, X. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.04.017 · Cited by 303
Gas flow effects on selective laser melting (SLM) manufacturing performance
Ferrar, B., Mullen, L., Jones, E., Stamp, R., & Sutcliffe, C. J. (2012) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.09.020 · Cited by 302
Defect characteristics and analysis of their variability in metal L-PBF additive manufacturing
Sanaei, N., Fatemi, A., & Phan, N. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108091 · Cited by 301
Self-citationBenedetti, M., Fontanari, V., Bandini, M., Zanini, F., & Carmignato, S. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.10.021 · Cited by 297
Seifi, M., Salem, A. A., Satko, D. P., Shaffer, J., & Lewandowski, J. J. (2016) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.06.001 · Cited by 291
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.05.002 · Cited by 288
Fatemi, A., Molaei, R., Sharifimehr, S., Phan, N., & Shamsaei, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.03.044 · Cited by 282
Self-citationTammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3429-3 · Cited by 269
Qualification of AM parts: Extreme value statistics applied to tomographic measurements
Romano, S., Brandão, A., Gumpinger, J., Gschweitl, M., & Beretta, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.05.091 · Cited by 269
Yadollahi, A., Mahtabi, M. J., Khalili, A., Doude, H., & Newman, J. C. (2018) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12799 · Cited by 269
Chen, J., Yang, Y., Song, C., Zhang, M., Wu, S., & Wang, D. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.02.097 · Cited by 269
Microstructure modelling for metallic additive manufacturing: a review
Tan, J. H. K., Sing, S. L., & Yeong, W. Y. (2020) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1677345 · Cited by 266
Aydinöz, M. E., Brenne, F., Schaper, M., Schaak, C., Tillmann, W., Nellesen, J., & Niendorf, T. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.05.089 · Cited by 265
Molaei, R., Fatemi, A., Sanaei, N., Pegues, J., Shamsaei, N., Shao, S., Li, P., Warner, D. H., & Phan, N. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.105363 · Cited by 264
Self-citationCunningham, R., Nicolas, A., Madsen, J., Fodran, E., Anagnostou, E., Sangid, M. D., & Rollett, A. D. (2017) · Materials Research Letters · doi:10.1080/21663831.2017.1340911 · Cited by 259
Smith, J., Xiong, W., Yan, W., Lin, S., Cheng, P., Kafka, O. L., Wagner, G. J., Cao, J., & Liu, W. K. (2016) · Computational Mechanics · doi:10.1007/s00466-015-1240-4 · Cited by 255
Karlsson, J., Snis, A., Engqvist, H., & Lausmaa, J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.06.010 · Cited by 254
Surface texture measurement for additive manufacturing
Triantaphyllou, A., Giusca, C. L., Macaulay, G. D., Roerig, F., Hoebel, M., Leach, R. K., Tomita, B., & Milne, K. A. (2015) · Surface Topography: Metrology and Properties · doi:10.1088/2051-672x/3/2/024002 · Cited by 252
du Plessis, A., & Macdonald, E. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101191 · Cited by 246
Ti-6Al-4V Additively Manufactured by Selective Laser Melting with Superior Mechanical Properties
Xu, W., Sun, S., Elambasseril, J., Liu, Q., Brandt, M., & Qian, M. (2015) · JOM · doi:10.1007/s11837-015-1297-8 · Cited by 244
Sing, S. L., Lam, L. P., Zhang, D. Q., Liu, Z. H., & Chua, C. K. (2015) · Materials Characterization · doi:10.1016/j.matchar.2015.07.007 · Cited by 238
Pegues, J. W., Shao, S., Shamsaei, N., Sanaei, N., Fatemi, A., Warner, D. H., Li, P., & Phan, N. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.105358 · Cited by 236
Self-citationChastand, V., Quaegebeur, P., Maia, W., & Charkaluk, E. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.03.028 · Cited by 234
Wang, F. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3423-2 · Cited by 233
Dallago, M., Winiarski, B., Zanini, F., Carmignato, S., & Benedetti, M. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.019 · Cited by 222
Facchini, L., Vicente, N., Lonardelli, I., Magalini, E., Robotti, P., & Molinari, A. (2010) · Advanced Engineering Materials · doi:10.1002/adem.200900259 · Cited by 218
MURAKAMI, Y., & Beretta, S. (1999) · Extremes · doi:10.1023/a:1009976418553 · Cited by 218
High Cycle Fatigue (HCF) Performance of Ti-6Al-4V Alloy Processed by Selective Laser Melting
Wycisk, E., Emmelmann, C., Siddique, S., & Walther, F. (2013) · Advanced Materials Research · doi:10.4028/www.scientific.net/amr.816-817.134 · Cited by 215
Ziółkowski, G., Chlebus, E., Szymczyk, P., & Kurzac, J. (2014) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2014.02.003 · Cited by 210
MURAKAMI, Y. (1994) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.099.032 · Cited by 210
Sanaei, N., & Fatemi, A. (2020) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2020.102638 · Cited by 209
Self-citationWang, J. C., Liu, Y. J., Qin, P., Liang, S. X., Sercombe, T. B., & Zhang, L. C. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.06.001 · Cited by 208
Romano, S., Nezhadfar, P. D., Shamsaei, N., Seifi, M., & Beretta, S. (2020) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2020.102477 · Cited by 205
Fatemi, A., Molaei, R., Simsiriwong, J., Sanaei, N., Pegues, J., Torries, B., Phan, N., & Shamsaei, N. (2019) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.13000 · Cited by 199
Self-citationInfluence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V
Åkerfeldt, P., Antti, M., & Pederson, R. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.07.038 · Cited by 196
Wycisk, E., Siddique, S., Herzog, D., Walther, F., & Emmelmann, C. (2015) · Frontiers in Materials · doi:10.3389/fmats.2015.00072 · Cited by 193
Molaei, R., Fatemi, A., & Phan, N. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.035 · Cited by 191
Self-citationPorosity testing methods for the quality assessment of selective laser melted parts
Wits, W. W., Carmignato, S., Zanini, F., & Vaneker, T. H. J. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.04.054 · Cited by 190
Masuo, H., Tanaka, Y., Morokoshi, S., Yagura, H., Uchida, T., Yamamoto, Y., & Murakami, Y. (2017) · Procedia Structural Integrity · doi:10.1016/j.prostr.2017.11.055 · Cited by 190
Fatigue crack growth and damage tolerance
Jones, R. (2014) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12155 · Cited by 189
Cyclic deformation and fatigue behavior of additively manufactured 17–4 PH stainless steel
Carneiro, L., Jalalahmadi, B., Ashtekar, A., & Jiang, Y. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.02.006 · Cited by 180
Brenne, F., Niendorf, T., & Maier, H. J. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.03.013 · Cited by 174
Vayssette, B., Saintier, N., Brugger, C., El May, M., & Pessard, E. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.02.014 · Cited by 174
Microstructure-based multistage fatigue modeling of aluminum alloy 7075-T651
Xue, Y., McDowell, D. L., Horstemeyer, M. F., Dale, M. H., & Jordon, J. B. (2007) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2006.12.031 · Cited by 171
Multi-material selective laser melting of Fe/Al-12Si components
Demir, A. G., & Previtali, B. (2017) · Manufacturing Letters · doi:10.1016/j.mfglet.2017.01.002 · Cited by 167
Nezhadfar, P. D., Shrestha, R., Phan, N., & Shamsaei, N. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.02.039 · Cited by 166
Gu, H., Gong, H., Pal, D., Rafi, K., Starr, T. L., & Stucker, B. E. (2013) · doi:10.26153/tsw/15572 · Cited by 166
Meneghetti, G., Rigon, D., & Gennari, C. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.08.034 · Cited by 164
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2018.08.006 · Cited by 163
Fatemi, A., Molaei, R., Sharifimehr, S., Shamsaei, N., & Phan, N. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.03.002 · Cited by 161
Self-citationEdwards, P. D., & RAMULU, M. (2015) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12303 · Cited by 155
Romano, S., Abel, A. M., Gumpinger, J., Brandão, A. D., & Beretta, S. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.05.017 · Cited by 154
Seifi, M., Salem, A. A., Satko, D. P., Ackelid, U., Semiatin, S. L., & Lewandowski, J. J. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.09.163 · Cited by 150
Kuo, C. N., Chua, C. K., Peng, P. C., Chen, Y.-W., Sing, S. L., Huang, S., & Su, Y. L. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1698967 · Cited by 150
Zhang, H., Chiang, R., Qin, H., Ren, Z., Hou, X., Lin, D. L., Doll, G. L., Vasudevan, V. K., Dong, Y., & Ye, C. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2017.05.019 · Cited by 148
Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting
Leuders, S., Vollmer, M., Brenne, F., Tröster, T., & Niendorf, T. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2864-x · Cited by 146
Tey, C. F., Tan, X., Sing, S. L., & Yeong, W. Y. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100970 · Cited by 146
Characterization of typical surface effects in additive manufacturing with confocal microscopy
Grimm, T., Wiora, G., & Witt, G. (2015) · Surface Topography Metrology and Properties · doi:10.1088/2051-672x/3/1/014001 · Cited by 141
Roudnická, M., Vojtěch, D., Doubrava, K., Daniel, M., & Lin, C. (2018) · Materials · doi:10.3390/ma11040537 · Cited by 141
Kang, N., Coddet, P., Dembinski, L., Liao, H., & Coddet, C. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.08.249 · Cited by 132
Han, Q., & Jiao, Y. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-03272-y · Cited by 132
Zhang, X., Martina, F., Ding, J., Wang, X., & Williams, S. (2016) · Fatigue & Fracture of Engineering Materials & Structures · doi:10.1111/ffe.12547 · Cited by 131
Zhang, J., & Fatemi, A. (2019) · Theoretical and Applied Fracture Mechanics · doi:10.1016/j.tafmec.2019.102260 · Cited by 129
Self-citationWang, F., Wu, X., & Clark, D. (2010) · Materials Science and Technology · doi:10.1179/026708309x12578491814591 · Cited by 126
Xiaoli, S., Yamanaka, K., Mori, M., Nagata, Y., Kenya, K., & Chiba, A. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.10.059 · Cited by 117
An energy-based microstructure model to account for fatigue scatter in polycrystals
Sangid, M. D., Maier, H. J., & Huseyin Sehitoglu, B. (2011) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2010.12.014 · Cited by 116
Microporosity effects on cyclic plasticity and fatigue of LENS™-processed steel
Xue, Y., Pascu, A. M., Horstemeyer, M. F., Wang, L., & Wang, P. T. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.03.014 · Cited by 104
Shi, G. Y., Atkinson, H. V., Sellars, C. M., & Anderson, C. W. N. (1999) · Acta Materialia · doi:10.1016/s1359-6454(99)00034-8 · Cited by 99
LCF behaviour and a comprehensive life prediction model for AlSi10Mg obtained by SLM
Romano, S., Patriarca, L., Foletti, S., & Beretta, S. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.07.030 · Cited by 99
Microstructural Characterization of Laser-Deposited Al 4047 Alloy
Dinda, G. P., Dasgupta, A. K., Bhattacharya, S., Natu, H., Dutta, B., & Mazumder, J. (2012) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-012-1560-3 · Cited by 98
Benedetti, M., & Santus, C. (2018) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2018.12.020 · Cited by 97
Fatigue life estimation of additive manufactured parts in the as‐built surface condition
Pegues, J., Shamsaei, N., Roach, M. D., & Williamson, S. (2019) · Material Design & Processing Communications · doi:10.1002/mdp2.36 · Cited by 91
Gong, H., Rafi, K., Starr, T. L., & Stucker, B. E. (2013) · Texas Digital Library (University of Texas) · doi:10.26153/tsw/15565 · Cited by 91
Kantzos, C., Cunningham, R., Tari, V., & Rollett, A. D. (2017) · Computational Mechanics · doi:10.1007/s00466-017-1531-z · Cited by 79
Fatigue limit of Ti6Al4V alloy produced by Selective Laser Sintering
Benedetti, M., Cazzolli, M., Fontanari, V., & Leoni, M. (2016) · Procedia Structural Integrity · doi:10.1016/j.prostr.2016.06.394 · Cited by 78
Molaei, R., Fatemi, A., & Phan, N. (2020) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2020.105646 · Cited by 76
Self-citationHigh Cycle Fatigue of Laser Beam Deposited Ti-6Al-4V and Inconel 718
Amsterdam, E., & Kool, G. A. (2009) · Springer eBooks · doi:10.1007/978-90-481-2746-7_71 · Cited by 75
Lipiński, P., Barbas, A., & Bonnet, A.-S. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.08.011 · Cited by 68
Zhang, H., Dong, D., Su, S., & An, C. H. E. N. (2019) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2018.12.007 · Cited by 62
Siddique, S., Awd, M., Tenkamp, J., & Walther, F. (2017) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2017.03.015 · Cited by 61
Yamashita, Y., Murakami, T., Mihara, R., Okada, M., & MURAKAMI, Y. (2017) · Procedia Structural Integrity · doi:10.1016/j.prostr.2017.11.054 · Cited by 61
On the Determination of Fatigue Properties of Ti6Al4V Produced by Selective Laser Melting
Hooreweder, B. V., Boonen, R., Moens, D., Kruth, J., & Sas, P. (2012) · AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (SDM) · doi:10.2514/6.2012-1733 · Cited by 51
INFLUENCE OF ROUGH AS-BUILT SURFACES ON SMOOTH AND NOTCHED FATIGUE BEHAVIOR OF L-PBF AlSi10Mg
Nicoletto, G. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101251 · Cited by 50
Li, P., Warner, D. H., Pegues, J., Roach, M. D., Shamsaei, N., & Phan, N. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.05.004 · Cited by 48
Crack Propagation in Additive Manufactured Materials and Structures
Riemer, A., & Richard, H. A. (2016) · Procedia Structural Integrity · doi:10.1016/j.prostr.2016.06.157 · Cited by 47
Rekedal, K. D., & Liu, D. (2015) · CRC Press eBooks · doi:10.1201/9781003537762-33 · Cited by 46
Modeling of Processing-Induced Pore Morphology in an Additively-Manufactured Ti-6Al-4V Alloy
Kabir, M., & Richter, H. (2017) · Materials · doi:10.3390/ma10020145 · Cited by 46
Inclusions, Porosity, and Fatigue of AlSi10Mg Parts Produced by Selective Laser Melting
Tang, M. (2017) · KiltHub Repository · doi:10.1184/r1/6720185 · Cited by 46
Utilization of a microstructure sensitive fatigue model for additively manufactured Ti-6Al-4V
Torries, B., Sterling, A. J., Shamsaei, N., Thompson, S. M., & Daniewicz, S. R. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0168 · Cited by 44
Shrestha, R., Simsiriwong, J., Shamsaei, N., Thompson, S. M., & Bian, L. (2016) · Cited by 29
Zhang, Y., Hu, X., & Jiang, Y. (2020) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-020-04844-4 · Cited by 26
Effect of heat treatment on fatigue crack initiation of laser powder bed fusion stainless steel 316L
Zhang, M., Sun, C., Zhang, X., Goh, P. C., Wei, J., Hardacre, D., & Li, H. L. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201816522006 · Cited by 24
Li, P., Warner, D. H., & Phan, N. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101230 · Cited by 22
Fatigue Behavior of Selective Laser Melted 17-4 PH Stainless Steel
Yadollahi, A., Shamsaei, N., Thompson, S. M., Elwany, A. H., Bian, L., & Mahmoudi, M. (2015) · Cited by 20
Charles, A., Elkaseer, A., Müller, T., Thijs, L., Torge, M., Hagenmeyer, V., & Scholz, S. G. (2018) · World Congress on Micro and Nano Manufacturing (WCMNM) · doi:10.3850/978-981-11-2728-1_57 · Cited by 13
Pegues, J., Roach, M. D., & Shamsaei, N. (2020) · JOM · doi:10.1007/s11837-019-03983-x · Cited by 13
Cited by
Metal additive manufacturing in aerospace: A review
Blakey-Milner, B., Gradl, P., Snedden, G., Brooks, M., Pitot, J., Lopez, E., Leary, M., Berto, F., & du Plessis, A. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110008 · Cited by 2,263
Withers, P. J., Bouman, C., Carmignato, S., Cnudde, V., Grimaldi, D., Hagen, C. K., Maire, E., Manley, M., Du Plessis, A., & Stock, S. R. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00015-4 · Cited by 1,079
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Heat treatment for metal additive manufacturing
Laleh, M., Sadeghi, E., Revilla, R. I., Chao, Q., Haghdadi, N., Hughes, A. E., Xu, W., De Graeve, I., Qian, M., Gibson, I., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101051 · Cited by 538
Metadata
- Authors
- Sanaei, N., & Fatemi, A.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 117
- Pages
- 100724
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W3061569788
- Cited by
- 1,029
- References
- 161
- FWCI
- 48.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.